From Detection to Protection: The Role of Optical Sensors, Robots, and Artificial Intelligence in Modern Plant Disease Management.

In the past decade, there has been a recognized need for innovative methods to monitor and manage plant diseases, aiming to meet the precision demands of modern agriculture. Over the last 15 years, significant advances in the detection, monitoring, and management of plant diseases have been made, largely propelled by cutting-edge technologies. Recent advances in precision agriculture have been driven by sophisticated tools such as optical sensors, artificial intelligence, microsensor networks, and autonomous driving vehicles. These technologies have enabled the development of novel cropping systems, allowing for targeted management of crops, contrasting with the traditional, homogeneous treatment of large crop areas. The research in this field is usually a highly collaborative and interdisciplinary endeavor. It brings together experts from diverse fields such as plant pathology, computer science, statistics, engineering, and agronomy to forge comprehensive solutions. Despite the progress, translating the advancements in the precision of decision-making or automation into agricultural practice remains a challenge. The knowledge transfer to agricultural practice and extension has been particularly challenging. Enhancing the accuracy and timeliness of disease detection continues to be a priority, with data-driven artificial intelligence systems poised to play a pivotal role. This perspective article addresses critical questions and challenges faced in the implementation of digital technologies for plant disease management. It underscores the urgency of integrating innovative technological advances with traditional integrated pest management. It highlights unresolved issues regarding the establishment of control thresholds for site-specific treatments and the necessary alignment of digital technology use with regulatory frameworks. Importantly, the paper calls for intensified research efforts, widespread knowledge dissemination, and education to optimize the application of digital tools for plant disease management, recognizing the intersection of technology's potential with its current practical limitations.

Automatic Scoring of Rhizoctonia Crown and Root Rot Affected Sugar Beet Fields from Orthorectified UAV Images Using Machine Learning.

Rhizoctonia crown and root rot (RCRR), caused by Rhizoctonia solani, can cause severe yield and quality losses in sugar beet. The most common strategy to control the disease is the development of resistant varieties. In the breeding process, field experiments with artificial inoculation are carried out to evaluate the performance of genotypes and varieties. The phenotyping process in breeding trials requires constant monitoring and scoring by skilled experts. This work is time demanding and shows bias and heterogeneity according to the experience and capacity of each individual person. Optical sensors and artificial intelligence have demonstrated great potential to achieve higher accuracy than human raters and the possibility to standardize phenotyping applications. A workflow combining red-green-blue and multispectral imagery coupled to an unmanned aerial vehicle (UAV), as well as machine learning techniques, was applied to score diseased plants and plots affected by RCRR. Georeferenced annotation of UAV-orthorectified images was carried out. With the annotated images, five convolutional neural networks were trained to score individual plants. The training was carried out with different image analysis strategies and data augmentation. The custom convolutional neural network trained from scratch together with pretrained MobileNet showed the best precision in scoring RCRR (0.73 to 0.85). The average per plot of spectral information was used to score the plots, and the benefit of adding the information obtained from the score of individual plants was compared. For this purpose, machine learning models were trained together with data management strategies, and the best-performing model was chosen. A combined pipeline of random forest and k-nearest neighbors has shown the best weighted precision (0.67). This research provides a reliable workflow for detecting and scoring RCRR based on aerial imagery. RCRR is often distributed heterogeneously in trial plots; therefore, considering the information from individual plants of the plots showed a significant improvement in UAV-based automated monitoring routines.

Hyperspectral Imaging in the UV Range Allows for Differentiation of Sugar Beet Diseases Based on Changes in Secondary Plant Metabolites.

Fungal infections trigger defense or signaling responses in plants, leading to various changes in plant metabolites. The changes in metabolites, for example chlorophyll or flavonoids, have long been detectable using time-consuming destructive analytical methods including high-performance liquid chromatography or photometric determination. Recent plant phenotyping studies have revealed that hyperspectral imaging (HSI) in the UV range can be used to link spectral changes with changes in plant metabolites. To compare established destructive analytical methods with new nondestructive hyperspectral measurements, the interaction between sugar beet leaves and the pathogens Cercospora beticola, which causes Cercospora leaf spot disease (CLS), and Uromyces betae, which causes sugar beet rust (BR), was investigated. With the help of destructive analyses, we showed that both diseases have different effects on chlorophylls, carotenoids, flavonoids, and several phenols. Nondestructive hyperspectral measurements in the UV range revealed different effects of CLS and BR on plant metabolites resulting in distinct reflectance patterns. Both diseases resulted in specific spectral changes that allowed differentiation between the two diseases. Machine learning algorithms enabled the differentiation between the symptom classes and recognition of the two sugar beet diseases. Feature importance analysis identified specific wavelengths important to the classification, highlighting the utility of the UV range. The study demonstrates that HSI in the UV range is a promising, nondestructive tool to investigate the influence of plant diseases on plant physiology and biochemistry.

