A novel strategy to map a locus associated with flowering time in canola (Brassica napus L.).

Flowering time is an important agronomic trait for canola breeders, as it provides growers with options for minimizing exposure to heat stress during flowering and to more effectively utilize soil moisture. Plants have evolved various systems to control seasonal rhythms in reproductive phenology including an internal circadian clock that responds to environmental signals. In this study, we used canola cultivar 'Westar' as a recurrent parent and canola cultivar 'Surpass 400' as the donor parent to generate a chromosome segment substitution line (CSSL) and to map a flowering time locus on chromosome A10 using molecular marker-assisted selection. This CSSL contains an introgressed 4.6 mega-bases (Mb) segment (between 13 and 17.6 Mb) of Surpass 400, which substantially delayed flowering compared with Westar. To map flowering time gene(s) within this locus, eight introgression lines (ILs) were developed carrying a series of different lengths of introgressed chromosome A10 segments using five co-dominant polymorphic markers located at 13.5, 14.0, 14.5, 15.0, 15.5, and 16.0 Mb. Eight ILs were crossed with Westar reciprocally and flowering time of resultant 16 F1 hybrids and parents were evaluated in a greenhouse (2021 and 2022). Four ILs (IL005, IL017, IL035, and IL013) showed delayed flowering compared to Westar (P < 0.0001), and their reciprocal crosses displayed a phenotype intermediate in flowering time of both homozygote parents. These results indicated that flowering time is partial or incomplete dominance, and the flowering time locus mapped within a 1 Mb region between two co-dominant polymorphic markers at 14.5-15.5 Mb on chromosome A10. The flowering time locus was delineated to be between 14.60 and 15.5 Mb based on genotypic data at the crossover site, and candidate genes within this region are associated with flowering time in canola and/or Arabidopsis. The co-dominant markers identified on chromosome A10 should be useful for marker assisted selection in breeding programs but will need to be validated to other breeding populations or germplasm accessions of canola.

Improving the Stability and Kinetic Inertness of Mn(II) Complexes by Increasing the Bridge Length in Bicyclic CDTA-Like Ligands.

Kinetic inertness of Mn(II)-based MRI contrast agents can be improved by increasing the rigidity of the polydentate ligand that tightly coordinate the metal ion. Taking inspiration from the remarkable increase in kinetic inertness of [Mn(CDTA)]2- compared to [Mn(EDTA)]2- due to the cyclohexyl backbone rigidity, we devised that bicyclic ligands would further improve the kinetic inertness of the Mn(II) complexes. The length of the alkyl bridge on the cyclohexane ring was varied from methylene (BCH-DTA), ethylene (BCO-DTA) to propylene (BCN-DTA) to evaluate the influence of the different trans-diaminotetraacetate ligands on relaxometric, thermodynamic and kinetic properties of the Mn(II) complexes. 1H and 17O NMR relaxometric studies showed a slight increase in relaxivity and a faster water exchange rate in these Mn(II)-complexes with respect to [Mn(CDTA)]2-. Solution studies revealed that the conditional stability (pMn) and dissociation half-life (t1/2) at pH 7.4 follow the order [Mn(BCH-DTA)]2-<[Mn(BCO-DTA)]2-<[Mn(BCN-DTA)]2- highlighting the effect of the bridge length on the overall stability of the Mn(II) complexes. Remarkably, [Mn(BCN-DTA)]2- shows an improved pMn value and a 7-times higher kinetic inertness than [Mn(CDTA)]2-. NMR studies on the Zn(II) analogues confirm the rigidity of the bicyclic complexes with an isomerization process at >313 K for the smaller bridged complex [Zn(BCH-DTA)]2-.

Left Atrial Circulatory Assistance in Simulated Diastolic Heart Failure Model: First in Vitro and in Vivo.

