Comparison of knee extensor strength after anterior cruciate ligament reconstruction using either quadriceps tendon or hamstring tendon autografts.

PURPOSE: The aim was to assess the consequences of quadriceps tendon (QT) harvest on knee extensor strength after anterior cruciate ligament reconstruction (ACL-R) compared to hamstring tendon (HT) autograft. Secondary objectives were to evaluate flexor strength recovery and search for correlation between strength status and functional outcome. METHODS: This a retrospective cohort of 44 patients who underwent ACL-R using either QT (25) or HT (19). Median age was 31.1 years. We assessed thigh muscle strength thanks to concentric iso kinetic evaluation (peak torque) at 60°.s-1, 180°.s-1, 240°.s-1 and eccentric at 30°.s-1, 7 months on average after surgery. Muscle strength values were compared to the uninjured leg in order to calculate a percentage of deficit as well as unilateral hamstring/quadriceps (H/Q) ratios. KOOS score was obtained at a mean follow-up of 18 months. RESULTS: Extensor strength deficit (concentric 60°.s-1) was one average 33.1% in the QT group and 28.2% in the HT group (p = 0.42). Difference of flexor strength deficit (concentric 60°.s-1) was close to be significant with 5% and 12% of deficit in the QT and HT group, respectively (p = 0.1), and statistically significant for high angular velocity (14% versus 3% at 240°.s-1, p = 0.04). H/Q ratios were comparable in both groups ranging from 0.62 to 0.78. Quadriceps muscle strength deficit was negatively correlated with the KOOS score (Pearson coefficient = -0.4; p = 0.005). CONCLUSION: QT autograft harvest does not yield significant quadriceps muscle weakness after ACL-R, which appear to be a pejorative factor for functional outcome. LEVEL OF EVIDENCE: IV, Retrospective study.

Subtalar arthrodesis using a single compression screw: a comparison of results between anterograde and retrograde screwing.

INTRODUCTION: The primary objective of this study was to compare the radiological and clinical results of anterograde and retrograde screwing in subtalar arthrodesis using a single compression screw. The secondary objective was to evaluate the subjective results and consolidation of this procedure. The hypotheses were that isolated screw fixation was sufficient to achieve good consolidation and that there was no difference between the two techniques with a similar rate of bone fusion. METHODS: This is a monocentric, retrospective, radio-clinical study based on 99 patients (101 feet), 58 males and 41 females, with an average age of 64 years. The main aetiology was post-traumatic osteoarthritis, which represented 51% of cases. Two groups were formed: group A (52 feet) consisting of fixed arthrodesis with ascending (retrograde) screwing and group D (49 feet) consisting of fixed arthrodesis with descending (anterograde) screwing. The two groups were statistically comparable in terms of demographic data as well as aetiologies and comorbidities. Arthrodeses which were not fused at 6 months were reassessed at one year and in the event of any radio-clinical doubt regarding consolidation, an additional CT scan was prescribed. Average post-operative follow-up was 11 ± 5 years (2-27 years). RESULTS: Ninety-two arthrodeses (93%) were fused at one year and 9 were considered to be in non-union, 5 (9.8%) in group A, and 4 (8.3%) in group D. We recorded 30 complications, 22 of which were due to a conflict with the screw head, 18 (34.5%) in group A and 4 (8.3%) in group D (p = 0.03). Conflict between the screw head and the heel led to the removal of the screw after consolidation of the arthrodesis. The clinical results were evaluated using Odom's criteria. Nine per cent of patients described their results as excellent, 29% as good, 51% as satisfactory and 11% found the result to be poor. CONCLUSION: The fusion rate for isolated compression screw arthrodesis is good, and there is no difference between anterograde and retrograde screws. However, the discomfort caused by the screw head being insufficiently embedded in the retrograde group led to a non-negligible number of additional surgeries to remove the screw.

Are Schatzker and AO classifications accurate enough to classify tibial plateau fractures in alpine skiers?

