A pelvic kinematic approach for calculating hip angles for active hip disarticulation prosthesis control.

BACKGROUND: Control system design for a microprocessor-controlled hip-knee-ankle-foot (HKAF) prosthesis is a challenge since hip disarticulation amputees lack the entire leg and, therefore, only have pelvis movement as user-guided input. This research proposes a method for determining hip joint angles from pelvis movement in a control system for the next generation of powered prostheses. METHOD: Three-dimensional pelvic motion and stance time of 10 transfemoral (TF) prosthetic users were used to identify important features and to develop an algorithm to calculate hip angles from pelvis movement based on correlation and linear regression results. The algorithm was then applied to a separate (independent) TF group to validate algorithm performance. RESULTS: The proposed algorithm calculated viable hip angles during walking by utilizing pelvic rotation, pelvic tilt, and stance time. Small angular differences were found between the algorithm results and motion capture data. The greatest difference was for hip maximum extension angle (2.5 ± 2.0°). CONCLUSIONS: Since differences between algorithm output and motion data were within participant standard deviations, the developed algorithm could be used to determine the desired hip angle from pelvis movements. This study will aid the future development of gait control systems for new active HKAF prostheses.

Automated Implementation of the Edinburgh Visual Gait Score (EVGS) Using OpenPose and Handheld Smartphone Video.

Recent advancements in computing and artificial intelligence (AI) make it possible to quantitatively evaluate human movement using digital video, thereby opening the possibility of more accessible gait analysis. The Edinburgh Visual Gait Score (EVGS) is an effective tool for observational gait analysis, but human scoring of videos can take over 20 min and requires experienced observers. This research developed an algorithmic implementation of the EVGS from handheld smartphone video to enable automatic scoring. Participant walking was video recorded at 60 Hz using a smartphone, and body keypoints were identified using the OpenPose BODY25 pose estimation model. An algorithm was developed to identify foot events and strides, and EVGS parameters were determined at relevant gait events. Stride detection was accurate within two to five frames. The level of agreement between the algorithmic and human reviewer EVGS results was strong for 14 of 17 parameters, and the algorithmic EVGS results were highly correlated (r > 0.80, "r" represents the Pearson correlation coefficient) to the ground truth values for 8 of the 17 parameters. This approach could make gait analysis more accessible and cost-effective, particularly in areas without gait assessment expertise. These findings pave the way for future studies to explore the use of smartphone video and AI algorithms in remote gait analysis.

Amputee Fall Risk Classification Using Machine Learning and Smartphone Sensor Data from 2-Minute and 6-Minute Walk Tests.

The 6-min walk test (6MWT) is commonly used to assess a person's physical mobility and aerobic capacity. However, richer knowledge can be extracted from movement assessments using artificial intelligence (AI) models, such as fall risk status. The 2-min walk test (2MWT) is an alternate assessment for people with reduced mobility who cannot complete the full 6MWT, including some people with lower limb amputations; therefore, this research investigated automated foot strike (FS) detection and fall risk classification using data from a 2MWT. A long short-term memory (LSTM) model was used for automated foot strike detection using retrospective data (n = 80) collected with the Ottawa Hospital Rehabilitation Centre (TOHRC) Walk Test app during a 6-min walk test (6MWT). To identify FS, an LSTM was trained on the entire six minutes of data, then re-trained on the first two minutes of data. The validation set for both models was ground truth FS labels from the first two minutes of data. FS identification with the 6-min model had 99.2% accuracy, 91.7% sensitivity, 99.4% specificity, and 82.7% precision. The 2-min model achieved 98.0% accuracy, 65.0% sensitivity, 99.1% specificity, and 68.6% precision. To classify fall risk, a random forest model was trained on step-based features calculated using manually labeled FS and automated FS identified from the first two minutes of data. Automated FS from the first two minutes of data correctly classified fall risk for 61 of 80 (76.3%) participants; however, <50% of participants who fell within the past six months were correctly classified. This research evaluated a novel method for automated foot strike identification in lower limb amputee populations that can be applied to both 6MWT and 2MWT data to calculate stride parameters. Features calculated using automated FS from two minutes of data could not sufficiently classify fall risk in lower limb amputees.

