Electrophotocatalytic oxygenation of multiple adjacent C-H bonds.

Oxygen-containing functional groups are nearly ubiquitous in complex small molecules. The installation of multiple C-O bonds by the concurrent oxygenation of contiguous C-H bonds in a selective fashion would be highly desirable but has largely been the purview of biosynthesis. Multiple, concurrent C-H bond oxygenation reactions by synthetic means presents a challenge1-6, particularly because of the risk of overoxidation. Here we report the selective oxygenation of two or three contiguous C-H bonds by dehydrogenation and oxygenation, enabling the conversion of simple alkylarenes or trifluoroacetamides to their corresponding di- or triacetoxylates. The method achieves such transformations by the repeated operation of a potent oxidative catalyst, but under conditions that are sufficiently selective to avoid destructive overoxidation. These reactions are achieved using electrophotocatalysis7, a process that harnesses the energy of both light and electricity to promote chemical reactions. Notably, the judicious choice of acid allows for the selective synthesis of either di- or trioxygenated products.

Electrophotocatalysis for Organic Synthesis.

Electrocatalysis and photocatalysis have been the focus of extensive research efforts in organic synthesis in recent decades, and these powerful strategies have provided a wealth of new methods to construct complex molecules. Despite these intense efforts, only recently has there been a significant focus on the combined use of these two modalities. Nevertheless, the past five years have witnessed rapidly growing interest in the area of electrophotocatalysis. This hybrid strategy capitalizes on the enormous benefits of using photons as reagents while also employing an electric potential as a convenient and tunable source or sink of electrons. Research on this topic has led to a number of methods for C-H functionalization, reductive cross-coupling, and olefin addition among others. This field has also seen the use of a broad range of catalyst types, including both metal and organocatalysts. Of particular note has been work with open-shell photocatalysts, which tend to have comparatively large redox potentials. Electrochemistry provides a convenient means to generate such species, making electrophotocatalysis particularly amenable to this intriguing class of redox catalyst. This review surveys methods in the area of electrophotocatalysis as applied to organic synthesis, organized broadly into oxidative, reductive, and redox neutral transformations.

Electrochemical Vicinal C-H Difunctionalization of Saturated Azaheterocycles.

A method to functionalize two vicinal C-H bonds of saturated azaheterocycles is described. The procedure involves subjecting the substrate to a mixture of hydrochloric acid, acetic acid, and acetic anhydride in an undivided electrochemical cell at a constant current, resulting in stereoselective conversion to the corresponding α-acetoxy-ß-chloro derivative. The α-position can be readily substituted with a range of other groups, including alkyl, aryl, allyl, alkynyl, alkoxy, or azido functionalities. Furthermore, we demonstrate that the ß-chloro position can be engaged in Suzuki cross-coupling. This protocol thus enables the rapid diversification of simple five-, six-, and seven-membered saturated azaheterocycles at two adjacent positions.

Hydrazine-Catalysed Ring-Opening Metathesis Polymerization Of Cyclobutenes.

Materials formed by the ring-opening metathesis polymerization (ROMP) of cyclic olefins are highly valued for industrial and academic applications but are difficult to prepare free of metal contaminants. Here we describe a highly efficient metal-free ROMP of cyclobutenes using hydrazine catalysis. Reactions can be initiated via in situ condensation of a [2.2.2]-bicyclic hydrazine catalyst with an aliphatic or aromatic aldehyde initiator. The polymerizations show living characteristics, achieving excellent control over molecular weight, low dispersity values, and high chain-end fidelity. Additionally, the hydrazine can be used in substoichiometric amounts relative to the aldehyde chain-end while maintaining good control over molecular weight and low dispersity values, indicating that a highly efficient chain transfer mechanism is occurring.

Cross-Coupling of Amines via Photocatalytic Denitrogenation of In Situ Generated Diazenes.

A method for C(sp3)-C(sp3) cross-coupling of amines is described. Primary amines are converted to 1,2-dialkyldiazenes by treatment with O-nosylhydroxylamines in the presence of atmospheric oxygen. Denitrogenation of the diazenes with an iridium photocatalyst then forges the C-C bond. The substrate scope accommodates a broad latitude of functionality, including heteroaromatics and unprotected alcohols and acids.

