Distinguishing the Effects of Life Threat, Killing Enemy Combatants, and Unjust War Events in U.S. Service Members.

Although previous studies have identified behavioral health risks associated with combat exposure, it is unclear which types of combat events are associated with these risks, particularly regarding contrasts among the risks associated with life-threatening experiences, killing combatants, and exposure to unjust war events, such as killing a noncombatant or being unable to help civilian women and children. In the present study, we examined surveys from 402 soldiers following deployment (i.e., baseline) and again 13 months later (i.e., Year 1). Regression analyses were conducted across a range of behavioral health (e.g., posttraumatic stress disorder, depression, suicide ideation, anxiety, somatic, insomnia, aggression) and benefit-finding measures, each controlling for two combat event categories while assessing the predictive utility of a third. The results suggested that life-threatening events were associated with poor behavioral health at baseline, relative risk (RR) = 10.00, but not at Year 1, RR = 2.67. At both baseline and Year 1, killing enemy combatants was not associated with behavioral health, RRs = 1.67-3.33, but was positively associated with benefit-finding, RRs = 26.67-40.00. Exposure to unjust war events was associated with a transdiagnostic pattern of behavioral health symptoms at baseline, RR = 40.00, and Year 1, RR = 23.33. Overall, the results suggest unjust war event exposure is particularly injurious, above and beyond exposure to other combat-related events. Future research can build on these findings to develop clearer descriptions of the combat events that might place service members at risk for moral injury and inform the development of assessment and treatment options.

The CFL fails before the ATFL immediately after combined ligament repair in a biomechanical cadaveric model.

PURPOSE: To assess the impact on ankle stability after repairing the ATFL alone compared to repairing both the ATFL and CFL in a biomechanical cadaver model. METHODS: Ten matched pairs of intact, fresh frozen human cadaver ankles (normal) were mounted to a test machine in 20.0° plantar flexion and 15.0° of internal rotation. Each ankle was loaded to body weight and then tested from 0.0° to 20.0° of inversion. The data recorded were torque at 20.0° and stiffness, peak pressure and contact area in the ankle joint using a Tekscan sensor, rotation of the talus and calcaneus, and translation of the calcaneus using a three-dimensional motion capture system. Ankles then underwent sectioning of the ATFL and CFL (injured), retested, then randomly assigned to ATFL-only Broström repair or combined ATFL and CFL repair. Testing was repeated after repair then loaded in inversion to failure (LTF). RESULTS: The stiffness of the ankle was not significantly increased compared to the injured condition by repairing the ATFL only (n.s.) or the ATFL/CFL (n.s.). The calcaneus had significantly more rotation than the injured condition in the ATFL-only repair (p = 0.037) but not in the ATFL/CFL repair (n.s.). The ATFL failed at 40.3% higher torque than the CFL, at 17.4 ± 7.0 N m and 12.4 ± 4.1 N m, respectively, and 62.0% more rotation, at 43.9 ± 5.6° and 27.1 ± 6.8°, respectively. CONCLUSIONS: There was a greater increase in stiffness following combined ATFL/CFL repair compared to ATFL-only repair, although this did not reach statistical significance. The CFL fails before the ATFL, potentially indicating its vulnerability immediately following repair. LEVEL OF EVIDENCE: III, case-control therapeutic study.

Diabetes and obesity burden and improvements in cardiometabolic parameters in patients with psoriasis or psoriatic arthritis receiving apremilast in a real-world setting.

Introduction: Patients with psoriasis and psoriatic arthritis have a higher prevalence of cardiometabolic comorbidities compared to the general population. Clinical data suggest apremilast may reduce weight and glycated hemoglobin (HbA1c). Objective: To describe changes in cardiometabolic parameters among patients with psoriasis and psoriatic arthritis newly treated with apremilast by prediabetes/diabetes or obesity status. Methods: This was a retrospective cohort study of electronic medical records from patients with psoriasis and/or psoriatic arthritis in the OM1 Real-World Data Cloud who newly initiated apremilast. Changes from baseline in body mass index, weight, HbA1c, and lipids were evaluated at 6 and 12 months using a multivariable linear regression model stratified by prediabetes/diabetes or obesity status. Results: Of 8487 patients initiating apremilast, 24% had diabetes. Of 8250 patients with body mass index available, 27% were obese and 34% were severely obese. Patients experienced decreases in body mass index and weight at 6 and 12 months regardless of diabetes or obesity status, with the greatest reductions seen in those with diabetes and obesity. Reductions in HbA1c at 6 months were seen in patients without diabetes and patients with severe obesity. Conclusions: Treatment with apremilast may provide the greatest cardiometabolic benefit to those with the greatest burden of cardiometabolic disease.