Preliminary Material Evaluation of Flax Fibers for Prosthetic Socket Fabrication.

Composite prosthetic sockets are typically made of fiberglass or carbon fiber. These fibers have good mechanical properties, but relatively poor vibration damping. Flax fibers are claimed to have exceptional vibration damping properties, with the added benefit of being a natural renewable resource and a cost-effective alternative to synthetic fibers. Flax fibers could prove beneficial for prosthetic sockets, providing lightweight sockets that reduce vibrations transmitted to the body during movement. This research used impact testing (impulse hammer and custom drop tower) on flat and socket shaped composite samples to evaluate composite layer options. Sample vibration dissipation was measured by a combination of accelerometers, load cells, and a dynamometer. Composite sockets made purely of flax fibers were lighter and more efficient at damping vibrations, reducing the amplification of vibrations by a factor of nearly four times better than sockets made purely of carbon fiber. However, the bending stiffness, elastic moduli, and flexural strength of flax sockets fabricated using the traditional socket manufacturing method were found to be ten times lower than theoretical values of flax composites found in the literature. By increasing fiber volume fraction when using the traditional socket manufacturing method, the composite's mechanical properties, namely, vibration damping, could improve and flax fiber benefits could be explored further.

Prediction and detection of freezing of gait in Parkinson's disease from plantar pressure data using long short-term memory neural-networks.

BACKGROUND: Freezing of gait (FOG) is a walking disturbance in advanced stage Parkinson's disease (PD) that has been associated with increased fall risk and decreased quality of life. Freezing episodes can be mitigated or prevented with external intervention such as visual or auditory cues, activated by FOG prediction and detection systems. While most research on FOG detection and prediction has been based on inertial measurement unit (IMU) and accelerometer data, plantar-pressure data may capture subtle weight shifts unique to FOG episodes. Different machine learning algorithms have been used for FOG detection and prediction; however, long short-term memory (LSTM) deep learning methods hold an advantage when dealing with time-series data, such as sensor data. This research aimed to determine if LSTM can be used to detect and predict FOG from plantar pressure data alone, specifically for use in a real-time wearable system. METHODS: Plantar pressure data were collected from pressure-sensing insole sensors worn by 11 participants with PD as they walked a predefined freeze-provoking path. FOG instances were labelled, 16 features were extracted, and the dataset was balanced and normalized (z-score). The resulting datasets were classified using long short-term memory neural-network models. Separate models were trained for detection and prediction. For prediction models, data before FOG were included in the target class. Leave-one-freezer-out cross validation was used for model evaluation. In addition, the models were tested on all non-freezer data to determine model specificity. RESULTS: The best FOG detection model had 82.1% (SD 6.2%) mean sensitivity and 89.5% (SD 3.6%) mean specificity for one-freezer-held-out cross validation. Specificity improved to 93.3% (SD 4.0%) when ignoring inactive state data (standing) and analyzing the model only on active states (turning and walking). The model correctly detected 95% of freeze episodes. The best FOG prediction method achieved 72.5% (SD 13.6%) mean sensitivity and 81.2% (SD 6.8%) mean specificity for one-freezer-held-out cross validation. CONCLUSIONS: Based on FOG data collected in a laboratory, the results suggest that plantar pressure data can be used for FOG detection and prediction. However, further research is required to improve FOG prediction performance, including training with a larger sample of people who experience FOG.

Comparison of Decision Tree and Long Short-Term Memory Approaches for Automated Foot Strike Detection in Lower Extremity Amputee Populations.