Cyclopropenium Ions in Catalysis.

Cyclopropenium ions are the smallest class of aromatic compounds, satisfying Hückel's rules of aromaticity with two π electrons within a three-membered ring. First prepared by Breslow in 1957, cyclopropenium ions have been found to possess extraordinary stability despite being both cationic and highly strained. In the 65 years since their first preparation, cyclopropenium ions have been the subject of innumerable studies concerning their synthesis, physical properties, and reactivity. However, prior to our work, the reactivity of these unique carbocations had not been exploited for reaction promotion or catalysis.Over the past 13 years, we have been exploring aromatic ions as unique and versatile building blocks for the development of catalysts for organic chemistry. A major portion of this work has been focused on leveraging the remarkable properties of the smallest of the aromatic ions─cyclopropeniums─as a design element in the invention of highly reactive catalysts. Indeed, because of its unique profile of hydrolytic stability, compact geometry, and relatively easy oxidizability, the cyclopropenium ring has proven to be a highly advantageous construction module for catalyst invention.In this Account, we describe some of our work using cyclopropenium ions as a key element in the design of novel catalysts. First, we discuss our early work aimed at promoting dehydrative reactions, starting with Appel-type chlorodehydrations of alcohols and carboxylic acids, cyclic ether formations, and Beckmann rearrangements and culminating in the realization of catalytic chlorodehydrations of alcohols and a catalytic Mitsunobu-type reaction. Next, we describe the development of cyclopropenimines as strong, neutral organic Brønsted bases and, in particular, the use of chiral cyclopropenimines for enantioselective Brønsted catalysis. We also describe the development of higher-order cyclopropenimine superbases. The use of tris(amino)cyclopropenium (TAC) ions as a novel class of phase-transfer catalysts is discussed for the reaction of epoxides with carbon dioxide. Next, we describe the formation of a cyclopropenone radical cation that has a portion of its spin density on the oxygen atom, leading to some peculiar metal ligand behavior. Finally, we discuss recent work that employs TAC electrophotocatalysts for oxidation reactions. The key intermediate for this chemistry is a TAC radical dication, which as an open-shell photocatalyst has remarkably strong excited-state oxidizing power. We describe the application of this strategy to transformations ranging from the oxidative functionalization of unactivated arenes to the regioselective derivatization of ethers, C-H aminations, vicinal C-H diaminations, and finally aryl olefin dioxygenations. Collectively, these catalytic platforms demonstrate the utility of charged aromatic rings, and cyclopropenium ions in particular, to enable unique advances in catalysis.

Carbonyl-Olefin Metathesis.

This Review describes the development of strategies for carbonyl-olefin metathesis reactions relying on stepwise, stoichiometric, or catalytic approaches. A comprehensive overview of currently available methods is provided starting with Paternò-Büchi cycloadditions between carbonyls and alkenes, followed by fragmentation of the resulting oxetanes, metal alkylidene-mediated strategies, [3 + 2]-cycloaddition approaches with strained hydrazines as organocatalysts, Lewis acid-mediated and Lewis acid-catalyzed strategies relying on the formation of intermediate oxetanes, and protocols based on initial carbon-carbon bond formation between carbonyls and alkenes and subsequent Grob-fragmentations. The Review concludes with an overview of applications of these currently available methods for carbonyl-olefin metathesis in complex molecule synthesis. Over the past eight years, the field of carbonyl-olefin metathesis has grown significantly and expanded from stoichiometric reaction protocols to efficient catalytic strategies for ring-closing, ring-opening, and cross carbonyl-olefin metathesis. The aim of this Review is to capture the status quo of the field and is expected to contribute to further advancements in carbonyl-olefin metathesis in the coming years.

Regiodivergent Electrophotocatalytic Aminooxygenation of Aryl Olefins.

