A collaborative study to establish the 3rd WHO International Standard for hepatitis B virus for nucleic acid amplification techniques.

Nucleic acid amplification techniques (NAT) are routinely used for clinical diagnostics and monitoring hepatitis B virus (HBV) infections, and are implemented on a voluntary basis for blood screening. A collaborative study was performed to evaluate a replacement WHO International Standard for HBV for the standardization of NAT. Two lyophilised HBV candidates were evaluated by 16 laboratories worldwide, alongside the existing HBV International Standard. The overall mean potency estimates for the candidate samples 1 and 2, relative to sample 3 (2nd HBV International Standard), from quantitative assays, were 5.93 and 5.98 log10 International Units (IU)/mL respectively. The variability in individual laboratory mean estimates for samples 1-3 for quantitative assays was ∼0.3 log10 IU/mL. The inter-laboratory variability for qualitative assays was higher. Accelerated thermal degradation studies indicate that both lyophilised candidates are stable and suitable for long-term use. Overall, the results suggested that both candidates were suitable as replacement International Standards. Sample 1 (NIBSC code 10/264) was established as the 3rd WHO International Standard for HBV for NAT with an assigned potency of 850,000 IU/mL (∼5.93 log10 IU/mL), when reconstituted in 0.5 mL of nuclease-free water. It is intended for the calibration (in IU) of secondary reference materials used in HBV NAT.

Are We There Yet? Impact of the First International Standard for Cytomegalovirus DNA on the Harmonization of Results Reported on Plasma Samples.

BACKGROUND: Interassay harmonization of cytomegalovirus (CMV) DNA measurement is important for infection management. Uncertainty exists regarding the result harmonization achievable in patient plasma samples using quantitative polymerase chain reaction (qPCR) assays with calibrators now traceable to the First World Health Organization International Standard (IS) for CMV DNA. METHOD: Serial dilutions of the IS and a blinded panel of 40 genotyped CMV DNA-positive pooled plasma samples and 10 negative plasma samples were tested by 6 laboratories using 10 qPCR assays calibrated to the IS. Each clinical sample was constructed using plasma from a single unique transplant recipient. RESULTS: The variance for individual CMV DNA-positive samples was greater for clinical samples (median, 1.50 [range, 1.22-2.82] log10 IU/mL) than for IS dilutions (median, 0.94 [range, 0.69-1.35] log10 IU/mL) (P < .001); 58.9% of all clinical sample results and 93.6% of IS dilution results fell within ±0.5 log10 IU/mL of the mean viral load of each sample. Result variability was not impacted by either genotype or quantitative levels of CMV DNA. Testing procedure differences can significantly influence results, even when analyte-specific reagents are identical. For clinical samples, all assays demonstrated result bias (P < .008). Assays with amplicon sizes ≤86 bp had significantly higher results compared to assays with larger amplicon sizes (≥105 bp) (P < .001). CONCLUSIONS: The variability in CMV DNA results reported on individual samples has been reduced by the IS, but ongoing clinically relevant variability persists, preventing meaningful interassay result comparison.

A collaborative study to establish the 1st WHO International Standard for human cytomegalovirus for nucleic acid amplification technology.

Variability in the performance of nucleic acid amplification technology (NAT)-based assays presents a significant problem in the diagnosis and management of human cytomegalovirus (HCMV) infections. Here we describe a collaborative study to evaluate the suitability of candidate reference materials to harmonize HCMV viral load measurements in a wide range of NAT assays. Candidate materials comprised lyophilized Merlin virus, liquid Merlin virus, liquid AD169 virus, and purified HCMV Merlin DNA cloned into a bacterial artificial chromosome. Variability in the laboratory mean HCMV concentrations determined for virus samples across the different assays was 2 log10. Variability for the purified DNA sample was higher (>3 log10). The agreement between laboratories was markedly improved when the potencies of the liquid virus samples were expressed relative to the lyophilized virus candidate. In contrast, the agreement between laboratories for the purified DNA sample was not improved. Results indicated the suitability of the lyophilized Merlin virus preparation as the 1st WHO International Standard for HCMV for NAT. It was established in October 2010, with an assigned potency of 5 × 10(6) International Units (IU) (NIBSC code 09/162). It is intended to be used to calibrate secondary references, used in HCMV NAT assays, in IU.

A collaborative study to establish the 1st WHO International Standard for Epstein-Barr virus for nucleic acid amplification techniques.