BACKGROUND: We are developing a left atrial assist device (LAAD) that is implanted at the mitral position to treat diastolic heart failure (DHF) represented by heart failure with preserved ejection fraction. METHODS: The LAAD was tested at 3 pump speeds on a pulsatile mock loop with a pneumatic pump that simulated DHF conditions by adjusting the diastolic drive. The LAAD was implanted in 6 calves, and the hemodynamics were assessed. In 3 cases, DHF conditions were induced by using a balloon inserted into the left ventricle, and in 2 cases, mitral valve replacement was also performed after the second aortic cross-clamp. RESULTS: DHF conditions were successfully induced in the in vitro study. With LAAD support, cardiac output, aortic pressure and left atrial pressure recovered to normal values, whereas pulsatility was maintained for both in vivo and in vitro studies. Echocardiography showed no left ventricular outflow tract obstruction, and the LAAD was successfully replaced by a mechanical prosthetic valve. CONCLUSIONS: These initial in vitro and in vivo results support our hypothesis that use of the LAAD increases cardiac output and aortic pressure and decreases left atrial pressure, while maintaining arterial pulsatility.

MADS-box transcription factors determine the duration of temporary winter dormancy in closely related evergreen and deciduous Iris spp.

Winter dormancy (WD) is a crucial strategy for plants coping with potentially deadly environments. In recent decades, this process has been extensively studied in economically important perennial eudicots due to changing climate. However, in evergreen monocots with no chilling requirements, dormancy processes are so far a mystery. In this study, we compared the WD process in closely related evergreen (Iris japonica) and deciduous (I. tectorum) iris species across crucial developmental time points. Both iris species exhibit a 'temporary' WD process with distinct durations, and could easily resume growth under warm conditions. To decipher transcriptional changes, full-length sequencing for evergreen iris and short read RNA sequencing for deciduous iris were applied to generate respective reference transcriptomes. Combining results from a multipronged approach, SHORT VEGETATIVE PHASE and FRUITFULL (FUL) from MADS-box was associated with a dormancy- and a growth-related module, respectively. They were co-expressed with genes involved in phytohormone signaling, carbohydrate metabolism, and environmental adaptation. Also, gene expression patterns and physiological changes in the above pathways highlighted potential abscisic acid and jasmonic acid antagonism in coordinating growth and stress responses, whereas differences in carbohydrate metabolism and reactive oxygen species scavenging might lead to species-specific WD durations. Moreover, a detailed analysis of MIKCCMADS-box in irises revealed common features described in eudicots as well as possible new roles for monocots during temporary WD, such as FLOWERING LOCUS C and FUL. In essence, our results not only provide a portrait of temporary WD in perennial monocots but also offer new insights into the regulatory mechanism underlying WD in plants.

Evaluation of centrifugal blood pump performances for biventricular support in the virtual simulation model.

BACKGROUND: Despite the advances in the left ventricular assist device (LVAD), there are still situations that require a biventricular assist device (BVAD) system. The purpose of this study was to explore and compare the system performance interactions with the HeartMate3 (HM3) and HeartWare (HVAD) in a BVAD configuration using the virtual mock loop (VML) simulation tool. METHODS: The VML simulation tool is an in silico implementation of a lumped parameter model of the cardiovascular system with mechanical circulatory support. Patients with ejection fractions of 60%, 20%, and 15% were simulated in VML, and the HVAD and HM3 in a BVAD with ventricular cannulation were applied to simulated conditions. Pump speeds that restored baseline normal hemodynamics were determined. To determine the optimal speeds for BVAD, the left and right arterial pressures (LAP, RAP) were plotted. RESULTS: In the HVAD, LAP and RAP are balanced at 11 mm Hg with LVAD 3500 rpm, right ventricular assist device (RVAD) 2200 rpm; at 13 mm Hg with LVAD 3000 rpm, RVAD 1700 rpm; and at 14 mm Hg with LVAD 2500 rpm, RVAD 1300 rpm. For the HM3, at 8 mm Hg with LVAD 7000 rpm, RVAD 5000 rpm; at 9 mm Hg with LVAD 6000 rpm, RVAD 4300 rpm; and at 9.5 mm Hg with LVAD 5000 rpm, RVAD 3500 rpm. CONCLUSION: The RVAD/LVAD speed ratios required for atrial balance were approximately 0.6 for the HVAD and 0.7 for the HM3. However, the HVAD required RVAD speeds below its range of operation.