A method for the regiodivergent aminooxygenation of aryl olefins under electrophotocatalytic conditions is described. The procedure employs a trisaminocyclopropenium (TAC) ion catalyst with visible light irradiation under a controlled electrochemical potential to convert aryl olefins to the corresponding oxazolines with high chemo- and diastereoselectivity. With the judicious choice between two inexpensive and abundant reagents, namely water and urethane, either 2-amino-1-ol or 1-amino-2-ol derivatives could be prepared from the same substrate. This method is amenable to multigram synthesis of the oxazoline products with low catalyst loadings.

Electrophotocatalysis: Combining Light and Electricity to Catalyze Reactions.

Visible-light photocatalysis and electrocatalysis are two powerful strategies for the promotion of chemical reactions that have received tremendous attention in recent years. In contrast, processes that combine these two modalities, an area termed electrophotocatalysis, have until recently remained quite rare. However, over the past several years a number of reports in this area have shown the potential of combining the power of light and electrical energy to realize new catalytic transformations. Electrophotocatalysis offers the ability to perform photoredox reactions without the need for large quantities of stoichiometric or superstoichiometric chemical oxidants or reductants by making use of an electrochemical potential as the electron source or sink. In addition, electrophotocatalysis is readily amenable to the generation of open-shell photocatalysts, which tend to have exceptionally strong redox potentials. In this way, potent yet selective redox reactions have been realized under relatively mild conditions. This Perspective highlights recent advances in the area of electrophotocatalysis and provides some possible avenues for future work in this growing area.

Highly Twisted Azobenzene Ligand Causes Crystals to Continuously Roll in Sunlight.

Direct conversion of solar energy to mechanical work promises higher efficiency than multistep processes, adding a key tool to the arsenal of energy solutions necessary for our global future. The ideal photomechanical material would convert sunlight into mechanical motion rapidly, without attrition, and proportionally to the stimulus. We describe crystals of a tetrahedral isocyanoazobenzene-copper complex that roll continuously when irradiated with broad spectrum white light, including sunlight. The rolling results from bending and straightening of the crystal due to blue light-driven isomerization of a highly twisted azobenzene ligand. These findings introduce geometrically constrained crystal packing as a strategy for manipulating the electronic properties of chromophores. Furthermore, the continuous, solar-driven motion of the crystals demonstrates direct conversion of solar energy to continuous physical motion using easily accessed molecular systems.

Poly(2,3-Dihydrofuran): A Strong, Biorenewable, and Degradable Thermoplastic Synthesized via Room Temperature Cationic Polymerization.

Creation of strong and tough plastics from sustainable and biorenewable resources is a significant challenge in polymer science. This challenge is further complicated when attempting to make these materials using an economically viable process, which is often hindered by the production and availability of chemical feedstocks and the efficiency of the monomer synthesis. Herein, we report the synthesis and characterization of a strong thermoplastic made from 2,3-dihydrofuran (DHF), a monomer made in one step from 1,4-butanediol, a bioalcohol already produced on the plant scale. We developed a green, metal-free cationic polymerization to enable the production of poly(2,3-dihydrofuran) (PDHF) with molecular weights of up to 256 kg/mol at room temperature. Characterization of these polymers showed that PDHF possesses high tensile strength and toughness (70 and 14 MPa, respectively) comparable to commercial polycarbonate, high optical clarity, and good barrier properties to oxygen, carbon dioxide, and water. These properties make this material amenable to a variety of applications, from food packaging to high strength windows. Importantly, we have also developed a facile oxidative degradation process of PDHF, providing an end-of-life solution for PDHF materials.

Metal-Free Ring-Opening Metathesis Polymerization with Hydrazonium Initiators.

The ring-opening metathesis polymerization (ROMP) of cyclopropenes using hydrazonium initiators is described. The initiators, which are formed by the condensation of 2,3-diazabicyclo[2.2.2]octane and an aldehyde, polymerize cyclopropene monomers by a sequence of [3+2] cycloaddition and cycloreversion reactions. This process generates short chain polyolefins (Mn ≤9.4 kg mol-1 ) with relatively low dispersities (D≤1.4). The optimized conditions showed efficiency comparable to that achieved with Grubbs' 2nd generation catalyst for the polymerization of 3-methyl-3-phenylcyclopropene. A positive correlation between monomer to initiator ratio and degree of polymerization was revealed through NMR spectroscopy.