Foot strike detection is important when evaluating a person's gait characteristics. Accelerometer and gyroscope signals from smartphones have been used to train artificial intelligence (AI) models for automated foot strike detection in able-bodied and elderly populations. However, there is limited research on foot strike detection in lower limb amputees, who have a more variable and asymmetric gait. A novel method for automated foot strike detection in lower limb amputees was developed using raw accelerometer and gyroscope signals collected from a smartphone positioned at the posterior pelvis. Raw signals were used to train a decision tree model and long short-term memory (LSTM) model for automated foot strike detection. These models were developed using retrospective data (n = 72) collected with the TOHRC Walk Test app during a 6-min walk test (6MWT). An Android smartphone was placed on a posterior belt for each participant during the 6MWT to collect accelerometer and gyroscope signals at 50 Hz. The best model for foot strike identification was the LSTM with 100 hidden nodes in the LSTM layer, 50 hidden nodes in the dense layer, and a batch size of 64 (99.0% accuracy, 86.4% sensitivity, 99.4% specificity, and 83.7% precision). This research created a novel method for automated foot strike identification in lower extremity amputee populations that is equivalent to manual labelling and accessible for clinical use. Automated foot strike detection is required for stride analysis and to enable other AI applications, such as fall detection.

Early Detection of Freezing of Gait during Walking Using Inertial Measurement Unit and Plantar Pressure Distribution Data.

Freezing of gait (FOG) is a sudden and highly disruptive gait dysfunction that appears in mid to late-stage Parkinson's disease (PD) and can lead to falling and injury. A system that predicts freezing before it occurs or detects freezing immediately after onset would generate an opportunity for FOG prevention or mitigation and thus enhance safe mobility and quality of life. This research used accelerometer, gyroscope, and plantar pressure sensors to extract 861 features from walking data collected from 11 people with FOG. Minimum-redundancy maximum-relevance and Relief-F feature selection were performed prior to training boosted ensembles of decision trees. The binary classification models identified Total-FOG or No FOG states, wherein the Total-FOG class included data windows from 2 s before the FOG onset until the end of the FOG episode. Three feature sets were compared: plantar pressure, inertial measurement unit (IMU), and both plantar pressure and IMU features. The plantar-pressure-only model had the greatest sensitivity and the IMU-only model had the greatest specificity. The best overall model used the combination of plantar pressure and IMU features, achieving 76.4% sensitivity and 86.2% specificity. Next, the Total-FOG class components were evaluated individually (i.e., Pre-FOG windows, Freeze windows, transition windows between Pre-FOG and Freeze). The best model detected windows that contained both Pre-FOG and FOG data with 85.2% sensitivity, which is equivalent to detecting FOG less than 1 s after the freeze began. Windows of FOG data were detected with 93.4% sensitivity. The IMU and plantar pressure feature-based model slightly outperformed models that used data from a single sensor type. The model achieved early detection by identifying the transition from Pre-FOG to FOG while maintaining excellent FOG detection performance (93.4% sensitivity). Therefore, if used as part of an intelligent, real-time FOG identification and cueing system, even if the Pre-FOG state were missed, the model would perform well as a freeze detection and cueing system that could improve the mobility and independence of people with PD during their daily activities.

Classification of Aggressive Movements Using Smartwatches.

