Survival of Four Conical Implant Abutment Connections After Removal of the Abutment Screw and Simulated Cyclic Loading: An In Vitro Comparative Study.

This in vitro study evaluated the mechanical behavior of different conical connection implant systems after abutment screw withdrawal. Four conical connection systems were selected based on different conical half-angles: Ankylos (5.7°), Cowell (7.0°), Straumann (7.5°), and Astra (11.0°). In each system, 5 implants and abutments were used (n = 5). According to the recommended value, each abutment screw was torqued to settle the abutment and then withdrawn through a predesigned hole of the cemented crown. The retentiveness of the abutment was evaluated by the following mechanical testing. All specimens were subjected to cyclic loading of 20-200 N, 30°, and 4-mm off-axis to the implant axis, for 106 cycles. The pullout forces and axial displacements of the abutments were measured. The data of the Cowell system was obtained from our previous work. All groups other than Astra group, in which abutment loosened after abutment screw withdrawal, passed the cyclic loading test. Straumann group demonstrated a significantly lower pullout force (27.4 ± 21.1 N) than Ankylos (160.1 ± 41.4 N) and Cowell (183.7 ± 30.5 N) groups. All groups showed abutment rebound after screw withdrawal except Straumann group. In addition, Ankylos, Cowell, and Straumann groups demonstrated axial displacement after cyclic loading. In terms of the retentiveness of the abutment after abutment screw withdrawal examined in this study, Ankylos and Cowell groups had much higher retentiveness than Straumann group, while Astra group had none. Conical angle could be a key design parameter to make abutment screw withdrawal after conical abutment settlement feasible, but more studies must be conducted for clinical application.

Complications following all-inside anterior cruciate ligament reconstruction.

PURPOSE: We conducted a comprehensive analysis of possible perioperative complications following all-inside anterior cruciate ligament reconstruction (ACLR). Additional techniques and tips are proposed to prevent and manage complications. METHODS: Complications following all-inside ACLR performed between December 2015 and December 2020 were retrospectively analysed. Altogether, 348 operations were performed and 275 patients were enrolled with a minimum 12-month follow-up period. Only semitendinosus autograft was utilised in most patients, and semitendinosus-gracilis autograft and allograft were used in five and 31 patients, respectively. Simultaneous meniscal repair, partial meniscectomy, and chondral surgery were performed in 29.5%, 21.1%, and 4.4% of patients, respectively. Complications were observed based on the patient's clinical condition, plain film, and magnetic resonance imaging. Clinical outcomes were assessed pre-operatively and at 12 months post-operatively, using the International Knee Documentation Committee form, Lysholm and Tegner activity scores, and KT1000 side-to-side difference. RESULTS: Intraoperative and post-operative complications developed in 65 patients (23.6%). The most common complication was cortical button malposition on the femoral side (19.3%). Intra-operative breakage of the retrograde drill was found in two cases (0.73%), with three cases (1.1%) of over-drilling with destruction of the outer cortex. Post-operatively, four (1.5%), 13 (4.7%), and 16 (5.8%) cases of infection, full-thickness re-rupture, and loss of extension, respectively, were recorded. Functional outcome scales showed significant post-operative improvement. CONCLUSION: Cortical button malposition was the most common but easily preventable complication. All-inside ACLR could be safe and promising after the suggested additional operative techniques and proper perioperative management which decrease complication rates and improve favourable outcomes.

Development of Injectable Calcium Sulfate and Self-Setting Calcium Phosphate Composite Bone Graft Materials for Minimally Invasive Surgery.

The demand of bone grafting is increasing as the population ages worldwide. Although bone graft materials have been extensively developed over the decades, only a few injectable bone grafts are clinically available and none of them can be extruded from 18G needles. To overcome the existing treatment limitations, the aim of this study is to develop ideal injectable implants from biomaterials for minimally invasive surgery. An injectable composite bone graft containing calcium sulfate hemihydrate, tetracalcium phosphate, and anhydrous calcium hydrogen phosphate (CSH/CaP paste) was prepared with different CSH/CaP ratios and different concentrations of additives. The setting time, injectability, mechanical properties, and biocompatibility were evaluated. The developed injectable CSH/CaP paste (CSH/CaP 1:1 supplemented with 6% citric acid and 2% HPMC) presented good handling properties, great biocompatibility, and adequate mechanical strength. Furthermore, the paste was demonstrated to be extruded from a syringe equipped with 18G needles and exerted a great potential for minimally invasive surgery. The developed injectable implants with tissue repairing potentials will provide an ideal therapeutic strategy for minimally invasive surgery to apply in the treatment of maxillofacial defects, certain indications in the spine, inferior turbinate for empty nose syndrome (ENS), or reconstructive rhinoplasty.