Biomechanical Comparison of All-Soft Suture Anchor Single-Row vs Double-Row Bridging Construct for Insertional Achilles Tendinopathy.

BACKGROUND: Two common operative fixation techniques for insertional Achilles tendinopathy are the use of all-soft suture anchors vs synthetic anchors with a suture bridge. Despite increasing emphasis on early postoperative mobilization, the biomechanical profile of these repairs is not currently known. We hypothesized that the biomechanical profiles of single-row all-soft suture anchor repairs would differ when compared to double-row suture bridge repairs. METHODS: Achilles tendons were detached from their calcaneal insertions on 6 matched-pair, fresh-frozen cadaver through-knee amputation specimens. Group 1 underwent a single-row repair with all-soft suture anchors. Group 2 was repaired with a double-row bridging suture bridge construct. Achilles-calcaneal displacement was tracked while specimens were cyclically loaded from 10 to 100 N for 2000 cycles and then loaded to failure. Linear mixed models were used to analyze the independent effects of age, body mass index, tendon morphology, repair construct, and footprint size on clinical and ultimate failure loads, Achilles-calcaneal displacement, and mode of failure. RESULTS: The suture bridge group was independently associated with an approximately 50-N increase in the load to clinical failure (defined as more than 5 mm tendon displacement). There was no difference in ultimate load to failure or tendon/anchor displacement between the 2 groups. CONCLUSION: This cadaveric study found that a double-row synthetic bridge construct had less displacement during cyclic loading but was not able to carry more load before clinical failure when compared to a single-row suture anchor construct for the operative repair of insertional Achilles tendinopathy. CLINICAL RELEVANCE: Our data suggest that double-row suture bridge constructs increase the load to clinical failure for operative repairs of insertional Achilles tendinopathy. It must be noted that these loads are well below what occurs during gait and the repair must be protected postoperatively without early mobilization. This study also identified several clinical factors that may help predict repair strength and inform further research.

Precontoured Quadrilateral Surface Acetabular Plate Fixation Demonstrates Increased Stability When Compared With Pelvic Reconstruction Plates: A Biomechanical Study.

OBJECTIVE: To compare the stability of 3 fixation strategies for a transverse acetabular fracture: a reconstruction plate with anterior and posterior column screws (group A); an infrapectineal precontoured quadrilateral surface buttress (iPQSB) plate alone (group B); and an anterior column lag-screw and iPQSB plate (group C). METHODS: A transverse acetabular fracture was created in 18 synthetic hemipelvises. Six were fixed by each of the 3 methods described. Specimens underwent cyclic axial compressive loading to 1700N for 42,000 cycles while anterior and posterior column displacements were measured, followed 4800N for 50 cycles. Displacement and stiffness data were analyzed with analysis of variance and Tukey HSD. A Cox proportional hazards regression model was used to determine survival rate. P values < 0.05 were considered significant. RESULTS: Group C had significantly less posterior column displacement (0.16 ± 0.06 mm) compared with group B (0.38 ± 0.37 mm, P < 0.0001) and group A (0.38 ± 0.37 mm, P < 0.0001). In addition, group A had significantly more anterior column displacement (0.28 ± 0.11 mm) than group B (0.22 ± 0.14 mm, P = 0.0310) and group C (0.18 ± 0.09 mm, P = 0.0001). Group C was 10.5% stiffer than group A (P = 0.0037). Group B had a 7.27x greater rate of failure than group C (95% confidence interval, 1.6-33.2). DISCUSSION AND CONCLUSION: Under anatomical loading, iPQSB plates with anterior column lag-screw fixation demonstrate increased stability in a synthetic bone transverse acetabular fracture model. Based on our data, we support additional evaluation of early weight-bearing after transverse acetabular fracture fixation in patients with healthy bone when an anterior column screw-iPQSB plate construct is used.

Biomechanical Comparison of Low-Profile Contoured Locking Plate With Single Compression Screw to Fully Threaded Compression Screws for First MTP Fusion.

