Self-Assembled Monolayers of Bi-Functionalized Porphyrins: A Novel Class of Hole-Layer-Coordinating Perovskites and Indium Tin Oxide in Inverted Solar Cells.

Self-assembled monolayers (SAMs) offer the advantage of facile interfacial modification, leading to significant improvements in device performance. In this study, we report the design and synthesis of a new series of carboxylic acid-functionalized porphyrin derivatives, namely AC-1, AC-3, and AC-5, and present, for the first time, a strategy to exploit the large π-moiety of porphyrins as a backbone for interfacing the indium tin oxide (ITO) electrode and perovskite active layer in an inverted perovskite solar cell (PSC) configuration. The electron-rich nature of porphyrins facilitates hole transfer and the formation of SAMs, resulting in a dense surface that minimizes defects. Comprehensive spectroscopic and dynamic studies demonstrate that the double-anchored AC-3 and AC-5 enhance SAMs on ITO, passivate the perovskite layer, and function as conduits to facilitate hole transfer, thus significantly boosting the performance of PSCs. The champion inverted PSC employing AC-5 SAM achieves an impressive solar efficiency of 23.19 % with a high fill factor of 84.05 %. This work presents a novel molecular engineering strategy for functionalizing SAMs to tune the energy levels, molecular dipoles, packing orientations to achieve stable and efficient solar performance. Importantly, our comprehensive investigation has unraveled the associated mechanisms, offering valuable insights for future advancements in PSCs.

One-step, room-temperature synthesis of glutathione-capped iron-oxide nanoparticles and their application in in vivo T1-weighted magnetic resonance imaging.

The room-temperature, aqueous-phase synthesis of iron-oxide nanoparticles (IO NPs) with glutathione (GSH) is reported. The simple, one-step reduction involves GSH as a capping agent and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as the reducing agent; GSH is an anti-oxidant that is abundant in the human body while THPC is commonly used in the synthesis of noble-metal clusters. Due to their low magnetization and good water-dispersibility, the resulting GSH-IO NPs, which are 3.72 ± 0.12 nm in diameter, exhibit a low r2 relaxivity (8.28 mm(-1) s(-1)) and r2/r1 ratio (2.28)--both of which are critical for T1 contrast agents. This, together with the excellent biocompatibility, makes these NPs an ideal candidate to be a T1 contrast agent. Its capability in cellular imaging is illustrated by the high signal intensity in the T1-weighted magnetic resonance imaging (MRI) of treated HeLa cells. Surprisingly, the GSH-IO NPs escape ingestion by the hepatic reticuloendothelial system, enabling strong vascular enhancement at the internal carotid artery and superior sagittal sinus, where detection of the thrombus is critical for diagnosing a stroke. Moreover, serial T1- and T2-weighted time-dependent MR images are resolved for a rat's kidneys, unveiling detailed cortical-medullary anatomy and renal physiological functions. The newly developed GSH-IO NPs thus open a new dimension in efforts towards high-performance, long-circulating MRI contrast agents that have biotargeting potential.

Antiferromagnetic iron nanocolloids: a new generation in vivo T1 MRI contrast agent.

A novel T1 agent, antiferromagnetic α-iron oxide-hydroxide (α-FeOOH) nanocolloids with a diameter of 2-3 nm, has been successfully prepared. These nanocolloids, together with a post synthetic strategy performed in mesoporous silica, are a great improvement over the low T1-weighted contrast common in traditional magnetic silica nanocomposites. The intrinsic antiferromagnetic goethite (α-FeOOH) shows very low magnetization (M(z)) of 0.05 emu g(-1) at H = 2 T at 300 K (0.0006 emu g(-1) for FeOOH/WMSN-PEG), which is 2 orders of magnitude smaller than any current ultrasmall iron oxide NPs (>5 emu g(-1)) reported to date, hence ensuring the low r2 (∝ Mz) (7.64 mM(-1) s(-1)) and r2/r1 ratio (2.03) at 4.7 T. These biodegradable α-FeOOH nanocolloids also demonstrate excellent in vitro cellular imaging and in vivo MR vascular and urinary trace imaging capability with outstanding biocompatibility, which is exceptionally well secreted by the kidney and not the liver as with most nanoparticles, opening up a new avenue for designing powerful antiferromagnetic iron T1 contrast agents.

In vivo metabolic imaging of insulin with multiphoton fluorescence of human insulin-Au nanodots.

