Investigation of the Structural Mechanism and Film Growth on Cytoprotective Type I Collagen-Based Nanocoating of Individual Cellular Surfaces.

Cell surface coating using the layer-by-layer assembly (LbL) method has many advantages for biomedical applications. Because the cell surface is a dynamic and highly complex structure, it is hypothesized that LbL multilayer films on cells have characteristics different from those observed in traditional film characterization results. Here, to demonstrate the mechanism of LbL-film formation on cells, LbL films are prepared on HeLa cells using collagen (Col) and hyaluronic acid (HA). The growth behavior of the film and the main driving forces inducing the formation of an LbL film on the cells are investigated. Col self-assembles via electrostatic and hydrophobic interactions; therefore, the Col-based film on the cells grows laterally rather than volumetrically. For the film construction conditions, the ionic density and chain conformation of the polymers change, resulting in mainly hydrophobic interactions. Additional interactions, such as hydrophobic interactions and biological recognition between the substrate and building blocks, also exist and tightly stabilize the films on the cells. The Col/HA film shows an even distribution on the cell surface as the extracellular matrix, and it activates proliferation and the cytoprotective signaling pathway under harsh conditions, resulting in the focal adhesion kinase signaling pathway and low lactate dehydrogenase release. Therefore, information for film construction on cells is beneficial to understand the effectiveness of an LbL film for cells.

Co-existing "spear-and-shield" air filter: Anchoring proteinaceous pathogen and self-sterilized nanocoating for combating viral pandemic.

Infectious pollutants bioaerosols can threaten human public health. In particular, the indoor environment provides a unique exposure situation to induce infection through airborne transmission like SARS-CoV-2. To prevent the infection from spreading, personal protective equipment or indoor air purification is necessary. However, it has been discovered that the conventional filter can become contaminated by pathogen-containing aerosols, meaning that advanced filtering and self-sterilization systems are required. Here, we fabricate a multilayered nanocoating around the fabric using laponite (LAP) with Cu2+ ions (LAP-Cu2+ nanocoating) two contradictory functions in one system: trapping proteinaceous pathogens and antibacterial effect. Due to the strong LAP-protein interaction, albumin and spike protein (S-protein) are trapped into the fabric when proteins are sprayed using a nebulizer. The protein-blocking performance of the nanocoated fabric is 9.55-fold higher than bare fabric. These trapping capacities are retained after rinsing and repeated adsorption cycles, showing reproducibility for air filtration. Even though the protein-binding occurred, the LAP-Cu2+ fabric indicates antibacterial effect. LAP-Cu2+ fabric has an equivalent air and water transmittance rate to that of bare fabric with a stability under physiological environment. Therefore, given its excellent "Spear-and-shield" functions, the proposed LAP-Cu2+ fabric shows great potential for use in filter and masks during the viral pandemic.

General and Facile Coating of Single Cells via Mild Reduction.

Cell surface modification has been extensively studied to enhance the efficacy of cell therapy. Still, general accessibility and versatility are remaining challenges to meet the increasing demand for cell-based therapy. Herein, we present a facile and universal cell surface modification method that involves mild reduction of disulfide bonds in cell membrane protein to thiol groups. The reduced cells are successfully coated with biomolecules, polymers, and nanoparticles for an assortment of applications, including rapid cell assembly, in vivo cell monitoring, and localized cell-based drug delivery. No adverse effect on cellular morphology, viability, proliferation, and metabolism is observed. Furthermore, simultaneous coating with polyethylene glycol and dexamethasone-loaded nanoparticles facilitates enhanced cellular activities in mice, overcoming immune rejection.

In Vitro Osteogenic Differentiation and Antibacterial Potentials of Chalcone Derivatives.