Variability in viral load measurements using nucleic acid amplification techniques (NAT) has a significant impact on the management of Epstein-Barr virus (EBV)-associated diseases, and has highlighted a need for standardisation of these measurements. The aim of this collaborative study was to evaluate the suitability of a range of candidate reference materials to harmonise EBV viral load measurements in a wide range of NAT assays. Candidate materials included lyophilised and liquid whole virus preparations of the EBV B95-8 strain, and preparations of Namalwa and Raji cells. Variability between the individual laboratory mean estimates for each candidate was 2.5 log10 copies/mL. The agreement between laboratories was improved when the potency of each candidate was expressed relative to the lyophilised B95-8 preparation. The results of the study indicate the suitability of this candidate as the 1st WHO International Standard for EBV for NAT. It was established in October 2011 by the WHO's Expert Committee on Biological Standardisation with an assigned potency of 5 × 10(6) International Units (IU) (NIBSC code 09/260). It is intended to be used for the calibration of secondary reference materials, used in EBV NAT assays, in IU, thereby improving the comparability of patient viral load measurements.

Establishment of the 1st World Health Organization international standards for human papillomavirus type 16 DNA and type 18 DNA.

A World Health Organization collaborative study was conducted to evaluate candidate international standards for human papillomavirus (HPV) Type 16 DNA (NIBSC code 06/202) and HPV Type 18 DNA (NIBSC code 06/206) for use in the amplification and detection steps of nucleic acid-based assays. The freeze-dried candidate international standards were prepared from bulk preparations of cloned plasmid containing full-length HPV-16 or HPV-18 genomic DNA. Nineteen laboratories from 13 countries participated in the study using a variety of commercial and in-house quantitative and qualitative assays. The data presented here indicate that, upon freeze-drying, there is no significant loss in potency for the candidate HPV-18 DNA and a slight loss in potency for the candidate HPV-16 DNA; although this is likely not scientifically relevant when assay precision is considered. In general, the individual laboratory mean estimates for each study sample were grouped +/- approximately 2 log(10) around the theoretical HPV DNA concentration of the reconstituted ampoule (1 x 10(7) HPV genome equivalents/mL). The agreement between laboratories is improved when potencies are made relative to the candidate international standards, demonstrating their utility in harmonizing amplification and detection steps of HPV-16 and -18 DNA assays. Degradation studies indicate that the candidate international standards are extremely stable and suitable for long-term use. Based on these findings, the candidate standards were established as the 1st WHO international standards for HPV-16 DNA and HPV-18 DNA, each with a potency of 5 x 10(6) international units (IU) per ampoule or 1 x 10(7) IU mL(-1) when reconstituted as directed.

Establishment of the 1st World Health Organization International Standard for Plasmodium falciparum DNA for nucleic acid amplification technique (NAT)-based assays.

BACKGROUND: In order to harmonize results for the detection and quantification of Plasmodium falciparum DNA by nucleic acid amplification technique (NAT)-based assays, a World Health Organization (WHO) collaborative study was performed, evaluating a series of candidate standard preparations. METHODS: Fourteen laboratories from 10 different countries participated in the collaborative study. Four candidate preparations based upon blood samples parasitaemic for P. falciparum were evaluated in the study. Sample AA was lyophilized, whilst samples BB, CC and DD were liquid/frozen preparations. The candidate standards were tested by each laboratory at a range of dilutions in four independent assays, using both qualitative and quantitative NAT-based assays. The results were collated and analysed statistically. RESULTS: Twenty sets of data were returned from the participating laboratories and used to determine the mean P. falciparum DNA content for each sample. The mean log10 "equivalents"/ml were 8.51 for sample AA, 8.45 for sample BB, 8.35 for sample CC, and 5.51 for sample DD. The freeze-dried preparation AA, was examined by accelerated thermal degradation studies and found to be highly stable. CONCLUSION: On the basis of the collaborative study, the freeze-dried material, AA (NIBSC code No. 04/176) was established as the 1st WHO International Standard for P. falciparum DNA NAT-based assays and has been assigned a potency of 10(9) International Units (IU) per ml. Each vial contains 5 x 10(8) IU, equivalent to 0.5 ml of material after reconstitution.

International collaborative study on the 3rd WHO International Standard for hepatitis B surface antigen.

BACKGROUND: The WHO International Standard (IS) for hepatitis B surface antigen (HBsAg) is used to standardize HBsAg assays. Stocks of the 2nd IS for HBsAg are depleted. The proposal to establish its replacement was endorsed by WHO in 2012. OBJECTIVE: Preparation of a freeze-dried candidate 3rd IS (NIBSC 12/226); evaluation of its suitability in a WHO international collaborative study; calibration of its potency in International Units (IU). STUDY DESIGN: The 3rd IS is based on plasma-derived, purified, inactivated HBsAg from Vietnam. Qualitative and quantitative HBsAg assays were used to evaluate 12/226 alongside the 2nd IS and 1st IS. Blinded study samples included a duplicate of 12/226, a negative control and two diluted plasma samples representing hepatitis B virus (HBV) genotypes A and B. RESULTS: Twelve laboratories from 9 countries returned 22 data sets from 15 methods. The overall geometric mean potency of 12/226 is 47.3IU/mL (±13% CV) when compared to the 2nd IS with HBV subgenotype A2. The 3rd IS has HBV subgenotype B4 with a heterogeneous HBsAg subtype population of ayw1 and adw2. Some genotype-dependent effects on the inter-laboratory variability were observed but overall mean potencies were virtually identical irrespective of the IS used for calibration. Stability studies indicate that the candidate is stable for long-term use. CONCLUSIONS: 12/226 was established in October 2014 by the WHO Expert Committee on Biological Standardization as the 3rd IS for HBsAg with a potency of 47.3IU per ampoule maintaining the continuity in the standardization of HBsAg assays.