Functional human insulin-Au nanodots (NDs) are synthesized for the in vivo imaging of insulin metabolism. Benefiting from its efficient red to near infrared fluorescence, deep tissue subcellular uptake of insulin-Au NDs can be clearly resolved through a least-invasive harmonic generation and two-photon fluorescence (TPF) microscope. In vivo investigations on mice ear and ex vivo assays on human fat tissues conclude that cells with rich insulin receptors have higher uptake of administrated insulin. Interestingly, the insulin-Au NDs can even permeate into lipid droplets (LDs) of adipocytes. Using this newly discovered metabolic phenomenon of insulin, it is found that enlarged adipocytes in type II diabetes mice have higher adjacent/LD concentration contrast with small-sized ones in wild type mice. For human clinical samples, the epicardial adipocytes of patients with diabetes and coronary artery disease (CAD) also show elevated adjacent/LD concentration contrast. As a result, human insulin-Au nanodots provide a new approach to explore subcellular insulin metabolism in model animals or patients with metabolic or cardiovascular diseases.

Modulation of Perovskite Grain Boundaries by Electron Donor-Acceptor Zwitterions R,R-Diphenylamino-phenyl-pyridinium-(CH2) n -sulfonates: All-Round Improvement on the Solar Cell Performance.

Inverted perovskite solar cells (PSCs) have attracted intense attention because of their insignificant hysteresis and low-temperature fabrication process. However, the efficiencies of inverted PSCs are still inferior to those of commercialized silicon solar cells. Also, the poor stability of PSCs is one of the major impedances to commercialization. Herein, we rationally designed and synthesized a new series of electron donor (R,R-diphenylamino) and acceptor (pyridimium-(CH2) n -sulfonates) zwitterions as a boundary modulator and systematically investigated their associated interface properties. Comprehensive physical and optoelectronic studies verify that these zwitterions provide a four-in-one functionality: balancing charge carrier transport, suppressing less-coordinated Pb2+ defects, enhancing moisture resistance, and reducing ion migration. Although each functionality may have been reported by specific passivating molecules, a strategy that simultaneously regulates the charge-transfer balance and three other functionalities has not yet been developed. The results are to make an omnidirectional improvement of PSCs. Among all zwitterions, 4-(4-(4-(di-(4-methoxylphenyl)amino)phenyl)propane-1-ium-1-yl)butane-1-sulfonate (OMeZC3) optimizes the balance hole/electron mobility ratio of perovskite to 0.91, and the corresponding PSCs demonstrate a high power conversion efficiency (PCE) of up to 23.15% free from hysteresis, standing out as one of the champion PSCs with an inverted structure. Importantly, the OMeZC3-modified PSC exhibits excellent long-term stability, maintaining almost its initial PCE after being stored at 80% relative humidity for 35 days.

Superiority of branched side chains in spontaneous nanowire formation: exemplified by poly(3-2-methylbutylthiophene) for high-performance solar cells.

One-dimensional nanostructures containing heterojunctions by conjugated polymers, such as nanowires, are expected to greatly facilitate efficient charge transfer in bulk-heterojunction (BHJ) solar cells. Thus, a combined theoretical and experimental approach is pursued to explore spontaneous nanowire formation. A dissipative particle dynamics simulation is first performed to study the morphologies formed by rodlike polymers with various side-chain structures. The results surprisingly predict that conjugated polymers with branched side chains are well suited to form thermodynamically stable nanowires. Proof of this concept is provided via the design and synthesis of a branched polymer of regioregular poly(3-2-methylbutylthiophene) (P3MBT), which successfully demonstrates highly dense nanowire formation free from any stringent conditions and stratagies. In BHJ solar cells fabricated using a blend of P3MBT and [6,6]-phenyl-C71-butyric acid methyl ester (PC(71) BM), P3MBT polymers are self-organized into highly crystalline nanowires with a d(100) spacing of 13.30 Å. The hole mobility of the P3MBT:PC(71) BM (1:0.5 by weight) blend film reaches 3.83 × 10(-4) cm(2) V(-1) s(-1) , and the maximum incident photon-to-current efficiency reaches 68%. The results unambiguously prove the spontaneous formation of nanowires using solution-processable conjugated polymers with branched alkyl side chains in BHJ solar cells.

Synergistic Engineering of Natural Carnitine Molecules Allowing for Efficient and Stable Inverted Perovskite Solar Cells.