Chalcone derivatives have been investigated as therapeutic agents for the anticancer, antioxidant, and anti-inflammatory fields. In this study, we have synthesized four different types of chalcone derivatives and demonstrated in vitro bioactivities. We divided these derivatives into two groups of chalcones on the basis of similar substituents on the aromatic rings, and we tested cell viability and proliferation potentials, which indicated that the methoxy substituent on the A ring could enhance cytotoxicity and antiproliferation potential depending on the chalcone concentration. We also investigated osteogenic differentiation of C2C12 cells by ALP staining, the early marker for osteogenesis, which demonstrated that the chalcones could not only induce activity of BMP-2 but also inhibit the activity of noggin, a BMP antagonist. In addition, chalcone bearing hydroxyl groups at the 2-, 4-, and 6-position on the A ring inhibited treptococcus mutans growth, a major causative agent of dental caries. Therefore, we concluded that the chalcone derivatives synthesized in this research can be good candidates for therapeutic agents promoting bone differentiation, with an expectation of inhibiting S. mutans, in dentistry.

Multilayered Controlled Drug Release Silk Fibroin Nanofilm by Manipulating Secondary Structure.

Many studies of drug delivery nanoplatforms have explored drug loading affinity and controlled release. The nanoplatforms can be influenced by their inherent building blocks. Natural polypeptide silk fibroin (SF) is an excellent nanoplatform material because of its high biocompatibility and unique structural properties. SF secondary structures have different properties that can be changed by external stimuli. Thus, the characterization of SF-containing platforms is strongly affected by secondary structure transformations. Structural changes can occur spontaneously, which hinders the control of structural variation in aqueous conditions. Herein, we successfully prepared a controllable secondary structure composed of SF/heparin (HEP) layer-by-layer assembled nanofilms using simple solvents (glycerol and methanol). SF in the SF/HEP nanofilms takes up than 90%, which means configurations of SF have a strong effect on the character of the nanofilms. We investigated the degradation profiles of SF/HEP nanofilms depending on their ß-sheet contents and demonstrated an immediate correlation between the transformation of secondary structures inside the nanofilms and the degree of degradation of nanofilms. Finally, SF/HEP nanofilms were used as a delivery platform for incorporating the anticancer drug epirubicin (EPI). We could control the loading efficiency and release profile of EPI with various ß-sheet contents of the nanofilms.

Drug Loading and Release Behavior Depending on the Induced Porosity of Chitosan/Cellulose Multilayer Nanofilms.

The ability to control drug loading and release is the most important feature in the development of medical devices. In this research, we prepared a functional nanocoating technology to incorporate a drug-release layer onto a desired substrate. The multilayer films were prepared using chitosan (CHI) and carboxymethyl cellulose (CMC) polysaccharides by the layer-by-layer (LbL) method. By using chemical cross-linking to change the inner structure of the assembled multilayer, we could control the extent of drug loading and release. The cross-linked multilayer film had a porous structure and enhanced water wettability. Interestingly, more of the small-molecule drug was loaded into and released from the non-cross-linked multilayer film, whereas more of the macromolecular drug was loaded into and released from the cross-linked multilayer film. These results indicate that drug loading and release can be easily controlled according to the molecular weight of the desired drug by changing the structure of the film.

Microfluidic Organoid Cultures Derived from Pancreatic Cancer Biopsies for Personalized Testing of Chemotherapy and Immunotherapy.

Patient-derived cancer organoids (PDOs) hold considerable promise for personalizing therapy selection and improving patient outcomes. However, it is challenging to generate PDOs in sufficient numbers to test therapies in standard culture platforms. This challenge is particularly acute for pancreatic ductal adenocarcinoma (PDAC) where most patients are diagnosed at an advanced stage with non-resectable tumors and where patient tissue is in the form of needle biopsies. Here the development and characterization of microfluidic devices for testing therapies using a limited amount of tissue or PDOs available from PDAC biopsies is described. It is demonstrated that microfluidic PDOs are phenotypically and genotypically similar to the gold-standard Matrigel organoids with the advantages of 1) spheroid uniformity, 2) minimal cell number requirement, and 3) not relying on Matrigel. The utility of microfluidic PDOs is proven by testing PDO responses to several chemotherapies, including an inhibitor of glycogen synthase kinase (GSKI). In addition, microfluidic organoid cultures are used to test effectiveness of immunotherapy comprised of NK cells in combination with a novel biologic. In summary, our microfluidic device offers considerable benefits for personalizing oncology based on cancer biopsies and may, in the future, be developed into a companion diagnostic for chemotherapy or immunotherapy treatments.

