A Retrospective Study to Compare Patient Outcomes from Standard Total Knee Arthroplasty (TKA) versus Navigation-Guided Arthroplasty Using the Brainlab Software-Guided Surgical System at a Center in Hebei Province January 2021 to July 2023.

BACKGROUND This retrospective study aimed to compare patient outcomes from standard total knee arthroplasty (TKA) vs navigation-guided arthroplasty using the Brainlab software-guided surgical system at Cangzhou Hospital of Integrated TCM-WM, Hebei, Hebei Province, China from January 2021 to July 2023. MATERIAL AND METHODS A total of 239 patients who underwent total knee arthroplasty in Cangzhou Hospital of Integrated TCM-WM, Hebei from January 2021 to July 2023 were retrospectively analyzed. According to the inclusion criteria, 212 eligible patients were selected for analysis and divided into a Navigation Group (NG) (n=105) and a Traditional Group (TG) (n=107) according to surgical method used. Outcomes measured included duration of disease, operative time, intraoperative blood loss volume, postoperative length of hospital stay, and pain measured by the hospital for special surgery knee score (HSS), Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and forgotten joint score (FJS). RESULTS The comparison of perioperative results between the 2 groups showed that the incision length in the NG was significantly longer than that in the TG (P<0.001, 95% Cl 2.59-3.35). At 3 months after surgery, the HSS score of the NG was statistically higher than that of the TG (P=0.002, 95% Cl 3.42-4.46); the WOMAC score of the NG was lower than that of the TG (P<0.001, 95% Cl -4.41-2.87); and the FJS score of the NG was significantly higher than that of the TG (P=0.003, 95% Cl 2.39-3.67). CONCLUSIONS Compared with conventional TKA, use of the Brainlab navigation system is associated with a longer incision, more accurate implantation position of the prosthesis, faster recovery of knee joint function, and helps patients to "forget" about their knee prosthesis in the short term.

Prevalence and Spectrum of TBX5 Mutation in Patients with Lone Atrial Fibrillation.

Atrial fibrillation (AF), the most common type of cardiac rhythm disturbance encountered in clinical practice, is associated with substantially increased morbidity and mortality. Aggregating evidence demonstrates that abnormal cardiovascular development is involved in the pathogenesis of AF. A recent study has revealed that the TBX5 gene, which encodes a T-box transcription factor key to cardiovascular development, was associated with AF and atypical Holt-Oram syndrome. However, the prevalence and spectrum of TBX5 mutation in patients with lone AF remain unclear. In this study, the coding regions and splicing junction sites of TBX5 were sequenced in 192 unrelated patients with lone AF and 300 unrelated ethnically-matched healthy individuals used as controls. The causative potential of the identified TBX5 variation was evaluated by MutationTaster and PolyPhen-2. The functional effect of the mutant TBX5 was assayed by using a dual-luciferase reporter assay system. As a result, a novel heterozygous TBX5 mutation, p.H170D, was identified in a patient, with a mutational prevalence of approximately 0.52%. This mutation, which was absent in the 300 control individuals, altered the amino acid completely conserved evolutionarily across species, and was predicted to be disease-causing. Functional deciphers showed that the mutant TBX5 was associated with significantly reduced transcriptional activity when compared with its wild-type counterpart. Furthermore, the mutation significantly decreased the synergistic activation between TBX5 and NKX2-5 or GATA4. The findings expand the mutational spectrum of TBX5 linked to AF and provide new evidence that dysfunctional TBX5 may contribute to lone AF.

[Prediction of liberation cutting intensity effect on the growth of Korean pine in secondary forest based on double dummy variable model]. / åŸºäºŽåŒå“‘å˜é‡æ¨¡åž‹é¢„æµ‹é€å ‰æŠšè‚²å¼ºåº¦å¯¹æ¬¡ç”Ÿæž—å† çº¢æ¾ç”Ÿé•¿çš„å½±å“.

"Planting conifer and reserving broadleaved tree" is an effective way to restore broad-leaved pine forest of temperate zone in Northeast China. Liberation cutting can promote the growth of Korean pine (Pinus koraiensis) under forest crown and accelerate the succession. However, how liberation cutting intensity affects the growth of Korean pine in secondary forest is still unclear. Taking the "Planting conifer and reserving broadleaved tree" Korean pine forest in Changbai Mountain as the object, we constructed a growth model of diameter at breast height (DBH) and tree height of Korean pine with double dummy variables (liberation cutting intensity and tree classification) to predict the growth of Korean pine plantation under different liberation cutting intensities, i.e. control (no liberation cutting), light-intensity liberation cutting (retaining upper canopy closure 0.6), medium-intensity liberation cutting (0.4), heavy-intensity liberation cutting (0.2) and clear cutting (cutting all upper broadleaf trees) stands. We analyzed the effects of liberation cutting intensities on DBH, tree height, and the ratio of tree height to DBH. The results showed that among six theoretical growth equations, the Gompertz model on the DBH (R2=0.46) and tree height (R2=0.81) was optimal basic model. The R2 of the DBH model was increased to 0.65 and 0.89, respectively, after the single dummy variable and the double dummy variable were introduced into the basic model, while the R2 of the tree height model was increased to 0.84 and 0.94. Therefore, the double dummy variable model was the most suitable for predicting the growth of Korean pine. The growth of DBH of pressed tree increased with the increases of liberation cutting intensity (increase by 145.8%-933.3%) during the whole simulation period (0-80 a). Average and dominant trees showed the same pattern at 42 and 60 a. In the early and middle stages of liberation cutting (20 and 42 a), clear cutting and heavy-intensity liberation cutting had similar effects on the height growth of dominant trees (64.8%-68.5%), average trees (100.0%-144.2%), and pressed trees (138.5%-183.9%). The effects of medium-intensity liberation cutting and light-intensity liberation cutting on the height growth were similar (24.3%-35.1%, 56.0%-92.3%, 84.6%-103.2%). While in the middle and late period (42 and 80 a), height growth of three grade trees increased with the increases of liberation cutting intensity. Under each liberation cutting intensity, the ratio of height to DBH of the dominant, average, and pressed trees increased successively, ranging from 0.50-0.95, 0.64-1.23, and 0.73-4.33, respectively. Only the pressed tree decreased with the increases of liberation cutting intensity at 0-80 a. Therefore, about 40 years after the implementation of liberation cutting, the promoting effect of different liberation cutting intensities on DBH growth was significantly weakened, the promoting effect on tree height growth was significantly enhanced, and the ratio of tree height to diameter began to increase. In order to alleviate forest competition, second liberation cutting should be carried out for light-intensity liberation cutting and medium-intensity liberation cutting stands to further release the growth potential of Korean pine, and thinning management should be carried out in clear cutting and heavy-intensity liberation cutting stands.