Boosting Bismuth(III) Complexation for Targeted α-Therapy (TAT) Applications with the Mesocyclic Chelating Agent AAZTA.

Targeted α therapy (TAT) is a promising tool in the therapy of cancer. The radionuclide 213 BiIII shows favourable physical properties for this application, but the fast and stable chelation of this metal ion remains challenging. Herein, we demonstrate that the mesocyclic chelator AAZTA quickly coordinates BiIII at room temperature, leading to a robust complex. A comprehensive study of the structural, thermodynamic and kinetic properties of [Bi(AAZTA)]- is reported, along with bifunctional [Bi(AAZTA-C4-COO- )]2- and the targeted agent [Bi(AAZTA-C4-TATE)]- , which incorporates the SSR agonist Tyr3 -octreotate. An unexpected increase in the stability and kinetic inertness of the metal chelate was observed for the bifunctional derivative and was maintained for the peptide conjugate. A cyclotron-produced 205/206 Bi mixture was used as a model of 213 Bi in labelling, stability, and biodistribution experiments, allowing the efficiency of [213 Bi(AAZTA-C4-TATE)]- to be estimated. High accumulation in AR42J tumours and reduced kidney uptake were observed with respect to the macrocyclic chelate [213 Bi(DOTA-TATE)]- .

Analysis of Cleveland Clinic continuous-flow total artificial heart performance using the Virtual Mock Loop: Comparison with an in vivo study.

The Virtual Mock Loop (VML) is a mathematical model designed to simulate mechanism of the human cardiovascular system interacting with mechanical circulatory support devices. Here, we aimed to mimic the hemodynamic performance of Cleveland Clinic's self-regulating continuous-flow total artificial heart (CFTAH) via VML and evaluate the accuracy of the VML compared with an in vivo acute animal study. The VML reproduced 124 hemodynamic conditions from three acute in vivo experiments in calves. Systemic/pulmonary vascular resistances, pump rotational speed, pulsatility, and pulse rate were set for the VML from in vivo data. We compared outputs (pump flow, left and right pump pressure rises, and atrial pressure difference) between the two systems. The pump performance curves all fell in the designed range. There was a strong correlation between the VML and the in vivo study in the left pump flow (r2 = 0.84) and pressure rise (r2 = 0.80), and a moderate correlation in right pressure rise (r2 = 0.52) and atrial pressure difference (r2 = 0.59). Although there is room for improvement in simulating right-sided pump performance of self-regulating CFTAH, the VML acceptably simulated the hemodynamics observed in an in vivo study. These results indicate that pump flow and pressure rise can be estimated from vascular resistances and pump settings.

Anti-clogging mechanisms of a motion-activated chest tube patency maintenance system: Histology and high-speed camera assessment.

The motion-activated system (MAS) employs vibration to prevent intraluminal chest tube clogging. We evaluated the intraluminal clot formation inside chest tubes using high-speed camera imaging and postexplant histology analysis of thrombus. The chest tube clogging was tested (MAS vs. control) in acute hemothorax porcine models (n = 5). The whole tubes with blood clots were fixed with formalin-acetic acid solution and cut into cross-sections, proceeded for H&E-stained paraffin-embedded tissue sections (MAS sections, n = 11; control sections, n = 11), and analyzed. As a separate effort, a high-speed camera (FASTCAM Mini AX200, 100-mm Zeiss lens) was used to visualize the whole blood clogging pattern inside the chest tube cross-sectional view. Histology revealed a thin string-like fibrin deposition, which showed spiral eddy or aggregate within the blood clots in most sections of Group MAS, but not in those of the control group. Histology findings were compatible with high-speed camera views. The high-speed camera images showed a device-specific intraluminal blood "swirling" pattern. Our findings suggest that a continuous spiral flow in blood within the chest tube (MAS vs. static control) contributes to the formation of a spiral string-like fibrin network during consumption of coagulation factors. As a result, the spiral flow may prevent formation of thick band-like fibrin deposits sticking to the inner tube surface and causing tube clogging, and thus may positively affect chest tube patency and drainage.

