RESUMEN
With the commercialization of first-generation flexible mobiles and displays in the late 2010s, humanity has stepped into the age of flexible electronics. Inevitably, soft multifunctional sensors, as essential components of next-generation flexible electronics, have attracted tremendous research interest like never before. This review is dedicated to offering an overview of the latest emerging trends in soft multifunctional sensors and their accordant future research and development (R&D) directions for the coming decade. First, key characteristics and the predominant target stimuli for soft multifunctional sensors are highlighted. Second, important selection criteria for soft multifunctional sensors are introduced. Next, emerging materials/structures and trends for soft multifunctional sensors are identified. Specifically, the future R&D directions of these sensors are envisaged based on their emerging trends, namely i) decoupling of multiple stimuli, ii) data processing, iii) skin conformability, and iv) energy sources. Finally, the challenges and potential opportunities for these sensors in future are discussed, offering new insights into prospects in the fast-emerging technology.
RESUMEN
Soft piezoresistive pressure sensors play an underpinning role in enabling a plethora of future Internet of Things (IoT) applications such as human-robot interaction (HRI) technologies, wearable devices, and metaverse ecosystems. Despite significant attempts to enhance the performance of these sensors, existing sensors still fall short of achieving high strain tolerance and linearity simultaneously. Herein, we present a low-cost, facile, and scalable approach to fabricating a highly strain-tolerant and linearly sensitive soft piezoresistive pressure sensor. Our design utilizes thin nanocracked gold films (NC-GFs) deposited on poly(dimethylsiloxane) (PDMS) as electrodes of the sensor. The large mismatch stress between gold (Au) and PDMS induces the formation of secondary wrinkles along the pyramidal-structured electrode under pressure; these wrinkles function as protuberances on the electrode and enable exceptional linear sensitivity of 4.2 kPa-1 over a wide pressure range. Additionally, our pressure sensor can maintain its performance even after severe mechanical deformations, including repeated stretching up to 30% strain, due to the outstanding strain tolerance of NC-GF. Our sensor's impressive sensing performance and mechanical robustness make it suitable for diverse IoT applications, as demonstrated by its use in wearable pulse monitoring devices and human-robot interaction systems.
Asunto(s)
Robótica , Dispositivos Electrónicos Vestibles , Humanos , Ecosistema , Monitoreo Fisiológico , OroRESUMEN
In the last decade, soft acoustic/vibration sensors have gained tremendous research interest due to their unique ability to detect broadband acoustic/vibration stimuli, potentializing futuristic applications including voice biometrics, voice-controlled human-machine-interfaces, electronic skin, and skin-mountable healthcare devices. Importantly, to benefit most from these sensors, it is inevitable to use machine learning (ML) to process their output signals; with ML, a more accurate and efficient interpretation of original data is possible. This paper is dedicated to offering an overview of recent advances empowering the development of soft acoustic/vibration sensors and their signal processing using ML. First, the key performance parameters of the sensors are discussed. Second, popular transduction mechanisms for the sensors are addressed, followed by an in-depth overview of each type, covering materials used, structural designs, and sensing performances. Third, potential applications of the sensors are elaborated and fourth, a thorough discussion on ML is conducted, exploring different types of ML, specific ML algorithms suitable for processing acoustic/vibration signals, and current trends in ML-assisted applications. Finally, the challenges and potential opportunities in soft acoustic/vibration sensor and ML research are revealed to offer new insights into future prospects in these fields.
RESUMEN
Following earlier research efforts dedicated to the realization of multifunctional sensing, recent developments of artificial skins endeavor to go beyond human sensory functions by integrating interactive visualization of strain and pressure stimuli. Inspired by the microcracked structure of spider slit organs and the mechanochromic mechanism of chameleons, this work aims to design a flexible optical/electrical skin (OE-skin) capable of responding to complex stimuli with interactive feedback of human-readable structural colors. The OE-skin consists of an ionic electrode combined with an elastomer dielectric layer, a chromotropic layer containing photonic crystals and a conductive carbon nanotube/MXene layer. The electrode/dielectric layers function as a capacitive pressure sensor. The mechanochromic photonic crystals of ferroferric oxide-carbon magnetic arrays embedded in the gelatin/polyacrylamide stretchable hydrogel film perceive strain and pressure stimuli with bright color switching outputs in the full visible spectrum. The underlying microcracked conductive layer is devoted to ultrasensitive strain sensing with a gauge factor of 191.8. The multilayered OE-skin delivers an ultrafast, accurate response for capacitive pressure sensing with a detection limit of 75 Pa and long-term stability of 5000 cycles, while visualizing complex deformations in the form of high-resolution spatial colors. These findings offer deep insights into the rational design of OE-skins as multifunctional sensing devices.
