RESUMEN
Solid-contact ion-selective electrodes (SC-ISEs) with ionophore-based polymer-sensitive membranes have been the major devices in wearable sweat sensors toward electrolyte analysis. However, the toxicity of ionophores in ion-selective membranes (ISMs), for example, valinomycin (K+ ion carrier), is a significant challenge, since the ISM directly contacts the skin during the tests. Herein, we report coating a hydrogel of graphene oxide-poly(vinyl alcohol) (GO-PVA) on the ISM to fabricate hydrogel-based SC-ISEs. The hydrogen bond interaction between GO sheets and PVA chains could enhance the mechanical strength through the formation of a cross-linking network. Comprehensive electrochemical tests have demonstrated that hydrogel-coated K+-SC-ISE maintains Nernstian response sensitivity, high selectivity, and anti-interference ability compared with uncoated K+-SC-ISE. A flexible hydrogel-based K+ sensing device was further fabricated with the integration of a solid-contact reference electrode, which has realized the monitoring of sweat K+ in real time. This work highlights the possibility of hydrogel coating for fabricating biocompatible wearable potentiometric sweat electrolyte sensors.
RESUMEN
As the entering of bacterial endotoxin into blood can cause various life-threatening pathological conditions, the screening and detection of low-abundance endotoxin are of great importance to human health. Taking advantage of signal amplification by target-assisted electrochemically mediated atom transfer radical polymerization (teATRP), we illustrate herein a simple and cost-effective electrochemical aptasensor capable of detecting endotoxin with high sensitivity and selectivity. Specifically, the aptamer receptor was employed for the selective capture of endotoxin, of which the glycan chain was then decorated with ATRP initiators via covalent coupling between the diol sites and phenylboronic acid (PBA) group, followed by the recruitment of ferrocene signal reporters via the grafting of polymer chains through potentiostatic eATRP under ambient temperature. As the glycan chain of endotoxin can be decorated with hundreds of ATRP initiators while the further grafting of polymer chains through eATRP can recruit hundreds to thousands of signal reporters to each initiator-decorated site, the teATRP-based strategy allows for the dual amplification of the detection signal. This dually amplified electrochemical aptasensor has the ability to sensitively and selectively detect endotoxin at a concentration as low as 1.2 fg/mL, and its practical applicability has been further demonstrated using human serum samples. Owing to the simplicity, high efficiency, biocompatibility, and inexpensiveness of the teATRP-based amplification strategy, this electrochemical aptasensor holds great application potential in the sensitive and selective detection of low-abundance endotoxin and many other glycan chain-containing bio-targets.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Humanos , Límite de Detección , Endotoxinas , Polímeros , Oligonucleótidos , Técnicas ElectroquímicasRESUMEN
As lipopolysaccharide (LPS) is closely associated with sepsis and other life-threatening conditions, the point-of-care (POC) detection of LPS is of significant importance to human health. In this work, we illustrate an electrochemical aptasensor for the POC detection of low-abundance LPS by utilizing boronate affinity (BA) as a simple, efficient, and cost-effective amplification strategy. Briefly, the BA-amplified electrochemical aptasensing of LPS involves the tethering of the aptamer receptors and the BA-mediated direct decoration of LPS with redox signal tags. As the polysaccharide chain of LPS contains hundreds of cis-diol sites, the covalent crosslinking between the phenylboronic acid group and cis-diol sites can be harnessed for the site-specific decoration of each LPS with hundreds of redox signal tags, thereby enabling amplified detection. As it involves only a single-step operation (â¼15 min), the BA-mediated signal amplification holds the significant advantages of unrivaled simplicity, rapidness, and cost-effectiveness over the conventional nanomaterial- and enzyme-based strategies. The BA-amplified electrochemical aptasensor has been successfully applied to specifically detect LPS within 45 min, with a detection limit of 0.34 pg/mL. Moreover, the clinical utility has been validated based on LPS detection in complex serum samples. As a proof of concept, a portable device has been developed to showcase the potential applicability of the BA-amplified electrochemical LPS aptasensor in the POC testing. In view of its simplicity, rapidness, and cost-effectiveness, the BA-amplified electrochemical LPS aptasensor holds broad application prospects in the POC testing.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Nanoestructuras , Humanos , Lipopolisacáridos , Técnicas Electroquímicas , Límite de Detección , OroRESUMEN
