Adaptive Force Field Parameter Optimization for Expanding Reaction Simulations within Wide-Ranged Temperature.

Large-scale and long-term simulation of chemical reactions are key research topics in computational chemistry. However, there are still difficulties in simulating high-temperature reactions, such as polymer thermal decomposition. Herein, we introduce an adaptive potential parameter optimization framework designed to automatically fine-tune parameters, and the application of it to optimize ReaxFF parameters enhances the accuracy of chemical reaction simulations conducted at experimental temperatures. To achieve this, we leverage the power of Random Forests and interpretable machine learning techniques that enable the identification and selection of parameters that exert a substantial influence on the target attribute. By training deep neural network (NN) models, we established optimized parameter associations with reference properties. We train deep neural network (NN) models to establish the relationship between the optimized parameters and reference properties. We employ a Genetic Algorithm (GA) to utilize the surrogate NN model and the quantum mechanical targets to speed up the search for the optimal parameters. Our simulation results of resin pyrolysis show that the adaptive optimized ReaxFF can predict the peak temperature more accurately and obtain reasonable product composition under conditions that more closely resemble experimental scenarios. This work facilitates advances in force field parameter optimization for more accurate and universal reaction simulations.

Resistance risk, resistance mechanism and the effect on DON production of a new SDHI fungicide cyclobutrifluram in Fusarium graminearum.

Fusarium head blight in wheat is caused by Fusarium graminearum, resulting in significant yield losses and grain contamination with deoxynivalenol (DON), which poses a potential threat to animal health. Cyclobutrifluram, a newly developed succinate dehydrogenase inhibitor, has shown excellent inhibition of Fusarium spp. However, the resistance risk of F. graminearum to cyclobutrifluram and the molecular mechanism of resistance have not been determined. In this study, we established the average EC50 of a range of F. graminearum isolates to cyclobutrifluram to be 0.0110 µg/mL. Six cyclobutrifluram-resistant mutants were obtained using fungicide adaptation. All mutants exhibited impaired fitness relative to their parental isolates. This was evident from measurements of mycelial growth, conidiation, conidial germination, virulence, and DON production. Interestingly, cyclobutrifluram did not seem to affect the DON production of either the sensitive isolates or the resistant mutants. Furthermore, a positive cross-resistance was observed between cyclobutrifluram and pydiflumetofen. These findings suggest that F. graminearum carries a moderate to high risk of developing resistance to cyclobutrifluram. Additionally, point mutations H248Y in FgSdhB and A73V in FgSdhC1 of F. graminearum were observed in the cyclobutrifluram-resistant mutants. Finally, an overexpression transformation assay and molecular docking indicated that FgSdhBH248Y or FgSdhC1A73V could confer resistance of F. graminearum to cyclobutrifluram.

Resistance risk assessment of mefentrifluconazole in Corynespora cassiicola and the control of cucumber target spot by a two-way mixture of mefentrifluconazole and prochloraz.

The cucumber target spot, caused by Corynespora cassiicola, is a major cucumber disease in China. Mefentrifluconazole, a new triazole fungicide, exhibits remarkable efficacy in controlling cucumber target spot. However, the resistance risk and mechanism remain unclear. In this study, the inhibitory activity of mefentrifluconazole against 101 C. cassiicola isolates was determined, and the results indicated that the EC50 values ranged between 0.15 and 12.85 µg/mL, with a mean of 4.76 µg/mL. Fourteen mefentrifluconazole-resistant mutants of C. cassiicola were generated from six parental isolates in the laboratory through fungicide adaptation or UV irradiation. The resistance was relatively stable after ten consecutive transfers on a fungicide-free medium. No cross-resistance was observed between mefentrifluconazole and pyraclostrobin, fluopyram, prochloraz, mancozeb, or difenoconazole. Investigations into the biological characteristics of the resistant mutants revealed that six resistant mutants exhibited an enhanced compound fitness index (CFI) compared to the parental isolates, while others displayed a reduced or comparable CFI. The overexpression of CcCYP51A and CcCYP51B was detected in the resistant mutants, regardless of the presence or absence of mefentrifluconazole. Additionally, a two-way mixture of mefentrifluconazole and prochloraz at a concentration of 7:3 demonstrated superior control efficacy against the cucumber target spot, achieving a protection rate of 80%. In conclusion, this study suggests that the risk of C. cassiicola developing resistance to mefentrifluconazole is medium, and the overexpression of CcCYP51A and CcCYP51B might be associated with mefentrifluconazole resistance in C. cassiicola. The mefentrifluconazole and prochloraz two-way mixture presented promising control efficacy against the cucumber target spot.