Molecular Characterization and Therapeutic Opportunities in KRAS Wildtype Pancreatic Ductal Adenocarcinoma.

PURPOSE: To investigate the molecular characteristics of and potential for precision medicine in KRAS wildtype pancreatic ductal adenocarcinoma (PDAC). PATIENTS AND METHODS: We investigated 27 patients with KRASWT PDAC at our institution. Clinical data were obtained via chart review. Tumor specimens for each subject were interrogated for somatic single nucleotide variants, insertion and deletions, and copy number variants by DNA sequencing. Gene fusions were detected from RNA-seq. A patient-derived organoid (PDO) was developed from a patient with a MET translocation and expanded ex vivo to predict therapeutic sensitivity prior to enrollment in a phase 2 clinical trial. RESULTS: Transcriptomic analysis showed our cohort may be stratified by the relative gene expression of the KRAS signaling cascade. The PDO derived from our patient harboring a TFG-MET rearrangement was found to have in vitro sensitivity to the multi-tyrosine kinase inhibitor crizotinib. The patient was enrolled in the phase 2 SPARTA clinical trial and received monotherapy with vebrelitinib, a c-MET inhibitor, and achieved a partial and durable response. CONCLUSIONS: KRASWT PDAC is molecularly distinct from KRASMUT and enriched with potentially actionable genetic variants. In our study, transcriptomic profiling revealed that the KRAS signaling cascade may play a key role in KRASWT PDAC. Our report of a KRASWT PDAC patient with TFG-MET rearrangement who responded to a cMET inhibitor further supports the pursuit of precision oncology in this sub-population. Identification of targetable mutations, perhaps through approaches like RNA-seq, can help enable precision-driven approaches to select optimal treatment based on tumor characteristics.

Patient-Specific Microfluidic Cancer Spheroid Cultures for Testing Cancer Therapies.

The field of oncology increasingly focuses on strategies to predict effectiveness of a given therapy on a patient-by-patient basis. Such precision or personalized oncology has the potential of significantly extending patient survival time. Patient-derived organoids are seen as the main source of patient tumor tissue that may be used for therapy testing in personalized oncology. The gold standard approach for culturing cancer organoids is in standard multi-well plates coated with Matrigel. Despite their effectiveness, these standard organoid cultures have drawbacks, namely, requirement of a large starting cell population and polydispersity of cancer organoid sizes. The latter drawback makes it challenging to monitor and quantify changes in organoid size in response to therapy. Microfluidic devices with integrated arrays of microwells may be used to both decrease the amount of starting cellular material required to form organoids and to standardize organoid size to make therapy assessment easier. Herein, we describe methodology for making microfluidic device as well as for seeding patient-derived cancer cells, culturing organoids, and testing therapies using these devices.

Function of hepatocyte spheroids in bioactive microcapsules is enhanced by endogenous and exogenous hepatocyte growth factor.

The ability to maintain functional hepatocytes has important implications for bioartificial liver development, cell-based therapies, drug screening, and tissue engineering. Several approaches can be used to restore hepatocyte function in vitro, including coating a culture substrate with extracellular matrix (ECM), encapsulating cells within biomimetic gels (Collagen- or Matrigel-based), or co-cultivation with other cells. This paper describes the use of bioactive heparin-based core-shell microcapsules to form and cultivate hepatocyte spheroids. These microcapsules are comprised of an aqueous core that facilitates hepatocyte aggregation into spheroids and a heparin hydrogel shell that binds and releases growth factors. We demonstrate that bioactive microcapsules retain and release endogenous signals thus enhancing the function of encapsulated hepatocytes. We also demonstrate that hepatic function may be further enhanced by loading exogenous hepatocyte growth factor (HGF) into microcapsules and inhibiting transforming growth factor (TGF)-ß1 signaling. Overall, bioactive microcapsules described here represent a promising new strategy for the encapsulation and maintenance of primary hepatocytes and will be beneficial for liver tissue engineering, regenerative medicine, and drug testing applications.