PURPOSE: The aims of this study were (1) to collect prospectively all tibial plateau fractures admitted to our department, over two ski seasons, and to classify them according to the Schatzker and AO classifications; (2) to assess if these classifications are accurate enough to include all types of fractures; and (3) to compare theses fractures with the series found in the literature, which included very few or no skiing accidents. METHODS: During the 2016-2017 and 2017-2018 ski seasons, we prospectively included 116 tibial plateau fractures caused by downhill skiing accidents. All patients underwent standard X-rays and 2D and 3D CT scans. The fractures were classified according to the AO and Schatzker revisited classifications. RESULTS: The full series consisted of 56 males (48%) and 60 females (52%), aged 49 ± 16 years (18-77). There were 60 type B (52%) and 56 type C fractures (48%) for AO classification and 45.5% types I, II and III and 54.5% types IV, V and VI for Schatzker classification. Thirty-five frontal fractures (30%) were not differentiated under the AO classification and, likewise, associated tibial spine fractures (28.5%) were not differentiated in the Schatzker classification. We were also unable to classify anterior tibial tuberosity fractures (14.5%) and fibula head fractures (8%). The anatomo-pathological types were not so different from road traffic accidents. CONCLUSION: Contrary to our hypothesis, the anatomical-pathological damage in tibial plateau fractures resulting from downhill skiing accidents was barely any different from those found in road traffic accidents. However, despite progress in classifications with the emergence of 3D CT scans, it is still not always possible to categorise all fractures within a given classification.

Effects of feeding a quebracho-chestnut tannin extract on lactating cow performance and nitrogen utilization efficiency.

The effects of feeding a quebracho-chestnut tannin extract mixture on performance and nitrogen (N) utilization were assessed with 36 multiparous lactating Holstein cows (mean ± standard deviation; 706 ± 59 kg of body weight; 126 ± 20 d in milk) randomly assigned to 3 dietary treatments in a randomized complete block design. Following a 2-wk covariate adjustment period, cows were fed their assigned treatment diets for 13 wk. Rice hulls were removed from a total mixed ration with a 54:46 forage:concentrate ratio (% of dry matter; DM), and a tannin extract mixture from quebracho and chestnut trees (2:1 ratio) was included at 0, 0.45, and 1.80% of dietary DM. There was no interaction between dietary treatments and experimental week for the reported measurements except milk lactose percentage. Overall, treatments did not affect milk yield (48.6 ± 7.8 kg/d), fat- and protein-corrected milk (46.1 ± 7.6 kg/d), milk fat content (3.88 ± 0.65%) and yield (1.85 ± 0.38 kg/d), and true protein yield (1.45 ± 0.21 kg/d). However, incremental levels of tannin extracts in the diet produced a linear increase in DM intake (29.2 to 30.9 kg/d) and a linear decrease in kilograms of milk per kilogram of DM intake (1.67 to 1.57 kg/kg) and MUN (12.2 to 10.8 mg/dL). Furthermore, there was a quadratic effect of tannin extracts on milk true protein content (2.96, 3.13, and 3.00% for 0, 0.45, and 1.80% tannin extract, respectively) and a tendency for linear and quadratic response for body weight gain (0.31, 0.16, and 0.44 kg/d for 0, 0.45, and 1.80% tannin, respectively). Intake of N increased linearly (782, 795, and 820 g/d) and N utilization efficiency (milk N/intake N) decreased linearly (0.300, 0.301, and 0.275 for 0, 0.45, and 1.80% tannin, respectively). Relative to the 0% diet, 1.80% tannin extract reduced estimated urinary N excretion by 11%. In this study, adding 0.45% tannin extract to the diet reduced feed efficiency but had a positive effect on milk protein content. Feeding a tannin extract mixture from quebracho and chestnut may reduce environmental labile urinary N excretion without affecting milk yield but at the expense of a lower feed utilization efficiency.

Posterior cruciate ligament reconstruction for chronic lesions: clinical experience with hamstring versus ligament advanced reinforcement system as graft.

PURPOSE: The aim of this study was to compare clinical and laximetric results in chronic, isolated posterior cruciate ligament (PCL) rupture repairs, using either a hamstring graft or an artificial ligament (ligament advanced reinforcement system (LARS®)). METHODS: Sixteen patients presenting with an isolated unilateral PCL rupture were included in this retrospective study. Initially, eight underwent a PCL reconstruction using a hamstring tendon autograft (hamstring group), and over a later period, eight further patients underwent a reconstruction using an artificial ligament with a new procedure. RESULTS: Fifteen patients were male and one female, with an average age of 29.3 years. All patients were operated on within an average time of 18 months post-injury. Pre-operative posterior laxity was equivalent (p = 0.309), 18.25 mm on average for the hamstring group and 18.75 mm for the LARS group. With an average follow-up of 24 months, residual posterior laxity was significantly improved, decreasing from 18.25 to 7.37 mm for the hamstring group (p < 0.05) with a median at 7.5 mm and from 18.75 to 5.25 mm for the LARS group (p < 0.05) with a median at 5 mm. The improvement in laxity for the hamstring group was 60% and 71.5% for the LARS group. The LARS group compares favourably (p = 0.003 and 0.01). Tegner activity level improved significantly following ligamentoplasty, with no difference between the two groups (p = 0.4). Likewise, there was no significant difference in the Lysholm and IKDC scores between the two groups (p = 0.4). CONCLUSION: The initial hypothesis of this study was proven correct. Nevertheless, a longer term study is necessary to assess the consequences of residual laxity in hamstring grafts and the long-term behaviour and tolerance of the LARS artificial ligament.