Analysis of resistance risk and mechanism of the 14α-demethylation inhibitor ipconazole in Fusarium pseudograminearum.

Ipconazole is a broad-spectrum triazole fungicide that is highly effective against Fusarium pseudograminearum. However, its risk of developing resistance and mechanism are not well understood in F. pseudograminearum. Here, the sensitivities of 101 F. pseudograminearum isolates to ipconazole were investigated, and the average EC50 value was 0.1072 µg/mL. Seven mutants resistant to ipconazole were obtained by fungicide adaption, with all but one showing reduced fitness relative to the parental isolates. Cross-resistance was found between ipconazole and mefentrifluconazole and tebuconazole, but none between ipconazole and pydiflumetofen, carbendazim, fludioxonil, or phenamacril. In summary, these findings suggest that there is a low risk of F. pseudograminearum developing resistance to ipconazole. Additionally, a point mutation, G464S, was seen in FpCYP51B and overexpression of FpCYP51A, FpCYP51B and FpCYP51C was observed in ipconazole-resistant mutants. Assays, including transformation and molecular docking, indicated that G464S conferred ipconazole resistance in F. pseudograminearum.

Controlling Tin Halide Perovskite Oxidation Dynamics in Solution for Perovskite Optoelectronic Devices.

As a leading contender to replace lead halide perovskites, tin-based perovskites have demonstrated ever increasing performance in solar cells and light-emitting diodes (LEDs). They tend to be processed with dimethyl sulfoxide (DMSO) solvent, which has been identified as a major contributor to the Sn(II) oxidation during film fabrication, posing a challenge to the further improvement of Sn-based perovskites. Herein, we use NMR spectroscopy to investigate the kinetics of the oxidation of SnI2, revealing that autoamplification takes place, accelerating the oxidation as the reaction progresses. We propose a mechanism consistent with these observations involving water participation and HI generation. Building upon these insights, we have developed low-temperature Sn-based perovskite LEDs (PeLEDs) processed at 60 °C, achieving enhanced external quantum efficiencies (EQEs). Our research underscores the substantial potential of low-temperature DMSO solvent processes and DMSO-free solvent systems for fabricating oxidation-free Sn-based perovskites, shaping the future direction in processing Sn-containing perovskite materials and optoelectronic devices.

Multifunctional Modification of the Buried Interface in Mixed Tin-Lead Perovskite Solar Cells.

Mixed tin-lead perovskite solar cells can reach bandgaps as low as 1.2 eV, offering high theoretical efficiency and serving as base materials for all-perovskite tandem solar cells. However, instability and high defect densities at the interfaces, particularly the buried surface, have limited performance improvements. In this work, we present the modification of the bottom perovskite interface with multifunctional hydroxylamine salts. These salts can effectively coordinate the different perovskite components, having critical influences in regulating the crystallization process and passivating defects of varying nature. The surface modification reduced traps at the interface and prevented the formation of excessive lead iodide, enhancing the quality of the films. The modified devices presented fill factors reaching 81% and efficiencies of up to 23.8%. The unencapsulated modified devices maintained over 95% of their initial efficiency after 2000 h of shelf storage.

Hydrogen Production via Electrolysis of Wastewater.

The high energy consumption of traditional water splitting to produce hydrogen is mainly due to complex oxygen evolution reaction (OER), where low-economic-value O2 gas is generated. Meanwhile, cogeneration of H2 and O2 may result in the formation of an explosive H2/O2 gas mixture due to gas crossover. Considering these factors, a favorable anodic oxidation reaction is employed to replace OER, which not only reduces the voltage for H2 production at the cathode and avoids H2/O2 gas mixture but also generates value-added products at the anode. In recent years, this innovative strategy that combines anodic oxidation for H2 production has received intensive attention in the field of electrocatalysis. In this review, the latest research progress of a coupled hydrogen production system with pollutant degradation/upgrading is systematically introduced. Firstly, wastewater purification via anodic reaction, which produces free radicals instead of OER for pollutant degradation, is systematically presented. Then, the coupled system that allows for pollutant refining into high-value-added products combined with hydrogen production is displayed. Thirdly, the photoelectrical system for pollutant degradation and upgrade are briefly introduced. Finally, this review also discusses the challenges and future perspectives of this coupled system.

