Spatial-temporal pattern of ecosystem services and sustainable development in representative mountainous cities: A case study of Chengdu-Chongqing Urban Agglomeration.

The Sustainable Development Goals (SDGs) are essential measure for preserving the balance between human well-being and natural ecosystems. The benefit of preserving ecosystems health play a crucial role in promoting the SDGs by providing stable ecosystem services (ESs). However, the ecological health of mountainous cities is vulnerable, with relative low ecological resilience. To investigate the conflict between ecosystems and sustainable development, this study takes the Chengdu-Chongqing Urban Agglomeration as the study area. The major tasks and results in this study include: (1) using the entropy weighting method and the InVEST model, we combined remote sensing, geographic, and statistical data to quantify three types of SDGs (economic, social, environmental) and four ESs (water yield, soil conservation, habitat quality, carbon storage), and establish a localized sustainable development assessment framework that is applicable to the Chengdu-Chongqing Urban Agglomeration. The results show that from 2014 to 2020, the three types of SDGs exhibited an overall upward trend, with the lowest values occurring in 2016. The gap between different counties has narrowed, but significant regional differences still remain, indicating an unbalanced development status quo. Among the 142 counties, water yield and soil conservation values show a consistent downward trend but occupies significant interannual variations, while habitat quality and carbon storage values increases consistently each year. (2) using Spearman's nonparametric correlation analysis and multiscale geographically weighted regression model to explore the temporal variation and spatial heterogeneity of correlations between county ESs and SDGs. The results showed significant heterogeneity in the spatial trade-offs and synergies between ESs and SDGs, with two pairs of synergies weakening, seven pairs of trade-offs increasing, and the strongest negative correlation between Economic Sustainable Development Goals and habitat quality. (3) we applied the self-organizing mapping neural networks to analyze the spatial clustering characteristics of ESs-SDGs. Based on the spatial clustering effects, we divides the Chengdu-Chongqing Urban Agglomeration into four zones, and different zones have different levels of ESs and SDGs. The targeted strategies should be adopted according to local conditions. This work is of great practical importance in maintaining the stability and sustainable development of the Chengdu-Chongqing Urban Agglomeration ecosystem and provides a scientific reference for the optimal regulation of mountainous cities.

Kribbella deserti sp. nov., isolated from rhizosphere soil of Ammopiptanthus mongolicus.

A Gram-stain-positive, aerobic bacterial strain, designated SL15-1T, was isolated from desert soil which was sampled from the rhizosphere of Ammopiptanthus mongolicus, Hangjin Banner, Ordos, Inner Mongolia, northern China. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain SL15-1T was clustered with Kribbella strains, sharing the highest similarity of 16S rRNA gene sequence (96.97 %) with Kribbella sandramycini DSM 15626T. Strain SL15-1T contained diphosphatidylglycerol, phosphatidylglycerol, phosphatidylcholine, an unknown phospholipid, an unknown lipid and two unknown aminophospholipids as the major polar lipids. MK-9(H4) was the predominant menaquinone, while anteiso-C15 : 0, iso-C16 : 0, C17 : 1ω8c and iso-C14 : 0 were the major cellular fatty acids. Its genomic DNA G+C content was 65.3 mol%. The results of physiological and biochemical tests allowed the discrimination of strain SL15-1T from its phylogenetic relatives. Kribbella deserti sp. nov. is therefore proposed with strain SL15-1T (=CGMCC 1.15906T=KCTC 39825T) as the type strain.

Influence of the active layer nanomorphology on device performance for ternary PbS(x)Se(1-x) quantum dots based solution-processed infrared photodetector.