Asunto(s)
Dispositivos Electrónicos Vestibles , Humanos , Piel , Elastómeros , Conductividad EléctricaRESUMEN
With the mandate of worldwide carbon neutralization, pursuing comfortable living environment while consuming less energy is an enticing and unavoidable choice. Novel composite aerogels with super thermal insulation and high sunlight reflection are developed for energy-efficient buildings. A solvent-assisted freeze-casting strategy is used to produce boron nitride nanosheet/polyvinyl alcohol (BNNS/PVA) composite aerogels with a tailored alignment channel structure. The effects of acetone and BNNS fillers on microstructures and multifunctional properties of aerogels are investigated. The acetone in the PVA suspension enlarges the cell walls to suppress the shrinkage, giving rise to a lower density and a higher porosity, accompanied with much diminished heat conduction throughout the whole product. The addition of BNNS fillers creates whiskers in place of disconnected transverse ligaments between adjacent cell walls, further ameliorating the thermal insulation transverse to the cell wall direction. The resultant BNNS/PVA aerogel delivers an ultralow thermal conductivity of 23.5 mW m-1 K-1 in the transverse direction. The superinsulating aerogel presents both an infrared stealthy capability and a high solar reflectance of 93.8% over the whole sunlight wavelength, far outperforming commercial expanded polystyrene foams with reflective coatings. The anisotropic BNNS/PVA composite aerogel presents great potential for application in energy-saving buildings.
RESUMEN
Mechanochromic smart membranes capable of optical modulation have great potential in smart windows, artificial skins, and camouflage. However, the realization of high-contrast optical modulation based on light scattering activated at a low strain remains challenging. Here, we present a strategy for designing mechanochromic scattering membranes by introducing a Young's modulus mismatch between the two interdigitated polydimethylsiloxane phases with weak interfaces in a periodic three-dimensional (3D) structure. The refractive index-matched interfaces of the nanocomposite provide a high optical transparency of 93%. Experimental and computational studies reveal that the 3D heterogeneity facilitates the generation of numerous nanoscale debonds or "nanogaps" at the modulus-mismatching interfaces, enabling incident light scattering under tension. The heterogeneous scatterer delivers both a high transmittance contrast of >50% achieved at 15% strain and a maximum contrast of 82%. When used as a smart window, the membrane demonstrates effective diffusion of transmitting sunlight, leading to moderate indoor illumination by eliminating extremely bright or dark spots. At the other extreme, such a 3D heterogeneous design with strongly bonded interfaces can enhance the coloration sensitivity of mechanophore-dyed nanocomposites. This work presents insights into the design principles of advanced mechanochromic smart membranes.
RESUMEN
Cooling in buildings is vital to human well-being but inevitability consumes significant energy, adding pressure on achieving carbon neutrality. Thermally superinsulating aerogels are promising to isolate the heat for more energy-efficient cooling. However, most aerogels tend to absorb the sunlight for unwanted solar heat gain, and it is challenging to scale up the aerogel fabrication while maintaining consistent properties. Herein, we develop a thermally insulating, solar-reflective anisotropic cooling aerogel panel containing in-plane aligned pores with engineered pore walls using boron nitride nanosheets by an additive freeze-casting technique. The additive freeze-casting offers highly controllable and cumulative freezing dynamics for fabricating decimeter-scale aerogel panels with consistent in-plane pore alignments. The unique anisotropic thermo-optical properties of the nanosheets combined with in-plane pore channels enable the anisotropic cooling aerogel to deliver an ultralow out-of-plane thermal conductivity of 16.9 mW m-1 K-1 and a high solar reflectance of 97%. The excellent dual functionalities allow the anisotropic cooling aerogel to minimize both parasitic and solar heat gains when used as cooling panels under direct sunlight, achieving an up to 7 °C lower interior temperature than commercial silica aerogels. This work offers a new paradigm for the bottom-up fabrication of scalable anisotropic aerogels towards practical energy-efficient cooling applications.