Calcaneal lengthening using ipsilateral fibula autograft in the treatment of symptomatic pes valgus in adolescents.

BACKGROUND: Evans calcaneal lengthening osteotomy is used to treat symptomatic flexible flatfoot when conservative treatment fails. Grafts such as autologous iliac bone grafts, allografts, and xenografts are implanted at the osteotomy site to lengthen the lateral column of the hindfoot. This study aimed to present the outcomes of an autologous mid-fibula bone graft used for calcaneal lengthening in symptomatic pes valgus in adolescents. METHODS: We retrospectively examined 23 ft of 13 adolescents who underwent surgery between July 2014 and January 2018. The radiological and clinical outcomes (American Orthopaedic Foot and Ankle Society ankle-hindfoot scale scores) were assessed during a mean follow-up of 49.7 (range, 30.9-73.4) months. The mean distance of the lengthening site was measured to evaluate graft sinking or collapse. The Goldberg scoring system was used to determine the degree of union at the donor and recipient sites. RESULTS: The calcaneal pitch and the anteroposterior and lateral talo-first metatarsal (Meary) angles showed significant correction, from 14.4 to 19.6 (p < 0.001), and from 14.5 to 4.6 (p < 0.001) and 13.5 to 8.5 (p < 0.001), respectively. The mean distance of the lengthening site showed no significant change (p = 0.203), suggesting no graft sinking or postoperative collapse. The lateral distal tibial angle showed no significant difference (p = 0.398), suggesting no postoperative ankle valgus changes. Healing of the recipient and donor sites occurred in 23 and 21 ft, respectively. The American Orthopaedic Foot and Ankle Society ankle-hindfoot scores improved significantly, from 68.0 to 98.5 (p < 0.001). CONCLUSIONS: Evans calcaneal lengthening using an ipsilateral mid-fibula bone autograft resulted in significant improvement in clinical and radiological outcomes without ankle valgus deformity. Hence, it could be a treatment option for lateral column calcaneal lengthening in adolescents.

Abutment screw withdrawal after conical abutment settlement: A pilot study.

OBJECTIVE: This study investigated the effects of abutment screw withdrawal after conical abutment settlement on the stability of the implant-abutment connection. MATERIALS AND METHODS: Twenty implants of a conical connection system were used. Two two-piece abutment designs were used: cone only (n = 10; NI) and cone plus octagonal index design (n = 10; I); for each design, five samples were used with (S) and without (NS) abutment screw withdrawal before a cyclic test. Finally, four groups, namely Gr S(NI), Gr S(I), Gr NS(NI), and Gr NS(I), were included. The cyclic test included cyclic loading of 20-200 N, 30°, and 4-mm off-axis to implant axis at 10 Hz for 106 cycles, simulating a clinical time interval of 40 months. The fatigue cycles were recorded. The axial displacement of the conical abutments during abutment settlement, screw withdrawal, and cyclic loading were measured. Abutment morphology was examined through scanning electron microscopy (SEM). RESULTS: Only Gr NS(NI) failed the test, indicating that without the index design and abutment screw withdrawal, and connection stability seriously deteriorated. Gr NS(I) exhibited significantly higher axial displacement into the implant after abutment settlement than did Gr NS(NI). It also exhibited continuous axial displacement into the implant after cyclic loading. SEM after cyclic testing in Gr NS(I) revealed marked burnishing on lateral edges of the index, indicating that the index design provides an antitorsional ability. CONCLUSION: Although this study has few limitations, abutment screw withdrawal is feasible in this conical implant-abutment connection system with index design.

Delayed-Onset Edematous Foreign Body Granulomas 40 Years After Augmentation Rhinoplasty by Silicone Implant Combined with Liquid Silicone Injection.

Despite the widespread application of augmentation rhinoplasty in Asia, reports on the interaction between alloplastic implants and injectable filler are scarce. This paper reports on a patient with delayed-onset edematous foreign body granuloma that had been caused by augmentation rhinoplasty performed using a silicone implant in conjunction with a liquid silicone injection 40 years earlier. This is the longest reported duration between initial rhinoplasty and the exacerbation of foreign body granuloma. This case report also presents intraoperative findings pertaining to the interlocking structures between silicone implants and injected liquid silicone. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Herbal Supplement in a Buffer for Dry Eye Syndrome Treatment.