Mefentrifluconazole-Resistant Risk and Resistance-Related Point Mutation in FpCYP51B of Fusarium pseudograminearum.

Mefentrifluconazole, a triazole fungicide, exhibits remarkable efficacy in combating Fusarium spp. The mean EC50 value of mefentrifluconazole against 124 isolates of Fusarium pseudograminearum was determined to be 1.06 µg/mL in this study. Fungicide taming produced five mefentrifluconazole-resistant mutants with resistance factors ranging from 19.21 to 111.34. Compared to the original parental isolates, the fitness of three resistant mutants was much lower, while the remaining two mutants displayed enhanced survival fitness. There was evidence of positive cross-resistance between tebuconazole and mefentrifluconazole. Mefentrifluconazole resistance in F. pseudograminearum can be conferred by FpCYP51BL144F, which was identified in four mutants according to molecular docking and site-directed transformation experiments. Overexpression of FpCYP51s was also detected in the resistant mutants. In conclusion, mefentrifluconazole has a low-to-medium resistance risk in F. pseudograminearum, and the L144F mutation in FpCYP51B and the increased expression level of FpCYP51s may be responsible for mefentrifluconazole resistance in F. pseudograminearum.

Anchoring Charge Selective Self-Assembled Monolayers for Tin-Lead Perovskite Solar Cells.

Self-assembled monolayers (SAMs) have displayed great potential for improving efficiency and stability in p-i-n perovskite solar cells (PSCs). The anchoring of SAMs at the conductiv metal oxide substrates and their interaction with perovskite materials must be rationally tailored to ensure efficient charge carrier extraction and improved quality of the perovskite films. Herein, SAMs molecules with different anchoring groups and spacers to control the interaction with perovskite in the p-i-n mixed Sn-Pb PSCs are selected. It is found that the monolayer with the carboxylate group exhibits appropriate interaction and has a more favorable orientation and arrangement than that of the phosphate group. This results in reduced nonradiative recombination and enhanced crystallinity. In addition, the short chain length leads to an improved energy level alignment of SAMs with perovskite, improving hole extraction. As a result, the narrow bandgap (≈1.25 eV) Sn-Pb PSCs show efficiencies of up to 23.1% with an open-circuit voltage of up to 0.89 V. Unencapsulated devices retain 93% of their initial efficiency after storage in N2 atmosphere for over 2500 h. Overall, this work highlights the underexplored potential of SAMs for perovskite photovoltaics and provides essential findings on the influence of their structural modification.

Anlotinib in Chinese patients aged ≥70 years with advanced non-squamous non-small cell lung cancer without prior chemotherapy: a multicenter, single-arm pilot trial.

Background: Based on pharmacoeconomics, drug availability and actual treatment, optimal treatment regimens for Chinese non-small-cell lung carcinoma (NSCLC) patients over 70 years old are needed. Methods: This multicenter, single-arm pilot trial enrolled patients with advanced non-squamous NSCLC who refused systemic chemotherapy. Eligible patients received anlotinib (12 mg/day, d1-14, Q3W) until disease progression, intolerant toxicities, or withdrawal from the study. The primary endpoint was progression-free survival (PFS). Results: Forty-nine patients were screened between January 2019 and September 2021, of whom 40 patients were eligible. The median age was 76 years. With a median follow-up period of 16.20 (95% CI: 8.77, 25.10) months, the median PFS was 5.45 months (95% CI: 3.52-9.23) and the median overall survival was 10.32 months (95% CI: 6.44-12.78). Three patients achieved a partial response and 34 had stable disease, with an objective response rate of 7.5% and a disease control rate of 92.5%. Thirty-three (82.5%; 33/40) patients reported treatment-related adverse events (TRAEs) of any grade, and the incidence rate of grade ≥3 TRAEs was 35% (14/40). The most common grade ≥3 TRAEs were hypertension (4/40; 10.0%), hand-foot syndrome (3/40; 7.5%), and proteinuria (2/40; 5.0%). Conclusion: Anlotinib treatment was feasible and safe in Chinese elderly patients with advanced non-squamous NSCLC who did not receive any systemic chemotherapy.

Suppressed Defects by Functional Thermally Cross-Linked Fullerene for High-Efficiency Tin-Lead Perovskite Solar Cells.