Sweat pH is a critical indicator for evaluating human health. With the extensive attention on the wearable and flexible biosensing devices, the technology for the monitoring of human sweat can be realized. In this study, a sensitive, miniaturized, and flexible electrochemical sweat pH sensor was developed for the continuous and real-time monitoring of the hydrogen-ion concentration in human sweat. A flexible electrode was fabricated on the poly(ethylene terephthalate) (PET) substrate by a simple and low-cost screen-printing technology, which was based on the integration of fluoroalkyl silane-functionalized Ti3C2Tx (F-Ti3C2Tx) and the polyaniline (PANI) membrane technology instead of the traditional ion-sensitive membrane. The surface functionalization strategy for Ti3C2Tx with perfluorodecyltrichlorosilane can provide environmental stability. Functionalized Ti3C2Tx (F-Ti3C2Tx) was doped with PANI to obtain improved responsiveness, sensitivity, and reversibility. The constructed microsize, portable, and wearable F-Ti3C2Tx/PANI pH sensor aimed to real-time monitor the pH value of human sweat during exercise. On-body sweat pH monitoring for females and males, respectively, exhibited high accuracy and continuous stability compared with ex situ analyses. This study thus offers a facile and practical solution for developing a highly reliable MXene-based mini-type pH sensor to realize the online monitoring of human sweat pH.
Asunto(s)
Técnicas Biosensibles , Dispositivos Electrónicos Vestibles , Femenino , Humanos , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Sudor/química , Titanio/análisisRESUMEN
The aqueous alkaline rechargeable batteries (AARBs) have an attractive potential for electrochemical energy storage devices. In view of the advantages of high theoretical capacity and desirable negative operating window, bismuth (Bi) has been deemed as a hopeful anode material for AARBs. Unfortunately, intensive reported works of Bi anode are still confronted with limited capacity and poor cycling stability. Herein, the designed electrodes of different size Bi nanoparticles embedded in porous carbon nanofibers with a contrasting nitrogen doping content are obtained by electrospinning and thermal treatment processes. The effect of the N dopant in carbon shell is demonstrated on the Bi core, which is in favor of enhancing the capacity of Bi anodes. More importantly, the core structure with highly dispersed ultrasmall Bi nanoparticles (<20 nm) in carbon matrix plays a crucial role in long-term durability. Accordingly, the optimized polydisperse ultrasmall Bi nanoparticles confined in N-rich porous carbon nanofibers electrode (Bi@NPCF) presents an admirable capacity of 196.1 mAh g-1 at 3 A g-1 and outstanding durable lifespan (retain 116.95% after 10 000 cycles). In addition, the fabricated Bi@NPCF//NiCo2 O4 battery exhibits an exceptional energy and power density with durable stability (95.9% after 5000 cycles).
RESUMEN
The solid-contact ion-selective electrodes (SC-ISEs) are a type of potentiometric analytical device with features of rapid response, online analysis, and miniaturization. The state-of-the-art SC-ISEs are composed of a solid-contact (SC) layer and an ion-selective membrane (ISM) layer with respective functions of ion-to-electron transduction and ion recognition. Two challenges for the SC-ISEs are the water-layer formation at the SC/ISM phase boundary and the leaking of ISM components, which are both originated from the ISM. Herein, we report a type of SC-ISE based on classic Li-ion battery materials as the SC layer without using the ISM for potentiometric lithium-ion sensing. Both LiFePO4- and LiMn2O4-based SC-ISEs display good Li+ sensing properties (sensitivity, selectivity, and stability). The proposed LiFePO4 electrode exhibits comparable sensitivity and a linear range to conventional SC-ISEs with ISM. Owing to the nonexistence of ISM, the LiFePO4 electrode displays high potential stability. Besides, the LiMn2O4 electrode shows a Nernstian response toward Li+ sensing in a human blood serum solution. This work emphasizes the concept of non-ISM-based SC-ISEs for potentiometric ion sensing.