Recognizing aggressive movements is a challenging task in human activity recognition. Wearable smartwatch technology with machine learning may be a viable approach for human aggressive behavior classification. This research identified a viable classification model and feature selector (CM-FS) combination for separating aggressive from non-aggressive movements using smartwatch data and determined if only one smartwatch is sufficient for this task. A ranking method was used to select relevant CM-FS models across accuracy, sensitivity, specificity, precision, F-score, and Matthews correlation coefficient (MCC). The Waikato environment for knowledge analysis (WEKA) was used to run 6 machine learning classifiers (random forest, k-nearest neighbors (kNN), multilayer perceptron neural network (MP), support vector machine, naïve Bayes, decision tree) coupled with three feature selectors (ReliefF, InfoGain, Correlation). Microsoft Band 2 accelerometer and gyroscope data were collected during an activity circuit that included aggressive (punching, shoving, slapping, shaking) and non-aggressive (clapping hands, waving, handshaking, opening/closing a door, typing on a keyboard) tasks. A combination of kNN and ReliefF was the best CM-FS model for separating aggressive actions from non-aggressive actions, with 99.6% accuracy, 98.4% sensitivity, 99.8% specificity, 98.9% precision, 0.987 F-score, and 0.984 MCC. kNN and random forest classifiers, combined with any of the feature selectors, generated the top models. Models with naïve Bayes or support vector machines had poor performance for sensitivity, F-score, and MCC. Wearing the smartwatch on the dominant wrist produced the best single-watch results. The kNN and ReliefF combination demonstrated that this smartwatch-based approach is a viable solution for identifying aggressive behavior. This wrist-based wearable sensor approach could be used by care providers in settings where people suffer from dementia or mental health disorders, where random aggressive behaviors often occur.

The effect of surface inclination and limb on knee loading measures in transtibial prosthesis users.

BACKGROUND: Osteoarthritis (OA) is a degenerative disease caused by the wearing of joint cartilage and bone. Literature has established that a prosthesis user's intact limb is at greater risk of developing OA. This study analyzed the effect of commonly encountered surface inclinations on knee joint loading measures in able-bodied and transtibial prosthesis users. METHODS: 12 transtibial prosthesis users and 12 able-bodied participants walked across level ground, up slope, down slope, and cross slope (further divided into top and bottom slope depending on the location of the limb being analyzed). First and second peak external knee adduction moment (KAM), external knee adduction moment rate, and external knee adduction moment impulse were extracted from the stance phase of gait. Mixed ANOVA statistics with Bonferonni post hoc analyses were performed. RESULTS: Significant limb differences were only found for KAM rate and first peak KAM. When compared to all other surfaces up slope had the significantly lowest KAM rate and was not significantly lower for all other tested variables. Down slope had significantly greater KAM rate than all surfaces except bottom slope. KAM second peak and KAM impulse analysis resulted in no significant differences. CONCLUSIONS: Individuals at risk for developing, or currently dealing with, knee OA could avoid walking for extended periods on down slope. Walking up moderate slopes may be considered as a complementary activity to level walking for rehabilitation and delaying OA progression. The lack of significant limb differences suggests that second peak KAM and KAM impulse may not be appropriate load-related indicators of OA initiation among prosthesis users without OA. KAM rate was the most sensitive joint loading variable and therefore should be investigated further as an appropriate variable for identifying OA risk in individuals with transtibial amputations.

Design, development, and evaluation of a local sensor-based gait phase recognition system using a logistic model decision tree for orthosis-control.

