RESUMEN
A pilot analysis of the tear fluid of patients with multiple sclerosis (MS) collected by glass microcapillary was performed using various experimental methods: liquid chromatography-mass spectrometry, Raman spectroscopy, infrared spectroscopy, and atomic-force microscopy. Infrared spectroscopy found no significant difference between the tear fluid of MS patients and the control spectra; all three significant peaks were located at around the same positions. Raman analysis showed differences between the spectra of the tear fluid of MS patients and the spectra of healthy subjects, which indicated a decrease in tryptophan and phenylalanine content and changes in the relative contributions of the secondary structures of the polypeptide chains of tear proteins. Atomic-force microscopy exhibited a surface fern-shaped dendrite morphology of the tear fluid of patients with MS, with less roughness on both oriented silicon (100) and glass substrates compared to the tear fluid of control subjects. The results of liquid chromatography-mass spectrometry showed downregulation of glycosphingolipid metabolism, sphingolipid metabolism, and lipid metabolism. Proteomic analysis identified upregulated proteins in the tear fluid of patients with MS such as cystatine, phospholipid transfer protein, transcobalamin-1, immunoglobulin lambda variable 1-47, lactoperoxidase, and ferroptosis suppressor protein 1; and downregulated proteins such as haptoglobin, prosaposin, cytoskeletal keratin type I pre-mRNA-processing factor 17, neutrophil gelatinase-associated lipocalin, and phospholipase A2. This study showed that the tear proteome in patients with MS is modified and can reflect inflammation. Tear fluid is not a commonly used biological material in clinico-biochemical laboratories. Experimental proteomics has the potential to become a promising contemporary tool for personalized medicine, and it might be applied in clinical practice by providing a detailed analysis of the tear-fluid proteomic profile of patients with MS.
Asunto(s)
Esclerosis Múltiple , Proteómica , Humanos , Proteómica/métodos , Esclerosis Múltiple/diagnóstico , Lágrimas/química , Espectrometría de Masas , Cromatografía LiquidaRESUMEN
Dry eye disease (DED) is a chronic debilitating ophthalmological disease with the current therapeutic options focused on the suppression of the symptoms. Among the possibilities of how to improve DED therapy, polyphenols have shown an enormous capacity to counteract DED functional changes. The study aimed to specifically target pathophysiological mechanisms by the addition of fisetin to the cyclosporine treatment protocol. We examined dog patients with DED on cyclosporine treatment that were administered 0.1% fisetin or fisetin-free eye drops. For the assessment of fisetin effects, tear film production and matrix metalloproteinase 9 (MMP-9) were studied in the tear film. Tear production was not recovered after 7 or 14 days (9.40 mm ± 6.02 mm, p = 0.47; 9.80 mm ± 6.83 mm, p = 0.53, respectively). MMP-9 levels significantly increased after 7 days and then dropped after 14 days (775.44 ng/mL ± 527.52 ng/mL, p = 0.05; 328.49 ng/mL ± 376.29 ng/mL, p = 1.00, respectively). Fisetin addition to cyclosporine DED treatment was not able to restore tear fluid production but influenced molecular pathological events through MMP-9.
Asunto(s)
Ciclosporina , Síndromes de Ojo Seco , Perros , Animales , Ciclosporina/uso terapéutico , Metaloproteinasa 9 de la Matriz , Síndromes de Ojo Seco/tratamiento farmacológico , Síndromes de Ojo Seco/veterinaria , Síndromes de Ojo Seco/diagnóstico , Lágrimas , Soluciones Oftálmicas/uso terapéuticoRESUMEN
Strain is known to enhance the activity of the oxygen reduction reaction in catalytic platinum alloy nanoparticles, whose inactivity is the primary impediment to efficient fuel cells and metal-air batteries. Bragg coherent diffraction imaging (BCDI) was employed to reveal the strain evolution during the voltammetric cycling in Pt-Ni alloy nanoparticles composed of Pt2Ni3, Pt1Ni1, and Pt3Ni2. Analysis of the 3D strain images using a core-shell model shows that the strain as large as 5% is induced on Pt-rich shells due to Ni dissolution. The composition dependency of the strain on the shells is in excellent agreement with that of the catalytic activity. The present study demonstrates that BCDI enables quantitative determination of the strain on alloy nanoparticles during electrochemical reactions, which provides a means to exploit surface strain to design a wide range of electrocatalysts.