Asunto(s)
Electrodos de Iones Selectos , Litio , Suministros de Energía Eléctrica , Humanos , Iones , PotenciometríaRESUMEN
As a product of nonenzymatic glycation, glycated albumin (GA) is a promising serum marker for the short-term glycemic monitoring in patients with diabetes. On the basis of the boronate crosslinking (BCL)-enabled direct labeling of ferrocene (Fc) tags to the nonenzymatically glycated (NEG) sites, we report herein a novel aptamer-based ratiometric electrochemical (apt-REC) platform for the point-of-care (POC) assay of GA. This apt-REC platform is based on the recognition of GA proteins by the methylene blue (MB)-modified aptamer receptors and the labeling of the Fc tags to the NEG sites via the BCL. Using MB as the reference tag and Fc as the quantification tag, the ratio of the oxidation currents (i.e., IFc/IMB) can serve as the yardstick for the ratiometric assay of GA. Due to the presence of tens of the NEG sites, each GA protein can be labeled with tens of quantification tags, permitting the amplified assay in a simple, time-saving, and low-cost manner. The ratiometric signal exhibited a good linear response over the range from 0.1 to 100 µg/mL, with a detection limit of 45.5 ng/mL. In addition to the superior reproducibility and robustness, this apt-REC platform is highly selective (capable of discriminating GA against human serum albumin (HSA)) and applicable to GA assay in serum samples. Due to its low cost, high reproducibility and robustness, simple operation, and high sensitivity and selectivity, this apt-REC platform holds great promise in the POC assay of GA for diabetes management.
Asunto(s)
Ácidos Borónicos , Técnicas Electroquímicas , Albúmina Sérica Glicada , Humanos , Aptámeros de Nucleótidos/química , Técnicas Biosensibles/métodos , Ácidos Borónicos/química , Reactivos de Enlaces Cruzados/química , Técnicas Electroquímicas/métodos , Productos Finales de Glicación Avanzada/química , Límite de Detección , Albúmina Sérica/química , Albúmina Sérica/análisis , Albúmina Sérica Humana/química , Albúmina Sérica Humana/análisisRESUMEN
Solid-contact ion-selective electrodes (SC-ISEs) feature miniaturization and integration that have gained extensive attention in non-invasive wearable sweat electrolyte sensors. The state-of-the-art wearable SC-ISEs mainly use polyethylene terephthalate, gold and carbon nanotube fibers as flexible substrates but suffer from uncomfortableness, high cost and biotoxicity. Herein, we report carbon fiber-based SC-ISEs to construct a four-channel wearable potentiometric sensor for sweat electrolytes monitoring (Na+/K+/pH/Cl-). The carbon fibers were extracted from commercial cloth, of which the starting point is addressing the cost and reproducibility issues for flexible SC-ISEs. The bare carbon fiber electrodes exhibited reversible voltammetric and stable impedance performances. Further fabricated SC-ISEs based on corresponding ion-selective membranes disclosed Nernstian sensitivity and anti-interface ability toward both ions and organic species in sweat. Significantly, these carbon fiber-based SC-ISEs revealed high reproducibility of standard potentials between normal and bending states. Finally, a textile-based sensor was integrated with a solid-contact reference electrode, which realized on-body sweat electrolytes analysis. The results displayed high accuracy compared with ex-situ tests by ion chromatography. This work highlights carbon fiber-based multichannel wearable potentiometric ion sensors with low cost, biocompatibility and reproducibility.
