RESUMEN
Spin structure of a magnetic system results from the competition of various exchange couplings. Pressure-driven spin structure evolution, through altering interatomic distance, and hence, electronic structure produces baromagnetic effect (BME), which has potential applications in sensor/actuator field. Here, we report a new spin structure(CyS-AFMb) with antiferromagnetic(AFM) nature in Fe-doped Mn0.87Fe0.13NiGe. Neutron powder diffraction (NPD) under in situ hydrostatic pressure and magnetic field was conducted to reveal the spin configuration and its instabilities. We discovered that a pressure higher than 4 kbar can induce abnormal change of Mn(Fe)-Mn(Fe) distances and transform the CyS-AFMb into a conical spiral ferromagnetic(FM) configuration(45°-CoS-FMa) with easily magnetized but shortened magnetic moment by as much as 22%. The observed BME far exceeds previous reports. Our first-principles calculations provide theoretical supports for the enhanced BME. The compressed lattice by pressure favors the 45°-CoS-FMa and significantly broadened 3d bandwidth of Mn(Fe) atoms, which leads to the shortened magnetic moment and evolution of spin structure.
RESUMEN
Super Invar (SIV), i.e., zero thermal expansion of metallic materials underpinned by magnetic ordering, is of great practical merit for a wide range of high precision engineering. However, the relatively narrow temperature window of SIV in most materials restricts its potential applications in many critical fields. Here, we demonstrate the controlled design of thermal expansion in a family of R_{2}(Fe,Co)_{17} materials (R=rare Earth). We find that adjusting the Fe-Co content tunes the thermal expansion behavior and its optimization leads to a record-wide SIV with good cyclic stability from 3-461 K, almost twice the range of currently known SIV. In situ neutron diffraction, Mössbauer spectra and first-principles calculations reveal the 3d bonding state transition of the Fe-sublattice favors extra lattice stress upon magnetic ordering. On the other hand, Co content induces a dramatic enhancement of the internal molecular field, which can be manipulated to achieve "ultrawide" SIV over broad temperature, composition and magnetic field windows. These findings pave the way for exploiting thermal-expansion-control engineering and related functional materials.
RESUMEN
It is known that few Co-based superconducting compounds have been found compared with their Fe- or Ni-based counterparts. In this study, we have found superconductivity of 4 K in the LaCoSi compound for the first time. The combined analysis of neutron and synchrotron X-ray powder diffractions reveals that LaCoSi exhibits an isostructure with the known Fe-based LiFeAs superconductor, which is the first "111" Co-based superconductor. First-principles calculation shows that LaCoSi presents a quasi-two-dimensional band structure that is also similar to that of LiFeAs. The small structural distortion may be more conducive to the emergence of superconductivity in the LaCoSi compound, which provides a direction for finding new Co-based superconducting compounds.
RESUMEN
It is known that as the FeAs4 tetrahedron in the Fe-based superconductor is close to the regular tetrahedron, critical temperature (Tc) can be greatly increased. Recently, a Co-based superconductor of LaCoSi (4 K) with "111" structure was found. In this work, we improve the Tc of LaCoSi through structural regulation. Tc can be increased by the chemical substitution of Co by Fe, while the superconductivity is suppressed by the Ni substitution. The combined analysis of neutron and synchrotron X-ray powder diffractions reveals that the change of the Si-Co-Si bond angles of the CoSi4 tetrahedron is possibly responsible for the determination of superconducting properties. The Fe chemical substitution is favorable for the formation of the regular tetrahedron of CoSi4. The present new Co-based superconductor of LaCoSi provides a possible method to enhance the superconductivity performance of the Co-based superconductors via controlling Co-based tetrahedra similar to those well established in the Fe-based superconductors.
RESUMEN
Negative thermal expansion (NTE) behaviors have been observed in various types of compounds. The achievement in the merits of promising low-cost and facile NTE oxides remains challenging. In the present work, a simple and low-cost Cu2P2O7 has been found to exhibit the strongest NTE among the oxides (αV â¼ -27.69 × 10-6 K-1, 5-375 K). The complex NTE mechanism has been investigated by the combined methods of high-resolution synchrotron X-ray diffraction, neutron powder diffraction, X-ray pair distribution function, extended X-ray absorption fine structure spectroscopy, and density functional theory calculations. Interesting, the direct experimental evidence reveals that the coupling twist and rotation of PO4 and CuO5 polyhedra are the inherent factors for the NTE nature of Cu2P2O7, which is triggered by the transverse vibrations of oxygen atoms. The present new NTE material of Cu2P2O7 also has been verified for the practical application.