Mixed tin-lead (Sn-Pb) perovskites have attracted the attention of the community due to their narrow bandgap, ideal for photovoltaic applications, especially tandem solar cells. However, the oxidation and rapid crystallization of Sn2+ and the interfacial traps hinder their development. Here, cross-linkable [6,6]-phenyl-C61-butyric styryl dendron ester (C-PCBSD) is introduced during the quenching step of perovskite thin film processing to suppress the generation of surface defects at the electron transport layer interface and improve the bulk crystallinity. The C-PCBSD has strong coordination ability with Sn2+ and Pb2+ perovskite precursors, which retards the crystallization process, suppresses the oxidation of Sn2+, and improves the perovskite bulk and surface crystallinity, yielding films with reduced nonradiative recombination and enhanced interface charge extraction. Besides, the C-PCBSD network deposited on the perovskite surface displays superior hydrophobicity and oxygen resistance. Consequently, the devices with C-PCBSD obtain PCEs of up to 23.4% and retained 97% of initial efficiency after 2000 h of storage in a N2 atmosphere.

Inhibiting Interfacial Nonradiative Recombination in Inverted Perovskite Solar Cells with a Multifunctional Molecule.

Interface-induced nonradiative recombination losses at the perovskite/electron transport layer (ETL) are an impediment to improving the efficiency and stability of inverted (p-i-n) perovskite solar cells (PSCs). Tridecafluorohexane-1-sulfonic acid potassium (TFHSP) is employed as a multifunctional dipole molecule to modify the perovskite surface. The solid coordination and hydrogen bonding efficiently passivate the surface defects, thereby reducing nonradiative recombination. The induced positive dipole layer between the perovskite and ETLs improves the energy band alignment, enhancing interface charge extraction. Additionally, the strong interaction between TFHSP and the perovskite stabilizes the perovskite surface, while the hydrophobic fluorinated moieties prevent the ingress of water and oxygen, enhancing the device stability. The resultant devices achieve a power conversion efficiency (PCE) of 24.6%. The unencapsulated devices retain 91% of their initial efficiency after 1000 h in air with 60% relative humidity, and 95% after 500 h under maximum power point (MPP) tracking at 35 °C. The utilization of multifunctional dipole molecules opens new avenues for high-performance and long-term stable perovskite devices.

Screening prognosis-related molecules in hepatocellular carcinoma by competing endogenous RNAs regulatory network / 中国肿瘤生物治疗杂志

@#[ [Abstract] ] Objective: To identify the molecules related to the occurrence, development and prognosis of hepatocellular carcinoma (HCC) by constructing ceRNA regulatory network of HCC. Methods: Data of HCC transcription group were downloaded from TCGA database. We processed the original data into expression matrix of mRNA, lncRNA and miRNA via Perl language. DGEs of RNA and microRNA were extracted and analyzed from the“Edge”package of R language with the threshold of (|log FC|>2.0 and P<0.01). Through the database comparison, the relationship pairs of different lncRNAs-different miRNAs, different miRNAs-different mRNAs were obtained, and then imported them into the Cytoscape software to construct the ceRNA regulatory network diagram. The survival data of three DGEs were collected and analyzed by“survival”package and Kaplan Meier plotter analysis software. The survival curves were drawn and the genes were obtained by survival analysis. Results: The lncRNArelated ceRNA regulatory network of HCC was successfully constructed. Three regulatory pairs of lncRNA-miRNA-mRNA were obtained by analyzing the interaction and regulatory relationship between DGEs via ceRNA network. Among them, one regulatory pathway (CCDC26-hsa-mir-141-EPHA2) was in accordance with ceRNA theory. The prognostic analyses showed that the survival rate of patients with high expression of 14 mRNAs was lower than those with low expression, which could be used as biomarkers of adverse prognosis of HCC. The survival rate of patients with low expression of 1 lncRNA (TSPEAR-AS1) and 2 mRNA (CPEB3 and PROK2) was lower than those with high expression, which may be the protective gene of HCC. Conclusions:Through screening of HCC lncRNA related ceRNA regulatory network,14mRNAswithhighexpressionmaybetherelevant molecules related to poor prognosisofHCC,while1lncRNAand2 mRNAs with low expression may be the molecules related to good prognosis of HCC, providing reference for HCC treatment and prognosis evaluation.