BACKGROUND: Functionality and versatility of microprocessor-controlled stance-control knee-ankle-foot orthoses (M-SCKAFO) are dictated by their embedded control systems. Proper gait phase recognition (GPR) is required to enable these devices to provide sufficient knee-control at the appropriate time, thereby reducing the incidence of knee-collapse and fall events. Ideally, the M-SCKAFO sensor system would be local to the thigh and knee, to facilitate innovative orthosis designs that allow more flexibility for ankle joint selection and other orthosis components. We hypothesized that machine learning with local sensor signals from the thigh and knee could effectively distinguish gait phases across different walking conditions (i.e., surface levels, walking speeds) and that performance would improve with gait phase transition criteria (i.e., current states depend on previous states). METHODS: A logistic model decision tree (LMT) classifier was trained and tested (five-fold cross-validation) on gait data that included knee flexion angle, thigh-segment angular velocity, and thigh-segment acceleration. Twenty features were extracted from 0.1 s sliding windows for 30 able-bodied participants that walked on different surfaces (level, down-slope, up-slope, right cross-slope, left cross-slope) at a various walking speeds (self-paced (1.33 m/s, SD = 0.04 m/s), 0.8, 0.6, 0.4 m/s). The LMT-based GPR model was also tested with another validation set containing similar features and surfaces from 12 able-bodied volunteers at self-paced walking speeds (1.41 m/s, SD = 0.34 m/s). A "Transition Sequence Verification and Correction" (TSVC) algorithm was applied to correct for continuous class prediction and to improve GPR performance. RESULTS: The LMT had a tree size of 1643 with 822 leaf nodes, with a logistic regression model at each leaf node. The local sensor LMT-based GPR model identified loading response, push-off, swing, and terminal swing phases with overall classification accuracy of 98.38 for the initial training set (five-fold cross-validation) and 90.60% for the validation set. Applying TSVC increased classification accuracy to 98.72% for the initial training set and 98.61% for the validation set. Sensitivity, specificity, precision, F-score, and Matthew's correlation coefficient results suggest strong evidence for the feasibility of an LMT-based GPR system for real-time orthosis control. CONCLUSIONS: The novel machine learning GPR model that used sensor features local to the thigh and knee was viable for dynamic knee-ankle-foot orthosis-control. This highly accurate GPR model was generalizable when combined with TSVC. Our approach could reduce sensor system complexity as compared with other M-SCKAFO approaches, thereby enabling customizable advantages for end-users through modular unit orthosis designs.

Wearable-Sensor-based Detection and Prediction of Freezing of Gait in Parkinson's Disease: A Review.

Freezing of gait (FOG) is a serious gait disturbance, common in mid- and late-stage Parkinson's disease, that affects mobility and increases fall risk. Wearable sensors have been used to detect and predict FOG with the ultimate aim of preventing freezes or reducing their effect using gait monitoring and assistive devices. This review presents and assesses the state of the art of FOG detection and prediction using wearable sensors, with the intention of providing guidance on current knowledge, and identifying knowledge gaps that need to be filled and challenges to be considered in future studies. This review searched the Scopus, PubMed, and Web of Science databases to identify studies that used wearable sensors to detect or predict FOG episodes in Parkinson's disease. Following screening, 74 publications were included, comprising 68 publications detecting FOG, seven predicting FOG, and one in both categories. Details were extracted regarding participants, walking task, sensor type and body location, detection or prediction approach, feature extraction and selection, classification method, and detection and prediction performance. The results showed that increasingly complex machine-learning algorithms combined with diverse feature sets improved FOG detection. The lack of large FOG datasets and highly person-specific FOG manifestation were common challenges. Transfer learning and semi-supervised learning were promising for FOG detection and prediction since they provided person-specific tuning while preserving model generalization.

Ultrasonic Tethering to Enable Side-by-Side Following for Powered Wheelchairs.

In social situations, people who use a powered wheelchair must divide their attention between navigating the chair and conversing with people. These conversations could lead to increased mental stress when navigating and distraction from maneuvering the chair. As a solution that maintains a good conversation distance between the wheelchair and the accompanying person (Social Following), a wheelchair control system was developed to provide automated side-by-side following by wirelessly connecting the wheelchair to the person. Two ultrasonic range sensors and three piezoelectric ultrasonic transducers were used to identify the accompanying person and determine their position and heading. Identification involved an ultrasonic beacon worn on the person's side, at hip level, and receivers on the wheelchair. A drive control algorithm maintained a constant conversation distance along the person's trajectory. A plug-and-play prototype was developed and connected to a Permobil F5 Corpus wheelchair with a modified Eightfold Technologies SmartChair Remote. Results demonstrated that the system can navigate a wheelchair based on the accompanying person's trajectory, which is advantageous for users who require hands-free wheelchair control during social activities.

Dual-Task Elderly Gait of Prospective Fallers and Non-Fallers: A Wearable-Sensor Based Analysis.

