A chimpanzee enamel-diet δ13C enrichment factor and a refined enamel sampling strategy: Implications for dietary reconstructions.

Reconstructing diets from stable carbon isotopic signals in enamel bioapatite requires the application of a δ13C enamel-diet enrichment factor, or the isotopic offset between diet and enamel, which has not been empirically determined for any primate. In this study, an enamel-diet enrichment factor (ε∗enamel-diet) of 11.8 ± 0.3‰ is calculated for chimpanzees (Pan troglodytes) at Ngogo in Kibale National Park, Uganda, based on a comprehensive isotopic assessment of previously analyzed dietary plant data and new isotopic analyses of enamel apatite. Different enamel sampling methods are evaluated to determine the potential influence of weaning on isotopic enamel values and dietary interpretations. The new chimpanzee enrichment factor and a sampling strategy that excludes teeth that formed before weaning completion are applied to all known chimpanzee δ13Cenamel data, either previously published or newly derived in this study, resulting in a dietary range of almost 6‰ across all chimpanzees sampled. This new chimpanzee enamel-diet enrichment factor is then used to reassess dietary reconstructions of 12 fossil hominin species whose isotopic enamel signatures have been determined. Results reveal hominin diets that are isotopically more positive than previously reconstructed, highlighting the widespread contribution of 13C-enriched C4/crassulacean acid metabolism (CAM) resources in fossil hominin diets and emphasizing the broad use of these resources during human evolution. These findings stress the importance of ascertaining and employing an appropriate enrichment factor for dietary reconstructions of specific taxa as well as standardizing the sampling protocol for tooth enamel in isotopic paleodietary reconstructions.

New Oligocene primate from Saudi Arabia and the divergence of apes and Old World monkeys.

It is widely understood that Hominoidea (apes and humans) and Cercopithecoidea (Old World monkeys) have a common ancestry as Catarrhini deeply rooted in Afro-Arabia. The oldest stem Catarrhini in the fossil record are Propliopithecoidea, known from the late Eocene to early Oligocene epochs (roughly 35-30 Myr ago) of Egypt, Oman and possibly Angola. Genome-based estimates for divergence of hominoids and cercopithecoids range into the early Oligocene; however, the mid-to-late Oligocene interval from 30 to 23 Myr ago has yielded little fossil evidence documenting the morphology of the last common ancestor of hominoids and cercopithecoids, the timing of their divergence, or the relationship of early stem and crown catarrhines. Here we describe the partial cranium of a new medium-sized (about 15-20 kg) fossil catarrhine, Saadanius hijazensis, dated to 29-28 Myr ago. Comparative anatomy and cladistic analysis shows that Saadanius is an advanced stem catarrhine close to the base of the hominoid-cercopithecoid clade. Saadanius is important for assessing competing hypotheses about the ancestral morphotype for crown catarrhines, early catarrhine phylogeny and the age of hominoid-cercopithecoid divergence. Saadanius has a tubular ectotympanic but lacks synapomorphies of either group of crown Catarrhini, and we infer that the hominoid-cercopithecoid split happened later, between 29-28 and 24 Myr ago.

Long bone cross-sectional properties reflect changes in locomotor behavior in developing chimpanzees.

OBJECTIVES: Recent studies indicate that the locomotor behavior of wild chimpanzees changes during development. Before transitioning to quadrupedal knuckle-walking in adulthood, young chimpanzees engage in a significant amount of upper limb loading suspensory behavior. We investigated whether these dramatic changes in locomotion influence the strength and shape of chimpanzee long bones. MATERIALS AND METHODS: We examined changes in chimpanzee arboreal locomotion over the course of development using behavioral data collected on wild chimpanzees. We measured the midshaft geometric properties of femora and humeri of wild-caught individuals housed in museum collections using micro computed tomographic scans. RESULTS: Chimpanzees spent less time moving arboreally as they aged. Femoral/humeral strength ratios also increased with age, as predicted by the changing loading environment during development. Additional analyses revealed that femoral shape, but not humeral shape, varied across chimpanzee age classes. Adult femora were more elliptical compared with those of infants. This change in adult femora is consistent with the observation that adult chimpanzees spend most of their time moving terrestrially and consequently experience a less variable loading environment than do infants. DISCUSSION: Taken together, these findings contribute to our understanding of how ontogenetic changes in function affect form. As similar changes may have characterized the behavioral and skeletal ontogeny of extinct hominoids including hominins, these findings furnish a potential means to make inferences about the behavior of fossil taxa based on the structural properties of their bones.