Asunto(s)
Aleaciones , Nanopartículas , Catálisis , Oxidación-Reducción , Platino (Metal)RESUMEN
The applied potential dependent rate of atomic step motion of the Ag(001) surface in weak NaF electrolyte has been measured using a new extension of the technique of X-ray Photon Correlation Spectroscopy (XPCS). For applied potentials between hydrogen evolution and oxidation, the surface configuration completely changes on timescales of 10(2)-10(4) seconds depending upon the applied potential. These dynamics, directly measured over large areas of the sample surface simultaneously, are related to the surface energy relative to over or under potential. Concurrent specular X-ray scattering measurements reveal how the ordering of the water layers at the interface correlates with the dynamics.
RESUMEN
The properties of planar sensors based on tin dioxide and indium oxide used for the determination of acetone vapors have been studied. Sensors based on synthesized SnO2 and In2O3 nanopowders showed high sensitivity to low concentrations of acetone in a humid environment which simulates human exhalation. The addition of a small amount of AuIII ions to hydroxide sols significantly increases the threshold sensitivity and the sensor response in a wide range of acetone concentrations. In2O3-Au sensors have the maximum sensitivity at an operating temperature of 325 °C. The In2O3-Au-sensors reliably record the change in acetone concentration in the concentration range from a minimum of 0.1 to 5 ppm with high accuracy, which is necessary for rapid diagnostics of the condition of patients with diabetes (1.8-5.0 ppm). The high sensitivity of the obtained sensors is explained by the structural features and the surface conditions of oxides and gold nanoparticles, which depend on the sample synthesis conditions.
RESUMEN
We observed an epitaxial, air-stable, partially registered (2 × 1) oxide bilayer on Pt (001) nanofacets [V. Komanicky, A. Menzel, K.-C. Chang, and H. You, J. Phys. Chem. 109, 23543 (2005)]. The bilayer is made of two half Pt layers; the top layer has four oxygen bonds and the second layer two. The positions and oxidation states of the Pt atoms are determined by analyzing crystal truncation rods and resonance scattering data. The positions of oxygen atoms are determined by density functional theory (DFT) calculations. Partial registry on the nanofacets and the absence of such registry on the extended Pt (001) surface prepared similarly are explained in DFT calculations by strain relief that can be accommodated only by nanoscale facets.
RESUMEN
Magnetization reversal processes in the NiFe/FeMn exchange biased structures with various antiferromagnetic layer thicknesses (0-50 nm) and glass substrate temperatures (17-600 °C) during deposition were investigated in detail. Magnetic measurements were performed in the temperature range from 80 K up to 300 K. Hysteresis loop asymmetry was found at temperatures lower than 150 K for the samples with an antiferromagnetic layer thickness of more than 10 nm. The average grain size of FeMn was found to increase with the AFM layer increase, and to decrease with the substrate temperature increase. Hysteresis loop asymmetry was explained in terms of the exchange spring model in the antiferromagnetic layer.
RESUMEN
Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.
RESUMEN
Spectroscopic methods represent a group of analytical methods that demonstrate high potential in providing clinically relevant diagnostic information, such as biochemical, functional or structural changes of macromolecular complexes that might occur due to pathological processes or therapeutic intervention. Although application of these methods in the field of psychiatric research is still relatively recent, the preliminary results show that they have the capacity to detect subtle neurobiological abnormalities in major depressive disorder (MDD). Methods of mass spectrometry (MALDI-TOF MS), zymography, synchronous fluorescence spectroscopy (SFS), circular dichroism (CD) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM) were used to analyze the human tear fluid of subjects with MDD. Using MALDI-TOF MS, two diagnostically significant peaks (3747 and 16 411 m/z) were identified with an AUC value of 0.89 and 0.92 in tear fluid of subjects with MDD vs controls, respectively. We also identified various forms of matrix metalloproteinase 9 in subjects with MDD using zymography and synchronous fluorescence spectra (SFS) showed a significant increase in fluorescence intensity at 280 nm. CD spectra were redshifted in tear fluid of subjects with MDD vs healthy controls. FTIR spectroscopy showed changes in the positions of peaks for amide A, I, II in tear fluid of subjects with MDD vs controls. Moreover, atomic force microscopy (AFM) showed different pattern in the crystal structures of tear fluid components in subjects with MDD. SFS, CD, FTIR spectroscopy, AFM and MALDI-TOF MS confirmed, that the human tear fluid proteome could be helpful in discriminating between the group of subjects with MDD and healthy controls. These preliminary findings suggest that spectral methods could represent a useful tool in clinical psychiatry, especially in establishing differential diagnosis, monitoring illness progression and the effect of psychiatric treatment.