Disease Incidence and Severity of Cercospora Leaf Spot in Sugar Beet Assessed by Multispectral Unmanned Aerial Images and Machine Learning.

Disease incidence (DI) and metrics of disease severity are relevant parameters for decision making in plant protection and plant breeding. To develop automated and sensor-based routines, a sugar beet variety trial was inoculated with Cercospora beticola and monitored with a multispectral camera system mounted to an unmanned aerial vehicle (UAV) over the vegetation period. A pipeline based on machine learning methods was established for image data analysis and extraction of disease-relevant parameters. Features based on the digital surface model, vegetation indices, shadow condition, and image resolution improved classification performance in comparison with using single multispectral channels in 12 and 6% of diseased and soil regions, respectively. With a postprocessing step, area-related parameters were computed after classification. Results of this pipeline also included extraction of DI and disease severity (DS) from UAV data. The calculated area under disease progress curve of DS was 2,810.4 to 7,058.8%.days for human visual scoring and 1,400.5 to 4,343.2%.days for UAV-based scoring. Moreover, a sharper differentiation of varieties compared with visual scoring was observed in area-related parameters such as area of complete foliage (AF), area of healthy foliage (AH), and mean area of lesion by unit of foliage ([Formula: see text]). These advantages provide the option to replace the laborious work of visual disease assessments in the field with a more precise, nondestructive assessment via multispectral data acquired by UAV flights.[Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

A Hyperspectral Library of Foliar Diseases of Wheat.

This work established a hyperspectral library of important foliar diseases of wheat induced by different fungal pathogens, representing a time series from infection to symptom appearance for the purpose of detecting spectral changes. The data were generated under controlled conditions at the leaf scale. The transition from healthy to diseased leaf tissue was assessed, and spectral shifts were identified and used in combination with histological investigations to define developmental stages in pathogenesis for each disease. The spectral signatures of each plant disease that indicate a specific developmental stage during pathogenesis, defined as turning points, were combined into a spectral library. Machine learning analysis methods were applied and compared to test the potential of this library to detect and quantify foliar diseases in hyperspectral images. All evaluated classifiers had high accuracy (≤99%) for the detection and identification of both biotrophic and necrotrophic fungi. The potential of applying spectral analysis methods in combination with a spectral library for the detection and identification of plant diseases is demonstrated. Further evaluation and development of these algorithms should contribute to a robust detection and identification system for plant diseases at different developmental stages and the promotion and development of site-specific management techniques for plant diseases under field conditions.

Statistical shape analysis of tap roots: a methodological case study on laser scanned sugar beets.

BACKGROUND: The efficient and robust statistical analysis of the shape of plant organs of different cultivars is an important investigation issue in plant breeding and enables a robust cultivar description within the breeding progress. Laserscanning is a highly accurate and high resolution technique to acquire the 3D shape of plant surfaces. The computation of a shape based principal component analysis (PCA) built on concepts from continuum mechanics has proven to be an effective tool for a qualitative and quantitative shape examination. RESULTS: The shape based PCA was used for a statistical analysis of 140 sugar beet roots of different cultivars. The calculation of the mean sugar beet root shape and the description of the main variations was possible. Furthermore, unknown and individual tap roots could be attributed to their cultivar by means of a robust classification tool based on the PCA results. CONCLUSION: The method demonstrates that it is possible to identify principal modes of root shape variations automatically and to quantify associated variances out of laserscanned 3D sugar beet tap root models. The introduced approach is not limited to the 3D shape description by laser scanning. A transfer to 3D MRI or radar data is also conceivable.

Comparison and Combination of Thermal, Fluorescence, and Hyperspectral Imaging for Monitoring Fusarium Head Blight of Wheat on Spikelet Scale.

