Cross cultural adaptation and psychometric properties of the Finnish version of Western Ontario shoulder instability index (WOSI).

BACKGROUND: Western Ontario shoulder instability index (WOSI) is a widely used disease-specific self-assessment measurement tool for patients with shoulder instability. The main aim of this study was to translate and cross culturally adapt the WOSI into Finnish language and to test its measurement properties. METHODS: WOSI was translated in Finnish and adapted into an electronic user interface. 62 male patients with traumatic anteroinferior shoulder instability, programmed for stabilizing shoulder surgery, answered the questionnaire twice preoperatively (2 and 0 weeks), and twice postoperatively (3 and 12 months). Additional scoring tools, such as satisfaction to treatment outcome, subjective shoulder value (SSV), Oxford shoulder instability index (OSIS) and Constant score (CS), were used as comparators. The reliability, validity and responsiveness of WOSI were investigated through statistical analysis. RESULTS: Preoperative test-retest results were available for 49 patients, and 54 patients were available at final follow up. The mean WOSI was 57.8 (SD 20.3), 70.4 (SD 18.9), and 85.9 (SD 15.5), at baseline, 3, and 12 months, respectively. There was a statistically significant mean improvement of 28.8 (SD 24.5) in WOSI between baseline and 12 months (p < 0.0001). The intraclass correlation coefficient for the preoperative WOSI was excellent 0.91. At 12 months WOSI had an excellent Pearson's correlation coefficient both with SSV (0.69), OSIS (-0.81), and poor with CS (0.25) scores, confirming our a priori hypothesis. There were no detected floor nor ceiling effects for WOSI pre- or postoperatively. The calculated minimal detectable change was 9.2 and the estimated minimal clinically important difference 13.4 to 18.1. CONCLUSION: Finnish version of WOSI is a reliable and valid tool for assessing health state and improvement after operative treatment of shoulder instability in young male patients.

Automating three-dimensional osteoarthritis histopathological grading of human osteochondral tissue using machine learning on contrast-enhanced micro-computed tomography.

OBJECTIVE: To develop and validate a machine learning (ML) approach for automatic three-dimensional (3D) histopathological grading of osteochondral samples imaged with contrast-enhanced micro-computed tomography (CEµCT). DESIGN: A total of 79 osteochondral cores from 24 total knee arthroplasty patients and two asymptomatic donors were imaged using CEµCT with phosphotungstic acid -staining. Volumes-of-interest (VOI) in surface (SZ), deep (DZ) and calcified (CZ) zones were extracted depth-wise and subjected to dimensionally reduced Local Binary Pattern -textural feature analysis. Regularized linear and logistic regression (LR) models were trained zone-wise against the manually assessed semi-quantitative histopathological CEµCT grades (diameter = 2 mm samples). Models were validated using nested leave-one-out cross-validation and an independent test set (4 mm samples). The performance was primarily assessed using Mean Squared Error (MSE) and Average Precision (AP, confidence intervals are given in square brackets). RESULTS: Highest performance on cross-validation was observed for SZ, both on linear regression (MSE = 0.49, 0.69 and 0.71 for SZ, DZ and CZ, respectively) and LR (AP = 0.9 [0.77-0.99], 0.46 [0.28-0.67] and 0.65 [0.41-0.85] for SZ, DZ and CZ, respectively). The test set evaluations yielded increased MSE on all zones. For LR, the performance was also best for the SZ (AP = 0.85 [0.73-0.93], 0.82 [0.70-0.92] and 0.8 [0.67-0.9], for SZ, DZ and CZ, respectively). CONCLUSION: We present the first ML-based automatic 3D histopathological osteoarthritis (OA) grading method which also adequately perform on grading unseen data, especially in SZ. After further development, the method could potentially be applied by OA researchers since the grading software and all source codes are publicly available.

Near-infrared spectroscopy enables quantitative evaluation of human cartilage biomechanical properties during arthroscopy.