Asunto(s)
Trastorno Depresivo Mayor , Lágrimas/química , Biomarcadores , Trastorno Depresivo Mayor/diagnóstico , Humanos , Proteoma , Espectrometría de Masa por Láser de Matriz Asistida de Ionización DesorciónRESUMEN
Here, we demonstrate the impact of ferromagnetic layer coating on controlling the magneto-optical response. We found that the transverse magneto-optical Kerr effect (TMOKE) signal and TMOKE hysteresis loops of Ni80Fe20 thin layers coated with a Cr layer show a strong dependence on the thickness of the Cr layer and the incidence angle of the light. The transmission and reflection spectra were measured over a range of incidence angles and with different wavelengths so as to determine the layers' optical parameters and to explain the TMOKE behavior. The generalized magneto-optical and ellipsometry (GMOE) model based on modified Abeles characteristic matrices was used to examine the agreement between the experimental and theoretical results. A comprehensive theoretical and experimental analysis reveals the possibility to create a TMOKE suppression/enhancement coating at specific controllable incidence angles. This has potential for applications in optical microscopy and sensors.
RESUMEN
We produced millions of morphologically identical platinum catalyst nanoparticles in the form of ordered arrays epitaxially grown on (111), (100), and (110) strontium titanate substrates using electron beam lithography. The ability to design, produce, and characterize the catalyst nanoparticles allowed us to relate microscopic morphologies with macroscopic catalytic reactivities. We evaluated the activity of three different arrays containing different ratios of (111) and (100) facets for an oxygen-reduction reaction, the most important reaction for fuel cells. Increased catalytic activity of the arrays points to a possible cooperative interplay between facets with different affinities to oxygen. We suggest that the surface area of (100) facets is one of the key factors governing catalyst performance in the electrochemical reduction of oxygen molecules.
RESUMEN
Diabetes mellitus and prolonged hyperglycemia can cause diabetic retinopathy. Diabetic retinopathy arises from damage to retinal vessels and, in its final stages, causes blindness. The early stages are often asymptomatic and although regular screening of diabetic patients is recommended, the beginning of diabetic retinopathy is insufficiently detected. The diagnostic potential of fluorescence spectroscopy, infrared spectroscopy and atomic force microscopy as the untraditional methods for diabetes mellitus was investigated using tear fluid. In our pilot study the structural changes of tear fluid of patients with diabetes mellitus after insulin and oral antidiabetic drug treatment was compared with healthy subjects. The results of analysis, infrared spectroscopy and atomic force microscopy confirmed structural changes in tear fluid of patients in comparison with the tear fluid of healthy subjects. Using new experimental laboratory methods in future could contribute to an improvement in diagnosis of diabetes mellitus and other selected ocular diseases using tear fluid.
RESUMEN
The development of electrocatalytic materials of enhanced activity and efficiency through careful manipulation, at the atomic scale, of the catalyst surface structure has long been a goal of electrochemists. To accomplish this ambitious objective, it would be necessary both to obtain a thorough understanding of the relationship between the atomic-level surface structure and the catalytic properties and to develop techniques to synthesize and stabilize desired active sites. In this contribution, we present a combined experimental and theoretical study in which we demonstrate how this approach can be used to develop novel, platinum-based electrocatalysts for the CO electrooxidation reaction in CO(g)-saturated solution; the catalysts show activities superior to any pure-metal catalysts previously known. We use a broad spectrum of electrochemical surface science techniques to synthesize and rigorously characterize the catalysts, which are composed of adisland-covered platinum surfaces, and we show that highly undercoordinated atoms on the adislands themselves are responsible for the remarkable activity of these materials.
RESUMEN
Electrochemical double layers (EDL) form at electrified interfaces. Whereas the Gouy-Chapman model describes moderately charged EDL, the formation of Stern layers was predicted for highly charged EDL. Our results provide structural evidence for a Stern layer of cations at potentials close to hydrogen evolution in alkali fluoride and chloride electrolytes. Layering was observed by X-ray crystal truncation rods and atomic-scale recoil responses of Pt(111) surface layers. Ordering in the layer was confirmed by glancing-incidence in-plane diffraction measurements.
