A novel homozygous PIGO mutation associated with severe infantile epileptic encephalopathy, profound developmental delay and psychomotor retardation: structural and 3D modelling investigations and genotype-phenotype correlation.

The PIGO gene encodes the GPI-ethanolamine phosphate transferase 3, which is crucial for the final synthetic step of the glycosylphosphatidylinositol-anchor serving to attach various proteins to their cell surface. These proteins are intrinsic for normal neuronal and embryonic development. In the current research work, a clinical investigation was conducted on a patient from a consanguineous family suffering from epileptic encephalopathy, characterized by severe seizures, developmental delay, hypotonia, ataxia and hyperphosphatasia. Molecular analysis was performed using Whole Exome Sequencing (WES). The molecular investigation revealed a novel homozygous variant c.1132C > T in the PIGO gene, in which a highly conserved Leucine was changed to a Phenylalanine (p.L378F). To investigate the impact of the non-synonymous mutation, a 3D structural model of the PIGO protein was generated using the AlphaFold protein structure database as a resource for template-based tertiary structure modeling. A structural analysis by applying some bioinformatic tools on both variants 378L and 378F models predicted the pathogenicity of the non-synonymous mutation and its potential functional and structural effects on PIGO protein. We also discussed the phenotypic and genotypic variability associated with the PIGO deficiency. To our best knowledge, this is the first report of a patient diagnosed with infantile epileptic encephalopathy showing a high elevation of serum alkaline phosphatase level. Our findings, therefore, widen the genotype and phenotype spectrum of GPI-anchor deficiencies and broaden the cohort of patients with PIGO associated epileptic encephalopathy with an elevated serum alkaline phosphatase level.

The response surface methodology for optimization of Halomonas sp. C2SS100 lipase immobilization onto CaCO3 for treatment of tuna wash processing wastewater.

An immobilized enzyme could exhibit selectively modified physicochemical properties, and it might offer a better environment for the enzyme activity. In this study, the immobilization yield of crude Halomonas sp. lipase was optimized to improve its stability. Thanks to its high adsorption capacity, CaCO3 has been chosen as support for the immobilization process. Furthermore, response surface methodology (RSM) was used to determine optimal conditions for the immobilization of the bacterial lipase. Five tested factors (enzyme solution, support amount, time, temperature, and acetone volume) were optimized applying a central composite design of RSM. The maximum yield of lipase immobilization was improved to 96%. Furthermore, a biochemical characterization proved a significant improvement of the immobilized lipase stability. The immobilized enzyme is more stable at extreme pH values and high temperatures than the free one. We also tested the reusability of the immobilized lipase by evaluating the recovery of the support using simple filtration. Thanks to its high stability, the immobilized lipase was invested in an effective treatment of tuna wash processing wastewater. The oil biodegradation efficiency was established at 81.5% and was confirmed by Fourier transformation infrared spectrometry. Likewise, the biological oxygen demand values were reduced which makes a possible reduction of the wastewater pollution degree.

Optimization using response surface methodology of phospholipase C production from Bacillus cereus suitable for soybean oil degumming.

This work deals with the optimization of an extracellular phospholipase C production by Bacillus cereus (PLCBc) using Response Surface Methodology (RMS) and Box-Behnken design. In fact, after optimization, a maximum phospholipase activity (51 U/ml) was obtained after 6 h of cultivation on tryptone (10 g/L), yeast extract (10 g/L), NaCl (8.125 g/L), pH 7.5 with initial OD (0.15). The PLCBc activity, esteemed by the model (51 U) was very approximate to activity gutted experimentally (50 U). The PLCBc can be considered as thermoactive phospholipase since it showed a maximal activity of 50 U/mL at 60 °C using egg yolk or egg phosphatidylcholine (PC) as substrate. In addition, the enzyme was active at pH 7 and is stable after incubation at 55 °C for 30 min. The application of B. cereus phospholipase C in soybean oil degumming was investigated. Our results showed that when using enzymatic degumming, the residual phosphorus decrease more than with water degumming, indeed, it passes from 718 ppm in soybean crude oil to 100 ppm and 52 ppm by degumming using water and enzymatic process, respectively. The diacylgycerol (DAG) yield showed an increase of 1.2% with enzymatic degumming compared to soybean crude oil. This makes our enzyme a potential candidate for food industrial applications such as enzymatic degumming of vegetable oils.