Effects of blood pump orientation on performance: In vitro assessment of universal advanced ventricular assist device.

An advanced ventricular assist device (VAD), which is under development in our institution, has specific features that allow changes in the axial rotor position and pump performance by intrapump pressure difference. However, performance could be influenced by the pump orientation because of the effect of gravity on the rotor position. The purpose of this study was to evaluate the effects of pump orientation on the pump performance, including pulse pressure and regurgitant flow through the pump when the pump was stopped. Bench testing of the VAD was performed on a static or pulsatile mock loop with a pneumatic device to simulate the native ventricle. The pump performance, including pressure-flow curve, pulsatility, and regurgitant flow, was evaluated at several angles, ranging from -90° (inlet pointed upward) to +90° (inlet pointed downward) at pump speeds of 2000, 2500, 3000, and 3500 rpm. The pump performance was slightly lower at +90° at all rotational speeds, compared with -90°. The pulse pressure on the pulsatile mock loop (80 bpm) was 50 mm Hg without pump support, remained at 50 mm Hg during pump support, and was not changed by orientation (-90°, 0°, and +90°). When the pump was stopped, the regurgitant flow was near 0 L/min at all angles. Pump orientation had a minor effect on pump performance, with no effect on pulse pressure or regurgitant flow when the pump was stopped. This indicates that the effect of gravity on the rotor assembly is insignificant.

A simulation tool for mechanical circulatory support device interaction with diseased states.

We have created a simulation model to investigate the interactions between a variety of mechanical circulatory support (MCS) devices and the circulatory system with various simulated patient conditions and disease states. The present simulation accommodates a family of continuous-flow MCS devices under various stages of consideration or development at our institution. This article describes the mathematical core of the in silico simulation system and shows examples of simulation output imitating various disease states and of selected in vitro and clinical data from the literature.

Surgery of acute occlusion of the extracranial internal carotid artery - a meta-analysis.

Acute occlusion of the extracranial internal carotid artery (eICA) is associated with poor prognosis. Surgical desobliteration has not received adequate attention in recent years. We therefore conducted a literature review and meta-analysis of surgical studies published after 2000 that treated eICA occlusion surgically in an emergency setting. The search identified 10 relevant articles that included a total of 175 patients. The outcomes analysed included rates of recanalization (93 %), early neurological improvement (66 %), modified Rankin Scale 0-2 (62 %), mortality (5 %), early reocclusion (4 %), in-hospital stroke (4 %) and symptomatic intracerebral haemorrhage (4 %). In conclusion, acute surgical desobliteration of eICA occlusion leads to high rates of recanalization and a majority of patients experience early neurological improvement and achieve favourable outcome. Rates of mortality, early reocclusion, in-hospital stroke and sICH are acceptable in the view of unfavourable natural history.

Development and Evaluation of Motion-activated System for Improved Chest Drainage: Bench, In Vivo Results, and Pilot Clinical Use of Technology.

