Patient-Specific Implant Customization for Treatment of Internal Orbital Fractures Using Office-Based Three-Dimensional Printing.

OBJECTIVE: Three-dimensional (3D) modeling technology aids the reconstructive surgeon in designing and tailoring individualized implants for the reconstruction of complex craniofacial fractures. Three-dimensional modeling and printing have traditionally been outsourced to commercial vendors but can now be incorporated into both private and academic craniomaxillofacial practices. The goal of this report is to present a low-cost, standardized office-based workflow for restoring bony orbital volume in traumatic orbital fractures. METHODS: Patients with internal orbital fractures requiring open repair were identified. After the virtual 3D models were created by iPlan 3.0 Cranial CMF software (Brainlab), the models were printed using an office-based 3D printer to shape and modify orbital plates to correctly fit the fracture defect. The accuracy of the anatomic reduction and the restored bony orbital volume measurements were determined using postoperative computed tomography images and iPlan software. RESULTS: Nine patients fulfilled the inclusion criteria: 8 patients had unilateral fractures and 1 patient had bilateral fractures. Average image processing and print time were 1.5 hours and 3 hours, respectively. The cost of the 3D printer was $2500 and the average material cost to print a single orbital model was $2. When compared with the uninjured side, the mean preoperative orbital volume increase and percent difference were 2.7 ± 1.3 mL and 10.9 ± 5.3%, respectively. Postoperative absolute volume and percent volume difference between the orbits were -0.2 ± 0.4 mL and -0.8 ± 1.7%, respectively. CONCLUSIONS: Office-based 3D printing can be routinely used in the repair of internal orbital fractures in an efficient and cost-effective manner to design the implant with satisfactory patient outcomes.

Orbital Injuries From Self-Inflicted Gunshots: Patterns, Management, and Visual Outcomes.

PURPOSE: Self-inflicted facial gunshots (SIGSWs) typically result in a spectrum of severe injuries to facial structures, including the orbit and globe. Roughly three-quarters of those who arrive to the hospital will survive their injuries, and recidivism is typically low. Therefore, effective management is paramount to preserve vision, and long-term quality of life. The objective of this study is to characterize the common injuries to the orbit, globe, and periocular structures following SIGSWs, their management, and their eventual visual and reconstructive outcomes. METHODS: Retrospective review of trauma registry records at a Level 1 trauma center for patients who presented alive following SIGSWs involving the globe and/or orbit from 2007 to 2016. RESULTS: Of the 47 patients who presented with SIGSWs to the orbit, 33 (70%) were discharged alive from the hospital. Management strategies for these patients fell into 3 groups, based on the involved structures: i) Open globe injuries (Type I: n = 12, 34%) ii) Orbital fractures with preserved globe and optic nerve (Type II: n = 15, 43%), and iii) Optic nerve injuries with preserved globe (Type III: n = 8, 23%). Compared with Type II and III injuries, patients who had Type I injuries were more likely to die prior to hospital discharge (46% vs. 20% vs. 12%, p = 0.04), undergo ophthalmologic intervention (73% vs. 6% vs. 11%, p = 0.01), and more surgery (6 vs. 3 vs. 0.5 mean surgeries, p < 0.001). Type II injuries most frequently underwent debridement and reconstruction of the bony orbit. Type III and Type I injuries were associated with worse initial and final visual acuity, with the majority (100% and 75%, respectively) having No Light Perception (NLP) on initial exam, and no visual recovery during the follow-up period (median follow up= 25 months). CONCLUSIONS: Management and visual outcomes of orbital injuries from SIGSWs is determined by whether the globe and optic nerve are preserved. Open globe injury by itself is associated with higher mortality and significant permanent vision loss.

Optimization of 18 F-syntheses using 19 F-reagents at tracer-level concentrations and liquid chromatography/tandem mass spectrometry analysis: Improved synthesis of [18 F]MDL100907.