Dry eye syndrome (DES) is one of the most common types of ocular diseases. There is a major need to treat DES in a simple yet efficient way. Artificial tears (AT) are the most commonly used agents for treating DES, but are not very effective. Herbal extractions of ferulic acid (FA), an anti-oxidant agent, and kaempferol (KM), an anti-inflammatory reagent, were added to buffer solution (BS) to replace ATs for DES treatment. The cytotoxicity and anti-inflammatory effects were examined in vitro by co-culture with human corneal epithelial cells (HCECs) to obtain the optimal concentration of KM and FA for treating HCECs. Physical properties of BS, such as pH value, osmolality, and refractive index were also examined. Then, rabbits with DES were used for therapeutic evaluation. Tear production, corneal damage, and ocular irritation in rabbits' eyes were examined. The non-toxic concentrations of KM and FA for HCEC cultivation over 3 days were 1 µM and 100 µM, respectively. Live/dead stain results also show non-toxicity of KM and FA for treating HCECs. Lipopolysaccharide-stimulated HCECs in inflammatory conditions treated with 100 µM FA and 1 µM KM (FA100/KM1) showed lower IL-1B, IL-6, IL-8, and TNFα expression when examined by real-time PCR. The BS with FA100/KM1 had neutral pH, and a similar osmolality and refractive index to human tears. Topical delivery of BS + FA100/KM1 showed no irritation to rabbit eyes. The corneal thickness in the BS + FA100/KM1 treated group was comparable to normal eyes. Results of DES rabbits treated with BS + FA100/KM1 showed less corneal epithelial damage and higher tear volume than the normal group. In conclusion, we showed that the combination of FA (100 µM) and KM (1 µM) towards treating inflamed HCECs had an anti-inflammatory effect, and it is effective in treating DES rabbits when BS is added in combination with these two herbal supplements and used as a topical eye drop.

Cranioplasty Using a Novel Osteoconductive Scaffold and Platelet Gel.

BACKGROUND: Commonly used materials for cranioplasty include autogenous bone grafts, methyl methacrylate, and titanium mesh. We evaluated a novel osteoconductive scaffold [N-isopropylacrylamide cross-linked with acrylic acid using γ-rays (ANa powder)] mixed with platelet gel for cranioplasty. METHODS: ANa powder mixed with platelet gel was implanted into a 15 × 15-mm, full-thickness calvarial bone defect in 5 New Zealand white rabbits. ANa powder mixed with phosphate-buffered saline was implanted in 5 rabbits. The calvarial bone defect was left unreconstructed in another 5 rabbits. Twelve weeks after surgery, computed tomography examination was used to evaluate the radiographic evidence of bone healing in vivo. Bone specimens were then retrieved for histologic study. RESULTS: The ANa scaffold mixed with platelet gel is biocompatible, biodegradable, and both osteoconductive and osteoinductive, leading to progressive growth of new bone into the calvarial bone defect. CONCLUSION: The use of this novel osteoconductive scaffold combined with osteoinductive platelet gel offers a valuable alternative for the reconstruction of calvarial bone defects.

Live and heat-killed Lactobacillus rhamnosus GG upregulate gene expression of pro-inflammatory cytokines in 5-fluorouracil-pretreated Caco-2 cells.

