Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Más filtros

Banco de datos
Tipo del documento
Asunto de la revista
Intervalo de año de publicación
1.
Anal Chem ; 79(13): 5040-50, 2007 Jul 01.
Artículo en Inglés | MEDLINE | ID: mdl-17542557

RESUMEN

Volatile organic compounds released from the biosphere are known to have a large impact on atmospheric chemistry. Field instruments for the detection of these trace gases are often limited by the lack of instrument portability and the inability to distinguish compounds of interest from background or other interfering compounds. We have developed an automated sampling and preconcentration system, coupled to a lightweight, low-power cylindrical ion trap mass spectrometer. The instrument was evaluated by measuring isoprene concentrations during a field campaign at the University of Michigan Biological Station PROPHET lab. Isoprene was preconcentrated by sampling directly into a short capillary column precooled without the aid of cryogens. The capillary column was then rapidly heated by moving the column to a preheated region to obtain fast separation of isoprene from other components, followed by detection with a cylindrical ion trap. This combination yielded a detection limit of approximately 80 ppt (parts per trillion) for isoprene with a measurement frequency of one sample every 11 min. The data obtained by the automated sampling and preconcentration system during the PROPHET 2005 campaign were compared to those of other field instruments measuring isoprene at this site in an intercomparison exercise. The intercomparisons suggest the new inlet system, when coupled with this ion trap detector, provides a viable field instrument for the fast, precise, and quantitative determination of isoprene and other trace gases over a variety of atmospheric conditions.


Asunto(s)
Contaminantes Atmosféricos/análisis , Automatización , Espectrometría de Masas/métodos , Compuestos Orgánicos/análisis , Butadienos/análisis , Hemiterpenos/análisis , Humedad , Espectrometría de Masas/instrumentación , Pentanos/análisis , Factores de Tiempo , Volatilización
2.
J Environ Monit ; 5(1): 75-83, 2003 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-12619759

RESUMEN

The Peroxy Radical Chemical Amplifier (PERCA) technique is a proven method for measurement of ambient levels of peroxy radicals at ground level, but there are no published instances of the technique being used on an aerial platform. Here we describe deployment of a PERCA on the former UK Meteorological Office C-130 Hercules research aircraft. The instrument uses the established method of chemical amplification and conversion of peroxy radicals to nitrogen dioxide (NO2) by doping the sample air-flow matrix with CO and NO, subsequently measuring the NO2 yield with an improved 'Luminox' LMA-3 NO2 detector. NO2 from the amplification chemistry is distinguished from other sources of NO2 reaching the detector by periodically injecting CO approximately 1 s downstream of the NO injection point (termination mode). Chain lengths (CL's) for the amplification chemistry were typically approximately 260 (ground level) to approximately 200 (7,000 m). This variation with altitude is less than the variation associated with the 'age' of the PFA inlet material where the amplification chemistry occurs; CL's of approximately 200 with old tubing to approximately 300 with new clean tubing were typical (ground level values). The CL determinations were made in-flight using an onboard calibration unit based on the 254 nm photolysis of 7.5 to 10 parts per billion (by volume, ppbv) of CH3I in air, producing CH3O2 in a quantitative manner. The noise-equivalent detection limit for peroxy radicals (HO2 + RO2) is 2 parts per trillion (by volume, pptv) at 3,650 m when the background ambient ozone levels are stable, based on a 5 min average of five 30 s amplification cycles and five 30 s termination cycles. This detection limit is a function of several factors but is most seriously degraded when there is large variability in the ambient ozone concentration. This paper describes the instrument design, considers its performance and proposes design improvements. It concludes that the performance of an airborne PERCA in the free troposphere can be superior to that of ground-based instruments when similar sampling frequencies are compared.


Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Radicales Libres/análisis , Oxígeno/química , Calibración
3.
Anal Chem ; 75(20): 5317-27, 2003 Oct 15.
Artículo en Inglés | MEDLINE | ID: mdl-14710808

RESUMEN

Laboratory characterizations of the peroxy radical chemical ionization mass spectrometer (PerCIMS) instrument have been performed. The instrument functions by drawing ambient air through a 50-microm-diameter orifice into an inlet held at low pressure. Peroxy radicals (HO2 and RO2) within this air are detected by amplified chemical conversion into a unique ion (HSO4-) via the chemistry initiated by the addition of NO and SO2 to the inlet. HSO4- ions are then quantified by a quadrupole filter mass spectrometer. PerCIMS provides measurements of the sum of peroxy radicals, HO2 + RO2 (HOxROx mode), or the HO2 component only (HO2 mode), achieved through the control of concentration of NO and SO2 added to the instrument. The characterization and response of this instrument have been evaluated through modeling of inlet chemistry and laboratory experiments and have also been demonstrated through successful deployment during field campaigns. The performance of PerCIMS with respect to calibration pressure and relative humidity is reported, as are the sensitivities of the instrument to organic peroxy radicals with different hydrocarbon groups. These data show PerCIMS to be a practical field instrument for the fast and accurate evaluation of the concentration of peroxy radicals over a variety of atmospheric conditions. The estimated accuracy of the derived [HOxROx] concentrations is +/- 35% (at the 95% confidence interval), while [HO2] measurements have accuracies of +/- 41% (at the 95% confidence interval). Typical precision of measurements well above the detection limit is 10%, and typical detection limits are 1 x 10(7) radicals cm(-3) for 15-s averaging times.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA