Effect of degree of conversion on the surface properties of polymerized resin cements used for luting glass fiber posts.

STATEMENT OF PROBLEM: Lack of conversion of resin cements for luting glass fiber posts in deeper levels of the root canal may compromise clinical performance. PURPOSE: The purpose of this in vitro study was to evaluate the effect of the degree of conversion on the surface properties of dual-polymerized resin cements used for cemented glass fiber posts according to the root level. MATERIAL AND METHODS: Fifty maxillary central incisor teeth were endodontically treated, and glass fiber posts were cemented using the following systems: self-adhesive dual-polymerized resin luting cement (RelyX U200) and dual-polymerizing flowable core and a post luting system (Rebilda DC) with a self-etching adhesive (Futurabond DC). The degree of conversion was determined via attenuated total reflectance and Fourier transform infrared spectroscopy, and surface microhardness and cement film thickness were measured. The intraradicular fit was evaluated with microscopy. All tests were performed in the coronal, middle, and apical third of the root canal. Statistical analysis was done with ANOVA and the multiple comparison Tukey test (α=.05). RESULTS: The degree of conversion was higher in the coronal third using Rebilda DC (65.3 ±4.8%) than RelyX U200 (38.7 ±5.3%) (P<.05); on both resin cements, these values decreased from the coronal to the apical third (30.9 ±3.7%, 61.9 ±8.7%, respectively). The cement film thickness was higher for RelyX U200 in the 3 thirds than for Rebilda DC; significant differences (P<.05) were recorded in both cementing systems in the coronal and apical thirds. In the middle third, no significant differences were observed (P>.05). The mean surface microhardness values increased in the coronal thirds and decreased with increasing root canal depth. The marginal seal in the coronal thirds and the intraradicular fit in the middle thirds showed closer adaptation; however, some tags were observed in the interface resin cement and radicular dentin. Gap and tag formations were observed in the apical third. CONCLUSIONS: Depending on the root canal third, the surface properties of dual-polymerized resin cements are influenced by the degree of conversion.

Calcium hydroxide/iodoform nanoparticles as an intracanal filling medication: synthesis, characterization, and in vitro study using a bovine primary tooth model.

The aims of this in vitro study were to synthesize, characterize, and evaluate the efficacy of a Calcium Hydroxide/Iodoform nanoparticles (CHIN) paste compared with Ultrapex as intracanal filling medication using an experimental model of bovine primary teeth. CH nanoparticle synthesis was performed via the simple hydrolysis technique of reacting calcium nitrate with sodium hydroxide. SEM-EDS and FT-IR analyses were used to characterize the obtained product. 30% of CH nanoparticles were combined with 40% of iodoform and 30% silicone oil to prepare an intracanal filling paste (CHIN). All endodontic procedures were performed on 34 uniradicular primary bovine teeth. Every root canal was instrumented with K files (up to #35) and obturated with the nanoparticle paste (experimental) or Ultrapex® (control). Three outcome variables were studied: penetration depth through the root dentinal tubules, Ca2+ ion release, and filling paste dissolution rate. The obtained data were analyzed by Student's t test. The X-ray diffraction pattern of CH nanoparticles showed characteristic peaks at CH, as confirmed by FT-IR analyses in which an intense signal was observed at 3643 cm-1, characteristic of CH. In the morphological characterization, CH particles could be detected at the nanosize scale. When applied as intracanal filling, the CHIN paste exhibited a higher level of penetration through the root dentin tubules. The global mean penetration measures were 500 µm for the experimental paste and 380 µm for the control paste (p < 0.05). The release of Ca2+ ions (up to the seventh day) and the dissolution rate were significantly higher in the experimental paste group than in the control group. No significant differences were observed between the groups regarding pH levels. The findings of this study suggest the potential suitability of CHI nanoparticles as an alternative intracanal filling medication for infected or devitalized primary teeth.

Efficacy of alendronic acid solution in removal calcium hydroxide from root canals.

Background: Intracanal medication is considered an alternative after instrumentation in the case of pulp necrosis. However, the elimination of this medication plays an important role in the obturation process, which is why various chelating solutions have currently been studied for this purpose. Therefore, this study aimed to analyze the irrigant based on alendronic acid (AA), which contains in its chemical structure functional groups capable of forming complexes with Ca2+ ions. Material and Methods: 90 single-rooted teeth were crowned and standardized to a length of 13 mm. They were instrumented with a progressive K file (Dentsply Maillefer) from #15 to #30. Ca(OH)2 was placed as intracanal medication for 7 days. The roots were randomly divided into the following 4 experimental groups (n=13) according to the irrigant used: 2.25% NaClO, calcium suspension, 0.22% AA, and 10% citric acid; as well as negative (n=5; saline solution) and positive controls (n=5, 17% EDTA). The roots were divided longitudinally and the % of permeable dentinal tubules (% PDT) was determined by thirds (cervical, middle and apical), by analyzing the micrographs obtained by scanning electron microscope (SEM) and the imageJ program. The quantification of the remaining Ca2+ was determined using the Arsenazo III technique. Results: The Kruskal Wallis test was used for the % of permeable dentinal tubules where a significant difference was determined for the different thirds (p<0.005). In the apical third, citric acid and AA irrigants presented a median of 17.71 and 17.51 % PDT respectively. In relation to the quantification of the remaining total calcium, the lowest value was found with AA with a concentration of 4.83 mmol/L. Conclusions: The 0.22% AA solution has the same capacity to remove Ca(OH)2 from the root canal walls as 17% EDTA and 10% citric acid. Key words:Alendronic acid, calcium hydroxide, citric acid, EDTA, irrigant solution,root canal.