Expression and characterization of an organic solvent tolerant recombinant lipase from Staphylococcus capitis SH6 for food wastewater treatment.

The study illustrated here aims on an organic solvent tolerant lipase from Staphylococcus capitis (SCL). The gene part, encoding the mature lipase, was cloned and sequenced. The concluded polypeptide sequence, equivalent to the protein, consist of 388 amino acid residues with a molecular mass of about 45 kDa. A structure-based alignment of the SCL amino acid sequence shows high identities with those many staphylococcal lipases. From this alignment of sequences, the catalytic triad (Ser 117, Asp 308 and His 347) of SCL could be identified. The mature part of the SCL was expressed in Escherichia coli and the recombinant lipase (r-SCL) was purified to homogeneity. The purified r-SCL presented a quite interesting stability at low temperatures (< 30 °C) and the enzyme was found to be highly stable in polar organic solvent and at a pH ranging from 3 to 12. After that, we have demonstrated that the recombinant enzyme may be implicated in the biodegradability of oily wastewater from effluents of fast-food restaurants; the maximum conversion yield into fatty acids obtained at 30 °C, was 65%.

Fungal lipases as biocatalysts: A promising platform in several industrial biotechnology applications.

Many researchers have found fungi as a reliable source of lipase due to the versatility of their properties, ease of mass production, thermal stability, pH stability, broad substrate specificity, retained activity in organic solvents, and their low-cost extraction procedure. This review paper presents an overview about the main aspects of fungal lipases screened from several types of strains as well as their use as biocatalysts. Additionally, some biochemical properties will be reported. As commonly known, lipases can be produced from animals, plants, and microorganisms. Compared to other lipases, those obtained from fungi have been found to be more productive, a fact that encouraged the massive production of most fungal lipases due to their considerable commercial importance during the past few years. This paper is concerned about some of the major characteristics that made fungal lipases desirable products in the industrial fields. Due to the enantioselective properties of fungal lipases and their ability to remain active under extreme temperature, pH, and organic solvents, enzymes are capable to synthesize esters as well as to catalyze a variety of chemical reactions that include esterification, transesterification, acidolysis and aminolysis in aqueous and nonaqueous media. Furthermore, lipases are considered to have a commercial importance for biotechnological application fields, which makes them increasingly popular in food, detergent, cosmetic, organic synthesis, and pharmaceutical domains. The biotechnological potential of lipases has made the latter a coveted choice in industries for the present and future as biocatalysts. In addition, a classification of these fungal enzymes is also highlighted in this review. Moreover, the impact of an immobilization strategy of these fungal strains to achieve higher yields and to improve their production is discussed. Finally, fungal enzymes have played a crucial role from ancient times to today in different fields using several types of biological systems, which gives them a great interest for the production of these enzymes in large amounts with low cost and easy viability to enlarge their use in many industries. Likewise, some future perspectives on lipase production will also be discussed by focusing on special cases on lipase engineering.

Optimization of an organic solvent-tolerant lipase production by Staphylococcus capitis SH6. Immobilization for biodiesel production and biodegradation of waste greases.

Using the statistical approach, this work seeks to optimize the process parameters to boost the generation of an organic solvent-tolerant lipase by Staphylococcus capitis SH6. The main parameters influencing the enzyme production were identified by using Plackett-Burman's screening design. Among the test variables, only tryptone (25 g/L), malt extract (2.5 g/L), NaCl (10 g/L) and pH (7.0) contributed positively to enzyme production. Then, the crude lipase was immobilized by adsorption on CaCO3 at pH 10. A maximum immobilization efficiency of 82% was obtained by incubating 280 mg of enzyme with CaCO3 (1 g) during 30 min. The immobilized lipase was more stable toward organic solvents than the free enzyme. It retained about 90% of its original activity in the presence of ethanol and methanol. After that, the immobilized enzyme was used for biodiesel production by transesterification process between waste oil and methanol or ethanol during 24 h at 30 °C. Our results show that the lipase can be utilized efficiently in biodiesel industry. Likewise, we have demonstrated that the immobilized enzyme may be implicated in the biodegradability of waste grease; the maximum conversion yield into fatty acids obtained after 12 h at 30 °C, was 57%.