Wearable sensors could facilitate point of care, clinically feasible assessments of dynamic stability and associated fall risk through an assessment of single-task (ST) and dual-task (DT) walking. This study investigated gait changes between ST and DT walking and between older adult prospective fallers and non-fallers. The results were compared to a study based on retrospective fall occurrence. Seventy-five individuals (75.2 ± 6.6 years; 47 non-fallers, 28 fallers; 6 month prospective fall occurrence) walked 7.62 m under ST and DT conditions while wearing pressure-sensing insoles and accelerometers at the head, pelvis, and on both shanks. DT-induced gait changes included changes in temporal measures, centre of pressure (CoP) path stance deviations and coefficient of variation, acceleration descriptive statistics, Fast Fourier Transform (FFT) first quartile, ratio of even to odd harmonics, and maximum Lyapunov exponent. Compared to non-fallers, prospective fallers had significantly lower DT anterior⁻posterior CoP path stance coefficient of variation, DT head anterior⁻posterior FFT first quartile, ST left shank medial⁻lateral FFT first quartile, and ST right shank superior maximum acceleration. DT-induced gait changes were consistent regardless of faller status or when the fall occurred (retrospective or prospective). Gait differences between fallers and non-fallers were dependent on retrospective or prospective faller identification.

Feature selection for elderly faller classification based on wearable sensors.

BACKGROUND: Wearable sensors can be used to derive numerous gait pattern features for elderly fall risk and faller classification; however, an appropriate feature set is required to avoid high computational costs and the inclusion of irrelevant features. The objectives of this study were to identify and evaluate smaller feature sets for faller classification from large feature sets derived from wearable accelerometer and pressure-sensing insole gait data. METHODS: A convenience sample of 100 older adults (75.5 ± 6.7 years; 76 non-fallers, 24 fallers based on 6 month retrospective fall occurrence) walked 7.62 m while wearing pressure-sensing insoles and tri-axial accelerometers at the head, pelvis, left and right shanks. Feature selection was performed using correlation-based feature selection (CFS), fast correlation based filter (FCBF), and Relief-F algorithms. Faller classification was performed using multi-layer perceptron neural network, naïve Bayesian, and support vector machine classifiers, with 75:25 single stratified holdout and repeated random sampling. RESULTS: The best performing model was a support vector machine with 78% accuracy, 26% sensitivity, 95% specificity, 0.36 F1 score, and 0.31 MCC and one posterior pelvis accelerometer input feature (left acceleration standard deviation). The second best model achieved better sensitivity (44%) and used a support vector machine with 74% accuracy, 83% specificity, 0.44 F1 score, and 0.29 MCC. This model had ten input features: maximum, mean and standard deviation posterior acceleration; maximum, mean and standard deviation anterior acceleration; mean superior acceleration; and three impulse features. The best multi-sensor model sensitivity (56%) was achieved using posterior pelvis and both shank accelerometers and a naïve Bayesian classifier. The best single-sensor model sensitivity (41%) was achieved using the posterior pelvis accelerometer and a naïve Bayesian classifier. CONCLUSIONS: Feature selection provided models with smaller feature sets and improved faller classification compared to faller classification without feature selection. CFS and FCBF provided the best feature subset (one posterior pelvis accelerometer feature) for faller classification. However, better sensitivity was achieved by the second best model based on a Relief-F feature subset with three pressure-sensing insole features and seven head accelerometer features. Feature selection should be considered as an important step in faller classification using wearable sensors.

Faller Classification in Older Adults Using Wearable Sensors Based on Turn and Straight-Walking Accelerometer-Based Features.