Efficient control of the perovskite crystallization and passivation of the defects at the surface and grain boundaries of perovskite films have turned into the most important strategies to restrain charge recombination toward high-performance and long-term stability of perovskite solar cells (PSCs). In this paper, we employed a small amount of natural vitamin B (carnitine) with dual functional groups in the MAPbI3 precursor solution to simultaneously passivate the positive- and negative-charged ionic defects, which would be beneficial for charge transport in the PSCs. In addition, such methodology can efficiently ameliorate crystallinity with texture, better film morphology, high surface coverage, and longer charge carrier lifetime, as well as induce preferable energy level alignment. Benefiting from these advantages, the power conversion efficiency of PSCs significantly increases from 16.43 to 20.12% along with not only a higher open-circuit voltage of 1.12 V but also an outstanding fill factor of 82.78%.

Non-woven and aligned electrospun multicomponent luminescent polymer nanofibers: effects of aggregated morphology on the photophysical properties.

In this paper, the morphology and photophysical properties of non-woven and aligned ES nanofibers prepared from the ternary blends of poly(9,9-dioctylfluorenyl-2,7-diyl) (PFO) / poly(2,3-dibutoxy-1,4-phenylene vinylene) (DB-PPV) / poly(methyl methacrylate) (PMMA) using a single-capillary spinneret are reported. Various PFO and DB-PPV phase-separated structures in the ES nanofibers were found by two different solvents: ellipsoidal DB-PPV (10-40 nm) and fiber-like PFO (20-40 nm) in the PMMA using chloroform, while fiber-like DB-PPV (10-20 nm) and fiber-like PFO (20-30 nm) using chlorobenzene. Such different PFO and DB-PPV structures resulted in various energy transfer/emission colors in the ES nanofibers. Moreover, highly aligned luminescence PFO/DB-PPV/PMMA blend ES nanofibers prepared from chlorobenzene showed a much higher polarized emission than the non-woven and the emission colors changed from blue to greenish-blue to green as the DB-PPV composition increased. The different polarized emission characteristics between PFO and DB-PPV in the ES nanofibers also led to varied emission colors at different angles. The present study suggests the morphologies and emission characteristics of the multicomponent ES nanofibers could be efficiently tuned through solvent types and blend ratios of semiconducting polymers.

Design of New n-Type Porphyrin Acceptors with Subtle Side-Chain Engineering for Efficient Nonfullerene Solar Cells with Low Energy Loss and Optoelectronic Response Covering the Near-Infrared Region.

A series of tailor-made highly efficient and near-infrared (NIR) porphyrin-based acceptors is designed and synthesized for fullerene-free bulk-heterojunction (BHJ) organic solar cells. Constructing BHJ active layers using a PTB7-Th donor and porphyrin acceptors (P-x), which have complementary absorption, accomplishes panchromatic photon-to-current conversion from 300 to 950 nm. Our study shows that side chains of the porphyrin acceptors fairly influence the molecular ordering and nanomorphology of the BHJ active layers. Significantly, the porphyrin acceptor with four dodecoxyl side chains (P-2) achieves an open-circuit voltage (VOC) of 0.80 V, short-circuit current density (JSC) of 13.94 mA cm-2, fill factor of 64.8%, and overall power conversion efficiency of 7.23%. This great performance is attributable to the ascendant light-harvesting capability in the visible and near-infrared region, a high-lying LUMO energy level, a relatively high and more balanced carrier mobilities, and more ordered face-on molecular packing, which is beneficial for obtaining high VOC and JSC.

S,N-Heteroacene-Based Copolymers for Highly Efficient Organic Field Effect Transistors and Organic Solar Cells: Critical Impact of Aromatic Subunits in the Ladder π-System.

Three novel donor-acceptor alternating polymers containing ladder-type pentacyclic heteroacenes (PBo, PBi, and PT) are synthesized, characterized, and further applied to organic field effect transistors (OFETs) and polymer solar cells. Significant aspects of quinoidal characters, electrochemical properties, optical absorption, frontier orbitals, backbone coplanarity, molecular orientation, charge carrier mobilities, morphology discrepancies, and the corresponding device performances are notably different with various heteroarenes. PT exhibits a stronger quinoidal mesomeric structure, linear and coplanar conformation, smooth surface morphology, and better bimodal crystalline structures, which is beneficial to extend the π-conjugation and promotes charge transport via 3-D transport pathways and in consequence improves overall device performances. Organic photovoltaics based on the PT polymer achieve a power conversion efficiency of 6.04% along with a high short-circuit current density (JSC) of 14.68 mA cm-2, and a high hole mobility of 0.1 cm2 V-1 s-1 is fulfilled in an OFET, which is superior to those of its counterparts, PBi and PBo.