Measurement System for Lossy Capacitive Sensors: Application to Edible Oils Quality Assessment.

This paper aimed to develop a portable, low-cost, and easy-to-use measurement system for oil quality degradation assessment. The main two chemical parameters affected by frying are the total polar compounds (TPC) and free fatty acids. The system should characterize the change of chemical parameters by measuring the changes in its dielectric parameters. The dielectric parameters, relative permittivity, and conductivity are measured by measuring the capacitance and resistance of a capacitive sensor dipped in oil. The main challenges are that the corresponding changes of the capacitance and resistance are very small and the presence of stray effects. For this reason, the measurement system should be able to detect changes in capacitance and resistance with high resolution and with good immunity to stray effects. The proposed measurement system is based on the conversion of impedance to voltage and time and combining, therefore, having two measurement methods in one circuit. In this way, it is possible to measure the dielectric and resistive parameters and not only the relative permittivity as was done in previous works. The results showed a strong correlation between the chemical and electrical parameters with a coefficient of determination in the range of 0.9.

A newly thermoactive and detergent-stable lipase from annular sea bream (Diplodus annularis): Biochemical properties.

A lipolytic activity was located in the annular seabream pyloric caeca, from which a digestive lipase (AsDL) was purified. Pure AsDL has an apparent molecular mass of 50 kDa. The purified lipase is thermoactive as it displays its maximal activity on short- and long-chain triacylglycerols at a temperature of 50 °C. The enzyme is alkaline resistant as it retains 90% of its maximal activity when incubated during 1 H at pH 10. No colipase was detected in the annular seabream pyloric caeca. Similar results were reported for the sardine and the gray mullet digestive systems. This is in line with the idea that colipase might have evolved in mammal animals simultaneously with the appearance of an exocrine pancreas. AsDL is a serine enzyme, like all known lipases from different origins. Interestingly, the pure lipase was found to be insensitive to Triton X-100, a synthetic detergent, addition even at a concentration as high as 12 mM. The purified enzyme has potential applications in detergent and food industry because of its thermal activity and alkaline nature.

Biochemical and molecular characterization of a lipase from an Algerian isolated Staphylococcus aureus strain.

A Staphylococcus aureus strain, isolated from an Algerian biotope, secretes a non-induced lipase in the culture medium. The S. aureus lipase (SAL) was purified to homogeneity. Pure SAL is a monomeric protein (43 kDa). The 20 N-terminal amino acid residues showed a high degree of homology with other staphylococcal lipase sequences. SAL presents specific activities of about 1600 and 555 U mg-1 using tributyrin and olive oil emulsion as substrates, respectively. In contrast to other staphylococcal lipases previously characterized, SAL was stable at a pH range from 6 to 9 after 1 h incubation, and retained 50% of its activity after 10 min incubation at 50 °C. The purified enzyme was also characterized using monolayer technique. Lipase activity can be measured only when the surface pressure exceeds 15 mN m-1 . The critical surface pressure (πc ) measured with egg-PC films was estimated at 33 mN m-1 . SAL showed a preference for the distal ester groups of the diglyceride isomers at low surface pressure, for the adjacent ester groups at high surface pressure and a preference for the sn-3 position of the 2,3-sn-enantiomer of dicaprin. Cloned and sequenced gene part, encoding the mature lipase shows, in comparison with S. aureus lipase 3 (SAL3), a deletion of three residues (LKA) at the N-terminal extremity and a substitution of glycine 208 and isoleucine 226 with an arginine and leucine, respectively.