A Nanocoating Co-Localizing Nitric Oxide and Growth Factor onto Individual Endothelial Cells Reveals Synergistic Effects on Angiogenesis.

The delivery of nitric oxide (NO)-an intrinsic cellular signaling molecule-is promising for disease treatment, in particular to vascular diseases, due to its endothelial-derived inherent nature. The limited diffusion distance of labile NO prompts researchers to develop various carriers and targeting methods for specific sites. In contrast to the apoptotic effect of NO, such as anticancer, delivering low NO concentration at the desired targeting area is still intricate in a physiological environment. In this study, the layer-by-layer assembled nanocoating is leveraged to develop a direct NO delivery platform to individual endothelial cells (ECs). NO can be localized to individual ECs via S-nitrosothiol-bound polyacrylic acid which is a polymer directly providing an endothelial-like constant level of NO. To increase angiogenic activation along with NO, VEGF is additionally applied to specific receptors on the cell surface. Notably, the survival and proliferation of ECs are significantly increased by a synergistic effect of NO and VEGF co-localized via nanocoating. Furthermore, the nanocoating remarkably promoted cell migration and tubule formation-prerequisites of angiogenesis. The proposed unique technology based on nanocoating demonstrates great potential for conferring desired angiogenic functions to individual ECs through efficient NO delivery.

Coating Bioactive Microcapsules with Tannic Acid Enhances the Phenotype of the Encapsulated Pluripotent Stem Cells.

Human pluripotent stem cells (hPSCs) may be differentiated into any adult cell type and therefore hold incredible promise for cell therapeutics and disease modeling. There is increasing interest in three-dimensional (3D) hPSC culture because of improved differentiation outcomes and potential for scale up. Our team has recently described bioactive heparin (Hep)-containing core-shell microcapsules that promote rapid aggregation of stem cells into spheroids and may also be loaded with growth factors for the local and sustained delivery to the encapsulated cells. In this study, we explored the possibility of further modulating bioactivity of microcapsules through the use of an ultrathin coating composed of tannic acid (TA). Deposition of the TA film onto model substrates functionalized with Hep and poly(ethylene glycol) was characterized by ellipsometry and atomic force microscopy. Furthermore, the presence of the TA coating was observed to increase the amount of basic fibroblast growth factor (bFGF) incorporation by up to twofold and to extend its release from 5 to 7 days. Most significantly, TA-microcapsules loaded with bFGF induced higher levels of pluripotency expression compared to uncoated microcapsules containing bFGF. Engineered microcapsules described here represent a new stem cell culture approach that enables 3D cultivation and relies on local delivery of inductive cues.

Bioactive hydrogel microcapsules for guiding stem cell fate decisions by release and reloading of growth factors.

Human pluripotent stem cells (hPSC) hold considerable promise as a source of adult cells for treatment of diseases ranging from diabetes to liver failure. Some of the challenges that limit the clinical/translational impact of hPSCs are high cost and difficulty in scaling-up of existing differentiation protocols. In this paper, we sought to address these challenges through the development of bioactive microcapsules. A co-axial flow focusing microfluidic device was used to encapsulate hPSCs in microcapsules comprised of an aqueous core and a hydrogel shell. Importantly, the shell contained heparin moieties for growth factor (GF) binding and release. The aqueous core enabled rapid aggregation of hPSCs into 3D spheroids while the bioactive hydrogel shell was used to load inductive cues driving pluripotency maintenance and endodermal differentiation. Specifically, we demonstrated that one-time, 1 h long loading of pluripotency signals, fibroblast growth factor (FGF)-2 and transforming growth factor (TGF)-ß1, into bioactive microcapsules was sufficient to induce and maintain pluripotency of hPSCs over the course of 5 days at levels similar to or better than a standard protocol with soluble GFs. Furthermore, stem cell-carrying microcapsules that previously contained pluripotency signals could be reloaded with an endodermal cue, Nodal, resulting in higher levels of endodermal markers compared to stem cells differentiated in a standard protocol. Overall, bioactive heparin-containing core-shell microcapsules decreased GF usage five-fold while improving stem cell phenotype and are well suited for 3D cultivation of hPSCs.

