A universal strategy for the fabrication of single-photon and multiphoton NIR nanoparticles by loading organic dyes into water-soluble polymer nanosponges.

The development of optical organic nanoparticles (NPs) is desirable and widely studied. However, most organic dyes are water-insoluble such that the derivatization and modification of these dyes are difficult. Herein, we demonstrated a simple platform for the fabrication of organic NPs designed with emissive properties by loading ten different organic dyes (molar masses of 479.1-1081.7 g/mol) into water-soluble polymer nanosponges composed of poly(styrene-alt-maleic acid) (PSMA). The result showed a substantial improvement over the loading of commercial dyes (3.7-50% loading) while preventing their spontaneous aggregation in aqueous solutions. This packaging strategy includes our newly synthesized organic dyes (> 85% loading) designed for OPVs (242), DSSCs (YI-1, YI-3, YI-8), and OLEDs (ADF-1-3, and DTDPTID) applications. These low-cytotoxicity organic NPs exhibited tunable fluorescence from visible to near-infrared (NIR) emission for cellular imaging and biological tracking in vivo. Moreover, PSMA NPs loaded with designed NIR-dyes were fabricated, and photodynamic therapy with these dye-loaded PSMA NPs for the photolysis of cancer cells was achieved when coupled with 808 nm laser excitation. Indeed, our work demonstrates a facile approach for increasing the biocompatibility and stability of organic dyes by loading them into water-soluble polymer-based carriers, providing a new perspective of organic optoelectronic materials in biomedical theranostic applications.

Characteristic investigation of scanning surface plasmon microscopy for nucleotide functionalized nanoarray.

A calculation based on surface plasmon coupling condition and Maxwell-Garnett equation was performed for predicting the coupling angle shift and thin film thickness in scanning surface plasmon microscopy (SSPM). The refractive index sensitivity and lateral resolution of an SSPM system was also investigated. The limit of detection of angle shift was 0.01°, the limit of quantification of angle shift was 0.03°, and the sensitivity was around 0.12° shift per nm ZnO film when the film thickness was less than 22.6 nm. Two partially connected Au nano-discs with a center-to-center distance of 1.1 µm could be identified as two peaks. The system was applied to image nanostructure defects and a virus-probe functionalized nanoarray. We expect the potential application in nanobiosensors with further optimization in the future.

Noninvasive assessment of liver function reserve with fluorescent dosimetry of indocyanine green.

Using in vivo multiphoton fluorescent dosimetry, we demonstrate that the clearance dynamics of Indocyanine Green (ICG) in the blood can quickly reveal liver function reserve. In normal rats, the ICG retention rate was below 10% at the 15-minute post-administration; While in the rat with severe hepatocellular carcinoma (HCC), the 15-minute retention rate is over 40% due to poor liver metabolism. With a 785 nm CW laser, the fluorescence dosimeter can evaluate the liver function reserve at a 1/10 clinical dosage of ICG without any blood sampling. In the future, this low-dosage ICG 15-minute retention dosimetry can be applied for the preoperative assessment of hepatectomy or timely perioperative examination.

Fabrication of glucose fiber sensor based on immobilized GOD technique for rapid measurement.

The concentration and pH value of the immobilized glucose oxidase (GOD) are critical parameters in a glucose sensor. In this study, we develop a glucose fiber sensor integrated with heterodyne interferometry to measure the phase difference arising from the chemical reaction between glucose and GOD. Our studies show that the response time and resolution of this sensor will be strongly affected by the pH and concentration properties of GOD. In addition, the results show good linearity between the calibration curve for the glucose solution and serum based sample. The response time of this sensor can be shorter than 3 seconds and best resolutions are 0.1 and 0.136 mg/dl for glucose solution and serum based sample, respectively.

Nanodots array rapidly fabricated by Dip-Pen nanolithography with temperature and humidity control.

This study demonstrates the advantage of Dip-Pen Nanolithography (DPN) as a research and design tool for metal nano-structure fabrications. We design two different gold nano-structures, which are fabricated by DPN etching method with temperature and humidity control. The plasmon resonance frequencies of both structures are measured with dark field scattering spectroscopy. Our results show that with temperature and humidity control, DPN is highly potential in developing photonic circuit, solar cell and biomedical devices due to the rapid fabrication and cost effectiveness.