OBJECTIVE: To investigate the feasibility of near-infrared (NIR) spectroscopy (NIRS) for evaluation of human articular cartilage biomechanical properties during arthroscopy. DESIGN: A novel arthroscopic NIRS probe designed in our research group was utilized by an experienced orthopedic surgeon to measure NIR spectra from articular cartilage of human cadaver knee joints (ex vivo, n = 18) at several measurement locations during an arthroscopic surgery. Osteochondral samples (n = 265) were extracted from the measurement sites for reference analysis. NIR spectra were remeasured in a controlled laboratory environment (in vitro), after which the corresponding cartilage thickness and biomechanical properties were determined. Hybrid multivariate regression models based on principal component analysis and linear mixed effects modeling (PCA-LME) were utilized to relate cartilage in vitro spectra and biomechanical properties, as well as to account for the spatial dependency. Additionally, a k-nearest neighbors (kNN) classifier was employed to reject outlying ex vivo NIR spectra resulting from a non-optimal probe-cartilage contact. Model performance was evaluated for both in vitro and ex vivo NIR spectra via Spearman's rank correlation (ρ) and the ratio of performance to interquartile range (RPIQ). RESULTS: Regression models accurately predicted cartilage thickness and biomechanical properties from in vitro NIR spectra (Model: 0.77 ≤ ρ ≤ 0.87, 2.03 ≤ RPIQ ≤ 3.0; Validation: 0.74 ≤ ρ ≤ 0.84, 1.87 ≤ RPIQ ≤ 2.90). When predicting cartilage properties from ex vivo NIR spectra (0.33 ≤ ρ ≤ 0.57 and 1.02 ≤ RPIQ ≤ 2.14), a kNN classifier enhanced the accuracy of predictions (0.52 ≤ ρ ≤ 0.87 and 1.06 ≤ RPIQ ≤ 1.88). CONCLUSION: Arthroscopic NIRS could substantially enhance identification of damaged cartilage by enabling quantitative evaluation of cartilage biomechanical properties. The results demonstrate the capacity of NIRS in clinical applications.

Quantifying Subresolution 3D Morphology of Bone with Clinical Computed Tomography.

The aim of this study was to quantify sub-resolution trabecular bone morphometrics, which are also related to osteoarthritis (OA), from clinical resolution cone beam computed tomography (CBCT). Samples (n = 53) were harvested from human tibiae (N = 4) and femora (N = 7). Grey-level co-occurrence matrix (GLCM) texture and histogram-based parameters were calculated from CBCT imaged trabecular bone data, and compared with the morphometric parameters quantified from micro-computed tomography. As a reference for OA severity, histological sections were subjected to OARSI histopathological grading. GLCM and histogram parameters were correlated to bone morphometrics and OARSI individually. Furthermore, a statistical model of combined GLCM/histogram parameters was generated to estimate the bone morphometrics. Several individual histogram and GLCM parameters had strong associations with various bone morphometrics (|r| > 0.7). The most prominent correlation was observed between the histogram mean and bone volume fraction (r = 0.907). The statistical model combining GLCM and histogram-parameters resulted in even better association with bone volume fraction determined from CBCT data (adjusted R2 change = 0.047). Histopathology showed mainly moderate associations with bone morphometrics (|r| > 0.4). In conclusion, we demonstrated that GLCM- and histogram-based parameters from CBCT imaged trabecular bone (ex vivo) are associated with sub-resolution morphometrics. Our results suggest that sub-resolution morphometrics can be estimated from clinical CBCT images, associations becoming even stronger when combining histogram and GLCM-based parameters.

Optimal graft stiffness and pre-strain restore normal joint motion and cartilage responses in ACL reconstructed knee.

Anterior cruciate ligament (ACL) rupture leads to abnormal loading of the knee joint and increases the risk of osteoarthritis. It is unclear how different ACL reconstruction techniques affect knee joint motion and mechanics. As the in vivo measurement of knee joint loading is not possible, we used finite element analysis to assess the outcome of ACL reconstruction techniques. Effects of different ACL reconstruction techniques on knee joint mechanics were studied using six models during gait; with 1) healthy ACL, 2) ACL rupture, 3) single bundle ACL reconstruction, 4) double bundle ACL reconstruction, 5) weakened (softer) single bundle reconstruction and 6) single bundle reconstruction with less pre-strain. Early in the gait, the ACL rupture caused substantially increased tibial translation in the anterior direction as well as a smaller but increased lateral translation and internal tibial rotation. ACL rupture substantially reduced average stresses and strains, while local peak stresses and strains could be either increased or decreased. Single bundle and double bundle reconstructions restored joint motion close to normal levels. However, cartilage strains and stresses were elevated during the entire gait cycle. Models with modulated graft stiffness and pre-strain restored the joint motion and cartilage stresses and strains close to the normal, healthy levels. Results suggest that rather than the choice of reconstruction technique, stiffness and pre-strain of the ACL reconstruction affect the motion and mechanics of the operated knee. We suggest that an optimal choice of graft properties might help restore normal knee joint function and cartilage responses, thus, minimizing the risk of osteoarthritis.