The 2nd International Standard for Interleukin-2 (IL-2). Report of a collaborative study.

Two candidate preparations of human sequence recombinant Interleukin-2 (IL-2) were formulated and lyophilized at NIBSC prior to evaluation in a collaborative study for their suitability to serve as a replacement international standard. The preparations were tested by eight laboratories using in vitro bioassays and immunoassays. The candidate preparation 86/500 was judged suitable to serve as a replacement international standard based on the data obtained for activity and stability. On the basis of the results reported here, the preparation coded 86/500 was established by the WHO Expert Committee on Biological Standardisation (ECBS) in 2012 as the WHO 2nd IS for human IL-2 with an assigned value for IL-2 activity of 210IU/ampoule. Calibration of the 2nd IS is primarily based on the bioassay in use in various laboratories and relies exclusively on the estimates calculated relative to the WHO 1st IS for continuity of the IU.

The 1st International standard for transforming growth factor-ß3 (TGF-ß3).

One candidate preparation of human sequence recombinant transforming growth factor-ß3 (TGF-ß3) was formulated and lyophilized at NIBSC prior to evaluation in a collaborative study for its suitability to serve as an international standard. The preparation was tested by 8 laboratories using in vitro bioassays and immunoassays. The candidate preparation 09/234 was judged suitable to serve as an international standard based on the data obtained for biological activity and stability. On the basis of the results reported here, the preparation coded 09/234 was established by the WHO Expert Committee on Biological Standardisation (ECBS) as the WHO 1st IS for human TGF-ß3 with an assigned value for TGF-ß3 activity of 19,000 IU/ampoule.

The 2nd International Standard for human granulocyte colony stimulating factor.

Five candidate preparations of human sequence recombinant granulocyte-colony stimulating factor (G-CSF) were formulated and lyophilized at NIBSC prior to evaluation in a collaborative study for their suitability to serve as a replacement International Standard (IS). The preparations were tested by 13 laboratories using in vitro bioassays. The candidate preparation 09/136 was judged suitable to serve as a replacement international standard based on the data obtained for biological activity and stability. On the basis of the results reported here, the preparation coded 09/136 was established by the WHO Expert Committee on Biological Standardization (ECBS) as the 2nd IS for human G-CSF with an assigned value for G-CSF activity of 95,000 IU/ampoule. Calibration of the 2nd IS is primarily based on the bioassay in use in various laboratories and relies entirely on the estimates calculated relative to the WHO 1st IS for continuity of the IU.

An International Standard for whole blood folate: evaluation of a lyophilised haemolysate in an international collaborative study.

Folate measurements, particularly for whole blood, show wide inter-laboratory and inter-methodology variability. This variability appears to be due in part to the lack of internationally accepted reference materials. A whole blood haemolysate, lyophilised in ampoules and designated 95/528, was therefore evaluated by 15 laboratories in five countries for its suitability as an International Standard (IS) for whole blood folate. The preparation was assayed using a variety of microbiological and protein-binding methodologies against local standards and calibrators. A consensus folate content was assigned to 95/528. The inclusion of three whole blood samples in the study with widely differing folate levels demonstrated a considerable reduction in inter-laboratory variability when the folate content of the samples was determined relative to the proposed IS 95/528 rather than to laboratories' local standards and calibrators. Accelerated degradation studies indicated that the folate content of 95/528 is stable when stored at -20 degrees C. On the basis of the results presented here, the World Health Organization Expert Committee on Biological Standardization established 95/528 as an IS for whole blood folate.

Calibration and use of an in-house anti-measles IgG standard serum

For the purpose of research a large quantity of anti-measles IgG working reference serum was needed. A pool of sera from five teenagers was prepared and named Alexandre Herculano (AH). In order to calibrate the AH serum, 18 EIA assays were performed testing in parallel AH and the 2nd International Standard 1990, Anti-Measles Antibody, 66/202 (IS) in a range of dilutions (from 1/50 to 1/25600). A method which compared parallel lines resulting from the graphic representation of the results of laboratory tests was used to estimate the power of AH relative to IS. A computer programme written by one of the authors was used to analyze the data and make potency estimates. Another method of analysis was used, comparing logistic curves relating serum concentrations with optical density by EIA. For that purpose an existing computer programme (WRANL) was used. The potency of AH relative to IS, by either method, was estimated to be 2.4. As IS has 5000 milli international units (mIU) of anti-measles IgG per millilitre (ml), we concluded that AH has 12000 mIU/ml.