Investigation of the thermal and physicochemical behavior of two types of gutta-percha cones for back-filling the root canal.

Background: Gutta-percha (Gp) is an inert thermoplastic polymer used as a filling to replace the dental pulp space, which has been reformulated to improve its three-dimensional sealing properties. Therefore, this study aimed to analyze the physical, chemical and thermal properties of two types of gutta-percha filling. As well as measuring the temperature distribution along the cone at the time of cutting through an in-situ test. Material and Methods: Two commercially available brands of gutta-percha point were investigated: Conform Fit TM Gutta-Percha for ProTaper Gold® (PTG) (Dentsply Sirona), and Hygenic Gutta-Percha (Coltene whaledent). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were selected for the thermal characterization of materials, and Fourier Transform Infrared Spectroscopy (FT-IR) for the chemical analysis of Gp cones. Regarding temperature distribution, it was evaluated using a thermographic camera (FLIR ONE® PRO by MicroUSB P/N 435-0011-01) at 0 to 20 s after the cutting process (n=11/group). Results: Both materials have three fusion endotherms associated with the three crystalline phases of Gp, with similar temperatures but enthalpies that differ by 60%, the fusion enthalpy being higher for Conform Fit. In the chemical characterization, elements such as Zn, C, O, Ba, S and Si were found in both materials but in different proportions. Regarding the content of fillers, the Conform Fit presented around 30% of Gp polymer and 25% for the Hygenic. The morphological characterization shows a microtexturized coating in the form of bars on a micrometric scale for the Conform Fit, which could favor a better three-dimensional seal. In addition to that, in heat transfer studies they showed greater temperature control. Conclusions: The characterization of the materials allowed us to see the variation in terms of their composition and configuration to the Gp cones of two commercial brands. These variations directly modify the thermal behavior of the material. Key words:Gutta-percha, Conform Fit, Infrared thermography, Differential Scanning Calorimetry, Infrared Spectroscopy.

Effect of microwave polymerization on the thermomechanical and surface properties of ocular prosthetic acrylic resins.

BACKGROUND: Polymerization conditions affect the physical-mechanical properties of acrylic resins used for craniofacial prostheses. OBJECTIVE: The aim of this study was to evaluate the effect of microwave polymerization on the thermomechanical properties and surface morphology of ocular prostheses fabricated with polymethyl methacrylate (PMMA). METHODS: PMMA discs were polymerized with microwave energy and with conventional heat polymerization (CHP) method. Ocular prostheses were fabricated to determine whether there were changes according to the polymerization method. The surface morphology and roughness were observed under SEM and AFM. The Vickers Hardness number (VHN) and flexural strength were measured. Thermal properties were evaluated with TGA/DSC, and chemical composition with FTIR. RESULTS: The PMMA acrylic resin polymerized with microwave energy showed a smooth surface with some relief areas. In the internal surface of the ocular prosthesis with microwave energy the PMMA is more compact. The mean roughness values were higher and statistically significant with CHP (P < 0.05), while the surface hardness and flexural strength were higher with microwave energy (P < 0.05). CONCLUSION: There were no changes in the calorimetry with either method, TGA showed an exothermic peak around 120 °C with CHP method. PMMA polymerized with microwave energy improved the mechanical and surface properties of the ocular prostheses.

Surface degradation and biofilm formation on hybrid and nanohybrid composites after immersion in different liquids.

PURPOSE: This study evaluated the association of surface degradation and formation of Streptococcus mutans (S. mutans) biofilm in resin-based composites (RBCs) after storage in different acidic liquids. METHODS: To evaluate microhardness and surface micromorphology, hybrid and nanohybrid RBC discs were stored in artificial gastric acid, cola drink, orange juice, artificial saliva, and distilled water for three intervals of 15 min per day for 7, 15, and 30 days. After 30 days of storage, surface roughness was analyzed, and the RBC discs were placed in a biofilm reactor inoculated with S. mutans to evaluate surface biofilm formation. RESULTS: As compared with nanohybrid RBCs, roughness and surface microhardness values were significantly lower (P < 0.05) for hybrid RBCs stored in artificial gastric acid, followed by specimens stored in cola drink and orange juice. Artificial gastric acid caused greater surface degradation, which increased the biomass of S. mutans on the surface of both RBC types. CONCLUSION: Surface degradation of hybrid and nanohybrid RBCs correlated with the pH of the liquid, while S. mutans biofilm formation was associated with increased surface roughness in hybrid RBCs.

RGD-functionalization of PLA/starch scaffolds obtained by electrospinning and evaluated in vitro for potential bone regeneration.

The engineering of bone tissues represents an area of opportunity for the development of new polymeric compounds. In this context, the objective of this work is the generation and evaluation in vitro of supports obtained from mixtures of starch with poly (lactic acid) (PLA), treated with arginine-glycine-aspartic acid peptides (RGD). For this, non-woven fibers of PLA with different starch content (0.0, 2.5, 5.0 and 10.0%wt) were obtained using the electrospinning technique. Then the physical absorption of RGD was carried out, with the aim of increasing the cellular adhesion of the polymeric material. Subsequently, in vitro biocompatibility tests were performed, and viability (LIFE/DEAD), proliferation (MTS assay) and cell adhesion were carried out with osteoblasts incubated for 48 h. Regarding biocompatibility results, only viable cells were found for all the compositions, and the biocompatibility of the materials was validated by the morphological analysis of the cultured cells, where extended cells were observed. Proliferation assays show that osteoblasts proliferate better on the surfaces of PLA and PLA with 5.0% starch scaffolds. Therefore, it is concluded that the scaffolds obtained by electrospinning of PLA with starch and functionalized with RGD are promising for its use in the regeneration of bone tissue.