RESUMEN
BACKGROUND: Depression is a prevalent mental health condition worldwide but there is limited data on its presentation and associated symptoms in primary care settings in low- and middle-income countries like Nepal. This study aims to assess the prevalence of depression, its hallmark and other associated symptoms that meet the Diagnostic and Statistical Manual (DSM-5) criteria in primary healthcare facilities in Nepal. The collected information will be used to determine the content of a mobile app-based clinical guidelines for better detection and management of depression in primary care. METHODS: A total of 1,897 adult patients aged 18-91 (63.1% women) attending ten primary healthcare facilities in Jhapa, a district in eastern Nepal, were recruited for the study between August 2, 2021, and March 25, 2022. Trained research assistants conducted face-to-face interviews in private spaces before the consultation with healthcare providers. Depression symptoms, including hallmark symptoms, was assessed using the validated Nepali version of the Patient Health Questionnaire (PHQ-9). RESULTS: One in seven (14.5%) individuals attending primary health care facilities in Jhapa met the threshold for depression based on a validated cut-off score ( > = 10) on the PHQ-9. The most commonly reported depressive symptoms were loss of energy and sleep difficulties. Approximately 25.4% of women and 18.9% of men endorsed at least one of the two hallmark symptoms on the PHQ-9. Using a DSM-5 algorithm (at least one hallmark symptom and five or more total symptoms) to score the PHQ-9, 6.3% of women and 4.3% of men met the criteria for depression. The intra-class correlation coefficient for PHQ-9 total scores by health facility as the unit of clustering was 0.01 (95% confidence interval, 0.00-0.04). CONCLUSION: Depression symptoms are common among people attending primary healthcare facilities in Nepal. However, the most common symptoms are not the two hallmark criteria. Use of total scores on a screening tool such as the PHQ-9 risks overestimating the prevalence and generating false positive diagnoses. Compared to using cut off scores on screening tools, training health workers to first screen for hallmark criteria may increase the accuracy of identification and lead to better allocation of treatment resources.
Asunto(s)
Depresión , Atención Primaria de Salud , Humanos , Nepal/epidemiología , Femenino , Masculino , Adulto , Atención Primaria de Salud/estadística & datos numéricos , Persona de Mediana Edad , Estudios Transversales , Prevalencia , Anciano , Adolescente , Adulto Joven , Depresión/epidemiología , Depresión/diagnóstico , Anciano de 80 o más AñosRESUMEN
[This corrects the article DOI: 10.1371/journal.pcbi.1008353.].
RESUMEN
Locusts are short horned grasshoppers that exhibit two behaviour types depending on their local population density. These are: solitarious, where they will actively avoid other locusts, and gregarious where they will seek them out. It is in this gregarious state that locusts can form massive and destructive flying swarms or plagues. However, these swarms are usually preceded by the aggregation of juvenile wingless locust nymphs. In this paper we attempt to understand how the distribution of food resources affect the group formation process. We do this by introducing a multi-population partial differential equation model that includes non-local locust interactions, local locust and food interactions, and gregarisation. Our results suggest that, food acts to increase the maximum density of locust groups, lowers the percentage of the population that needs to be gregarious for group formation, and decreases both the required density of locusts and time for group formation around an optimal food width. Finally, by looking at foraging efficiency within the numerical experiments we find that there exists a foraging advantage to being gregarious.
Asunto(s)
Conducta Apetitiva/fisiología , Conducta Alimentaria/fisiología , Saltamontes/fisiología , Modelos Biológicos , Animales , Biología Computacional , Aglomeración , Ninfa/fisiologíaRESUMEN
PURPOSE: Calibration of a radiotherapy electronic portal imaging device (EPID) using the pixel-sensitivity-map (PSM) in place of the flood field correction improves the utility of the EPID for quality assurance applications. Multiple methods are available for determining the PSM and this study provides an evaluation to inform on which is superior. METHODS: Three different empirical methods ("Calvary Mater Newcastle" [CMN], "Varian," and "WashU") and a Monte Carlo-based method of PSM determination were investigated on a single Varian TrueBeam STx linear accelerator (linac) with an aS1200 EPID panel. PSM measurements were performed for each empirical method three successive times using the 6 MV beam. The resulting PSM from each method was compared to the Monte Carlo method as a reference using 2D percentage deviation maps and histograms plus crossplane profiles. The repeatability of generated PSMs was also assessed via 2D standard deviation (SD) maps and histograms. Additionally, the Beam-Response generated by removal of the PSM from a raw EPID image for each method was visually contrasted. Finally, the practicality of each method was assessed qualitatively and via the measured time required to acquire and export the required images. RESULTS: The median pixel-by-pixel percentage deviation between each of the empirical PSM methods and the Monte Carlo PSM was -0.36%, 0.24%, and 0.74% for the CMN, Varian, and WashU methods, respectively. Ninety-five percent of pixels were found to be repeatable to within -0.21%, 0.08%, 0.19%, and 0.35% (1 SD) for the CMN, Monte Carlo, Varian, and WashU methods, respectively. The WashU method was found to be quickest for data acquisition and export and the CMN the slowest. CONCLUSION: For the first time four methods of generating the EPID PSM have been compared in detail and strengths and weaknesses of each method have been identified. All methods are considered likely to be clinically acceptable and with similar practical requirements.