RESUMEN
To discover the nonlinear optical (NLO) materials with strong second harmonic generation (SHG), the design of NLO-active molecular units with large polarization is considered as a common strategy. Herein, we propose that the local structural distortion induced with vacancies, apart from the NLO-active units, can be employed to improve the NLO effect in solids as well. Accordingly, a new tungsten bronze (TB) oxide, Pb2(Pb0.15Li0.7â¡0.15)Nb5O15 (â¡ representing vacancies), is successfully designed and prepared, which exhibits a strong SHG response of 39 times that of KH2PO4. The detailed analysis reveals that the local structural distortions enhanced by the vacancies in PLN strengthen the local dipole moments of neighboring NbO6 octahedra, and thus significantly prompt the SHG effect. Moreover, a series of new TB compounds with large NLO effects are discovered by this molecular design strategy, which are perspectives for new NLO materials synthesis.
RESUMEN
Understanding the role of guest molecules in the lattice void of open-framework structures is vital for tailoring thermal expansion. Here, we take a new negative thermal expansion (NTE) compound, TiCo(CN)6, as a case study from the local structure perspective to investigate the effect of H2O molecules on thermal expansion. The in situ synchrotron X-ray diffraction results showed that the as-prepared TiCo(CN)6·2H2O has near-zero thermal expansion behavior (100-300 K), while TiCo(CN)6 without water in the lattice void exhibits a linear NTE (αl = -4.05 × 10-6 K-1, 100-475 K). Combined with the results of extended X-ray absorption fine structure, it was found that the intercalation of H2O molecules has the clear effect of inhibiting transverse thermal vibrations of Ti-N bonds, while the effect on the Co-C bonds is negligible. The present work displays the inhibition mechanism of H2O molecules on thermal expansion of TiCo(CN)6, which also provides insight into the thermal expansion control of other NTE compounds with open-framework structures.
RESUMEN
The pairing of ions of opposite charge is a central principle of chemistry. Even though the ability to intercalate anions is desirable for many applications, it remains a key challenge for numerous host materials with their outmost layers beingn anions. In this work, we introduce a hydrothermal ion-exchange synthesis to intercalate oxidative S and Se anions between the Se layers of FeSe, which leads to single crystals of novel compounds (Se/S)x(NH3)yFe2Se2. In particular, the unusual anion-anion bonding between the intercalated S (or Se) and Se layers exhibits strong ionic characteristics. The charge transfer through the Se layer to S (or Se) intercalants is further confirmed by the elevated oxidation state of Fe ions and the dominant hole carriers in the intercalated compounds. By intercalating S, for the first time superconductivity emerged in hole-doped iron chalcogenides. The generality of this chemical approach was further demonstrated with layered FeS and NiSe. Our findings thus open an avenue to exploring diverse aspects of anionic intercalation in similar materials.
RESUMEN
Topotactic reduction of the perovskite oxide TbBaCo2O5.5 with CaH2 leads to a new crystalline phase TbBaCo2O4.5, adopting a 2 × 2 × 1 superstructure compared to TbBaCo2O5.5. The structure consists of a corner-shared network of square pyramidal CoO5 and trigonal planar CoO3 units. Magnetic susceptibility and variable temperature neutron diffraction data reveal that TbBaCo2O4.5 adopts a G-type antiferromagnetically ordered structure (TN â¼ 322 K). The ordered moments are consistent with the presence of low-spin Co2+ (S = 1/2) in trigonal-planar coordination and high-spin Co2+ centers in square pyramidal coordination. TbBaCo2O4.5 shows lower conductivity than TbBaCo2O5.5, which is consistent with the p-type conduction behavior. The unique anion vacancy arrangements in TbBaCo2O4.5 further complement the role of A-cations in controlling the oxygen vacancy distribution in LnBaCo2O5+δ series and demonstrate more opportunity to tune the structural and physical properties based on cationic and anionic lattice coupling.