BACKGROUND: Open metatarsophalangeal (MTP) arthrodesis using locked plates produces good clinical outcomes. However, arthroscopic fusion with new-generation fully threaded compression screws is emerging as an alternative. The purpose of this study was to compare low-profile contoured locked plates with fully threaded compression screws for first MTP fusion, in a biomechanical cadaveric model. METHODS: The first rays of 8 matched pairs of fresh frozen cadaveric feet underwent dissection and dual-energy x-ray absorptiometry (DEXA) scanning to measure bone mineral density (BMD). The "plate" group was prepared with cup-and-cone reamers, and fixation of the MTP joint with 1 compression screw and low-profile dorsal locked plate. The matched-pair "screws" group was prepared through a simulated arthroscopic technique, achieving fixation with 2 new-generation fully threaded compression screws. The plantar MTP gap was recorded with an extensometer during 250 000 90-N cyclic loads followed by a single load to failure. RESULTS: The screw group demonstrated significantly greater stiffness, 31.6 N/mm (plates) and 51.7 N/mm (screws) (P = .0045). There was no significant difference in plantar gapping or load to failure, 198.6 N (plates) and 290.1 N (screws) (P = .2226). Stiffness and load to failure were highly correlated to BMD for the screw group, r =0.79 and r = 0.94, respectively, but less so for the plate group, r = 0.36 and r = 0.62, respectively. The maximum metatarsal head height measured on the lateral view was strongly correlated with load to failure for both the plate- and screw-only groups (r > 0.9). CONCLUSION: These data demonstrate that hallux MTP arthrodesis utilizing fully threaded compression screws had similar plantar gapping and load to failure when compared with the low-profile locking plate, but with significantly more stiffness. These results support an increased role of fully threaded screws for MTP arthrodesis using either the arthroscopic or open technique. However, with decreased BMD plate fixation may remain the better fixation choice. CLINICAL RELEVANCE: Our data suggest that with regard to construct stability, fully threaded headless compression screws may be just as effective as low-profile locking plates, but BMD and MTP joint fluoroscopic measurements should be considered in the decision-making process for fixation.

The Role of Calcaneofibular Ligament Injury in Ankle Instability: Implications for Surgical Management.

BACKGROUND: Acute inversion ankle sprains are among the most common musculoskeletal injuries. Higher grade sprains, including anterior talofibular ligament (ATFL) and calcaneofibular ligament (CFL) injury, can be particularly challenging. The precise effect of CFL injury on ankle instability is unclear. HYPOTHESIS: CFL injury will result in decreased stiffness, decreased peak torque, and increased talar and calcaneal motion and will alter ankle contact mechanics when compared with the uninjured ankle and the ATFL-only injured ankle in a cadaveric model. STUDY DESIGN: Descriptive laboratory study. METHODS: Ten matched pairs of cadaver specimens with a pressure sensor in the ankle joint and motion trackers on the fibula, talus, and calcaneus were mounted on a material testing system with 20° of ankle plantarflexion and 15° of internal rotation. Intact specimens were axially loaded to body weight and then underwent inversion along the anatomic axis of the ankle from 0° to 20°. The ATFL and CFL were sequentially sectioned and underwent inversion testing for each condition. Linear mixed models were used to determine significance for stiffness, peak torque, peak pressure, contact area, and inversion angles of the talus and calcaneus relative to the fibula across the 3 conditions. RESULTS: Stiffness and peak torque did not significantly decrease after sectioning of the ATFL but decreased significantly after sectioning of the CFL. Peak pressures in the tibiotalar joint decreased and mean contact area increased significantly after CFL release. Significantly more inversion of the talus and calcaneus as well as calcaneal medial displacement was seen with weightbearing inversion after sectioning of the CFL. CONCLUSION: The CFL contributes considerably to lateral ankle instability. Higher grade sprains that include CFL injury result in significant decreases in rotation stiffness and peak torque, substantial alteration of contact mechanics at the ankle joint, increased inversion of the talus and calcaneus, and increased medial displacement of the calcaneus. CLINICAL RELEVANCE: Repair of an injured CFL should be considered during lateral ligament reconstruction, and there may be a role for early repair in high-grade injuries to avoid intermediate and long-term consequences of a loose or incompetent CFL.

Factors associated with self-rated health among migrant workers: results from a population-based cross-sectional study in Almaty, Kazakhstan.

OBJECTIVES: To determine factors associated with SRH among migrant workers in Almaty, Kazakhstan. METHODS: In 2007, 805 vendors were screened. Approximately half were eligible (n =450), defined as at least 18 years old, a worker/owner in a randomly selected stall, having traveled 2 + hours outside of Almaty within the past year, and being an internal/external migrant. 28 non-migrants were excluded, leaving 422 participants. Logistic regression was used to examine the relationship between SRH, mental health, and psychosocial problems. RESULTS: Approximately 46% reported having poor or fair SRH. Clinical depression (OR 0.859, 95% CI 0.342-2.154), alcohol problems (OR 1.169, 95% CI 0.527-2.593), and legal status (OR 0.995, 95% CI 0.806-1.229) were not significantly associated with SRH, nor was exposure to interpersonal violence among women (OR 1.554, 95% CI 0.703-3.435). After adjusting for key variables, only ethnicity and social support were found to be significantly protective against poor or fair SRH. CONCLUSIONS: SRH was not a comprehensive health measure for these Central Asian migrant workers. More specific questions are needed to identify mental illness and interpersonal violence.