2D graphene oxide particles induce unwanted loss in pluripotency and trigger early differentiation in human pluripotent stem cells.

The potential health hazards of particulates, such as micro/nano-sized plastics and carbon materials have recently received extensive attention. However, their toxicological properties in association with stem cell differentiation is still relatively unexplored. In this study, we elucidated the cytotoxic effects of 2D graphene oxide (GO), in relation to differentiation of human induced pluripotent stem cells (hiPSCs). Supplementation of GO to hiPSCs demonstrated uptake of GO through the plasma membrane and intracellular accumulation was observed. Increasing the concentration of GO led to reduced viability and increased likelihood of hiPSC colony detachment. Moreover, treatment of GO resulted in significant loss in pluripotency markers, OCT-4 and NANOG. In particular, when hiPSCs were cultured with GO in cardiomyocyte induction medium, upregulation of cardiomyocyte marker, NKX2.5, along with observation of early triggering of differentiation were observed. Taken together, our results highlight the risk in the uptake and accumulation of GO on the stem cell development by unwanted loss in pluripotency and accelerated initiation of differentiation.

Structured nanofilms comprising Laponite® and bone extracellular matrix for osteogenic differentiation of skeletal progenitor cells.

Functionalized scaffolds hold promise for stem cell therapy by controlling stem cell fate and differentiation potential. Here, we have examined the potential of a 2-dimensional (2D) scaffold to stimulate bone regeneration. Solubilized extracellular matrix (ECM) from human bone tissue contains native extracellular cues for human skeletal cells that facilitate osteogenic differentiation. However, human bone ECM displays limited mechanical strength and degradation stability under physiological conditions, necessitating modification of the physical properties of ECM before it can be considered for tissue engineering applications. To increase the mechanical stability of ECM, we explored the potential of synthetic Laponite® (LAP) clay as a counter material to prepare a 2D scaffold using Layer-by-Layer (LbL) self-assembly. The LAP and ECM multilayer nanofilms (ECM/LAP film) were successfully generated through electrostatic and protein-clay interactions. Furthermore, to enhance the mechanical properties of the ECM/LAP film, application of a NaCl solution wash step, instead of deionized water following LAP deposition resulted in the generation of stable, multi-stacked LAP layers which displayed enhanced mechanical properties able to sustain human skeletal progenitor cell growth. The ECM/LAP films were not cytotoxic and, critically, showed enhanced osteogenic differentiation potential as a consequence of the synergistic effects of ECM and LAP. In summary, we demonstrate the fabrication of a novel ECM/LAP nanofilm layer material with potential application in hard tissue engineering.

In vitro toxicity from a physical perspective of polyethylene microplastics based on statistical curvature change analysis.