Asunto(s)
Radioterapia de Intensidad Modulada , Calibración , Electrónica , Humanos , Método de Montecarlo , Aceleradores de Partículas , Radiometría/métodos , Dosificación Radioterapéutica , Radioterapia de Intensidad Modulada/métodosRESUMEN
PURPOSE: The EPID PSM is a useful EPID calibration method for QA applications. The dependence of the EPID PSM on the photon beam used to acquire it has been investigated in this study for the four available PSM methods. The aim is to inform upon the viability of applying a single PSM for all available photon beams to simplify PSM implementation and maintenance. METHODS: Four methods of PSM determination were each measured once in a single session on a single TrueBeam ® STx linac using 6 MV, 10 MV, 6 MV Flattening-Filter-Free (FFF), and 10 MV FFF photon beams. The resultant PSM was assessed for both intra- and inter-method beam dependence via comparison between PSM of the same method compared to the 6 MV PSM and via comparison between PSM of the same beam with the corresponding Monte Carlo PSM. Comparisons were performed via 2D percentage deviation plots with associated histograms, 1D crossplane profiles, and via mean, median, and standard deviation percentage deviation statistics. Generated beam-response was compared qualitatively via 1D crossplane profile comparison and quantitatively via symmetry assessment with comparison to the IC profiler device. RESULTS: The Varian method provided the most consistent PSM with varying photon beam, with median percent deviation from the 6 MV PSM within 0.14% for all other beams. Qualitatively, each method provided similar beam-response profiles. The measured beam-response symmetry agreed to within 0.2% between the Calvary Mater Newcastle (CMN) method and IC profiler, but agreement reduced to within 0.9% and 2.2% for the Varian and WashU methods. PSM percent deviation with Monte Carlo PSM was within 0.75% for all methods and beams. CONCLUSION: Results suggest that the PSM may be independent of photon beam to clinically relevant levels. The Varian method of PSM determination introduces the least beam dependence into the measured PSM.
Asunto(s)
Radioterapia de Intensidad Modulada , Electrónica , Humanos , Aceleradores de Partículas , Fantasmas de Imagen , Fotones , Radiometría/métodos , Dosificación Radioterapéutica , Radioterapia de Intensidad Modulada/métodosRESUMEN
Beam steering is the process of calibrating the angle and translational position with which a linear accelerator's (linac's) electron beam strikes the x-ray target with respect to the collimator rotation axis. The shape of the dose profile is highly dependent on accurate beam steering and is essential for ensuring correct delivery of the radiotherapy treatment plan. Traditional methods of beam steering utilize a scanning water tank phantom that makes the process user-dependent. This study is the first to provide a methodology for both beam angle steering and beam translational position steering based on EPID imaging of the beam and does not require a phantom. Both the EPID-based beam angle steering and beam translational steering methods described have been validated against IC Profiler measurement. Wide field symmetry agreement was found between the EPID and IC Profiler to within 0.06 ± 0.14% (1 SD) and 0.32 ± 0.11% (1 SD) for flattened and flattening-filter-free (FFF) beams, respectively. For a 1.1% change in symmetry measured by IC Profiler the EPID method agreed to within 0.23%. For beam translational position steering, the EPID method agreed with IC Profiler method to within 0.03 ± 0.05 mm (1 SD) at isocenter. The EPID-based methods presented are quick to perform, simple, accurate and could easily be integrated with the linac, potentially via the MPC application. The methods have the potential to remove user variability and to standardize the process of beam steering throughout the radiotherapy community.
Asunto(s)
Aceleradores de Partículas , Fantasmas de Imagen , Radiometría , Dosificación Radioterapéutica , Radioterapia de Intensidad Modulada , RotaciónRESUMEN
We consider a mixed finite element method for a linear multivariate spline using the Laplacian penalty. Our discretisation is based on biorthogonal systems leading to a very simple and efficient finite element scheme. We also extend our approach to a nonlinear case and describe a split Bregman iteration scheme for the resulting nonlinear equations. We apply our numerical schemes to remove the mixture of Gaussian and impulsive noise for some test images.â¢This paper presents a method of discretising a multivariate spline using a finite element method.â¢The method uses a biorthogonal system to achieve an efficient finite element method.â¢The method is extended to cover a discretisation scheme for a nonlinear case, including an adaptation of the split Bregman method for the nonlinear case.