Faller classification in elderly populations can facilitate preventative care before a fall occurs. A novel wearable-sensor based faller classification method for the elderly was developed using accelerometer-based features from straight walking and turns. Seventy-six older individuals (74.15 ± 7.0 years), categorized as prospective fallers and non-fallers, completed a six-minute walk test with accelerometers attached to their lower legs and pelvis. After segmenting straight and turn sections, cross validation tests were conducted on straight and turn walking features to assess classification performance. The best "classifier model-feature selector" combination used turn data, random forest classifier, and select-5-best feature selector (73.4% accuracy, 60.5% sensitivity, 82.0% specificity, and 0.44 Matthew's Correlation Coefficient (MCC)). Using only the most frequently occurring features, a feature subset (minimum of anterior-posterior ratio of even/odd harmonics for right shank, standard deviation (SD) of anterior left shank acceleration SD, SD of mean anterior left shank acceleration, maximum of medial-lateral first quartile of Fourier transform (FQFFT) for lower back, maximum of anterior-posterior FQFFT for lower back) achieved better classification results, with 77.3% accuracy, 66.1% sensitivity, 84.7% specificity, and 0.52 MCC score. All classification performance metrics improved when turn data was used for faller classification, compared to straight walking data. Combining turn and straight walking features decreased performance metrics compared to turn features for similar classifier model-feature selector combinations.

Novel algorithm for a smartphone-based 6-minute walk test application: algorithm, application development, and evaluation.

BACKGROUND: The 6-minute walk test (6MWT: the maximum distance walked in 6 minutes) is used by rehabilitation professionals as a measure of exercise capacity. Today's smartphones contain hardware that can be used for wearable sensor applications and mobile data analysis. A smartphone application can run the 6MWT and provide typically unavailable biomechanical information about how the person moves during the test. METHODS: A new algorithm for a calibration-free 6MWT smartphone application was developed that uses the test's inherent conditions and smartphone accelerometer-gyroscope data to report the total distance walked, step timing, gait symmetry, and walking changes over time. This information is not available with a standard 6MWT and could help with clinical decision-making. The 6MWT application was evaluated with 15 able-bodied participants. A BlackBerry Z10 smartphone was worn on a belt at the mid lower back. Audio from the phone instructed the person to start and stop walking. Digital video was independently recorded during the trial as a gold-standard comparator. RESULTS: The average difference between smartphone and gold standard foot strike timing was 0.014 ± 0.015 s. The total distance calculated by the application was within 1 m of the measured distance for all but one participant, which was more accurate than other smartphone-based studies. CONCLUSIONS: These results demonstrated that clinically relevant 6MWT results can be achieved with typical smartphone hardware and a novel algorithm.

Design and prototype validation of a laterally mounted powered hip joint prothesis.

Prosthetic technology has advanced with the development of powered prostheses to enhance joint function and movement in the absence of native anatomy. However, there are no powered solutions available for hip-level amputees, and most existing hip prostheses are mounted to the front of the prosthetic socket, thereby limiting range of motion. This research introduces a novel laterally mounted powered hip joint (LMPHJ) that augments user movement. The LMPHJ is mounted on the lateral side of the prosthetic socket, positioning the hip joint closer to the anatomical center of rotation while ensuring user safety and stability. The motor and electronics are located in the thigh area, maintaining a low profile while transmitting the required hip moment to the mechanical joint center of rotation. A prototype was designed and manufactured, and static testing was complete by modifying the loading conditions defined in the ISO 15032:2000 standard to failure test levels for a 100 kg person, demonstrating the joint's ability to withstand everyday loading conditions. Functional testing was conducted using a prosthesis simulator that enabled able-bodied participants to successfully walk with the powered prosthesis on level ground. This validates the mechanical design for walking and indicates the LMPHJ is ready for evaluation in the next phase with hip disarticulation amputee participants.

Review of fall risk assessment in geriatric populations using inertial sensors.