Optimization of newly isolated Bacillus cereus α-amylase production using orange peels and crab shells and application in wastewater treatment.

A newly isolated amylolytic strain was identified as Bacillus cereus spH1 based on 16S and 16-23S gene sequencing (Accession numbers OP811441.1 and OP819558, respectively), optimization strategies, using one variable at time (OVAT) and Plackett-Burman design, were employed to improve the alpha-amylase (α-amylase) production. Condition inferred revealed that the optimal physical parameters for maximum enzyme production were 30 °C, pH 7.5, and 12 h of incubation, using tryptone, malt extract, orange (Citrus sinensis) peels, crab (Portunus segnis) shells, calcium, and sodium chloride (NaCl) as culture medium. The full factorial design (FFD) model was observed to possess a predicted R2 and adjusted R2 values of 0.9788 and 0.9862, respectively, and it can effectively predict the response variables (p = 0). Following such efforts, α-amylase activity was increased 141.6-folds, ranging from 0.06 to 8.5 U/mL. The ideal temperature and pH for the crude enzyme activity were 65 °C and 7.5, respectively. The enzyme exhibited significant stability, with residual activity over 90% at 55 °C. The maltose was the only product generated during the starch hydrolysis. Moreover, the Bacillus cereus spH1 strain and its α-amylase were used in the treatment of effluents from the pasta industry. Germination index percentages of 143% and 139% were achieved when using the treated effluent with α-amylase and the strain, respectively. This work proposes the valorization of agro-industrial residues to improve enzyme production and to develop a green and sustainable approach that holds great promise for environmental and economic challenges.

Kinetic properties of a novel Fusarium solani (phospho)lipase: a monolayer study.

Using the monomolecular film technique, we studied interfacial properties of Fusarium solani lipase (FSL). This lipolytic enzyme was found to be unique among the fungal lipases possessing not only a lipase activity but also a high phospholipase one.The FSL was able to hydrolyze dicaprin films at various surface pressures. The surface pressure dependency, the stereospecificity, and the regioselectivity of FSL were performed using optically pure stereoisomers of diglyceride (1,2-sn- dicaprin and 2,3-sn-dicaprin) and a prochiral isomer (1,3-sn-dicaprin) spread as monomolecular films at the air-water interface. The FSL prefers adjacent ester groups of the diglyceride isomers (1,2-sn-dicaprin and 2,3-sn-dicaprin) at low and high surface pressures. Furthermore, FSL was found to be markedly stereospecific for the sn-1 position of the 1,2-sn-enantiomer of dicaprin at both low and high surface pressures.Moreover, FSL shows high activities on phospholipids monolayers. However, this enzyme displays high preference to zwitterionic phospholipids compared to the negatively charged ones.

Structure elucidation of Staphylococcus capitis lipase. Molecular dynamics simulations to investigate the effects of calcium and zinc ions on the structural stability.

Cold-adapted and organic solvent tolerant lipases have significant potential in a wide range of synthetic reactions in industry. But there are no sufficient studies on how these enzymes interacts with their substrates. Herein, the predicted structure and function of the Staphylococcus capitis lipase (SCL) are studied. Given the high amino acid sequence homology with the Staphylococcus simulans lipase (SSL), 3D structure models of closed and open forms of the S. capitis lipase were built using the structure of SSL as template. The models suggested the presence of a main lid and a second lid that may act with the former as a double door to control the access to the active site. The SCL models also allowed us to identify key residues involved in binding substrates, calcium or zinc ions. By following this model and utilizing molecular dynamics (MD) simulations, the stability of the S. capitis lipase at low temperatures could be explained in the presence and in the absence of calcium and zinc. Due to its thermolability, the SCL is extremely valuable for different biotechnological applications in a wide variety of industries from molecular biology to detergency to food and beverage preparation.Communicated by Ramaswamy H. Sarma.

Lipolytic activity levels and colipase presence in digestive glands of some marine animals.