Objective. The aim of this study was to evaluate a motion-activated system (MAS) that applies motion-activated energy (vibration) to prevent chest tube clogging and maintain tube patency. We performed chest tube blood flow analysis in vitro, studied MAS effects on intraluminal clot deposition in vivo, and conducted a pilot clinical test. Background. Chest tube clogging is known to adversely contribute to postoperative cardiac surgery outcomes. Methods. The MAS was tested in vitro with a blood-filled chest tube model for device acceleration and performance. In vivo acute hemothorax studies (n = 5) were performed in healthy pigs (48.0 ± 2 kg) to evaluate the drainage in MAS versus control (no device) groups. Using a high-speed camera (FASTCAM Mini AX200, 100 mm Zeiss lens) in an additional animal study (n = 1), intraluminal whole-blood activation imaging of the chest tube (32 Fr) was made. The pilot clinical study (n = 12) consisted of up to a 30 minutes device tolerance test. Results. In vitro MAS testing suggested optimal device performance. The 2-hour in vivo evaluation showed a longer incremental drainage in the MAS group versus control. The total drainage in the MAS group was significantly higher than that in the control group (379 ± 144 mL vs 143 ± 40 mL; P = .0097), indicating tube patency. The high-speed camera images showed a characteristic intraluminal blood "swirling" pattern. Clinical data showed no discomfort with the MAS use (pleural = 4; mediastinal = 8). Conclusions. The MAS showed optimal performance at bench and better drainage profile in vivo. The clinical trial showed patients' tolerance to the MAS and device safety.

Genome-Wide Association Studies and Transcriptome Changes during Acclimation and Deacclimation in Divergent Brassica napus Varieties.

Information concerning genes and signals regulating cold acclimation processes in plants is abundant; however, less is known about genes and signals regulating the deacclimation process. A population of primarily winter B. napus varieties was used to conduct a genome-wide association study and to compare the transcriptomes from two winter B. napus varieties showing time-dependent differences in response to cold acclimation and deacclimation treatments. These studies helped to identify loci, candidate genes, and signaling processes impacting deacclimation in B. napus. GWAS identified polymorphisms at five different loci associated with freezing tolerance following deacclimation. Local linkage decay rates near these polymorphisms identified 38 possible candidate genes. Several of these genes have been reported as differentially regulated by cold stress in arabidopsis (Arabidopsis thaliana), including a calcium-binding EF-hand family protein (encoded by BnaCnng10250D) that was also differentially expressed during deacclimation in this study. Thousands of other genes differentially expressed during the acclimation and deacclimation treatments implicated processes involving oxidative stress, photosynthesis, light-regulated diurnal responses, and growth regulation. Generally, responses observed during acclimation were reversed within one week of deacclimation. The primary differences between the two winter B. napus varieties with differential deacclimation responses involved protection from oxidative stress and the ability to maintain photosynthesis.

The design modification of advanced ventricular assist device to enhance pulse augmentation and regurgitant flow shut-off.

The new Advanced ventricular assist device (Advanced VAD) has many features such as improving pulsatility and preventing regurgitant flow during pump stoppage. The purpose of this study was to evaluate the effects of design modifications of the Advanced VAD on these features in vitro. Bench testing of four versions of the Advanced VAD was performed on a static or pulsatile mock loop with a pneumatic device. After pump performance was evaluated, each pump was run at 3000 rpm to evaluate pulse augmentation, then was stopped to assess regurgitant flow through the pump. There was no significant difference in pump performance between the pump models. The average pulse pressure in the pulsatile mock loop was 23.0, 34.0, 39.3, 33.8, and 37.3 mm Hg without pump, with AV010, AV020 3S, AV020 6S, and AV020 RC, respectively. The pulse augmentation factor was 48%, 71%, 47%, and 62% with AV010, AV020 3S, AV020 6S, and AV020 RC, respectively. In the pump stop test, regurgitant flow was -0.60 ± 0.70, -0.13 ± 0.57, -0.14 ± 0.09, and -0.18 ± 0.06 L/min in AV010, AV020 3S, AV020 6S, and AV020 RC, respectively. In conclusion, by modifying the design of the Advanced VAD, we successfully showed the improved pulsatility augmentation and regurgitant flow shut-off features.

Continuous-flow total artificial heart: hemodynamic and pump-related changes associated with posture in a chronic calf model.