PURPOSE: This study investigates whether post-chemotherapeutic use of live and heat-killed Lactobacillus rhamnosus GG can modulate the expression of three pro-inflammatory cytokines in 5-fluorouracil (5-FU)-induced intestinal mucositis in vitro. METHODS: Live L. rhamnosus GG and heat-killed L. rhamnosus GG were observed using scanning electron microscopy. To establish the duration required for optimal expression of tumor necrosis factor-α (TNF-α), monocyte chemotactic protein-1 (MCP-1), and interleukin-12 (IL-12), 5 µM of 5-FU was selected to treat 10-day-old Caco-2 cells for 4, 6, 8, and 24 h. Caco-2 cells were treated with 5-FU (5 µM) for 4 h, followed by the administration of live L. rhamnosus GG (multiplicity of infection = 25), and heat-killed L. rhamnosus GG for 2 and 4 h. Finally, total cellular RNA was isolated to quantify mRNA expression of TNF-α, MCP-1, and IL-12 using real-time PCR. RESULTS: The results demonstrated that heat-killed L. rhamnosus GG remained structurally intact with elongation. A biphasic upregulated expression of TNF-α, MCP-1, and IL-12 was observed in 5-FU-treated Caco-2 cells at 4 and 24 h. Compared to non-L. rhamnosus GG controls in 5-FU-pretreated Caco-2 cells, a 2-h treatment of heat-killed L. rhamnosus GG significantly upregulated the MCP-1 expression (p < 0.05), and both live and heat-killed L. rhamnosus GG treatments lasting 4 h upregulated the TNF-α and MCP-1 expression (p < 0.05). Only live L. rhamnosus GG upregulated the IL-12 expression (p < 0.05). CONCLUSIONS: Post-chemotherapeutic use of live or heat-killed L. rhamnosus GG can upregulate the gene expression of 5-FU-induced pro-inflammatory cytokines in Caco-2 cells. Human intestinal epithelium may be vulnerable to the post-chemotherapeutic use of L. rhamnosus GG in 5-FU-induced mucositis that requires further in vivo studies for clarification.

Daptomycin-loaded polymethylmethacrylate bone cement for joint arthroplasty surgery.

Antibiotic-loaded acrylic bone cement has been frequently used as an infection prophylaxis or antibiotic-loaded spacer in infected arthroplasty. In addition, daptomycin has been used recently against broad spectrum Gram-positive organisms. The goal of this in vitro study is to investigate the bacteriacidal and mechanical properties of daptomycin-incorporated polymethylmethacrylate (PMMA) bone cement and evaluate its feasibility for clinical use. Daptomycin (0.5, 1, or 2 g) was premixed with 40 g of PMMA bone cement powder before curing. The mechanical properties of the daptomycin-loaded acrylic bone cement (DLABC) were estimated following standard guidance, and the release profile and kinetics of daptomycin from PMMA were analyzed. The antimicrobial efficacy of DLABC was determined with a zone of inhibition (ZOI) assay against Staphylococcus aureus, Staphylococcus epidermis, Enterococcus faecalis, and Enterococcus faecium, respectively. The results showed that the compressive strength, of PMMA bone cement, which was higher than 100 MPa in all groups, was sufficient according to ISO 5833 after incorporation of daptomycin. The encapsulated daptomycin was released for 2 weeks with a 9.59 ± 0.85%, 15.25 ± 0.69%, and 20.64 ± 20.33% released percentage on the first day in the low, mid, and high groups, respectively. According to the calculated release kinetics, incorporated daptomycin should be 3.3 times the original dose to double its release. Although all recipes of DLABC had a microbial inhibitory effect, the effect with a higher encapsulated amount of daptomycin was more significant. Therefore, we believe that daptomycin can be locally delivered from PMMA bone cement at the surgical site as a prophylactic or treatment for osteomyelitis against Gram-positive organisms with intact cement function.

Enhanced Vascular-like Network Formation of Encapsulated HUVECs and ADSCs Coculture in Growth Factors Conjugated GelMA Hydrogels.

Tissue engineering primarily aimed to alleviate the insufficiency of organ donations worldwide. Nonetheless, the survival of the engineered tissue is often compromised due to the complexity of the natural organ architectures, especially the vascular system inside the organ, which allows food-waste transfer. Thus, vascularization within the engineered tissue is of paramount importance. A critical aspect of this endeavor is the ability to replicate the intricacies of the extracellular matrix and promote the formation of functional vascular networks within engineered constructs. In this study, human adipose-derived stem cells (hADSCs) and human umbilical vein endothelial cells (HUVECs) were cocultured in different types of gelatin methacrylate (GelMA). In brief, pro-angiogenic signaling growth factors (GFs), vascular endothelial growth factor (VEGF165) and basic fibroblast growth factor (bFGF), were conjugated onto GelMA via an EDC/NHS coupling reaction. The GelMA hydrogels conjugated with VEGF165 (GelMA@VEGF165) and bFGF (GelMA@bFGF) showed marginal changes in the chemical and physical characteristics of the GelMA hydrogels. Moreover, the conjugation of these growth factors demonstrated improved cell viability and cell proliferation within the hydrogel construct. Additionally, vascular-like network formation was observed predominantly on GelMA@GrowthFactor (GelMA@GF) hydrogels, particularly on GelMA@bFGF. This study suggests that growth factor-conjugated GelMA hydrogels would be a promising biomaterial for 3D vascular tissue engineering.