Optical sensors have shown high capabilities to improve the detection and monitoring of plant disease development. This study was designed to compare the feasibility of different sensors to characterize Fusarium head blight (FHB) caused by Fusarium graminearum and Fusarium culmorum. Under controlled conditions, time-series measurements were performed with infrared thermography (IRT), chlorophyll fluorescence imaging (CFI), and hyperspectral imaging (HSI) starting 3 days after inoculation (dai). IRT allowed the visualization of temperature differences within the infected spikelets beginning 5 dai. At the same time, a disorder of the photosynthetic activity was confirmed by CFI via maximal fluorescence yields of spikelets (Fm) 5 dai. Pigment-specific simple ratio PSSRa and PSSRb derived from HSI allowed discrimination between Fusarium-infected and non-inoculated spikelets 3 dai. This effect on assimilation started earlier and was more pronounced with F. graminearum. Except the maximum temperature difference (MTD), all parameters derived from different sensors were significantly correlated with each other and with disease severity (DS). A support vector machine (SVM) classification of parameters derived from IRT, CFI, or HSI allowed the differentiation between non-inoculated and infected spikelets 3 dai with an accuracy of 78, 56 and 78%, respectively. Combining the IRT-HSI or CFI-HSI parameters improved the accuracy to 89% 30 dai.

Infrared Thermography as a Non-Invasive Tool to Explore Differences in the Musculoskeletal System of Children with Hemophilia Compared to an Age-Matched Healthy Group.

Recurrent joint bleeds and silent bleeds are the most common clinical feature in patients with hemophilia. Every bleed causes an immediate inflammatory response and is the leading cause of chronic crippling arthropathy. With the help of infrared thermography we wanted to detect early differences between a group of clinical non-symptomatic children with hemophilia (CWH) with no history of clinically detected joint bleeds and a healthy age-matched group of children. This could help to discover early inflammation and help implement early treatment and preventative strategies. It could be demonstrated that infrared thermography is sensitive enough to detect more signs of early inflammatory response in the CWH than in healthy children. It seems to detect more side differences in temperature than clinical examination of silent symptoms detects tender points. Silent symptoms/tender points seem to be combined with early local inflammation. Using such a non-invasive and sensor-based early detection, prevention of overloading and bleeding might be achieved.

Specim IQ: Evaluation of a New, Miniaturized Handheld Hyperspectral Camera and Its Application for Plant Phenotyping and Disease Detection.

Hyperspectral imaging sensors are promising tools for monitoring crop plants or vegetation in different environments. Information on physiology, architecture or biochemistry of plants can be assessed non-invasively and on different scales. For instance, hyperspectral sensors are implemented for stress detection in plant phenotyping processes or in precision agriculture. Up to date, a variety of non-imaging and imaging hyperspectral sensors is available. The measuring process and the handling of most of these sensors is rather complex. Thus, during the last years the demand for sensors with easy user operability arose. The present study introduces the novel hyperspectral camera Specim IQ from Specim (Oulu, Finland). The Specim IQ is a handheld push broom system with integrated operating system and controls. Basic data handling and data analysis processes, such as pre-processing and classification routines are implemented within the camera software. This study provides an introduction into the measurement pipeline of the Specim IQ as well as a radiometric performance comparison with a well-established hyperspectral imager. Case studies for the detection of powdery mildew on barley at the canopy scale and the spectral characterization of Arabidopsis thaliana mutants grown under stressed and non-stressed conditions are presented.

Spectral Patterns Reveal Early Resistance Reactions of Barley Against Blumeria graminis f. sp. hordei.

Differences in early plant-pathogen interactions are mainly characterized by using destructive methods. Optical sensors are advanced techniques for phenotyping host-pathogen interactions on different scales and for detecting subtle plant resistance responses against pathogens. A microscope with a hyperspectral camera was used to study interactions between Blumeria graminis f. sp. hordei and barley (Hordeum vulgare) genotypes with high susceptibility or resistance due to hypersensitive response (HR) and papilla formation. Qualitative and quantitative assessment of pathogen development was used to explain changes in hyperspectral signatures. Within 48 h after inoculation, genotype-specific changes in the green and red range (500 to 690 nm) and a blue shift of the red-edge inflection point were observed. Manual analysis indicated resistance-specific reflectance patterns from 1 to 3 days after inoculation. These changes could be linked to host plant modifications depending on individual host-pathogen interactions. Retrospective analysis of hyperspectral images revealed spectral characteristics of HR against B. graminis f. sp. hordei. For early HR detection, an advanced data mining approach localized HR spots before they became visible on the RGB images derived from hyperspectral imaging. The link among processes during pathogenesis and host resistance to changes in hyperspectral signatures provide evidence that sensor-based phenotyping is suitable to advance time-consuming and cost-expensive visual rating of plant disease resistances.