RESUMEN
We report the synthesis and characterizations of a new FeSe-based compound CsFe4-δSe4, which is closely related to alkali intercalated FeSe superconductors while exhibits distinct features. It does not undergo phase separation and antiferromagnetic transition. Powder neutron diffractions, electron microscopy and high-angle annular-dark-field images confirm that CsFe4-δSe4 possesses an ordered Cs arrangement as â2 × â2 superstructure, evidencing a B-centered orthorhombic lattice with a space group of Bmmm. The temperature-dependent powder neutron diffractions indicate no structural and magnetic transition from 320 to 5 K. In contrast to the symmetry-breaking in FeSe, this phase naturally possesses the orthorhombic symmetry even at room temperature. DFT calculations and transport measurements reveal a novel Fermi surface geometry with two electron-like sheets centered on Γ point and intermediate density of states at the Fermi level comparing with the value of FeSe and the superconducting A xFe2Se2.
RESUMEN
The "114" oxides LnBa(Co/Fe)4O7+δ represent a new family of materials that exhibits intriguing physical properties, including geometrically frustrated magnetism, oxygen storage, and magnetoelectric couplings. Various chemical substitutions have been conducted to modify their crystal and magnetic structures as well as physical properties. However, the principles beneath the substitution-induced structural evolution and charge/cationic ordering have not yet been understood. Thus, in this contribution, two complete solid solutions of MAZn2Ga2O7 ( M = Ca2+, Sr2+; A = Sr2+, Ba2+) were designed, synthesized, and characterized by Rietveld refinements based on high-resolution X-ray diffraction (XRD) and neutron diffraction (ND) data. The structure symmetry of MAZn2Ga2O7 is determined by the cationic size mismatch between M and A cations that can be defined by the tolerance factor t, i.e., symmetry transitions from P63 mc ( t > 0.87) to P31 c (0.87 > t > 0.75) and to Pna21 ( t < 0.75) were observed for MAZn2Ga2O7, associated with the rotation of T1O4 tetrahedra in the triangular layers. The Zn2+/Ga3+ ordering at T sites is also a consequence of the increase or decrease of the average sizes of M and A cations. A small concentration of interstitial oxygen ions can be obtained in Sr2Zn2- xGa2+ xO7+ x/2 ( x = 0.1, 0.2); however, no oxygen ionic conduction was observed at high temperatures, indicating the migration ability of the interstitial oxygen was very limited.
RESUMEN
The understanding of the negative thermal expansion (NTE) mechanism is vital not only for the development of new NTE compounds but also for effectively controlling thermal expansion. Here, we report an interesting isotropic NTE property in cubic GaFe(CN)6 Prussian blue analogues (α l = -3.95 × 10-6 K-1, 100-475 K), which is a new example to understand the complex NTE mechanism. A combined study of synchrotron X-ray diffraction, X-ray total scattering, X-ray absorption fine structure, neutron powder diffraction, and density functional theory calculations shows that the NTE of GaFe(CN)6 originates from the low-frequency phonons (< â¼100 cm-1), which are directly related to the transverse vibrations of the atomic -Ga-N≡C-Fe- chains. Both the Ga-N and Fe-C chemical bonds are much softer to bend than to stretch. The direct evidence that transverse vibrational contribution to the NTE of GaFe(CN)6 is dominated by N, instead of C atoms, is illustrated. It is interesting to find that the polyhedra of GaFe(CN)6 are not rigid, which is a starting assumption in some models describing the NTE properties of other systems. The NTE mechanism can be vividly described by the "guitar-string" effect, which would be the common feature for the NTE property of many open-framework functional materials, such as Prussian blue analogues, oxides, cyanides, metal-organic frameworks, and zeolites.
RESUMEN
A new layered oxyselenide, Ba2CuO2Cu2Se2, was synthesized under high-pressure and high-temperature conditions and was characterized via structural, magnetic, and transport measurements. It crystallizes into space group I4/ mmm and consists of a square lattice of [CuO2] planes and antifluorite-type [Cu2Se2] layers, which are alternately stacked along the c axis. The lattice parameters are obtained as a = b = 4.0885 Å and c = 19.6887 Å. The Cu-O bond length is given by half of the lattice constant a, i.e., 2.0443 Å. Ba2CuO2Cu2Se2 is a semiconductor with a resistivity of â¼18 mΩ·cm at room temperature. No magnetic transition was found in the measured temperature range, and the Curie-Weiss temperature was obtained as -0.2 K, suggesting a very weak exchange interaction. The DFT+ Ueff calculation demonstrates that the band gap is about 0.2 eV for the supposed antiferromagnetic order, and the density of state near the top of the valence band is mainly contributed from the Se 4p electrons.