Microplastics which are gradually and randomly decompose into small fragment by exposure of physical and biological external stress are emerging as a significant threat to the all the environments. Here, we have demonstrated the in vitro toxicity of microplastics of two different shapes. To minimize the chemical effect, polyethylene (PE), was used. PE microplastics with two different shapes were prepared, high-density PE microbeads and irregularly ground low-density PE from bulk pellets. It is hypothesized that morphological characteristics and concentration of PE microplastics could affect cellular viability, immunity, and lysis. To quantify the randomness of the microplastic shape, the edge patterns of the generated PE microplastics were converted into numerical values and analyzed using a statistical method. A 10-fold difference in curvature value was observed between microbeads and ground microfragments. To correlate shape differences to toxicology, cells were exposed to PE microplastics on the demand of toxicology studies. We found that the higher concentration and rough structure were associated with the toxicity of plastics toward cells, pro-inflammatory cytokine release, and hemolysis, even though PE is buoyant onto medium. The PE microbeads did not exhibit severe cytotoxicity at any of the tested concentrations, but induced immune and hemolysis responses at high concentrations. When comparing the toxicity of different shapes of PE microplastics, we confirmed by statistical analysis that irregular-shape plastics with sharp edges and higher curvature differences may adversely affect cells, further having possibility to human toxicity in real environment.

In vitro chemical and physical toxicities of polystyrene microfragments in human-derived cells.

With the increase in plastic production, a variety of toxicological studies on microplastics have been conducted as microplastics can be accumulated in the human body and cause unknown disease. However, previous studies have mainly assessed the toxicity of sphere-type microbeads, which may differ from randomly-shaped microplastics in a real environment. Here, we conducted in vitro toxicology analysis for randomly-shaped microplastics based on the hypotheses that (1) physical cytotoxicity is affected by nano-/micro-size roughness in polystyrene (PS) microfragments and (2) chemical toxicity is caused by chemical reagents from microplastics. We confirmed that the PS microfragments increased the acute inflammation of immune cells 20 times than control, the production of reactive oxygen species, and cell death of fibroblasts and cancer cells by releasing chemical reagents. In addition, when the PS microfragments were in direct contact with fibroblasts and red blood cells, the physical stress caused by them resulted in lactose dehydrogenase and hemoglobin release, respectively, due to cell membrane damage and hemolysis. This phenomenon was amplified when the concentration and roughness of the microfragments increased. Moreover, we quantitatively analyzed roughness differences between microplastics, which revealed a strong relationship between the physical damage of cells and the roughness of microplastics.

Potential toxicity of polystyrene microplastic particles.

Environmental pollution arising from plastic waste is a major global concern. Plastic macroparticles, microparticles, and nanoparticles have the potential to affect marine ecosystems and human health. It is generally accepted that microplastic particles are not harmful or at best minimal to human health. However direct contact with microplastic particles may have possible adverse effect in cellular level. Primary polystyrene (PS) particles were the focus of this study, and we investigated the potential impacts of these microplastics on human health at the cellular level. We determined that PS particles were potential immune stimulants that induced cytokine and chemokine production in a size-dependent and concentration-dependent manner.

Studies on the Drug Loading and Release Profiles of Degradable Chitosan-Based Multilayer Films for Anticancer Treatment.

This study demonstrates the possibility of developing a rapidly degradable chitosan-based multilayer film for controlled drug release. The chitosan (CHI)-based multilayer nanofilms were prepared with three different types of anions, hyaluronic acid (HA), alginic acid (ALG) and tannic acid (TA). Taking advantage of the Layer-by-Layer (LBL) assembly, each multilayer film has different morphology, porosity and thickness depending on their ionic density, molecular structure and the polymer functionality of the building blocks. We loaded drug models such as doxorubicin hydrochloride (DOX), fluorescein isothiocyanate (FITC) and ovalbumin (Ova) into multilayer films and analyzed the drug loading and release profiles in phosphate-buffered saline (PBS) buffer with the same osmolarity and temperature as the human body. Despite the rapid degradation of the multilayer film in a high pH and salt solution, the drug release profile can be controlled by increasing the functional group density, which results in interaction with the drug. In particular, the abundant carboxylate groups in the CHI/HA film increased the loading amount of DOX and decreased rapid drug release. The TA interaction with DOX via electrostatic interaction, hydrogen bonding and hydrophobic interaction showed a sustained drug release profile. These results serve as principles for fabricating a tailored multilayer film for drug delivery application.