Independent clinical appraisal of the Tape Locking Screw (TLS®) anterior cruciate ligament reconstruction technique compared with the hamstring graft technique with a minimum of 12-month follow-up.

INTRODUCTION: The aim of this study was to assess the differential laxity after reconstruction of the anterior cruciate ligament (ACL) by the TLS® technique using a single tendon, the semitendinosus in four-strand graft, compared with the hamstring technique which uses both the gracilis and semitendinosus. We hypothesised that this surgical technique would provide post-surgical differential laxity measurements at least as good as those of the hamstring technique. MATERIALS AND METHODS: We carried out a prospective monocentric study on patients undergoing unilateral anterior cruciate ligament repair between December 2014 and June 2016. All patients were followed up for at least 12 months. The series compares 61 patients operated on using the TLS® technique by the same surgeon, with 33 patients operated on using the hamstring technique by a second surgeon. The main objective of the study was to compare the post-operative differential laxity, measured using the KT1000, between the two techniques. RESULTS: There was no significant difference in the patients' epidemiological characteristics and pre-operative scores between the two groups. Average pre-operative differential laxity was 6.5 mm ± 2.1 (min 3; max 12) in the TLS group and 6.4 mm ± 2.0 (min 0; max 11) in the hamstring group, with no statistically significant difference. The average post-operative difference in laxity was - 0.1 mm ± 1.9 (min - 5; max 4) in the TLS group and 0.3 mm ± 2.0 (min - 7; max 5) in the hamstring group. Again, no significant difference was observed between groups. DISCUSSION: This study demonstrates a level of post-operative differential laxity control using TLS comparable with that of the ACL reconstruction technique using a hamstring graft with preserved tibial insertion. LEVEL OF EVIDENCE: II, prospective cohort study.

Role of computer-assisted surgery in osteotomies around the knee.

PURPOSE: The goal of this article is to present our experience on navigation for osteotomies around the knee and especially osteotomies for coronal deformities. The first computer-assisted osteotomy was performed in March 2001 and since that time more than 1000 osteotomies have been performed in our department. METHODS: All the osteotomies were performed with the Orthopilot® device (B-Braun-Aesculap, Tuttlingen, Germany). The main indication was for genu varum deformities but several cases were operated for genu valgum. The surgical procedure as well as the indications and the rationale for each osteotomy (high tibial osteotomy-HTO, double-level osteotomy-DLO, femoral osteotomy-FO) are addressed in the article. RESULTS: The results are focused on several papers published by the authors since more than 10 years. Regarding HTO for genu varum, the preoperative goal (HKA angle: 184° ± 2°) was reached in 96 % of cases and the difference was statistically significant compared to the non-navigated series (71 %: p < 0.05). Regarding DLO for genu varum, the preoperative goal was reached in 92.7 % for the HKA angle and in 88.1 % for the medial proximal tibial mechanical angle (MPTMA). Regarding genu valgum deformity, the preoperative goal was achieved in 86.2 % of cases for the HKA angle and 100 % of cases for the MPTMA. CONCLUSION: According to these results, one can say that, regardless the type of osteotomy, the procedure is reliable, reproducible and accurate. Since 15 years, all the osteotomies around the knee are navigated in our department. Provided that one uses a reproducible radiograph protocol, navigation allows to perform double-level osteotomies, both for genu varum and genu valgum, with optimal accuracy in order to avoid oblique joint line, which will be difficult to revise to TKA. LEVEL OF EVIDENCE: IV.

IL-1beta mediates MMP secretion and IL-1beta neosynthesis via upregulation of p22(phox) and NOX4 activity in human articular chondrocytes.