This study aimed to evaluate the effects of posture (sitting [lying down]/standing) on hemodynamic and pump-related parameters in calves implanted with our institution's continuous-flow total artificial heart (CFTAH). These parameters were analyzed with posture information in four calves that had achieved the intended 14-, 30-, or 90-day durations of implantation. In each animal, postoperative hourly data gathered throughout the study were used to compare average values with the animal sitting vs. standing. Pump flow became significantly higher in the standing than sitting position at the same pump speed (standing 7.9 ± 0.8, sitting 7.4 ± 1.0 L/min, p = 0.028). Systemic vascular resistance (SVR) and aortic pressure (AoP) were significantly lower in the standing than sitting position (SVR standing 779 ± 145, sitting 929 ± 206 dyne s/cm5, p = 0.027; AoP standing 93 ± 7, sitting 103 ± 7 mm Hg, p < 0.001). No substantial change occurred in pulmonary vascular resistance (PVR) or pulmonary arterial pressure (PAP) with posture (PVR standing 161 ± 39, sitting 164 ± 48 dyne s/cm5, p = 0.639; PAP standing 32 ± 3, sitting 33 ± 4 mm Hg, p = 0.340). Posture affected some hemodynamic and pump-related parameters in calves with CFTAH, with implications for patients with implanted pumps.

Use of a Mechanical Circulatory Support Simulation to Study Pump Interactions With the Variable Hemodynamic Environment.

The Virtual Mock Loop, a versatile virtual mock circulation loop, was developed using a lumped-parameter model of the mechanically assisted human circulatory system. Inputs allow specification of a variety of continuous-flow pumps (left, right, or biventricular assist devices) and a total artificial heart that can self-regulate between left and right pump outputs. Hemodynamic inputs were simplified using a disease-based input panel, allowing selection of a combination of cardiovascular disease states, including systolic and diastolic heart failure, stenosis, and/or regurgitation in each of the four valves, and high to low systemic and pulmonary vascular resistance values. The menu-driven output includes a summary of hemodynamic parameters and graphical output of selected flows, pressures, and volumes in the heart's four chambers as well as in the pulmonary artery and aorta. New tools to augment experimental research on implantable heart-assist devices and to increase our understanding of patient-specific pump interactions are in high demand. The purpose of this ongoing study is to demonstrate the use of a system analysis computer simulation to explore and better comprehend the interactions of mechanical circulatory support pumps with a more extensive combination of patient-specific or simulation conditions than can be established by practical experimentation. Usability is an important factor in constructing computer models for research purposes, and among our primary objectives in creating this simulation model were to make it as portable and useful as possible outside the lab environment, by people not involved in the creation of its operational software.

Anatomical study of the Cleveland Clinic continuous-flow total artificial heart in adult and pediatric configurations.

The purpose of this study was to assess the smallest possible body sizes of patients in whom the Cleveland Clinic continuous-flow total artificial heart for adult (CFTAH) and pediatric configurations (P-CFTAH) can fit. One of the most critical dimensions is the vertebra-to-sternum distance at the junction of the right atrium to the inferior vena cava (V-S distance). Our previous CFTAH anatomical fitting study suggested that the CFTAH would fit patients of V-S distance ≥ 7.5 cm and the P-CFTAH of V-S distance ≥ 5.25 cm (70% of 7.5 cm). To confirm this, we assessed the relationship between body surface area (BSA) and V-S distance in 15 adult patients (BSA 1.86-2.62 m2) and 31 pediatric patients (BSA 0.17-1.80 m2) whose computed tomography scans were available. We found a highly significant correlation between BSA and V-S distance (p < 1.0 × 10-25). It appears that the CFTAH will fit in most patients with BSA ≥ 1.0 m2 (corresponding height of ≥ 130 cm and age of 9 years) and the P-CFTAH in patients with BSA ≥ 0.3 m2 (corresponding height of ≥ 55 cm and age of 1 month). Further anatomical fitting studies are needed to evaluate the two pump models inside human chests to determine the smallest patient size/critical dimensions and device port configurations.