Treatment of non-traumatic rotator cuff tears: A randomised controlled trial with one-year clinical results.

We have compared three different methods of treating symptomatic non-traumatic tears of the supraspinatus tendon in patients above 55 years of age. A total of 180 shoulders (173 patients) with supraspinatus tendon tears were randomly allocated into one of three groups (each of 60 shoulders); physiotherapy (group 1), acromioplasty and physiotherapy (group 2) and rotator cuff repair, acromioplasty and physiotherapy (group 3). The Constant score was assessed and followed up by an independent observer pre-operatively and at three, six and twelve months after the intervention. Of these, 167 shoulders were available for assessment at one year (follow-up rate of 92.8%). There were 55 shoulders in group 1 (24 in males and 31 in females, mean age 65 years (55 to 79)), 57 in group 2 (29 male and 28 female, mean age 65 years (55 to 79)) and 55 shoulders in group 3 (26 male and 29 female, mean age 65 years (55 to 81)). There were no between-group differences in the Constant score at final follow-up: 74.1 (sd 14.2), 77.2 (sd 13.0) and 77.9 (sd 12.1) in groups 1, 2 and 3, respectively (p = 0.34). The mean change in the Constant score was 17.0, 17.5, and 19.8, respectively (p = 0.34). These results suggest that at one-year follow-up, operative treatment is no better than conservative treatment with regard to non-traumatic supraspinatus tears, and that conservative treatment should be considered as the primary method of treatment for this condition.

Arthroscopic ultrasound technique for simultaneous quantitative assessment of articular cartilage and subchondral bone: an in vitro and in vivo feasibility study.

Traditional arthroscopic examination is subjective and poorly reproducible. Recently, we introduced an arthroscopic ultrasound method for quantitative diagnostics of cartilage lesions. Here we describe our investigation of the feasibility of ultrasound arthroscopy for simultaneous measurements of articular cartilage and subchondral bone. Human osteochondral samples (n = 13) were imaged using a clinical 9-MHz ultrasound system. Ultrasound reflection coefficients (R, IRC), the ultrasound roughness index (URI) and the apparent integrated backscattering coefficient (AIB) were determined for both tissues. Mechanical testing, histologic analyses and micro-scale computed tomography imaging were the reference methods. Ultrasound arthroscopies were conducted on two patients. The ultrasound reflection coefficient correlated with the Mankin score and Young's modulus of cartilage (|r| > 0.56, p < 0.05). Ultrasound parameters (R, IRC, AIB) for subchondral bone correlated with the bone surface/volume ratio (|r| > 0.70, p < 0.05) and trabecular thickness (|r| > 0.59, p < 0.05). Furthermore, R and subchondral bone mineral density were significantly correlated (|r| > 0.65, p < 0.05). Arthroscopic ultrasound examination provided diagnostically valuable information on cartilage and subchondral bone in vivo.

Strength retention of self-reinforced drawn poly-L/DL-lactide 70/30 (SR-PLA70) rods and fixation properties of distal femoral osteotomies with these rods. An experimental study on rats.

Self-reinforced polylevo-dextro-lactic acid (SR-PLA) 70 composite rods, (2 mm x 26 mm) were implanted in the dorsal subcutaneus tissue of sixteen rats. Osteotomies of the distal femur were fixed with SR-PLA70 composite rods (2 mm x 15 mm) in 39 rats. The follow-up times varied from 1 week to 1 year. After sacrifice three-point bending and shear tests were performed for subcutaneously placed rods, and radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of osteotomized and intact control femora were performed. At 52 weeks the shear strength and flexural modulus of the rods were 41% of the initial value, and the flexural strength was 43% of the initial value. In the osteotomies seven specimens had to be excluded due to postoperative infection or dislocation of the fragment. Six of the thirty-two evaluated osteotomies showed signs of postoperative infection. Twenty-six osteotomies healed uneventfully. No signs of inflammatory or foreign-body reaction were observed. The present investigation demonstrated that the mechanical strength and fixation properties of the SR-PLA70 rods are suitable for fixation of cancellous bone osteotomies in rats. The present article is the first report on successful application of SR-PLA70 rods for fixation of cancellous bone osteotomies studied.