In this paper, the influence of the active layer nanomorphology on device performance for ternary PbS(x)Se(1-x) quantum dot-based solution-processed infrared photodetector is presented. Firstly, ternary PbS(x)Se(1-x) quantum dots (QDs) in various chemical composition were synthesized and the bandgap of the ternary PbS(x)Se(1-x) QDs can be controlled by the component ratio of S/(S + Se), and then field-effect transistor (FET) based photodetectors Au/PbS0.4Se0.6:P3HT/PMMA/Al, in which ternary PbS0.4Se0.6 QDs doped with poly(3-hexylthiophene) (P3HT) act as the active layer and poly(methyl methacrylate) (PMMA) as the dielectric layer, were presented. By changing the weight ratio of P3HT to PbS0.4Se0.6 QDs (K = M(P3HT):M(QDs)) in dichlorobenzene solution, we found that the device with K = 2:1 shows optimal electrical property in dark; however, the device with K = 1:2 demonstrated optimal performance under illumination, showing a maximum responsivity and specific detectivity of 55.98 mA W(-1) and 1.02 × 10(10) Jones, respectively, at low V(DS) = -10 V and V(G) = 3 V under 980 nm laser with an illumination intensity of 0.1 mW cm(-2). By measuring the atomic force microscopy phase images of PbS0.4Se0.6:P3HT films in different weight ratio K, our experimental data show that the active layer nanomorphology has a great influence on the device performance. Also, it provides an easy way to fabricate high performance solution-processed infrared photodetector.

Stability enhancement of PbSe quantum dots via post-synthetic ammonium chloride treatment for a high-performance infrared photodetector.

Infrared (IR) emission lead selenide (PbSe) quantum dots (QDs) have gained considerable attention in the last decade due to their potential applications in optoelectronic devices. However, the comprehensive applications of PbSe QDs have not been realized yet due to their high susceptibility to oxidation in air. In this paper, we demonstrate the stability enhancement of PbSe colloidal QDs via a post-synthetic ammonium chloride treatment and its applications in a solution-processed high-performance IR photodetector with a field-effect transistor (FET) configuration by reversely fabricating the PbSe active layer and polymethylmethacrylate (PMMA) dielectric layer. The responsivity and the specific detectivity of the FET-based photodetector Au(source, drain)/PbSe(52 nm)/PMMA(930 nm)/Au(gate) reached 64.17 mA W(-1) and 5.08 × 10(10) Jones, respectively, under 980 nm laser illumination with an intensity of 0.1 mW cm(-2). Therefore, it provides a promising way to make a high-sensitivity near-IR/mid-IR photodetector.

Efficient and Stable Perovskite Solar Cells and Modules Enabled by Tailoring Additive Distribution According to the Film Growth Dynamics.

Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method. In this work, we found these two pre-crystallization processes lead to different order of crystallization dynamics within the perovskite thin film, resulting in the differences of additive distribution. We then tailor-designed an additive molecule named 1,3-bis(4-methoxyphenyl)thiourea to obtain films with fewer defects and holes at the buried interface, and prepared perovskite solar cells with a certified efficiency of 23.75%. Furthermore, this work also demonstrates an efficiency of 20.18% for the large-area perovskite solar module (PSM) with an aperture area of 60.84 cm2. The PSM possesses remarkable continuous operation stability for maximum power point tracking of T90 > 1000 h in ambient air.

Active landslide detection using integrated remote sensing technologies for a wide region and multiple stages: A case study in southwestern China.

While significant progress has been achieved in utilizing remote sensing technologies for landslide investigation in China, there remains a notable gap in consolidating information on applicable conditions, application stages, and workflows across various remote sensing methodologies. This paper proposes a comprehensive framework for active landslide detection, incorporating multiple stages and data sources, successfully implemented in a vast region of southwestern China. Furthermore, detailed discussions are provided on the effects of the geometric distortion, land cover type, and various InSAR methods on the accuracy of active landslide identification results. Additionally, the paper delves into the advantages of integrated remote sensing technology in active landslide investigation, encompassing the assessment of current landslide activity status, precise delineation of boundaries, identification of different deformation stages, and determination of damage patterns. Through comprehensive analysis of multisource data, it enhances understanding of the active landslide process, ultimately contributing to the mitigation of casualties and property damage.

The impact of climate change and human activities on the change in the net primary productivity of vegetation-taking Sichuan Province as an example.