OBJECTIVES: Osteoarthritis (OA) is characterized by a progressive alteration of the biochemical properties of the articular cartilage. Inflammation plays a major role in OA, particularly through the cytokine Interleukine-1ß, promoting reactive oxygen species (ROS) generation and matrix metalloproteinases (MMP) synthesis by the chondrocytes, orchestrating matrix proteolysis. NADPH oxidases (NOX) are membrane enzymes dedicated to the production of ROS. Role of oxidative stress is well established in OA; however, contribution of NOX in this process is still poorly documented. In this study, we addressed the role of NOX in primary human articular chondrocytes (HAC) upon inflammatory conditions--namely IL-1ß and OA. DESIGN: HAC were collected from patients undergoing hip surgery. Chondrocytes were treated with IL-1ß and NOX inhibitors Diphenylene Iodonium, GKT136901, Tiron and Heme oxygenase-1 before MMP expression and NOX activity assessment. Finally, NOX4 expression was compared between OA and non OA parts of hip cartilage (n = 14). RESULTS: This study establishes for the first time in human that NOX4 is the main NOX isoform expressed in chondrocytes. We found a significant upregulation of NOX4 mRNA in OA chondrocytes. Expression of NOX4/p22(phox) as well as ROS production is enhanced by IL-1ß. On the other hand, the use of NOX4 inhibitors decreased IL-1ß-induced collagenase synthesis by chondrocytes. Moreover, our study support the existence of a redox dependant loop sustaining pro-catabolic pathways induced by IL-1ß. CONCLUSIONS: This study points out NOX4 as a new putative target in OA and suggests that NOX-targeted therapies could be of interest for the causal treatment of the pathology.

X-Point-Position-Dependent Intrinsic Toroidal Rotation in the Edge of the TCV Tokamak.

Edge intrinsic rotation was investigated in Ohmic L-mode discharges on the Tokamak à Configuration Variable, scanning the major radial position of the X point, R(X). Edge rotation decreased linearly with increasing R(X), vanishing or becoming countercurrent for an outboard X point, in agreement with theoretical expectations. The core rotation profile shifted fairly rigidly with the edge rotation, changing the central rotation speed by more than a factor of two. Core rotation reversals had little effect on the edge rotation velocity. Edge rotation was modestly more countercurrent in unfavorable than favorable ∇B shots.

A simple surgical treatment for acute traumatic sternoclavicular dislocation.

Sternoclavicular lesions may sometimes require surgery. Many techniques have been described and they appear to be very demanding. We describe a simple technique using two screws and a strong suture (Arthrex Inc. Naples. FL 34108 USA). Level of evidence; Level IV, Case Series, Treatment Study.

Characterization of extended-spectrum cephalosporin-resistant Salmonella enterica serovar Heidelberg isolated from food animals, retail meat, and humans in the United States 2009.

Salmonella enterica is one of the most common causes of foodborne illness in the United States. Although salmonellosis is usually self-limiting, severe infections typically require antimicrobial treatment, and ceftriaxone, an extended-spectrum cephalosporin (ESC), is commonly used in both adults and children. Surveillance conducted by the National Antimicrobial Resistance Monitoring System (NARMS) has shown a recent increase in ESC resistance among Salmonella Heidelberg isolated from food animals at slaughter, retail meat, and humans. ESC resistance among Salmonella in the United States is usually mediated by a plasmid-encoded bla(CMY) ß-lactamase. In 2009, we identified 47 ESC-resistant bla(CMY)-positive Heidelberg isolates from humans (n=18), food animals at slaughter (n=16), and retail meats (n=13) associated with a spike in the prevalence of this serovar. Almost 90% (26/29) of the animal and meat isolates were isolated from chicken carcasses or retail chicken meat. We screened NARMS isolates for the presence of bla(CMY), determined whether the gene was plasmid-encoded, examined pulsed-field gel electrophoresis patterns to assess the genetic diversities of the isolates, and categorized the bla(CMY) plasmids by plasmid incompatibility groups and plasmid multi-locus sequence typing (pMLST). All 47 bla(CMY) genes were found to be plasmid encoded. Incompatibility/replicon typing demonstrated that 41 were IncI1 plasmids, 40 of which only conferred bla(CMY)-associated resistance. Six were IncA/C plasmids that carried additional resistance genes. pMLST of the IncI1-bla(CMY) plasmids showed that 27 (65.8%) were sequence type (ST) 12, the most common ST among bla(CMY)-IncI1 plasmids from Heidelberg isolated from humans. Ten plasmids had a new ST profile, ST66, a type very similar to ST12. This work showed that the 2009 increase in ESC resistance among Salmonella Heidelberg was caused mainly by the dissemination of bla(CMY) on IncI1 and IncA/C plasmids in a variety of genetic backgrounds, and is likely not the result of clonal expansion.