Intraspecific variation of long bone cross-sectional properties in Pan troglodytes troglodytes and Gorilla gorilla gorilla.

OBJECTIVES: Morphological intraspecific variation is due to the balance between skeletal plasticity and genetic constraint on the skeleton. Osteogenic responses to external stimuli, such as locomotion, have been well documented interspecifically across the primate order, but less so at the intraspecific level. Here, we examine the differences in cross-sectional variability of the femur, humerus, radius, and tibia in Pan troglodytes troglodytes versus Gorilla gorilla gorilla. We investigate whether there are sex, species, bone, and trait differences in response to variable body size and locomotion. MATERIALS AND METHODS: Adult male and female P. t. troglodytes and G. g. gorilla long bones from the Cleveland Museum of Natural History were scanned with a peripheral quantitative computer tomography system. Scans were taken at the midshaft of each bone according to functional bone length. Coefficients of variation were used to provide a size-independent measure of variation. We applied a Bonferroni correction to account for the multiple pairwise tests. RESULTS: There were limited significant differences between males and females, however, females tended to be more variable than males. Variation in Gorilla, when significant, was greater than in Pan, although significant differences were limited. There were no differences between bone variability in male and female Gorilla, and female Pan. DISCUSSION: Increased female variability may be due to more variable locomotor behavior, particularly during periods of pregnancy, lactation, and caring for an offspring compared to consistent locomotion over the life course by males. Body size may be a contributing factor to variability; more work is needed to understand this relationship.

Oldest evidence of abundant C4 grasses and habitat heterogeneity in eastern Africa.

The assembly of Africa's iconic C4 grassland ecosystems is central to evolutionary interpretations of many mammal lineages, including hominins. C4 grasses are thought to have become ecologically dominant in Africa only after 10 million years ago (Ma). However, paleobotanical records older than 10 Ma are sparse, limiting assessment of the timing and nature of C4 biomass expansion. This study uses a multiproxy design to document vegetation structure from nine Early Miocene mammal site complexes across eastern Africa. Results demonstrate that between ~21 and 16 Ma, C4 grasses were locally abundant, contributing to heterogeneous habitats ranging from forests to wooded grasslands. These data push back the oldest evidence of C4 grass-dominated habitats in Africa-and globally-by more than 10 million years, calling for revised paleoecological interpretations of mammalian evolution.

The evolution of hominoid locomotor versatility: Evidence from Moroto, a 21 Ma site in Uganda.

Living hominoids are distinguished by upright torsos and versatile locomotion. It is hypothesized that these features evolved for feeding on fruit from terminal branches in forests. To investigate the evolutionary context of hominoid adaptive origins, we analyzed multiple paleoenvironmental proxies in conjunction with hominoid fossils from the Moroto II site in Uganda. The data indicate seasonally dry woodlands with the earliest evidence of abundant C4 grasses in Africa based on a confirmed age of 21 million years ago (Ma). We demonstrate that the leaf-eating hominoid Morotopithecus consumed water-stressed vegetation, and postcrania from the site indicate ape-like locomotor adaptations. These findings suggest that the origin of hominoid locomotor versatility is associated with foraging on leaves in heterogeneous, open woodlands rather than forests.

Wrist morphology reveals substantial locomotor diversity among early catarrhines: an analysis of capitates from the early Miocene of Tinderet (Kenya).