RESUMEN
Flexible multidirectional strain sensors are crucial to accurately determining the complex strain states involved in emerging sensing applications. Although considerable efforts have been made to construct anisotropic structures for improved selective sensing capabilities, existing anisotropic sensors suffer from a trade-off between high sensitivity and high stretchability with acceptable linearity. Here, an ultrasensitive, highly selective multidirectional sensor is developed by rational design of functionally different anisotropic layers. The bilayer sensor consists of an aligned carbon nanotube (CNT) array assembled on top of a periodically wrinkled and cracked CNT-graphene oxide film. The transversely aligned CNT layer bridge the underlying longitudinal microcracks to effectively discourage their propagation even when highly stretched, leading to superior sensitivity with a gauge factor of 287.6 across a broad linear working range of up to 100% strain. The wrinkles generated through a pre-straining/releasing routine in the direction transverse to CNT alignment is responsible for exceptional selectivity of 6.3, to the benefit of accurate detection of loading directions by the multidirectional sensor. This work proposes a unique approach to leveraging the inherent merits of two cross-influential anisotropic structures to resolve the trade-off among sensitivity, selectivity, and stretchability, demonstrating promising applications in full-range, multi-axis human motion detection for wearable electronics and smart robotics.
RESUMEN
Continuous real-time measurement of body temperature using a wearable sensor is an essential part of human health monitoring. Electrospun aligned carbon nanofiber (ACNF) films are employed to assemble flexible temperature sensors. The temperature sensor prepared at a low carbonization temperature of 650 °C yields an outstanding sensitivity of 1.52% °C-1, high accuracy, good linearity, fast response time and excellent long-term durability. Moreover, it exhibits high discriminability towards temperature amidst other unwanted stimuli and maintains its original performance even after repeated stretch/release cycles because of highly-aligned structures. The correlation between the atomic structure and the temperature sensing performance of ACNF sensors is established. Contrary to conventional highly conductive temperature sensors, the ACNF sensor with a low electrical conductivity prepared at a low carbonization temperature ameliorates the temperature sensing performance. This anomaly is explained by (i) the smaller and more disordered sp2 carbon crystallites yielding a high negative temperature coefficient, (ii) a larger number of defects, and (iii) a higher pyridinic-N content generating abundant entrapped and localized electrons which are activated once sufficient thermal energy is available. Flexible ACNF sensor's overall performance is among the best-known carbon material-based flexible temperature sensors, demonstrating potential applications in emerging healthcare and flexible electronics technologies.
Asunto(s)
Nanofibras , Dispositivos Electrónicos Vestibles , Carbono , Conductividad Eléctrica , Humanos , TemperaturaRESUMEN
Advanced wearable strain sensors with high sensitivity and stretchability are an essential component of flexible and soft electronic devices. Conventional metal- and semiconductor-based strain sensors are rigid, fragile, and opaque, restricting their applications in wearable electronics. Graphene-based percolative structures possess high flexibility and transparency but lack high sensitivity and stretchability. Inspired by the highly flexible spider web architecture, we propose semitransparent, ultrasensitive, and wearable strain sensors made from an elastomer-filled graphene woven fabric (E-GWF) for monitoring human physiological signals. The highly flexible elastomer microskeleton and the hierarchical structure of a graphene tube offer the strain sensor with both excellent sensing and switching capabilities. Two different types of E-GWF sensors, including freestanding E-GWF and E-GWF/polydimethylsiloxane (PDMS) composites, are developed. When their structure is controlled and optimized, the E-GWF strain sensors simultaneously exhibit extraordinary characteristics, such as a high gauge factor (70 at 10% strain, which ascends to 282 at 20%) in respect to other semitransparent or transparent strain sensors, a broad sensing range up to 30%, and excellent linearity. The E-GWF/PDMS composite sensor shows a unique reversible switching behavior at a high strain level of 30-50%, making it a suitable material for fast and reversible strain switching required in many early warning systems. With a view to real-world applications of these sensors and switches, we demonstrate human motion detection and switch controls of light-emitting-diode lamps and liquid-crystal-display circuits. Their unique structure and capabilities can find a wide range of practical applications, such as health monitoring, medical diagnosis, early warning systems for structural failure, and wearable displays.