Vegetation is an essential component of terrestrial ecosystems, influenced by climate change and human activities. Quantifying the relative contributions of climate change and human activities to vegetation dynamics is crucial for addressing global climate change. Sichuan Province is one of the essential ecological functional areas in the upper reaches of the Yangtze River, and its vegetation change is of great significance to the environmental function and ecological security of the Yangtze River Basin and southwest China. In this paper, the modified Carnegie-Ames-Stanford Approach(CASA) model was used to estimate the monthly NPP (Net Primary Productivity) of vegetation in Sichuan Province from 2000 to 2018, and the univariate linear regression analysis was used to analyze the temporal and spatial variation of vegetation NPP in Sichuan Province from 2000 to 2018. In addition, taking vegetation NPP as an index, Pearson correlation analysis, partial correlation analysis, and second-order partial correlation analysis were carried out to quantitatively analyze the contribution of climate change and human activities to vegetation NPP. Finally, the Hurst index and nonparametric Man-Kendall significance test were used to predict the future change trend of vegetation NPP in Sichuan Province. The results show that (1) from 2000 to 2018, the NPP of vegetation in Sichuan Province has a significant increasing trend (Slope = 6.09gC·m-2·a-1), with a multi-year average of 438.72 gC·m-2·a-1, showing a trend of low in the east and high in the middle. The response of vegetation NPP to altitude is different at different elevations; (2) the contribution rates of climate change and human activities to vegetation NPP change are 4.12gC·m-2·a-1 and 1.97gC·m-2·a-1, respectively. In contrast, the impact of human activities on NPP is more significant than climate change. Human activities are the main factors affecting vegetation restoration and degradation in Sichuan Province. However, the positive contribution to NPP change is less than climate change; (3) the future vegetation NPP change trend in Sichuan Province is mainly rising, and the same direction change trend is much larger than the reverse change trend. The areas with an increasing trend in the future account for 89.187% of the total area. This research helps understand the impact of climate change and human activities on vegetation change in Sichuan Province. It offers scientific bases for vegetation restoration and ecosystem management in Sichuan and the surrounding areas.

Evaluation and prediction of water conservation of the Yellow river basin in Sichuan Province, China, based on Google Earth Engine and CA-Markov.

The Yellow River Basin in China has the world's most serious soil erosion problem. The Yellow River Basin in Sichuan Province (YRS), as the upper reaches of the Yellow River, and its water conservation (WC) capacity greatly affects the ecological environment of the downstream basin. In recent years, YRS has received more and more attention, and numerous policies have been developed to improve local WC. However, there is a vacancy in the long-term research of WC in the YRS due to the lack of in-situ data. This study quantitatively evaluated the WC of YRS from 2001 to 2020 through Google Earth Engine (GEE) and analyzed the spatio-temporal variations of WC and land cover (LC). CA-Markov predicted the LC and WC in 2025 under three scenarios to assess the contribution of different scenarios to WC. The WC in YRS fluctuated from 1.93 to 6.77 billion m3. The climate is the dominant factor of WC change, but the effect of LC on WC is also evident. The WC capacity increases with vegetation coverage and height. The WC capacity of forests per km2 exceeds 600 mm, while that of grasslands is about 250 mm, and barren can cause around 300 mm of WC loss. In 2025, the WC in YRS may exceed 7.5 billion m3, but the past ecological management mode should be transformed. Improving the quality of land use and converting grasslands to forests is better than reducing cropland to improve WC.

Charge Carrier Conduction Mechanism in PbS Quantum Dot Solar Cells: Electrochemical Impedance Spectroscopy Study.

With its properties of bandgap tunability, low cost, and substrate compatibility, colloidal quantum dots (CQDs) are becoming promising materials for optoelectronic applications. Additionally, solution-processed organic, inorganic, and hybrid ligand-exchange technologies have been widely used in PbS CQDs solar cells, and currently the maximum certified power conversion efficiency of 9.9% has been reported by passivation treatment of molecular iodine. Presently, there are still some challenges, and the basic physical mechanism of charge carriers in CQDs-based solar cells is not clear. Electrochemical impedance spectroscopy is a monitoring technology for current by changing the frequency of applied alternating current voltage, and it provides an insight into its electrical properties that cannot be measured by direct current testing facilities. In this work, we used EIS to analyze the recombination resistance, carrier lifetime, capacitance, and conductivity of two typical PbS CQD solar cells Au/PbS-TBAl/ZnO/ITO and Au/PbS-EDT/PbS-TBAl/ZnO/ITO, in this way, to better understand the charge carriers conduction mechanism behind in PbS CQD solar cells, and it provides a guide to design high-performance quantum-dots solar cells.