RADCAM-A radiation camera system combining foil bolometers, AXUV diodes, and filtered soft x-ray diodes.

Measurements of radiated power are critical for characterizing and optimizing tokamak performance. The RADCAM system, comprising arrays of foil bolometers, Absolute eXtreme UltraViolet (AXUV), and filtered soft x-ray diodes, has been constructed to provide improved measurements of plasma radiation on "Tokamak a Configuration Variable" (TCV). An overview of the physical geometry, electronics, and design of the system is provided. The construction of the bolometer foils together with the improved sensitivity characteristics resulting from the inclusion of an anti-reflection carbon coating are presented. The large number of lines of sight in RADCAM are shown to significantly increase the spatial resolution over the legacy system. The system calibration procedure is detailed, and the mean system sensitivity is shown to vary by less than 5% over 1000 discharges. Additionally, the methodology for cross-calibration of the AXUV diodes with the bolometer foils is presented and applied to generate high temporal resolution measurements. The RADCAM radiation camera system is a compact, versatile system that is demonstrated to provide high resolution profiles of the radiated power in TCV.

Gas puff imaging on the TCV tokamak.

We present the design and operation of a suite of Gas Puff Imaging (GPI) diagnostic systems installed on the Tokamak à Configuration Variable (TCV) for the study of turbulence in the plasma edge and Scrape-Off-Layer (SOL). These systems provide the unique ability to simultaneously collect poloidal 2D images of plasma dynamics at the outboard midplane, around the X-point, in both the High-Field Side (HFS) and Low-Field Side (LFS) SOL, and in the divertor region. We describe and characterize an innovative control system for deuterium and helium gas injection, which is becoming the default standard for the other gas injections at TCV. Extensive pre-design studies and the different detection systems are presented, including an array of avalanche photodiodes and a high-speed CMOS camera. First results with spatial and time resolutions of up to ≈2 mm and 0.5 µs, respectively, are described, and future upgrades of the GPI diagnostics for TCV are discussed.

Implementation of high-resolution spectroscopy for ion (and electron) temperature measurements of the divertor plasma in the Tokamak à configuration variable.

High resolution spectroscopy on the Tokamak à Configuration Variable (TCV) divertor plasma provided Doppler broadening measurements to infer the ion and neutral temperature of injected helium gas. This paper presents the Divertor Spectroscopy System's (DSS) access to He II ion temperature measurements over a broad range, ≈0.5-15 eV, with an uncertainty of <10% for most of the studied plasma discharges. TCV's shaping flexibility was employed to validate these measurements against Thomson scattering across the DSS lines of sight. In detachment-related experiments, Ti(He II) ≃ Te, making this diagnostic a reliable thermometer along the divertor leg plasma over the wide range of magnetic equilibria and divertor configurations achievable in TCV. A detailed description of the diagnostic hardware, data analysis, and sources of uncertainty is presented.

Rotation reversal bifurcation and energy confinement saturation in tokamak Ohmic L-mode plasmas.

Direction reversals of intrinsic toroidal rotation have been observed in diverted Alcator C-Mod Ohmic L-mode plasmas following electron density ramps. For low density discharges, the core rotation is directed cocurrent, and reverses to countercurrent following an increase in the density above a certain threshold. Such reversals occur together with a decrease in density fluctuations with 2 cm(-1)≤k(θ)≤11 cm(-1) and frequencies above 70 kHz. There is a strong correlation between the reversal density and the density at which the Ohmic L-mode energy confinement changes from the linear to the saturated regime.

Development of an 11-channel multi wavelength imaging diagnostic for divertor plasmas in MAST Upgrade.

Divertor detachment and alternative divertor magnetic geometries are predicted to be promising approaches to handle the power exhaust of future fusion devices. In order to understand the detachment process caused by volumetric losses in alternative divertor magnetic geometries, a Multi-Wavelength Imaging (MWI) diagnostic has recently been designed and built for the Mega Amp Spherical Tokamak Upgrade. The MWI diagnostic will simultaneously capture 11 spectrally filtered images of the visible light emitted from divertor plasmas and provide crucial knowledge for the interpretation of observations and modeling efforts. This paper presents the optical design, mechanical design, hardware, and test results of an 11-channel MWI system with a field of view of 40°. The optical design shows better than 5 mm FWHM spatial resolution at the plasma on all 11 channels across the whole field of view. The spread of angle of incidence on the surface of each filter is also analyzed to inform the bandwidth specification of the interference filters. The results of the initial laboratory tests demonstrate that a spatial resolution of better than 5 mm FWHM is achieved for all 11 channels, meeting the specifications required for accurate tomography.