C-H Amination via Electrophotocatalytic Ritter-type Reaction.

A method for C-H bond amination via an electrophotocatalytic Ritter-type reaction is described. The reaction is catalyzed by a trisaminocyclopropenium (TAC) ion in an electrochemical cell under irradiation. These conditions convert benzylic C-H bonds to acetamides without the use of a stoichiometric chemical oxidant. A range of functionality is shown to be compatible with this transformation, and several complex substrates are demonstrated.

Electrophotocatalytic Acetoxyhydroxylation of Aryl Olefins.

A method for the acetoxyhydroxylation of olefins with syn stereoselectivity under electrophotocatalytic conditions is described. The procedure uses a trisaminocyclopropenium (TAC) ion catalyst with visible light irradiation under a controlled electrochemical potential to convert aryl olefins to the corresponding glycol monoesters with high chemo- and diastereoselectivity. This reaction can be performed in batch or in flow, enabling multigram synthesis of the monoester products.

Electrophotocatalytic C-H Heterofunctionalization of Arenes.

The electrophotocatalytic heterofunctionalization of arenes is described. Using 2,3-dichloro-5,6-dicyanoquinone (DDQ) under a mild electrochemical potential with visible-light irradiation, arenes undergo oxidant-free hydroxylation, alkoxylation, and amination with high chemoselectivity. In addition to batch reactions, an electrophotocatalytic recirculating flow process is demonstrated, enabling the conversion of benzene to phenol on a gram scale.

Hydrogen Bond Donor Catalyzed Cationic Polymerization of Vinyl Ethers.

The synthesis of high-molecular-weight poly(vinyl ethers) under mild conditions is a significant challenge, since cationic polymerization reactions are highly sensitive to chain-transfer and termination events. We identified a novel and highly effective hydrogen bond donor (HBD)-organic acid pair that can facilitate controlled cationic polymerization of vinyl ethers under ambient conditions with excellent monomer compatibility. Poly(vinyl ethers) of molar masses exceeding 50 kg mol-1 can be produced within 1 h without elaborate reagent purification. Modification of the HBD structure allowed tuning of the polymerization rate, while DFT calculations helped elucidate crucial intermolecular interactions between the HBD, organic acid, and polymer chain end.

Enantioenriched α-substituted glutamates/pyroglutamates via enantioselective cyclopropenimine-catalyzed Michael addition of amino ester imines.

A procedure for the enantioselective synthesis of α-substituted glutamates and pyroglutamates via a cyclopropenimine-catalyzed Michael addition of amino ester imines is described. Enantioselectivities of up to 94% have been achieved, and a variety of functional groups were found to be compatible. The impact of the catalyst structure and imine substitution is discussed. Compared to other methods, this protocol allows for a broader and more enantioselective access to pyroglutamate derivatives.

Electrophotocatalytic C-H Functionalization of Ethers with High Regioselectivity.

The highly regioselective electrophotocatalytic C-H functionalization of ethers is described. These reactions are catalyzed by a trisaminocyclopropenium (TAC) ion at mild electrochemical potential with visible light irradiation. Ethers undergo oxidant-free coupling with isoquinolines, alkenes, alkynes, pyrazoles, and purines with typically high regioselectivity for the less-hindered α-position. The reaction is proposed to operate via hydrogen atom transfer (HAT) from the substrate to the photoexcited TAC radical dication, thus demonstrating a new reactivity mode for this electrophotocatalyst.

Reductive Electrophotocatalysis: Merging Electricity and Light To Achieve Extreme Reduction Potentials.

We describe a new electrophotocatalytic strategy that harnesses the power of light and electricity to generate an excited radical anion with a reducing potential of -3.2 V vs SCE, which can be used to activate substrates with very high reduction potentials (Ered ≈ -1.9 to -2.9 V). The resultant aryl radicals can be engaged in various synthetically useful transformations to furnish arylboronate, arylstannane, and biaryl products.

Electrophotocatalytic SN Ar Reactions of Unactivated Aryl Fluorides at Ambient Temperature and Without Base.

The electrophotocatalytic SN Ar reaction of unactivated aryl fluorides at ambient temperature without strong base is demonstrated.