RESUMEN
Flexible quasi-solid-state sodium ion batteries featuring their low-cost, high safety and excellent mechanical strength have attracted widespread interest in the field of wearable electronic devices. However, the development of such batteries faces great challenges including the construction of interfacial compatible flexible electrode materials and addressing the high safety demands of electrolyte. Here selenium-vacancies regulated bimetallic selenide heterojunctions anchored on waste cotton cloth-derived flexible carbon cloth (FCC) with robust interfacial C-Se-Co/Fe chemical bonds as a flexible anode material (CCFSF) is proposed by ultrafast microwave pyrolysis method. Rich selenium vacancies and CoSe2 /FeSe2-x heterostructures are synchronously formed that can significantly improve ionic and electronic diffusion kinetics. Additionally, a uniform carbon layer coating on the surface of Se-deficient heterostructures endows it with outstanding structural stability. The flexible cathode (PB@FCC) is also fabricated by directly growing Prussian blue nanoparticles on the FCC. Furthermore, an advanced flexible quasi-solid-state Na-ion pouch cell is assembled by coupling CCFSF anode, PB@FCC cathode with P(VDF-HFP)-based gel polymer electrolyte. The full cell not only demonstrates excellent energy storage performance but also robust mechanical flexibility and safety. The present work offers an effective avenue to achieve high safety flexible energy storage device, promoting the development of flexible wearable electronic devices.
RESUMEN
The level of hydrogen ions in sweat is one of the most important physiological indexes for the health state of the human body. As a type of two-dimensional (2D) material, MXene has the advantages of superior electrical conductivity, a large surface area, and rich functional groups on the surface. Herein, we report a type of Ti3C2Tx-based potentiometric pH sensor for wearable sweat pH analysis. The Ti3C2Tx was prepared by two etching methods, including a mild LiF/HCl mixture and HF solution, which was directly used as the pH-sensitive materials. Both etched Ti3C2Tx showed a typical lamellar structure and exhibited enhanced potentiometric pH responses compared with a pristine precursor of Ti3AlC2. The HF-Ti3C2Tx disclosed the sensitivities of -43.51 ± 0.53 mV pH-1 (pH 1-11) and -42.73 ± 0.61 mV pH-1 (pH 11-1). A series of electrochemical tests demonstrated that HF-Ti3C2Tx exhibited better analytical performances, including sensitivity, selectivity, and reversibility, owing to deep etching. The HF-Ti3C2Tx was thus further fabricated as a flexible potentiometric pH sensor by virtue of its 2D characteristic. Upon integrating with a solid-contact Ag/AgCl reference electrode, the flexible sensor realized real-time monitoring of pH level in human sweat. The result disclosed a relatively stable pH value of ~6.5 after perspiration, which was consistent with the ex situ sweat pH test. This work offers a type of MXene-based potentiometric pH sensor for wearable sweat pH monitoring.
RESUMEN
Sensitivity and linearity are two crucial indices to assess the sensing capability of pressure sensors; unfortunately, the two mutually exclusive parameters usually result in limited applications. Although a series of microengineering strategies including micropatterned, multilayered, and porous approach have been provided in detail, the conflict between the two parameters still continues. Here, we present an efficient strategy to resolve this contradiction via modulus difference-induced embedding deformation. Both the microscopic observation and finite element simulation results confirm the embedding deformation behavior ascribed to the elastic modulus difference between soft electrode and rigid microstructures. The iontronic pressure sensor with high sensitivity (35 kPa-1) and wide linear response range (0-250 kPa) is further fabricated and demonstrates the potential applications in monitoring of high-fidelity pulse waveforms and human motion. This work provides an alternative strategy to guide targeted design of all-around and comprehensive pressure sensor.