Studies on the digestive secretions in aquatic animals can elucidate certain aspects of their nutritive physiology. The aim of the present study was to compare the digestive lipase and phospholipase activities in ten marine species belonging to four classes following the taxonomic classification of marine organisms. All aquatic digestive tissues tested are equipped with lipase and phospholipase activities, assuming the hydrolysis of fat-rich food. The lipolytic activities determined in the pancreases of cartilaginous fishes were greater than those in bony fishes, molluscs and crustaceans. This finding might be explained by the strong digestive utilization of fat-rich macronutrients by these carnivorous fishes. A trend of activities and stabilities at different pH and temperatures for crude lipases and phospholipases from these aquatic animals suggests that the optimum pH and temperature for marine lipases are species dependent. Interestingly, the sardine caecal lipase and phospholipase were found to be mostly stable in a broad range of acidic pH values. The maximum activities of lipolytic enzymes from the hepatopancreases of Hexaplex trunculus (molluscs) and Carcinus mediterranus (crustaceans) were found to be 50 and 60 °C, respectively, whereas the optimal temperature of lipolytic enzymes for the other species was classically around 40 °C. Thermoactivity of molluscs' lipolytic preparations makes them potential candidates in industrial applications. Among digestive glands studied, only pancreas (cartilaginous fish) contained the classically known colipase. Regarded as the most primitive living jawed vertebrates, cartilaginous fishes represented by sharks and rays could be considered as the oldest vertebrates possessing a complex digestive system like that of mammals.

Increased epicardial adipose tissue thickness correlates with endothelial dysfunction in spondyloarthritis.

INTRODUCTION: We aimed to investigate the relationship between epicardial adipose tissue (EAT) thickness, flow-mediated dilation (FMD), and carotid intima-media thickness (cIMT) in spondyloarthritis (SpA) patients compared to healthy controls. METHODS: We performed a cross-sectional study including SpA patients aged ≤ 50 years without traditional cardiovascular risk factors and healthy controls matched for age and gender. Baseline characteristics, laboratory data, and SpA-related parameters were recorded. All participants underwent ultrasound examination with measurement of EAT thickness, FMD, and cIMT by both an experienced cardiologist and radiologist blinded to clinical data. The relationships between the ultrasound measurements were analyzed using Spearman's correlation coefficient and Person correlation. RESULTS: The study included 94 subjects (47 SpA and 47 healthy controls). The sex-ratio was 2.35; the median age of patients was 36 years (IQR: 28-46), and the median disease duration was 11 years (IQR: 5-16). Compared to the control group, SpA patients had significantly higher values of EAT thickness (p = 0.001) and cIMT (p < 0.0001). FMD values were significantly lower in SpA patients compared to controls (p = 0.008). The univariate analysis detected a significant negative association between EAT thickness and FMD (p = 0.026; r = - 0.325), and between left cIMT and FMD (p = 0.027; r = - 0.322). No association was found between EAT thickness and cIMT. CONCLUSION: EAT thickness, FMD, and cIMT were significantly impaired in SpA patients compared with healthy controls supporting evidence of accelerated atherosclerosis in SpA. EAT thickness was correlated to endothelial dysfunction suggesting the role of EAT in predicting the early reversible stages of atherosclerosis. Key Points • Spondyloarthritis is associated with impaired subclinical atherosclerosis markers accurately increased epicardial fat and carotid intima-media thickness and endothelial dysfunction. • Increased epicardial fat thickness is correlated with impaired endothelial function in spondyloarthritis patients.

Endothelial dysfunction and increased carotid intima-media thickness in patients with spondyloarthritis without traditional cardiovascular risk factors.