Improvement of Lesion Phenotyping in Cercospora beticola-Sugar Beet Interaction by Hyperspectral Imaging.

Cercospora leaf spot (CLS) caused by Cercospora beticola is the most destructive leaf disease of sugar beet and may cause high losses in yield and quality. Breeding and cultivation of disease-resistant varieties is an important strategy to control this economically relevant plant disease. Reliable and robust resistance parameters are required to promote breeding progress. CLS lesions on five different sugar beet genotypes incubated under controlled conditions were analyzed for phenotypic differences related to field resistance to C. beticola. Lesions of CLS were rated by classical quantitative and qualitative methods in combination with noninvasive hyperspectral imaging. Calculating the ratio of lesion center to lesion margin, four CLS phenotypes were identified that vary in size and spatial composition. Lesions could be differentiated into subareas based on their spectral characteristics in the range of 400 to 900 nm. Sugar beet genotypes with lower disease severity typically had lesions with smaller centers compared with highly susceptible genotypes. Accordingly, the number of conidia per diseased leaf area on resistant plants was lower. The assessment of lesion phenotypes by hyperspectral imaging with regard to sporulation may be an appropriate method to identify subtle differences in disease resistance. The spectral and spatial analysis of the lesions has the potential to improve the screening process in breeding for CLS resistance.

Plant Disease Detection by Imaging Sensors - Parallels and Specific Demands for Precision Agriculture and Plant Phenotyping.

Early and accurate detection and diagnosis of plant diseases are key factors in plant production and the reduction of both qualitative and quantitative losses in crop yield. Optical techniques, such as RGB imaging, multi- and hyperspectral sensors, thermography, or chlorophyll fluorescence, have proven their potential in automated, objective, and reproducible detection systems for the identification and quantification of plant diseases at early time points in epidemics. Recently, 3D scanning has also been added as an optical analysis that supplies additional information on crop plant vitality. Different platforms from proximal to remote sensing are available for multiscale monitoring of single crop organs or entire fields. Accurate and reliable detection of diseases is facilitated by highly sophisticated and innovative methods of data analysis that lead to new insights derived from sensor data for complex plant-pathogen systems. Nondestructive, sensor-based methods support and expand upon visual and/or molecular approaches to plant disease assessment. The most relevant areas of application of sensor-based analyses are precision agriculture and plant phenotyping.

Automated interpretation of 3D laserscanned point clouds for plant organ segmentation.

BACKGROUND: Plant organ segmentation from 3D point clouds is a relevant task for plant phenotyping and plant growth observation. Automated solutions are required to increase the efficiency of recent high-throughput plant phenotyping pipelines. However, plant geometrical properties vary with time, among observation scales and different plant types. The main objective of the present research is to develop a fully automated, fast and reliable data driven approach for plant organ segmentation. RESULTS: The automated segmentation of plant organs using unsupervised, clustering methods is crucial in cases where the goal is to get fast insights into the data or no labeled data is available or costly to achieve. For this we propose and compare data driven approaches that are easy-to-realize and make the use of standard algorithms possible. Since normalized histograms, acquired from 3D point clouds, can be seen as samples from a probability simplex, we propose to map the data from the simplex space into Euclidean space using Aitchisons log ratio transformation, or into the positive quadrant of the unit sphere using square root transformation. This, in turn, paves the way to a wide range of commonly used analysis techniques that are based on measuring the similarities between data points using Euclidean distance. We investigate the performance of the resulting approaches in the practical context of grouping 3D point clouds and demonstrate empirically that they lead to clustering results with high accuracy for monocotyledonous and dicotyledonous plant species with diverse shoot architecture. CONCLUSION: An automated segmentation of 3D point clouds is demonstrated in the present work. Within seconds first insights into plant data can be deviated - even from non-labelled data. This approach is applicable to different plant species with high accuracy. The analysis cascade can be implemented in future high-throughput phenotyping scenarios and will support the evaluation of the performance of different plant genotypes exposed to stress or in different environmental scenarios.