Rapid simultaneous quantification of zearalenone and fumonisin B1 in corn and wheat by lateral flow dual immunoassay.

A lateral flow dual immunoassay (LFDIA) was developed for rapid quantitative detection of zearalenone (ZEN) and fumonisin B1 (FB1) in corn and wheat samples on a single test strip. Two test lines and the control line on the nitrocellulose membrane were coated with ZEN and FB1 conjugates and goat anti-mouse IgG, respectively. Colloidal gold nanoparticles were conjugated with monoclonal antibodies against ZEN or FB1. The intensity of the test lines was analyzed by a photometric strip reader to determine the concentrations of ZEN and FB1 based on the calibration curves of known concentrations versus intensity readings. Test parameters such as types of buffers, ratio of the two gold-labeled antibodies, and dilution of the sample extracts and the gold-labeled antibodies were optimized. The detection limit was 0.35 and 5.23 ng/mL for ZEN and FB1, respectively, and the corresponding detection ranges were 0.94-7.52 and 9.34-100.45 ng/mL, respectively. Spiked and natural samples were analyzed using both LFDIA and liquid chromatography-tandem mass spectrometry. The two methods had a good correlation (R(2) = 0.96). The dual quantitative LFDIA is sensitive, rapid, and easy-to-use for on-site testing of a large number of samples.

Novel chemiluminescence immunoassay for the determination of zearalenone in food samples using gold nanoparticles labeled with streptavidin-horseradish peroxidase.

A novel highly sensitive chemiluminescence immunoassay (CLIA) was developed to detect zearalenone in food samples by using both biotinylated zearalenone conjugates and gold (Au) nanoparticles labeled with streptavidin-horseradish peroxidase for signal amplification. Biotinylated zearalenone-ovalbumin conjugates and Au nanoparticles labeled with streptavidin-horseradish peroxidase were synthesized separately. The concentrations of immunoreagents and the reaction times of these immunoreagents were optimized to improve the performances of analytical methods. For the CLIA based on biotinylated zearalenone conjugates and Au nanoparticles labeled with streptavidin-horseradish peroxidase, the limit of detection was 0.008 ng/mL and the IC50 was 0.11 ng/mL. The linear working range was 0.02-0.51 ng/mL. The cross-reactivities with the zearalenone analogues (α-zearalanol, zearalanone, α-zearalenol, ß-zearalanol, and ß-zearalenol) were 32, 17, 12, 0.3, and 0.1%, respectively. The recovery rates in spiked food samples were 97-117%, and the intraday and interday relative standard deviations were both <10%. Parallel analysis of natural food samples showed a good correlation between this novel CLIA and liquid chromatography-tandem mass spectrometry. This method provides a rapid, accurate, and highly sensitive method to determine levels of zearalenone in food samples.

Simultaneous quantitative determination of multiple mycotoxins in cereal and feedstuff samples by a suspension array immunoassay.

Mycotoxins produced by different species of fungi may coexist in single cereal and feedstuff samples, which could become highly toxic for humans and animals. In order to quantify four mycotoxins (zearalenone, fumonisin B1, deoxynivalenol, and aflatoxin B1) in cereal and feedstuff samples simultaneously, a new suspension array immunoassay was developed. Antimycotoxin monoclonal antibodies were conjugated to the surface of different encoding microspheres (19#, 37#, 39#, and 49#), and mycotoxin-protein conjugates were then coupled with biotin. Using streptavidin-phycoerythrin as a signal reporter protein, this direct competition multiple suspension array immunoassay was optimized. The results showed that the detection limits for zearalenone, fumonisin B1, deoxynivalenol, and aflatoxin B1 were 0.51, 6.0, 4.3, and 0.56 ng/mL, respectively, with detection ranges of 0.73-6.8, 11.6-110.3, 8.6-108.1, and 1.1-14.1 ng/mL, respectively. For the detection of the spiked samples, the recovery rates were between 92.3% and 115.5%. This method also shows a good correlation coefficient (r = 0.99, P < 0.01) with liquid chromatography-tandem mass spectrometry in the detection of toxins in commercial cereal and feedstuff samples. This suspension array immunoassay was high-throughput and accurate for the rapid quantitative detection of multiple mycotoxins in commercial cereal and feedstuff samples.