The Edifice of Vasculature-On-Chips: A Focused Review on the Key Elements and Assembly of Angiogenesis Models.

The conception of vascularized organ-on-a-chip models provides researchers with the ability to supply controlled biological and physical cues that simulate the in vivo dynamic microphysiological environment of native blood vessels. The intention of this niche research area is to improve our understanding of the role of the vasculature in health or disease progression in vitro by allowing researchers to monitor angiogenic responses and cell-cell or cell-matrix interactions in real time. This review offers a comprehensive overview of the essential elements, including cells, biomaterials, microenvironmental factors, microfluidic chip design, and standard validation procedures that currently govern angiogenesis-on-a-chip assemblies. In addition, we emphasize the importance of incorporating a microvasculature component into organ-on-chip devices in critical biomedical research areas, such as tissue engineering, drug discovery, and disease modeling. Ultimately, advances in this area of research could provide innovative solutions and a personalized approach to ongoing medical challenges.

Effects of Chitosan on Chondrocytes Derived from Human Nasal Septal Cartilage.

BACKGROUND/AIM: The aim of this study was to evaluate the influence of chitosan on the growth of nasal septal chondrocytes (NSCs). The final goal was to establish a novel methodology to enhance nasal septal cartilage regeneration. MATERIALS AND METHODS: Human NSCs were isolated and their morphology was examined using Alcian blue staining and observed by light microscopy. The isolated NSCs were grown with various concentrations of chitosan and the expression of COL2A1 was investigated. RESULTS: NSCs were successfully isolated from nasal septal cartilage. Co-culture with 0.2% of chitosan greatly enhanced proliferation of NSCs compared to control cells. However, 0.5% of chitosan was harmful to NSCs, resulting in cell detachment from the culture plate. Furthermore, the addition of 0.2% chitosan significantly improved the expression of COL2A1 in NSCs. CONCLUSION: To our knowledge, this is the first report to demonstrate that chitosan could effectively guide the attachment and growth of human NSCs. Chitosan appears to be a promising additive for NSC culture, which sets the stage for studying tissue regeneration in nasal septal cartilage deficiency, rhinoplasty, and craniofacial reconstruction.

In vitro studies of factors affecting debridement of dental implants by tricalcium phosphate powder abrasive treatment.

Peri-implantitis is a common complication characterized by inflammation in tissues surrounding dental implants due to plaque accumulation, which can lead to implant failure. While air flow abrasive treatment has been found to be effective for debriding implant surfaces, little is known about the factors that affect its cleaning capacity. This study systematically examined the cleaning capacity of air powder abrasive (APA) treatment with ß-tricalcium phosphate (ß-TCP) powder, using various powder jetting strengths and different particle sizes. Three sizes of ß-TCP powder (S, M, and L) were prepared, and different powder settings (low, medium, and high) were tested. The cleaning capacity was determined by quantifying ink removal, which simulated biofilm removal from the implant surfaces at different time points. The results of the systematic comparisons showed that the most efficient cleaning of implant surfaces was achieved using size M particles with medium setting. Additionally, the amount of powder consumed was found to be critical to cleaning efficiency, and the implant surfaces were altered in all tested groups. These systematically analyzed outcomes may provide insights into the development of potential non-surgical strategies for treating peri-implant diseases.

Distinct Expression of Surface and Genetic Biomarkers in Prostate Cancer Cell Lines.

BACKGROUND/AIM: Surface biomarkers, such as CD44 and CD133, have been demonstrated to be expressed in prostate cancer cells, and our previous study has shown that prostate cancer cell lines could be divided into three groups according to the single and combined expression pattern of CD44 and 133. In order to refine prognostication in prostate cancer cells, we further investigated genetic biomarkers, prostate cancer antigen 3 (PCA3), kallikrein 4 (KLK4), and KLK9 in different prostate cancer cell lines. MATERIALS AND METHODS: CWR22Rv1, PC3, and DU145 cell lines were cultured until 95% confluence. The single expression of CD44 or CD133 and their combined expression were analyzed by flow cytometry, and gene expression of b-actin, PCA3, KLK4, and KLK9 was analyzed by real-time polymerase chain reaction. RESULTS: The single expression of CD133 was less than 4% in all cell lines examined. PC3 and DU145 cells displayed a high expression of CD44 (>91%), whereas CWR22Rv1 was the only cell line that demonstrated a high co-expression of both CD44 and CD133 (>91%). In addition, PC3 and DU145 displayed low expression of PCA3, KLK4, and KLK9 when compared with their own b-actin expression. In contrast, CWR22Rva showed high expression of PCA3 and KLK4 although KLK9 expression was also low. CONCLUSION: Both surface and genetic biomarkers should be validated for a more accurate prognosis in prostate cancer.