A new and facile method to prepare uniform hollow MnO/functionalized mSiO2 core/shell nanocomposites.

Trifunctional uniform nanoparticles comprising a manganese nanocrystal core and a functionalized mesoporous silica shell (MnO@mSiO(2)(Ir)@PEG, where Ir is an emissive iridium complex and PEG is polyethylene glycol) have been strategically designed and synthesized. The T(1) signal can be optimized by forming hollow core (H-MnO@mSiO(2)(Ir)@PEG) via a novel and facile etching process, for which the mechanism has been discussed in detail. Systematic investigation on correlation for longitudinal relaxation (T(1)) versus core shapes and shell silica porosity of the nanocomposites (MnO, H-MnO, MnO@SiO(2), MnO@mSiO(2), H-MnO@mSiO(2)) has been carried out. The results show that the worm-like nanochannels in the mesoporous silica shell not only increase water permeability to the interior hollow manganese oxide core for T(1) signal but also enhance photodynamic therapy (PDT) efficacy by enabling the free diffusion of oxygen. Notably, the H-MnO@mSiO(2)(Ir)@PEG nanocomposite with promising r(1) relaxivity demonstrates its versatility, in which the magnetic core provides the capability for magnetic resonance imaging, while the simultaneous red phosphorescence and singlet oxygen generation from the Ir complex are capable of providing optical imaging and inducing apoptosis, respectively.

Enhanced performance and air stability of 3.2% hybrid solar cells: how the functional polymer and CdTe nanostructure boost the solar cell efficiency.

A record high PCE of up to 3.2% demonstrates that the efficiency of hybrid solar cells (HSCs) can be boosted by utilizing a unique mono-aniline end group of PSBTBT-NH(2) as a strong anchor to attach to CdTe nanocrystal surfaces and by simultaneously exploiting benzene-1,3-dithiol solvent-vapor annealing to improve the charge separation at the donor/acceptor interface, which leads to efficient charge transportation in the HSCs.

Organic dyes with remarkably high absorptivity; all solid-state dye sensitized solar cell and role of fluorine substitution.

A series of new organic D-pi-A dyes, A1, A2-H and A2-F, possessing a remarkably high absorption extinction coefficient of epsilon > 5.0 x 10(4) M(-1) cm(-1) at peak wavelength were synthesized, among which, A2-F having a key fluorine substitution attains excellent all solid-state DSSC performance, with optimized parameters of eta = 4.86%, J(SC) = 7.52 mA cm(-2), V(OC) = 0.91 V, and FF = 0.71.

Design and synthesis of trithiophene-bound excited-state intramolecular proton transfer dye: enhancement on the performance of bulk heterojunction solar cells.

In an aim to harvest UV-near-visible (360-440 nm) photons as well as to increase the morphology in the bulk heterojunction solar cells, we report herein the strategic design, synthesis, and characterization of a novel excited-state intramolecular proton-transfer dye, 3-hydroxy-2-(5-(5-(5-(3-hydroxy-4-oxo-4H-chromen-2-yl)thiophen-2-yl)thiophen-2-yl)thiophen-2-yl)-4H-chromen-4-one (FT), which bears two key functional groups, namely 3-hydroxychromone chromophore and trithiophene backbone and is then exploited into the blends of regioregular poly(3-hexylthiophene) (RR-P3HT) and phenyl-C(61)-butyric acid methyl ester (PCBM). FT acts as an excellent UV-near visible absorber, which then undergoes excited-state intramolecular proton transfer, giving rise to an orange-red proton-transfer emission that was reabsorbed by P3HT via a Forster type of energy transfer. Introduction of FT to P3HT/PCBM blend films also improves the morphology of phase separated structure, in particular, enhances the interaction of P3HT chains and the hole mobility. In this work, under the optimized condition of P3HT: PCBM:FT of 15:9:2 in weight ratio, the best performance of the device B-FT2 revealed consistent enhancements in the efficiency (eta) 4.28% and short-circuit current (J(sc)) 12.53 mAcm(-2), which are higher than that (3.68% and 10.28 mAcm(-2)) of the best performance of the control device B (P3HT:PCBM 15:9 in weight ratio) by 16 and 22%, respectively.