Comparison of phytohormone levels and transcript profiles during seasonal dormancy transitions in underground adventitious buds of leafy spurge.

Leafy spurge (Euphorbia esula L.) is an herbaceous perennial weed that maintains its perennial growth habit through generation of underground adventitious buds (UABs) on the crown and lateral roots. These UABs undergo seasonal phases of dormancy under natural conditions, namely para-, endo-, and ecodormancy in summer, fall, and winter, respectively. These dormancy phases can also be induced in growth chambers by manipulating photoperiod and temperature. In this study, UABs induced into the three phases of dormancy under controlled conditions were used to compare changes in phytohormone and transcriptome profiles. Results indicated that relatively high levels of ABA, the ABA metabolite PA, and IAA were found in paradormant buds. When UABs transitioned from para- to endodormancy, ABA and PA levels decreased, whereas IAA levels were maintained. Additionally, transcript profiles associated with regulation of soluble sugars and ethylene activities were also increased during para- to endodormancy transition, which may play some role in maintaining endodormancy status. When crown buds transitioned from endo- to ecodormancy, the ABA metabolites PA and DPA decreased significantly along with the down-regulation of ABA biosynthesis genes, ABA2 and NCED3. IAA levels were also significantly lower in ecodormant buds than that of endodormant buds. We hypothesize that extended cold treatment may trigger physiological stress in endodormant buds, and that these stress-associated signals induced the endo- to ecodormancy transition and growth competence. The up-regulation of NAD/NADH phosphorylation and dephosphorylation pathway, and MAF3-like and GRFs genes, may be considered as markers of growth competency.

Mechanism of Self-Regulation and In Vivo Performance of the Cleveland Clinic Continuous-Flow Total Artificial Heart.

Cleveland Clinic's continuous-flow total artificial heart (CFTAH) provides systemic and pulmonary circulations using one assembly (one motor, two impellers). The right pump hydraulic output to the pulmonary circulation is self-regulated by the rotating assembly's passive axial movement in response to atrial differential pressure to balance itself to the left pump output. This combination of features integrates a biocompatible, pressure-balancing regulator with a double-ended pump. The CFTAH requires no flow or pressure sensors. The only control parameter is pump speed, modulated at programmable rates (60-120 beats/min) and amplitudes (0 to ±25%) to provide flow pulses. In bench studies, passive self-regulation (range: -5 mm Hg ≤ [left atrial pressure - right atrial pressure] ≤ 10 mm Hg) was demonstrated over a systemic/vascular resistance ratio range of 2.0-20 and a flow range of 3-9 L/min. Performance of the most recent pump configuration was demonstrated in chronic studies, including three consecutive long-term experiments (30, 90, and 90 days). These experiments were performed at a constant postoperative mean speed with a ±15% speed modulation, demonstrating a totally self-regulating mode of operation, from 3 days after implant to explant, despite a weight gain of up to 40%. The mechanism of self-regulation functioned properly, continuously throughout the chronic in vivo experiments, demonstrating the performance goals.

Thrombotic Depositions on Right Impeller of Double-Ended Centrifugal Total Artificial Heart In Vivo.

The development of total artificial heart devices is a complex undertaking that includes chronic biocompatibility assessment of the device. It is considered particularly important to assess whether device design and features can be compatible long term in a biological environment. As part of the development program for the Cleveland Clinic continuous-flow total artificial heart (CFTAH), we evaluated the device for signs of thrombosis and biological material deposition in four animals that had achieved the intended 14-, 30-, or 90-day durations in each respective experiment. Explanted CFTAHs were analyzed for possible clot buildup at "susceptible" areas inside the pump, particularly the right pump impeller. Depositions of various consistency and shapes were observed. We here report our findings, along with macroscopic and microscopic analysis post explant, and provide computational fluid dynamics data with its potential implications for thrombus formation.