Supplemental blue LED lighting array to improve the signal quality in hyperspectral imaging of plants.

Hyperspectral imaging systems used in plant science or agriculture often have suboptimal signal-to-noise ratio in the blue region (400-500 nm) of the electromagnetic spectrum. Typically there are two principal reasons for this effect, the low sensitivity of the imaging sensor and the low amount of light available from the illuminating source. In plant science, the blue region contains relevant information about the physiology and the health status of a plant. We report on the improvement in sensitivity of a hyperspectral imaging system in the blue region of the spectrum by using supplemental illumination provided by an array of high brightness light emitting diodes (LEDs) with an emission peak at 470 nm.

Low-cost 3D systems: suitable tools for plant phenotyping.

Over the last few years, 3D imaging of plant geometry has become of significant importance for phenotyping and plant breeding. Several sensing techniques, like 3D reconstruction from multiple images and laser scanning, are the methods of choice in different research projects. The use of RGBcameras for 3D reconstruction requires a significant amount of post-processing, whereas in this context, laser scanning needs huge investment costs. The aim of the present study is a comparison between two current 3D imaging low-cost systems and a high precision close-up laser scanner as a reference method. As low-cost systems, the David laser scanning system and the Microsoft Kinect Device were used. The 3D measuring accuracy of both low-cost sensors was estimated based on the deviations of test specimens. Parameters extracted from the volumetric shape of sugar beet taproots, the leaves of sugar beets and the shape of wheat ears were evaluated. These parameters are compared regarding accuracy and correlation to reference measurements. The evaluation scenarios were chosen with respect to recorded plant parameters in current phenotyping projects. In the present study, low-cost 3D imaging devices have been shown to be highly reliable for the demands of plant phenotyping, with the potential to be implemented in automated application procedures, while saving acquisition costs. Our study confirms that a carefully selected low-cost sensor.

A 3D printed plant model for accurate and reliable 3D plant phenotyping.

BACKGROUND: This study addresses the importance of precise referencing in 3-dimensional (3D) plant phenotyping, which is crucial for advancing plant breeding and improving crop production. Traditionally, reference data in plant phenotyping rely on invasive methods. Recent advancements in 3D sensing technologies offer the possibility to collect parameters that cannot be referenced by manual measurements. This work focuses on evaluating a 3D printed sugar beet plant model as a referencing tool. RESULTS: Fused deposition modeling has turned out to be a suitable 3D printing technique for creating reference objects in 3D plant phenotyping. Production deviations of the created reference model were in a low and acceptable range. We were able to achieve deviations ranging from -10 mm to +5 mm. In parallel, we demonstrated a high-dimensional stability of the reference model, reaching only ±4 mm deformation over the course of 1 year. Detailed print files, assembly descriptions, and benchmark parameters are provided, facilitating replication and benefiting the research community. CONCLUSION: Consumer-grade 3D printing was utilized to create a stable and reproducible 3D reference model of a sugar beet plant, addressing challenges in referencing morphological parameters in 3D plant phenotyping. The reference model is applicable in 3 demonstrated use cases: evaluating and comparing 3D sensor systems, investigating the potential accuracy of parameter extraction algorithms, and continuously monitoring these algorithms in practical experiments in greenhouse and field experiments. Using this approach, it is possible to monitor the extraction of a nonverifiable parameter and create reference data. The process serves as a model for developing reference models for other agricultural crops.

Surface feature based classification of plant organs from 3D laserscanned point clouds for plant phenotyping.