Considerable taxonomic diversity has been recognised among early Miocene catarrhines (apes, Old World monkeys, and their extinct relatives). However, locomotor diversity within this group has eluded characterization, bolstering a narrative that nearly all early catarrhines shared a primitive locomotor repertoire resembling that of the well-described arboreal quadruped Ekembo heseloni. Here we describe and analyse seven catarrhine capitates from the Tinderet Miocene sequence of Kenya, dated to ~20 Ma. 3D morphometrics derived from these specimens and a sample of extant and fossil capitates are subjected to a series of multivariate comparisons, with results suggesting a variety of locomotor repertoires were present in this early Miocene setting. One of the fossil specimens is uniquely derived among early and middle Miocene capitates, representing the earliest known instance of great ape-like wrist morphology and supporting the presence of a behaviourally advanced ape at Songhor. We suggest Rangwapithecus as this catarrhine's identity, and posit expression of derived, ape-like features as a criterion for distinguishing this taxon from Proconsul africanus. We also introduce a procedure for quantitative estimation of locomotor diversity and find the Tinderet sample to equal or exceed large extant catarrhine groups in this metric, demonstrating greater functional diversity among early catarrhines than previously recognised.

Lumbar vertebral body bone microstructural scaling in small to medium-sized strepsirhines.

Bone mass, architecture, and tissue mineral density contribute to bone strength. As body mass (BM) increases any one or combination of these properties could change to maintain structural integrity. To better understand the structural origins of vertebral fragility and gain insight into the mechanisms that govern bone adaptation, we conducted an integrative analysis of bone mass and microarchitecture in the last lumbar vertebral body from nine strepsirhine species, ranging in size from 42 g (Microcebus rufus) to 2,440 g (Eulemur macaco). Bone mass and architecture were assessed via µCT for the whole body and spherical volumes of interest (VOI). Allometric equations were estimated and compared with predictions for geometric scaling, assuming axial compression as the dominant loading regime. Bone mass, microarchitectural, and vertebral body geometric variables predominantly scaled isometrically. Among structural variables, the degree of anisotropy (Tb.DA) was the only parameter independent of BM and other trabecular architectural variables. Tb.DA was related to positional behavior. Orthograde primates had higher average Tb.DA (1.60) and more craniocaudally oriented trabeculae while lorisines had the lowest Tb.DA (1.25), as well as variably oriented trabeculae. Finally, lorisines had the highest ratio of trabecular bone volume to cortical shell volume (∼3x) and while there appears to be flexibility in this ratio, the total bone volume (trabecular + cortical) scales isometrically (BM(1.23) , r(2) = 0.93) and appears tightly constrained. The common pattern of isometry in our measurements leaves open the question of how vertebral bodies in strepsirhine species compensate for increased BM.

Specimen size and porosity can introduce error into microCT-based tissue mineral density measurements.

The accurate measurement of tissue mineral density, rho(m), in specimens of unequal size or quantities of bone mineral using polychromatic microCT systems is important, since studies often compare samples with a range of sizes and bone densities. We assessed the influence of object size on microCT measurements of rho(m) using (1) hydroxyapatite rods (HA), (2) precision-manufactured aluminum foams (AL) simulating trabecular bone structure, and (3) bovine cortical bone cubes (BCt). Two beam-hardening correction (BHC) algorithms, determined using a 200 and 1200 mg/cm(3) HA wedge phantom, were used to calculate rho(m) of the HA and BCt. The 200 mg/cm(3) and an aluminum BHC algorithm were used to calculate the linear attenuation coefficients of the AL foams. Equivalent rho(m) measurements of 500, 1000, and 1500 mg HA/cm(3) rods decreased (r(2)>0.96, p<0.05 for all) as HA rod diameter increased in the 200 mg/cm(3) BHC data. Errors averaged 8.2% across these samples and reached as high as 29.5%. Regression analyses suggested no size effects in the 1200 mg/cm(3) BHC data but differences between successive sizes still reached as high as 13%. The linear attenuation coefficients of the AL foams increased up to approximately 6% with increasing volume fractions (r(2)>0.81, p<0.05 for all) but the strength of the size-related error was also BHC dependent. Equivalent rho(m) values were inversely correlated with BCt cube size (r(2)>0.92, p<0.05). Use of the 1200 mg/cm(3) BHC ameliorated the size-related artifact compared to the 200 mg/cm(3) BHC but errors with this BHC were still significant and ranged between 5% and 12%. These results demonstrate that object size, structure, and BHC algorithm can influence microCT measurements of rho(m). Measurements of rho(m) of specimens of unequal size or quantities of bone mineral must be interpreted with caution unless appropriate steps are taken to minimize these potential artifacts.