BACKGROUND: The aim of our study was to assess subclinical atherosclerosis in spondyloarthritis (SpA) by combining three ultrasound methods (flow-mediated dilation (FMD), carotid intima-media thickness (cIMT) and Ankle Brachial Index (ABI)) and to determine the predictive factors of theses parameters. METHODS: This was a case control study conducted over 12 months including 47 patients with SpA-free-cardiovascular (CV) disease in comparison with age and sex matched 47 healthy controls. Sociodemographic, clinical and biological features as well as therapeutic modalities were recorded in our patients. All subjects had Doppler ultrasound with measurement of cIMT, FMD and ABI. Ultrasound measurements were compared between patients and controls. Linear regression was performed and assessed by machine learning to determine the predictive models of markers of subclinical atherosclerosis. RESULTS: We found higher cIMT (p<0.0001), lower FMD (p=0.008) and higher left ABI (0.048) in patients with SpA compared with controls. cIMT was positively correlated to patient-related parameters (age, systolic blood pressure) and disease parameters (age at onset of SpA, disease duration and renal involvement). Biologically, cIMT was positively correlated with creatinine, blood-glocose, total cholesterol (CT) and CT/cholesterol-high density lipoprotein ratio. FMD was negatively correlated with male gender, age, systolic blood pressure, creatinine, blood glucose and Left Lequesne Index. ABI was significantly associated with diastolic blood pressure. Multiple regression analysis identified age, CT and creatinine as independents predictive factors for increased cIMT. Regarding endothelial dysfunction, blood glucose and Left Lequesne Index were the independents predictive factors of decreased FMD. CONCLUSION: Our study supported the accelerated subclinical atherosclerosis in patients with SpA. This subclinical atherosclerosis was mainly mediated by traditional CV risk factors.

Purification and characterization of the first recombinant bird pancreatic lipase expressed in Pichia pastoris: the turkey.

BACKGROUND: The turkey pancreatic lipase (TPL) was purified from delipidated pancreases. Some biochemical properties and kinetic studies were determined using emulsified system and monomolecular film techniques. Those studies have shown that despite the accumulation of free fatty acids at the olive oil/water interface, TPL continues to hydrolyse efficiently the olive oil and the TC4 in the absence of colipase and bile salts, contrary to most classical digestive lipases which denaturate rapidly under the same conditions. The aim of the present study was to express TPL in the methylotrophic yeast Pichia pastoris in order to get a large amount of this enzyme exhibiting interesting biochemical properties, to purify and characterize the recombinant enzyme. RESULTS: The recombinant TPL was secreted into the culture medium and the expression level reached about 15 mg/l after 4 days of culture. Using Q-PCR, the number of expression cassette integrated on Pichia genomic DNA was estimated to 5. The purified rTPL, with molecular mass of 50 kDa, has a specific activity of 5300 U/mg on emulsified olive oil and 9500 U/mg on tributyrin. The optimal temperature and pH of rTPL were 37°C and pH 8.5. The stability, reaction kinetics and effects of calcium ions and bile salts were also determined. CONCLUSIONS: Our results show that the expressed TPL have the same properties as the native TPL previously purified. This result allows us the use of the recombinant enzyme to investigate the TPL structure-function relationships.

Studies of crab digestive phospholipase acting on phospholipid monolayers: Activation by temperature.

Secreted phospholipases A2 (sPLA2) are water-soluble lipolytic enzymes that act at the interface of organized lipid substrates, where the catalytic step is coupled to various interfacial phenomena as enzyme penetration, solubilisation of reaction products, lateral packing and loss of mechanical stability of organized assemblies of phospholipid molecule, among others. Using the monomolecular film technique, we compared the interfacial properties of crab digestive sPLA2 (CDPL) with those of the porcine pancreatic one (PPPL). A kinetic study on the surface pressure dependency of the two sPLA2 was performed using monomolecular films of three different substrates: di C12-PC (1.2-dilauroyl-sn-glycerol-3-phosphocholine); di C12-PG (1.2-dilauroyl-sn-glycerol-3-phosphoglycerol) and di C12-PE (1.2-dilauroyl-sn-glycerol-3-phosphoethanolamine). The use of a substrate in monolayer state, during the catalytic reactions, allows us to monitor the effect of several physicochemical parameters by altering the "quality of interface". The effect of temperature on the hydrolysis rate of these substrates was also checked. Our results show that activities of both phospholipases were affected by the variation of the subphase temperature. CDPL was irreversibly inactivated by p-bromo-phenacyl bromide, the specific inhibitor of sPLA2. The hyperbolic catalytic behaviour observed was coherent with hopping mode of action, one of the two characteristic mechanisms of interfacial catalysis of sPLA2.