BACKGROUND: Laserscanning recently has become a powerful and common method for plant parameterization and plant growth observation on nearly every scale range. However, 3D measurements with high accuracy, spatial resolution and speed result in a multitude of points that require processing and analysis. The primary objective of this research has been to establish a reliable and fast technique for high throughput phenotyping using differentiation, segmentation and classification of single plants by a fully automated system. In this report, we introduce a technique for automated classification of point clouds of plants and present the applicability for plant parameterization. RESULTS: A surface feature histogram based approach from the field of robotics was adapted to close-up laserscans of plants. Local geometric point features describe class characteristics, which were used to distinguish among different plant organs. This approach has been proven and tested on several plant species. Grapevine stems and leaves were classified with an accuracy of up to 98%. The proposed method was successfully transferred to 3D-laserscans of wheat plants for yield estimation. Wheat ears were separated with an accuracy of 96% from other plant organs. Subsequently, the ear volume was calculated and correlated to the ear weight, the kernel weights and the number of kernels. Furthermore the impact of the data resolution was evaluated considering point to point distances between 0.3 and 4.0 mm with respect to the classification accuracy. CONCLUSION: We introduced an approach using surface feature histograms for automated plant organ parameterization. Highly reliable classification results of about 96% for the separation of grapevine and wheat organs have been obtained. This approach was found to be independent of the point to point distance and applicable to multiple plant species. Its reliability, flexibility and its high order of automation make this method well suited for the demands of high throughput phenotyping. HIGHLIGHTS: • Automatic classification of plant organs using geometrical surface information• Transfer of analysis methods for low resolution point clouds to close-up laser measurements of plants• Analysis of 3D-data requirements for automated plant organ classification.

Fusarium Head Blight on Wheat: Biology, Modern Detection and Diagnosis and Integrated Disease Management.

Fusarium head blight (FHB) is a major threat for wheat production worldwide. Most reviews focus on Fusarium graminearum as a main causal agent of FHB. However, different Fusarium species are involved in this disease complex. These species differ in their geographic adaptation and mycotoxin profile. The incidence of FHB epidemics is highly correlated with weather conditions, especially rainy days with warm temperatures at anthesis and an abundance of primary inoculum. Yield losses due to the disease can reach up to 80% of the crop. This review summarizes the Fusarium species involved in the FHB disease complex with the corresponding mycotoxin profiles, disease cycle, diagnostic methods, the history of FHB epidemics, and the management strategy of the disease. In addition, it discusses the role of remote sensing technology in the integrated management of the disease. This technology can accelerate the phenotyping process in the breeding programs aiming at FHB-resistant varieties. Moreover, it can support the decision-making strategies to apply fungicides via monitoring and early detection of the diseases under field conditions. It can also be used for selective harvest to avoid mycotoxin-contaminated plots in the field.

Workflow for phenotyping sugar beet roots by automated evaluation of cell characteristics and tissue arrangement using digital image processing.

BACKGROUND: Cell characteristics, including cell type, size, shape, packing, cell-to-cell-adhesion, intercellular space, and cell wall thickness, influence the physical characteristics of plant tissues. Genotypic differences were found concerning damage susceptibility related to beet texture for sugar beet (Beta vulgaris). Sugar beet storage roots are characterized by heterogeneous tissue with several cambium rings surrounded by small-celled vascular tissue and big-celled sugar-storing parenchyma between the rings. This study presents a procedure for phenotyping heterogeneous tissues like beetroots by imaging. RESULTS: Ten Beta genotypes (nine sugar beet and one fodder beet) were included to establish a pipeline for the automated histologic evaluation of cell characteristics and tissue arrangement using digital image processing written in the programming language R. The identification of cells has been validated by comparison with manual cell identification. Cells are reliably discriminated from intercellular spaces, and cells with similar morphological features are assigned to biological tissue types. CONCLUSIONS: Genotypic differences in cell diameter and cell arrangement can straightforwardly be phenotyped by the presented workflow. The presented routine can further identify genotypic differences in cell diameter and cell arrangement during early growth stages and between sugar storage capabilities.

Integrated Nematode Management in a World in Transition: Constraints, Policy, Processes, and Technologies for the Future.

Plant-parasitic nematodes are one of the most insidious pests limiting agricultural production, parasitizing mostly belowground and occasionally aboveground plant parts. They are an important and underestimated component of the estimated 30% yield loss inflicted on crops globally by biotic constraints. Nematode damage is intensified by interactions with biotic and abiotic factors constraints: soilborne pathogens, soil fertility degradation, reduced soil biodiversity, climate variability, and policies influencing the development of improved management options. This review focuses on the following topics: (a) biotic and abiotic constraints, (b) modification of production systems, (c) agricultural policies, (d) the microbiome, (e) genetic solutions, and (f) remote sensing. Improving integrated nematode management (INM) across all scales of agricultural production and along the Global North-Global South divide, where inequalities influence access to technology, is discussed. The importance of the integration of technological development in INM is critical to improving food security and human well-being in the future.