Unusual capitate fracture with dorsal shearing pattern and concomitant carpometacarpal dislocation with a 6-year follow-up: A case report.

BACKGROUND: Isolated capitate fractures are rare carpal fractures. Following high-energy injuries, capitate fractures are usually associated with other carpal fractures or ligament injuries. The management of capitate fractures depends on the fracture pattern. Here, we report an unusual capitate fracture with a dorsal shearing pattern and concomitant carpometacarpal dislocation, with a 6-year follow-up. To the best of our knowledge, this fracture pattern and surgical management have not been previously reported. CASE SUMMARY: A 28-year-old man presented with left-hand volar tenderness and decreased grip strength that persisted for one month after a traffic accident. Radiography showed a distal capitate fracture with carpometacarpal joint incongruence. Computed tomography (CT) revealed a distal capitate fracture with carpometacarpal joint dislocation. The distal fragment was rotated by 90° in the sagittal plane, and an oblique shearing fracture pattern was noted. Open reduction and internal fixation (ORIF) with a locking plate were performed using the dorsal approach. The imaging studies performed 3 mo and 6 years following surgery revealed a healed fracture, and the Disabilities of the Arm, Shoulder, and Hand and visual analog scale scores were significantly improved. CONCLUSION: CT can detect capitate fractures with dorsal shearing pattern and concomitant carpometacarpal dislocation. ORIF using a locking plate are possible.

Long-term effects of tear film component deposition on the surface and optical properties of two different orthokeratology lenses.

PURPOSE: To understand the effects of long-term deposition of tear film components on the surface and optical properties of orthokeratology (ortho-k) lenses, two different lenses, Brighten 22 and Optimum Extra, were tested here. METHODS: Ortho-k lenses were immersed in artificial tears and cleaned with a commercial care solution repeatedly for up to 90 days. Both the daily and accumulated lysozyme deposition amounts using an Enzyme-Linked ImmunoSorbent Assay were then analyzed. The base curve, central thickness, power, and transmission of visible light, ultraviolet A, and ultraviolet B were analyzed before and after repeated tear film component deposition procedures. The surface roughness using atomic force microscopy was observed and an energy dispersive spectrometer was used to analyze the composition of the deposits. RESULTS: The highest levels of lysozyme were adsorbed on both lens materials during the first four days of the procedure and became saturated by day 6. For both lens materials, contamination on the lenses was easily observed by day 30, and the degree of surface roughness was higher. The transmission levels of different light spectrums were reduced showing that the optical characteristics of both lenses were also affected. CONCLUSIONS: The results provide in vitro evidence that lysozyme could not be completely removed from orthokeratology lenses. Both surface and optical properties were affected by the deposition of tear film components. However, only one commercial multipurpose care solution was used to clean the lens in this study when the main ingredient was a surfactant, and the results might be different when other care regimens with other key ingredients are used. In addition, whether tear film component deposition might result in increased risks of infection or corneal abrasion will require further investigation.

Improving the Physical Properties of Starch-Based Powders for Potential Anti-Adhesion Applications.

Postoperative adhesion is one of the most common complications that occur during and after surgery; thus, materials that can prevent adhesion are often applied. Starch powders with a high water absorption capacity are preferred, and many studies have focused on increasing the water absorption of modified starches, as native starch powders display poor water-holding capacities. The effects of salts on the physical properties of acetylated distarch phosphate potato starch powders were investigated here. Changes in functional groups, the crystal structures of modified starch, particle morphologies, water absorption, viscosity, and in vivo adhesion were investigated. The results showed that salts greatly improved the water absorption and viscosity of acetylated distarch phosphate potato starch powders. Among the three different salt-modified starch powders, NaCl-modified starch powders displayed higher water absorption and viscosity and demonstrated better in vivo anti-adhesion performance. The results of this study propose a potential biomaterial that may function as an anti-adhesive, potentially leading to reduced surgical risks and a better quality of life for patients.