RESUMEN
INTRODUCTION: In this study, we aimed to investigate the feasibility of gadoxetate low-temporal resolution (LTR) DCE-MRI for voxel-based hepatic extraction fraction (HEF) quantification for liver sparing radiotherapy using a deconvolution analysis (DA) method. METHODS: The accuracy and consistency of the deconvolution implementation in estimating liver function was first assessed using simulation data. Then, the method was applied to DCE-MRI data collected retrospectively from 64 patients (25 normal liver function and 39 cirrhotic patients) to generate HEF maps. The normal liver function patient data were used to measure the variability of liver function quantification. Next, a correlation between HEF and ALBI score (a new model for assessing the severity of liver dysfunction) was assessed using Pearson's correlation. Differences in HEF between Child-Pugh score classifications were assessed for significance using the Kruskal-Wallis test for all patient groups and Mann-Whitney U-test for inter-groups. A statistical significance was considered at a P-value <0.05 in all tests. RESULTS: The results showed that the implemented method accurately reproduced simulated liver function; root-mean-square error between estimated and simulated liver response functions was 0.003, and the coefficient-of-variance of HEF was <20%. HEF correlation with ALBI score was r = -0.517, P < 0.0001, and HEF was significantly decreased in the cirrhotic patients compared to normal patients (P < 0.0001). Also, HEF in Child-Pugh B/C was significantly lower than in Child-Pugh A (P = 0.024). CONCLUSION: The study demonstrated the feasibility of gadoxetate LTR-DCE MRI for voxel-based liver function quantification using DA. HEF could distinguish between different grades of liver function impairment and could potentially be used for functional guidance in radiotherapy.
Asunto(s)
Cirrosis Hepática , Neoplasias Hepáticas , Humanos , Estudios Retrospectivos , Cirrosis Hepática/diagnóstico por imagen , Imagen por Resonancia Magnética , Neoplasias Hepáticas/diagnóstico por imagen , Neoplasias Hepáticas/radioterapiaRESUMEN
This study assessed perception and experience of trained primary health care workers in using a mobile app-based version of the WHO mental health gap action programme (mhGAP) Intervention Guide in the assessment and management of people with mental health conditions in primary care in Nepal. A qualitative study was conducted with primary healthcare workers who were trained in using the WHO mhGAP mobile application in Jhapa, a district in eastern Nepal. Semi-structured interviews were carried out with 15 healthcare workers (3 females and 12 males) nine months after the training. Interviews were audio recorded, transcribed and translated into English for the thematic qualitative data analysis. Health care workers (HCWs) found the mobile app helpful to verify and confirm their assessment and diagnosis. The other benefits reported by the participants were: bringing uniformity in diagnosis and management of mental health conditions across primary healthcare facilities; reminding the HCWs specific assessment questions; creating awareness on the importance of psychosocial intervention; improving the interaction between patients and service providers; and the importance of follow-up care. Despite these advantages, lack of clarity about report submission modality; lack of electricity or internet connectivity; and low technology literacy among older HCWs were some of the barriers in using the app. The major recommendation made by the HCWs for the guide included revision of the assessment process and system; inclusion of a chat function with supervisors; minimizing the amount of patients' data to be collected in the app; and addition of conversion and anxiety disorders to the app. This study concludes that the mobile decision support application could be acceptable and feasible in primary care settings if the suggested modifications are incorporated, in addition to addressing other systemic issues facing the primary care-based delivery of mental health services.
RESUMEN
This paper describes the development process of a mobile app-based version of the World Health Organization mental health Gap Action Programme Intervention Guide, testing of the app prototypes, and its functionality in the assessment and management of people with mental health conditions in Nepal. Health workers' perception of feasibility and acceptability of using mobile technology in mental health care was assessed during the inspiration phase (N = 43); the ideation phase involved the creation of prototypes; and prototype testing was conducted over multiple rounds with 15 healthcare providers. The app provides provisional diagnoses and treatment options based on reported symptoms. Participants found the app prototype useful in reminding them of the process of assessment and management of mental disorders. Some challenges were noted, these included a slow app prototype with multiple technical problems, including difficulty in navigating 'yes'/'no' options, and there were challenges reviewing detailed symptoms of a particular disorder using a "more information" icon. The initial feasibility work suggests that if the technical issues are addressed, the e-mhGAP warrants further research to understand if it is a useful method in improving the detection of people with mental health conditions and initiation of evidence-based treatment in primary healthcare facilities.
RESUMEN
A novel pulsed neutron imaging technique based on the finite element method is used to reconstruct the residual strain within a polycrystalline material from Bragg edge strain images. This technique offers the possibility of a nondestructive analysis of strain fields with a high spatial resolution. The finite element approach used to reconstruct the strain uses the least square method constrained by the conditions of equilibrium. This inclusion of equilibrium makes the problem well-posed. The procedure is developed and verified by validating for a cantilevered beam problem. It is subsequently demonstrated by reconstructing the strain from experimental data for a ring-and-plug sample, measured at the spallation neutron source RADEN at J-PARC in Japan. The reconstruction is validated by comparison with conventional constant wavelength strain measurements on the KOWARI diffractometer at ANSTO in Australia. It is also shown that the addition of a Tikhonov regularisation scheme further improves the reconstruction.