BACKGROUND: Falls are a prevalent issue in the geriatric population and can result in damaging physical and psychological consequences. Fall risk assessment can provide information to enable appropriate interventions for those at risk of falling. Wearable inertial-sensor-based systems can provide quantitative measures indicative of fall risk in the geriatric population. METHODS: Forty studies that used inertial sensors to evaluate geriatric fall risk were reviewed and pertinent methodological features were extracted; including, sensor placement, derived parameters used to assess fall risk, fall risk classification method, and fall risk classification model outcomes. RESULTS: Inertial sensors were placed only on the lower back in the majority of papers (65%). One hundred and thirty distinct variables were assessed, which were categorized as position and angle (7.7%), angular velocity (11.5%), linear acceleration (20%), spatial (3.8%), temporal (23.1%), energy (3.8%), frequency (15.4%), and other (14.6%). Fallers were classified using retrospective fall history (30%), prospective fall occurrence (15%), and clinical assessment (32.5%), with 22.5% using a combination of retrospective fall occurrence and clinical assessments. Half of the studies derived models for fall risk prediction, which reached high levels of accuracy (62-100%), specificity (35-100%), and sensitivity (55-99%). CONCLUSIONS: Inertial sensors are promising sensors for fall risk assessment. Future studies should identify fallers using prospective techniques and focus on determining the most promising sensor sites, in conjunction with determination of optimally predictive variables. Further research should also attempt to link predictive variables to specific fall risk factors and investigate disease populations that are at high risk of falls.

Development of an Integrated Powered Hip and Microprocessor-Controlled Knee for a Hip-Knee-Ankle-Foot Prosthesis.

Hip-knee-ankle-foot prostheses (HKAF) are full lower-limb devices for people with hip amputations that enable individuals to regain their mobility and move freely within their chosen environment. HKAFs typically have high rejection rates among users, as well as gait asymmetry, increased trunk anterior-posterior lean, and increased pelvic tilt. A novel integrated hip-knee (IHK) unit was designed and evaluated to address the limitations of existing solutions. This IHK combines powered hip and microprocessor-controlled knee joints into one structure, with shared electronics, sensors, and batteries. The unit is also adjustable to user leg length and alignment. ISO-10328:2016 standard mechanical proof load testing demonstrated acceptable structural safety and rigidity. Successful functional testing involved three able-bodied participants walking with the IHK in a hip prosthesis simulator. Hip, knee, and pelvic tilt angles were recorded and stride parameters were analyzed from video recordings. Participants were able to walk independently using the IHK and data showed that participants used different walking strategies. Future development of the thigh unit should include completion of a synergistic gait control system, improved battery-holding mechanism, and amputee user testing.

Design and evaluation of a hip prosthesis simulator: A technical note.

People with a limb loss at the level of the hip or pelvis have the most difficulty returning to walking compared with those with a lower amputation. This is because their prosthesis must replace the hip, knee, and ankle joints. An adjustable hip-disarticulation/hemipelvectomy prosthesis simulator that allows able-bodied individuals to wear and assess a prosthesis can help researchers and manufacturers when designing new prosthetic components (ie, hip joints). SolidWorks computer-aided design software was used to design and simulate an adapter that can connect prosthetic components to an off-the-shelf hip abduction orthosis. The adapter was made of 1020 stainless steel and aluminium 6061-T3 with a yield strength of 276 MPa. To confirm that this adapter is strong and safe for ambulation, mechanical testing was performed using an INSTRON machine. The maximum loads generated in any activity were chosen according to the International Organization for Standardization 15032:2000 standard for hip disarticulation external prostheses. The designed adapter allowed frontal, lateral, or distal mounting of different prosthetic hip joints. Mechanical testing confirmed that the new adapter can withstand forces and moments experienced during ambulation. The hip disarticulation/hemipelvectomy prosthesis simulator is easy to use and adjustable based on each person's height and pelvic width. Furthermore, this simulator would assist rehabilitation practitioners in experiencing the use of hip-level prostheses and give them a better understanding of people using such technologies. The next step in this project is to evaluate able-bodied participant gait while using this hip simulator prosthesis with different hip joints.