RESUMEN
Pressure has an essential role in the production and control of superconductivity in iron-based superconductors. Substitution of a large cation by a smaller rare-earth ion to simulate the pressure effect has raised the superconducting transition temperature T(c) to a record high of 55 K in these materials. In the same way as T(c) exhibits a bell-shaped curve of dependence on chemical doping, pressure-tuned T(c) typically drops monotonically after passing the optimal pressure. Here we report that in the superconducting iron chalcogenides, a second superconducting phase suddenly re-emerges above 11.5 GPa, after the T(c) drops from the first maximum of 32 K at 1 GPa. The T(c) of the re-emerging superconducting phase is considerably higher than the first maximum, reaching 48.0-48.7 K for Tl(0.6)Rb(0.4)Fe(1.67)Se(2), K(0.8)Fe(1.7)Se(2) and K(0.8)Fe(1.78)Se(2).
RESUMEN
Olivine-structured LiMn1-xFexPO4 has become a promising candidate for cathode materials owing to its higher working voltage of 4.1 V and thus larger energy density than that of LiFePO4, which has been used for electric vehicles batteries with the advantage of high safety but disadvantage of low energy density due to its lower working voltage of 3.4 V. One drawback of LiMn1-xFexPO4 electrode is its relatively low electronic and Li-ionic conductivity with Li-ion one-dimensional diffusion. Herein, olivine-structured α-LiMn0.5Fe0.5PO4 nanocrystals were synthesized with optimized Li-ion diffusion channels in LiMn1-xFexPO4 nanocrystals by inducing high concentrations of Fe2+-Li+ antisite defects, which showed impressive capacity improvements of approaching 162, 127, 73, and 55 mAh g-1 at 0.1, 10, 50, and 100 C, respectively, and a long-term cycling stability of maintaining about 74% capacity after 1000 cycles at 10 C. By using high-resolution transmission electron microscopy imaging and joint refinement of hard X-ray and neutron powder diffraction patterns, we revealed that the extraordinary high-rate performance could be achieved by suppressing the formation of electrochemically inactive phase (ß-LiMn1-xFexPO4, which is first reported in this work) embedded in α-LiMn0.5Fe0.5PO4. Because of the coherent orientation relationship between ß- and α-phases, the ß-phase embedded would impede the Li+ diffusion along the [100] and/or [001] directions that was activated by the high density of Fe2+-Li+ antisite (4.24%) in α-phase. Thus, by optimizing concentrations of Fe2+-Li+ antisite defects and suppressing ß-phase-embedded olivine structure, Li-ion diffusion properties in LiMn1-xFexPO4 nanocrystals can be tuned by generating new Li+ tunneling. These findings may provide insights into the design and generation of other advanced electrode materials with improved rate performance.
RESUMEN
Decreasing Li/Ni disorder has been a challenging problem for layered oxide materials, where disorder seriously restricts their electrochemical performances for lithium-ion batteries (LIBs). Element doping is a great strategy that has been widely used to stabilize the structure of the cathode material of an LIB and improve its electrochemical performance. On the basis of the results of previous studies, we hypothesized that the element of Ca, which has a lower valence state and larger radius compared to Ni2+, would be an ideal doping element to decrease the Li/Ni disorder of LiMO2 materials and enhance their electrochemical performances. A Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material was selected as the bare material, which usually shows severe Li/Ni disorder and serious capacity attenuation at a high cutoff voltage. So, a series of Ca-doped LiNi0.8(1-x)Co0.1Mn0.1Ca0.8xO2 (x = 0-8%) samples were synthesized by a traditional solid-state method. As hypothesized, neutron diffraction showed that Ca-doped LiNi0.8Co0.1Mn0.1O2 possessed a lower degree of Li/Ni disorder, and potentiostatic intermittent titration results showed a faster diffusion coefficient of Li+ compared with that of LiNi0.8Mn0.1Co0.1O2. The Ca-doped LiNi0.8Mn0.1Co0.1O2 samples exhibited higher discharge capacities and better cycle stabilities and rate capabilities, especially under a high cutoff voltage with 4.5 V. In addition, the problems of polarization and voltage reduction of LiNi0.8Mn0.1Co0.1O2 were also alleviated by doping with Ca. More importantly, we infer that it is crucial to choose an appropriate doping element and our findings will help in the research of other layered oxide materials.