Lidocaine induces epithelial­mesenchymal transition and aggravates cancer behaviors in non­small cell lung cancer A549 cells.

The effects of clinically relevant concentrations of lidocaine on epithelial-mesenchymal transition (EMT) and associated lung cancer behaviors have rarely been investigated. The aim of the present study was to assess the impact of lidocaine on EMT and its related phenomena, including chemoresistance. Lung cancer cell lines (A549 and LLC.LG) were incubated with various concentrations of lidocaine, 5-fluorouracil (5-FU) or both to test their effects on cell viability. Subsequently, the effects of lidocaine on various cell behaviors were assessed in vitro and in vivo using Transwell migration, colony-formation and anoikis-resistant cell aggregation assays, and human tumor cell metastasis in a chorioallantoic membrane (CAM) model quantitated by PCR analysis. Prototypical EMT markers and their molecular switch were analyzed using western blotting. In addition, a conditioned metastasis pathway was generated through Ingenuity Pathway Analysis. Based on these measured proteins (slug, vimentin and E-cadherin), the molecules involved and the alteration of genes associated with metastasis were predicted. Of note, clinically relevant concentrations of lidocaine did not affect lung cancer cell viability or alter the effects of 5-FU on cell survival; however, at this dose range, lidocaine attenuated the 5-FU-induced inhibitory effect on cell migration and promoted EMT. The expression levels of vimentin and Slug were upregulated, whereas the expression of E-cadherin was downregulated. EMT-associated anoikis resistance was also induced by lidocaine administration. In addition, portions of the lower CAM with a dense distribution of blood vessels exhibited markedly increased Alu expression 24 h following the inoculation of lidocaine-treated A549 cells on the upper CAM. Thus, at clinically relevant concentrations, lidocaine has the potential to aggravate cancer behaviors in non-small cell lung cancer cells. The phenomena accompanying lidocaine-aggravated migration and metastasis included altered prototypical EMT markers, anoikis-resistant cell aggregation and attenuation of the 5-FU-induced inhibitory effect on cell migration.

Functional Peptide-Loaded Gelatin Nanoparticles as Eyedrops for Cornea Neovascularization Treatment.

Background: Corneal neovascularization (NV) is a process of abnormal vessel growth into the transparent cornea from the limbus and can disturb the light passing through the cornea, resulting in vision loss or even blindness. The use of nanomedicine as an effective therapeutic formulation in ophthalmology has led to higher drug bioavailability and a slow drug release rate. In this research, we designed and explored the feasibility of a new nanomedicine, gp91 ds-tat (gp91) peptide-encapsulated gelatin nanoparticles (GNP-gp91), for inhibiting corneal angiogenesis. Methods: GNP-gp91 were prepared by a two-step desolvation method. The characterization and cytocompatibility of GNP-gp91 were analyzed. The inhibition effect of GNP-gp91 on HUVEC cell migration and tube formation was observed by an inverted microscope. The drug retention test in mouse cornea was observed by in vivo imaging system, fluorescence microscope, and DAPI/TAMRA staining. Finally, the therapeutic efficacy and evaluation of neovascularization-related factors were conducted through the in vivo corneal NV mice model via topical delivery. Results: The prepared GNP-gp91 had a nano-scale diameter (550.6 nm) with positive charge (21.7 mV) slow-release behavior (25%, 240hr). In vitro test revealed that GNP-gp91 enhanced the inhibition of cell migration and tube formation capacity via higher internalization of HUVEC. Topical administration (eyedrops) of the GNP-gp91 significantly prolongs the retention time (46%, 20 min) in the mouse cornea. In chemically burned corneal neovascularization models, corneal vessel area with a significant reduction in GNP-gp91 group (7.89%) was revealed when compared with PBS (33.99%) and gp91 (19.67%) treated groups via every two days dosing. Moreover, GNP-gp91 significantly reduced the concentration of Nox2, VEGF and MMP9 in NV's cornea. Conclusion: The nanomedicine, GNP-gp91, was successfully synthesized for ophthalmological application. These data suggest that GNP-gp91 contained eyedrops that not only have a longer retention time on the cornea but also can treat mice corneal NV effectively delivered in a low dosing frequency, GNP-gp91 eyedrops provides an alternative strategy for clinical ocular disease treatment in the culture.