RESUMEN
Both type II and Z schemes can explain the charge transfer behavior of the heterojunction structure well, but the type of heterojunction structure formed between bismuth vanadium oxide and carbon nitride still has not been clarified. Herein, we rationally prepared bismuth vanadium oxide with {010} and {012} facets predominantly and carbon nitride as a decoration to construct a core-shell structure with bismuth vanadium oxide wrapped in carbon nitride to ensure the same photocatalytic reaction interface. Through energy band establishment and radical species investigation, both {010} and {012} facets dominated bismuth vanadium oxide/carbon nitride composites exhibit the type II heterojunction structures rather than the Z-scheme heterojunctions. Furthermore, to investigate the effect of type II heterojunction, the photocatalytic tetracycline degradations were performed, finding that {010} facets dominated bismuth vanadium oxide/carbon nitride composite demonstrated the higher degradation efficiency than that of {012} facets, due to the higher conduction band energy. Additionally, through the free radical trapping experiments and intermediate detection of degradation products, the superoxide radical was proven to be the main active radical to decompose the tetracycline molecules. Therein, the tetracycline molecules were degraded to water and carbon dioxide by dihydroxylation-demethylation-ring opening reactions. This work investigates the effect of crystal planes on heterojunction types through two different exposed crystal planes of bismuth vanadate oxide, which can provide some basic research and theoretical support for the progressive and controlled synthesis of photocatalysts with heterojunction structures.
Asunto(s)
Bismuto , Vanadio , Bismuto/química , Procesos Fotoquímicos , Catálisis , Luz , Tetraciclina/química , Antibacterianos/química , ÓxidosRESUMEN
Here, we developed a wearable electrochemical sensor for pH and K+ monitoring in sweat. The sensor was composed of flexible reference electrode, pH response electrode and K+ selective electrode, which were prepared through printing ß-CD functionalized graphene (ß-CD/RGO) water suspension on conductive PET substrate with microelectronic printer. ß-CD/RGO not only served as the pH sensitive material for pH response electrode with good sensitivity, selectivity and reproducibility due to its abundant oxygen-containing functional groups, but also worked as the ion-to-electron transducer for K+ selective electrode with good sensitivity. The wearable sensor exhibited good potential stability at different bending states. On-body sweat pH and K+ measurements showed high accuracy compared with ex-situ analysis.
Asunto(s)
Técnicas Biosensibles , Grafito , Dispositivos Electrónicos Vestibles , Técnicas Electroquímicas , Concentración de Iones de Hidrógeno , Iones , Potasio , Reproducibilidad de los Resultados , SudorRESUMEN
Solid-contact ion-selective electrodes are a type of ion measurement devices that have been focused in wearable biotechnology based on the features of miniaturization and integration. However, the solid-contact reference electrodes (SC-REs) remain relatively less focused compared with numerous working (or indicator) electrodes. Most SC-REs in wearable sensors rely on Ag/AgCl reference electrodes with solid electrolytes, for example, the hydrophilic electrolyte salts in polymer matrix, but face the risk of electrolyte leakage. Herein, we report a type of SC-REs based on the silver/silver tetraphenylborate (Ag/AgTPB) organic insoluble electrode. The SC-RE consists of a Ag substrate, a solid contact (AgTPB), and a plasticized poly(vinyl chloride) (PVC) membrane containing the hydrophobic organic salt of tetrabutylammonium tetraphenylborate (TBATPB). The potentiometric measurements demonstrated that the SC-RE of Ag/AgTPB/PVC-TBATPB showed a reproducible standard potential in various electrolytes and disclosed high long-term stability. This SC-RE was further fabricated on a flexible substrate and integrated into all-solid-state wearable potentiometric ion sensor for sweat Cl- monitoring.