Traditional radiosynthetic optimization faces the challenges of high radiation exposure, cost, and inability to perform serial reactions due to tracer decay. To accelerate tracer development, we have developed a strategy to simulate radioactive 18 F-syntheses by using tracer-level (nanomolar) non-radioactive 19 F-reagents and LC-MS/MS analysis. The methodology was validated with fallypride synthesis under tracer-level 19 F-conditions, which showed reproducible and comparable results with radiosynthesis, and proved the feasibility of this process. Using this approach, the synthesis of [18 F]MDL100907 was optimized under 19 F-conditions with greatly improved yield. The best conditions were successfully transferred to radiosynthesis. A radiochemical yield of 19% to 22% was achieved with the radiochemical purity >99% and the molar activity 38.8 to 53.6 GBq/ µmol (n = 3). The tracer-level 19 F-approach provides a high-throughput and cost-effective process to optimize radiosynthesis with reduced radiation exposure. This new method allows medicinal and synthetic chemists to optimize radiolabeling conditions without the need to use radioactivity.

Low-Dose Computed Tomographic Scans for Postoperative Evaluation of Craniomaxillofacial Fractures: A Pilot Clinical Study.

Computed tomographic scans are frequently obtained following craniomaxillofacial fracture reconstruction. The additive radiation from such scans is not trivial; cumulative radiation exposure poses stochastic health risks. In this article, the authors postulate that a low-dose computed tomography protocol provides adequate image quality for postoperative evaluation of reconstructed craniomaxillofacial fractures. This study included patients for whom a computed tomographic scan was indicated following craniomaxillofacial fracture repair at a Level I trauma center. Postoperative craniomaxillofacial computed tomography was performed using a low-dose protocol, rather than standard protocols. A craniomaxillofacial surgeon and a radiologist interpreted the images to determine whether they were of sufficient quality. It was decided a priori that any inadequate low-dose computed tomography would require repeated scanning using standard protocols. The primary endpoint was the need for repeated computed tomography. In addition, the clarity of clinically significant anatomical landmarks on the images was graded on a five-point Likert scale. Twenty patients were scanned postoperatively using the low-dose protocol. Mean radiation dose (total dose-length product) from the low-dose protocol was 71 mGy · cm versus 532 mGy · cm for the preoperative computed tomographic scans that were obtained using conventional protocols (p < 0.001). All 20 low-dose computed tomographic scans were determined to provide satisfactory image quality. No patients required repeated computed tomography secondary to poor image quality. Low-dose computed tomography received high image-quality scores. A low-dose computed tomography protocol that delivers approximately 7.5-fold less radiation than the standard protocols was found to be adequate for postoperative evaluation of craniomaxillofacial fractures. Larger prospective studies may be warranted. CLINICAL QUESTION/LEVEL OF EVIDENCE:: Therapeutic, IV.

Survival following Self-Inflicted Gunshots to the Face.

BACKGROUND: Self-inflicted gunshot wounds involving the face are highly morbid. However, there is a paucity of objective estimates of mortality. This study aims to provide prognostic guidance to clinicians that encounter this uncommon injury. METHODS: A retrospective review of patients presenting to R Adams Cowley Shock Trauma Center (a Level I trauma center) with self-inflicted gunshot wounds to the face from 2007 to 2016. Isolated gunshot wounds to the calvaria or neck were excluded. The data were analyzed to determine predictors of survival. RESULTS: Of the 69 patients that met inclusion criteria, 90 percent were male and 80 percent were Caucasian, with an age range of 21 to 85 years. The most frequently seen injury patterns showed submental (57 percent), intraoral (22 percent), and temporal (12 percent) entry sites. Fewer than half (41 percent) of the cohort sustained penetrative brain injury. Overall, there were 18 deaths (overall mortality, 26 percent), 17 of which were secondary to brain injury. Independent predictors of death included penetrative brain injury (OR, 17; p < 0.0001) and age. Mortality was 17 percent among patients younger than 65 years, compared with 73 percent for those aged 65 years or older (p = 0.0001). Gastrostomy placement was independently associated with 25 percent reduction in length of hospitalization (p = 0.0003). CONCLUSIONS: Despite tremendous morbidity, the overwhelming majority of patients who present with facial self-inflicted gunshot wounds will survive, especially if they are young and have no penetrative brain injury. These findings should help guide clinical decisions for this devastating injury. CLINICAL QUESTION/LEVEL OF EVIDENCE: Risk, III.