Intestinal phospholipase A2 from Sparidae species: Functional properties and cytotoxic potential evaluation.

Marine species have gained significant attention as potential source for a broad spectrum of bioactive proteins. Fish phospholipases A2 (PLA2) have attracted renewed interest due to their excellent properties in lipid digestion. Herein, we report for the first time the catalytic properties of two intestinal secreted PLA2 (sPLA2) identified from Diplodus sargus (IDsPLA2) and Sparus aurata (ISaPLA2). The highest sequence identity was obtained with recently isolated Sparidae digestive PLA2 (45%) and Human pancreatic PLA2 (42%). IDsPLA2 and ISaPLA2 were overexpressed in E. coli as inclusion bodies, refolded and purified. Both enzymes have improved thermostability compared to mammalian pancreatic sPLA2 since they are active and stable at 55 °C, with specific activities of 320 and 190 U mg-1 measured on phosphatidylcholine, respectively. Interestingly, IDsPLA2, but not ISaPLA2, revealed weak toxicity towards macrophages and suggests its involvement in cell membrane degradation. ISaPLA2 was found to be more active than IDsPLA2 when using the monolayer technique at 20 mN m-1. Structural models of both enzymes revealed their differences. In silico docking of phospholipids with both models allowed proposing key amino-acids in substrate binding and selectivity. Overall, these results provide insight into the enzymatic and structural properties of two novel sPLA2 with potential for future applications.

Dissecting the Interaction Deficiency of a Cartilaginous Fish Digestive Lipase with Pancreatic Colipase: Biochemical and Structural Insights.

A full-length cDNA encoding digestive lipase (SmDL) was cloned from the pancreas of the smooth-hound (Mustelus mustelus). The obtained cDNA was 1350 bp long encoding 451 amino acids. The deduced amino acid sequence has high similarity with known pancreatic lipases. Catalytic triad and disulphide bond positions are also conserved. According to the established phylogeny, the SmDL was grouped with those of tuna and Sparidae lipases into one fish digestive lipase cluster. The recently purified enzyme shows no dependence for bile salts and colipase. For this, the residue-level interactions between lipase-colipase are yet to be clearly understood. The structural model of the SmDL was built, and several dissimilarities were noticed when analyzing the SmDL amino acids corresponding to those involved in HPL binding to colipase. Interestingly, the C-terminal domain of SmDL which holds the colipase shows a significant role for colipase interaction. This is apt to prevent the interaction between fish lipase and the pancreatic colipase which and can provide more explanation on the fact that the classical colipase is unable to activate the SmDL.

Purification and biochemical characterization of an organic solvent-tolerant and detergent-stable lipase from Staphylococcus capitis.

A mesophilic bacterial culture, producing an extracellular alkaline lipase, was isolated from the gas-washing wastewaters generated from the Sfax phosphate plant of the Tunisian Chemical Group and identified as Staphylococcus capitis strain. The lipase, named S. capitis lipase (SCL), has been purified to homogeneity from the culture medium. The purified enzyme molecular weight was around 45 kDa. Specific activities about 3,900 and 500 U/mg were measured using tributyrin and olive oil emulsion as substrates, respectively at 37°C and pH 8.5. Interestingly, the SCL maintained more than 60% of its initial activity over a wide pH values ranging from 5 to 11 with a high stability between pH 9 and 11 after 1 hr of incubation at room temperature. The lipase activity was enhanced in the presence of 2 mM of Mg2+ , Ca2+ , and K+ . SCL showed significant stability in the presence of detergents and organic solvents. Altogether, these features make the SCL useful for industrial applications. Besides, SCL was compatible with commercially available detergents, and its incorporation increases lipid degradation performances making it a potential candidate in detergent formulation.