RESUMEN
The oxygen reduction reaction (ORR) was studied on CO-treated and untreated (111)-(100) nanofaceted platinum surfaces [Komanicky et al. J. Phys. Chem. 2005, 109, 23543] in sulfuric and perchloric acids using the rotating disk electrode technique. Activities of nanofaceted surfaces are found to be considerably higher than a simple average of the activities of (111) and (100) surfaces. We find that the high activity in sulfuric acid is consistent with the higher activity of (111) facets. It is due the weaker sulfate adsorption on finite-size (111) surfaces than on (111) single crystal surfaces where the ORR activity is suppressed by strong sulfate adsorption. However, the high activity found in the weakly absorbing perchloric acid cannot be explained by the finite-size effect, since the activities are reportedly insensitive to terrace sizes [Macia, M. D.; et al. J.Electroanal. Chem., 2004, 564, 141]. We propose a cooperative activity, unique to nanoscale objects, which results from oxy species crossing over between adjacent facets in nanometer proximities.
RESUMEN
We present a novel model system for nanoparticle electrocatalysts. A surface consisting of alternating (100) and (111) facets, several nanometers across and nearly 1 microm long, were self-assembled by annealing Pt single crystal surfaces initially cut at the midpoint between [111] and [100] directions, i.e., Pt(1+ square root of 3 1 1). The formation of these self-assembled arrays of nanofacets was monitored by in-situ surface X-ray scattering. These surfaces were further characterized with scanning probe microscopy and cyclic voltammetry. We found that the Pt(1+ square root of 3 1 1) surface is flat with less than 1 nm rms roughness when it was annealed in argon/hydrogen atmosphere. Then the surface forms nanofacets when it is annealed in pure air. This nanofaceting transition was completely reversible and reproducible. We investigated effects of CO adsorption on the voltammetric characteristics of both hydrogen-annealed and air-annealed surfaces. We found that CO-adsorption/desorption cycles in CO containing electrolyte solution result in considerable modification of blank cyclic voltammograms for the both surfaces. We attributed these differences to the electrochemical annealing of surface defects due to the increased mobility during the cycles.
RESUMEN
Areas of 80-3500 µm2 are displayed by gold single-crystal ultramicroelectrodes, which were fabricated from gold single crystals grown electrolytically in silicate gels. According to their cyclic voltammograms in 0.01 M HCl, these ultramicroelectrodes behave similarly to electrodes of more normal dimensions with the same crystallographic orientation of the surface.
RESUMEN
We developed a method for production of arrays of platinum nanocrystals of controlled size and shape using templates from ordered silica bead monolayers. Silica beads with nominal sizes of 150 and 450 nm were self-assembled into monolayers over strontium titanate single crystal substrates. The monolayers were used as shadow masks for platinum metal deposition on the substrate using the three-step evaporation technique. Produced arrays of epitaxial platinum islands were transformed into nanocrystals by annealing in a quartz tube in nitrogen flow. The shape of particles is determined by the substrate crystallography, while the size of the particles and their spacing are controlled by the size of the silica beads in the monolayer mask. As a proof of concept, arrays of platinum nanocrystals of cubooctahedral shape were prepared on (100) strontium titanate substrates. The nanocrystal arrays were characterized by atomic force microscopy, scanning electron microscopy, and synchrotron X-ray diffraction techniques.
RESUMEN
A previously reported method for preparation of gold (111) single-crystal utramicroelectrodes (scumes) has been used to fabricate gold (100) scumes with effective diameters from 20 to 50 microm. Cyclic voltammograms for these ultramicroelectrodes obtained in perchloric acid show similar features to gold (100) single-crystal electrodes of more conventional sizes, but with differences that are a result of different surface preparation methods used before the measurement. The gold crystals used to prepare Au (100) scumes were grown at room temperature so that the cyclic voltammetric characteristics reflect the unique properties of a room temperature-ordered surface. The AFM images of the (100) facets of these crystals are also presented. The effects of annealing Au (100) at 800 degrees C for a short time were studied both electrochemically and using AFM and are discussed with respect to the data obtained for crystals grown at room temperature.