RESUMEN
Solid-contact ion-selective electrodes (SC-ISEs) exhibit great potential in the detection of routine and portable ions which rely on solid-contact (SC) materials for the transduction of ions to electron signals. Carbon-based materials are state-of-the-art SC transducers due to their high electrical double-layer (EDL) capacitance and hydrophobicity. However, researchers have long searched for ways to enhance the interfacial capacitance in order to improve the potential stability. Herein, three representative carbon-based SC materials including nitrogen-doped mesoporous carbon (NMC), reduced graphene oxide (RGO), and carbon nanotubes (CNT) were compared. The results disclose that the NMC has the highest EDL capacitance owing to its mesopore structure and N-doping while maintaining high hydrophobicity so that no obvious water-layer effect was observed. The Ca2+-SC-ISEs based on the SC of NMC exhibited high potential stability compared with RGO and CNT. This work offers a guideline for the development of carbon-material-based SC-ISEs through mesoporous and N-doping engineering to improve the interfacial capacitance. The developed NMC-based solid-contact Ca2+-SC-ISE exhibited a Nernstian slope of 26.3 ± 3.1 mV dec-1 ranging from 10 µM to 0.1 M with a detection limit of 3.2 µM. Finally, a practical application using NMC-based SC-ISEs was demonstrated through Ca2+ ion analysis in mineral water and soil leaching solutions.
RESUMEN
Thermally activated delayed fluorescence (TADF) light-emitting electrochemical cells (TADF-LECs) are appealing due to their simple sandwich structure and potential applications in wearable displays and sensors. However, achieving high performance remains challenging. In this paper, we demonstrate that the use of TADF emitters with a low aggregated-caused quenching (ACQ) tendency is crucial to address this challenge. To verify it, two types of TADF-LECs are compared in parallel using different kinds of TADF emitters. The control device uses 2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile (4CzIPN) as the dopant, which suffers from a serious ACQ issue and thus dramatically limits the doping concentrations of 4CzIPN in these TADF-LECs. At the best doping condition (0.5 wt %), insufficient host-to-dopant energy transfer (ET) does exist, thereby displaying very limited efficiency and luminance, i.e., 2.43% and 1483 cd m-2. By contrast, the TADF-LECs using 3,6-di(tert-butyl)-1,8-di(4-(bis(4-(tert-butyl)phenyl)amino)phenyl)-9-(4-(4,6-diphenyl-1,3,5-triazin-2-yl) phenyl) carbazole (BPAPTC) can tolerate a much higher doping concentration because BPAPTC is a satisfactory TADF emitter featuring a low ACQ tendency. At the optimized doping condition of 18 wt %, the BPAPTC-based emissive layer possesses the best TADF property, including the longest τDF (2646 ns), the largest rDF (69%), and the highest kRISC of 7.50 × 105 s-1. Moreover, the corresponding TADF-LEC simultaneously displays the most efficient host-to-dopant ET. It thus achieves unprecedented performance, e.g., the highest external quantum efficiency (EQEmax.) of 7.6%, the highest luminance (Lmax.) of 3696 cd m-2, and an EQE of 7.01% at a practical high luminance of 1000 cd m-2.
RESUMEN
Wearable sensors reflect the real-time physiological information and health status of individuals by continuously monitoring biochemical markers in biological fluids, including sweat, tears and saliva, and are a key technology to realize portable personalized medicine. Flexible electrochemical pH sensors can play a significant role in health since the pH level affects most biochemical reactions in the human body. pH indicators can be used for the diagnosis and treatment of diseases as well as the monitoring of biological processes. The performances and applications of wearable pH sensors depend significantly on the properties of the pH-sensitive materials used. At present, existing pH-sensitive materials are mainly based on polyaniline (PANI), hydrogen ionophores (HIs) and metal oxides (MOx). In this review, we will discuss the recent progress in wearable pH sensors based on these sensitive materials. Finally, a viewpoint for state-of-the-art wearable pH sensors and a discussion of their existing challenges are presented.