Real-time feedback control of the impurity emission front in tokamak divertor plasmas.

In magnetic confinement thermonuclear fusion the exhaust of heat and particles from the core remains a major challenge. Heat and particles leaving the core are transported via open magnetic field lines to a region of the reactor wall, called the divertor. Unabated, the heat and particle fluxes may become intolerable and damage the divertor. Controlled 'plasma detachment', a regime characterized by both a large reduction in plasma pressure and temperature at the divertor target, is required to reduce fluxes onto the divertor. Here we report a systematic approach towards achieving this critical need through feedback control of impurity emission front locations and its experimental demonstration. Our approach comprises a combination of real-time plasma diagnostic utilization, dynamic characterization of the plasma in proximity to the divertor, and efficient, reliable offline feedback controller design.

Recent and historical pollution legacy in high altitude Lake Marboré (Central Pyrenees): A record of mining and smelting since pre-Roman times in the Iberian Peninsula.

We have analyzed potential harmful trace elements (PHTE; Pb, Hg, Zn, As and Cu) on sediment cores retrieved from lake Marboré (LM) (2612 m a.s.l, 42°41'N; 0° 2'E). PHTE variability allowed us to reconstruct the timing and magnitude of trace metal pollutants fluxes over the last 3000 years in the Central Pyrenees. A statistical treatment of the dataset (PCA) enabled us to discern the depositional processes of PHTE, that reach the lake via direct atmospheric deposition. Indeed, the location of LM above the atmospheric boundary layer makes this lake an exceptional site to record the long-range transport of atmospheric pollutants in the free troposphere. Air masses back-trajectories analyses enabled us to understand the transport pathways of atmospheric pollutants while lead isotopic analyses contributed to evaluate the source areas of metal pollution in SW Europe during the Late Holocene. PHTE variability, shows a clear agreement with the main exploitation phases of metal resources in Southern Europe during the Pre-Industrial Period. We observed an abrupt lead enrichment from 20 to 375 yrs CE mostly associated to silver and lead mining and smelting practices in Southern Iberia during the Roman Empire. This geochemical data suggests that regional atmospheric metal pollution during the Roman times rivalled the Industrial Period. PHTE also increased during the High and Late Middle Ages (10-15th centuries) associated to a reactivation of mining and metallurgy activities in high altitude Pyrenean mining sites during climate amelioration phases. Atmospheric mercury deposition in the Lake Marboré record mostly reflects global emissions, particularly from Almadén mines (central Spain) and slightly fluctuates during the last three millennia with a significant increase during the last five centuries. Our findings reveal a strong mining-related pollution legacy in alpine lakes and watersheds that needs to be considered in management plans for mountain ecosystems as global warming and human pressure effects may contribute to their future degradation.

"Snowflake" H mode in a tokamak plasma.

An edge-localized mode (ELM) H-mode regime, supported by electron cyclotron heating, has been successfully established in a "snowflake" (second-order null) divertor configuration for the first time in the TCV tokamak. This regime exhibits 2 to 3 times lower ELM frequency and 20%-30% increased normalized ELM energy (ΔWELM/Wp) compared to an identically shaped, conventional single-null diverted H mode. Enhanced stability of mid- to high-toroidal-mode-number ideal modes is consistent with the different snowflake ELM phenomenology. The capability of the snowflake to redistribute the edge power on the additional strike points has been confirmed experimentally.

Experimental evidence of momentum transport induced by an up-down asymmetric magnetic equilibrium in toroidal plasmas.

The first experimental evidence of parallel momentum transport generated by the up-down asymmetry of a toroidal plasma is reported. The experiments, conducted in the Tokamak à Configuration Variable, were motivated by the recent theoretical discovery of ion-scale turbulent momentum transport induced by an up-down asymmetry in the magnetic equilibrium. The toroidal rotation gradient is observed to depend on the asymmetry in the outer part of the plasma leading to a variation of the central rotation by a factor of 1.5-2. The direction of the effect and its magnitude are in agreement with theoretical predictions for the eight possible combinations of plasma asymmetry, current, and magnetic field.