RESUMEN
The control of thermal expansion of solid compounds is intriguing but remains challenging. The effect of guests on the thermal expansion of open-framework structures was investigated. Notably, the presence of guest ions (K+ ) and molecules (H2 O) can substantially switch thermal expansion of YFe(CN)6 from negative (αv =-33.67×10-6 â K-1 ) to positive (αv =+42.72×10-6 â K-1 )-a range that covers the thermal expansion of most inorganic compounds. The mechanism of such substantial thermal expansion switching is revealed by joint studies with synchrotron X-ray diffraction, X-ray absorption fine structure, neutron powder diffraction, and density functional theory calculations. The presence of guest ions or molecules plays a critical damping effect on transverse vibrations, thus inhibiting negative thermal expansion. An effective method is demonstrated to control the thermal expansion in open-framework materials by adjusting the presence of guests.
RESUMEN
The incorporation of transition metal element Ag was performed to explore negative thermal expansion (NTE) materials with tetragonal tungsten bronze (TTB) structures. In this study, the structure and thermal expansion behaviors of a polar TTB oxide, Pb2AgNb5O15 (PAN), were systematically investigated by high-resolution synchrotron powder diffraction, high-resolution neutron powder diffraction, transmission electron microscope (TEM), and high-temperature X-ray diffractions. The TEM and Rietveld refinements revealed that the compound PAN displays (â2a(TTB), â2b(TTB), 2c(TTB))-type superstructure. This superstructure within the a-b plane is caused by the ordering of A-site cations, while the doubling of the c axis is mainly induced by a slight tilt distortion of the NbO6 octahedra. The transition metal Ag has larger spontaneous polarization displacements than Pb, but the Pb-O covalence seems to be weakened compared to the potassium counterpart Pb2KNb5O15 (PKN), which may account for the similar Curie temperature and uniaxial NTE behavior for PAN and PKN. Powder second harmonic generation (SHG) measurement indicates that PAN displays a moderate SHG response of â¼0.2 × LiNbO3 (or â¼100 × α-SiO2) under 1064 nm laser radiation. The magnitudes of the local dipole moments in NbO6 and PbOx polyhedra were quantified using bond-valence approach. We show that the SHG response stems from the superposition of dipole moments of both the PbO(x) and NbO6 polyhedra.
RESUMEN
MnCoGe-based compounds undergo a giant negative thermal expansion (NTE) during the martensitic structural transition from Ni2In-type hexagonal to TiNiSi-type orthorhombic structure. High-resolution neutron diffraction experiments revealed that the expansion of unit cell volume can be as large as ΔV/V â¼ 3.9%. The optimized compositions with concurrent magnetic and structural transitions have been studied for magnetocaloric effect. However, these materials have not been considered as NTE materials partially due to the limited temperature window of phase transition. The as-prepared MnCoGe-based compounds are quite brittle and naturally collapse into powders. By using a few percents (3-4%) of epoxy to bond the powders, we introduced residual stress in the bonded samples and thus realized the broadening of structural transition by utilizing the specific characteristics of lattice softening enforced by the stress. As a result, giant NTE (not only the linear NTE coefficient α but also the operation-temperature window) has been achieved. For example, the average αÌ as much as -51.5 × 10(-6)/K with an operating temperature window as wide as 210 K from 122 to 332 K has been observed in a bonded MnCo0.98Cr0.02Ge compound. Moreover, in the region between 250 and 305 K near room temperature, the α value (-119 × 10(-6)/K) remains nearly independent of temperature. Such an excellent performance exceeds that of most other materials reported previously, suggesting it can potentially be used as a NTE material, particularly for compensating the materials with large positive thermal expansions.
RESUMEN
Low-temperature vaterite-type LuBO(3) (π-LBO) was prepared by a solid-state reaction method at high temperature. The reasoning of the existence of vacancy-stabilized π-LBO was investigated for the first time using neutron diffraction patterns, Fourier transform infrared (FT-IR) spectra, and high-resolution transmission electron microscopy. The results clearly demonstrated that the B and O vacancies in π-LBO came into being during the heating process. The existence of an open B(3)O(9) ring consisting of BO(3) and BO(4) units in π-LBO due to the B and O vacancies was demonstrated by FT-IR. The vacuum ultraviolet-ultraviolet spectroscopic properties of π-LBO were studied in detail. In addition, the luminescence mechanism of Ce(3+) in π-LBO was put forward and discussed with that of calcite-type LuBO(3) (ß-LBO).