RESUMEN
The quest for both high sensitivity and a wide linear range in electronic skin design is perpetual; unfortunately, these two key parameters are generally mutually exclusive. Although limited success in attaining both high sensitivity and a wide linear range has been achieved via material-specific or complicated structure design, addressing the conflict between these parameters remains a critical challenge. Here, inspired by the human somatosensory system, we propose hair-epidermis-dermis hierarchical structures based on a reduced graphene oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) aerogel to reconcile this contradiction between high sensitivity and a wide linear range. This hierarchical structure enables an electronic skin (e-skin) sensor linear sensing range up to 30 kPa without sacrificing the high sensitivity (137.7 kPa-1), revealing an effective strategy to overcome the above-mentioned conflict. In addition, the e-skin sensor also exhibits a low detection limit (1.1 Pa), fast responsiveness (â¼80 ms), and excellent stability and reproducibility (over 10 000 cycles); as a result, the e-skin platform is capable of detecting small air flow and monitoring human pulse and even sound-induced vibrations. This structure may boost the ongoing research on the structural design and performance regulation of emerging flexible electronics.
Asunto(s)
Dispositivos Electrónicos Vestibles , Dermis , Epidermis , Humanos , Presión , Reproducibilidad de los ResultadosRESUMEN
Current solid potentiometric ion sensors mostly rely on polymeric-membrane-based, solid-contact, ion-selective electrodes (SC-ISEs). However, anion sensing has been a challenge with respect to cations due to the rareness of anion ionophores. Classic metal/metal insoluble salt electrodes (such as Ag/AgCl) without an ion-selective membrane (ISM) offer an alternative. In this work, we first compared the two types of SC-ISEs of Cl- with/without the ISM. It is found that the ISM-free Ag/AgCl electrode discloses a comparable selectivity regarding organic chloride ionophores. Additionally, the electrode exhibits better comprehensive performances (stability, reproducibility, and anti-interference ability) than the ISM-based SC-ISE. In addition to Cl-, other Ag/AgX electrodes also work toward single and multi-valent anions sensing. Finally, a flexible Cl- sensor was fabricated for on-body monitoring the concentration of sweat Cl- to illustrate a proof-of-concept application in wearable anion sensors. This work re-emphasizes the ISM-free SC-ISEs for solid anion sensing.
RESUMEN
In this work, a signal amplification competitive-type photoelectrochemical system comprised of bismuth sulfide/bismuth oxyiodide/zinc oxide (Bi2S3/BiOI/ZnO) nano-array as platform and Ag2S-modified aptamers probe DNA (p DNA@Ag2S) as competition content for rapid and sensitive detection of OTA in microfluidic devices. The BiOI nano-array was first growth on surfaces of ZnO by a simple electrodeposited method, which provided large specific surface area and high stability to solve distribution of sensing platform and loose of combination of sensing substrate. Then, the Bi2S3 could be in-situ growth by self-sacrificial part Bi3+ of BiOI to form heterojunction without destroying the structure of the nano-array. A strong photocurrent intensity was acquired by the Bi2S3/BiOI/ZnO modified onto indium tin oxide (ITO) electrode, due to its good matching cascade band-edge levels could improve efficient separation of photo-generated e-/h+ pairs. After immobilizing with the capture DNA (c DNA) and the sequential hybridization of p DNA@Ag2S, the photocurrent intensity reduced obviously because part photo-generated electron transformed to Ag2S rather than Bi2S3/BiOI/ZnO electrode. Subsequently, the photocurrent intensity increased evident when immobilized the target OTA, owing to the OTA could bind the p DNA@Ag2S to form the specific-complex that were released from the electrode surface. Under optimal conditions, the prepared PEC microfluidic sensor exhibited a linear concentration of OTA from 0.01 pg/mL to 200 ng/mL with a low detection limit of 0.0035 pg/mL (S/N = 3). Furthermore, it achieved high sensitivity, good specificity, and acceptable stability and further provided an efficient method for sensitive detection of other target mycotoxins in practical application.