Depairing Current at High Magnetic Fields in Vortex-Free High-Temperature Superconducting Nanowires.

Superconductors are essential in many present and future technologies, from large-scale devices for medical imaging, accelerators, or fusion experiments to ultra-low-power superconducting electronics. However, their potential applicability, and particularly that of high-temperature superconductors (HTS), is severely affected by limited performances at large magnetic fields and high temperatures, where their use is most needed. One of the main reasons for these limitations is the presence of quantized vortices, whose movements result in losses, internal noise, and reduced performances. The conventional strategy to overcome the flow of vortices is to pin them along artificial defects. Here, we theoretically and experimentally demonstrate that critical-current density in high-temperature superconductors can reach unprecedented high values at high fields and temperatures by preventing vortex entry. By tailoring the geometry, that is, reducing the width, W, of nanowire-patterned HTS films, the range of the Meissner state, for which no vortices are present, is extended up to very large applied field values, on the order of ∼1 T. Current densities on the order of the depairing current can be sustained under high fields for a wide range of temperatures. Results may be relevant both for devising new conductors carrying depairing-current values at high temperatures and large magnetic fields and for reducing flux noise in sensors and quantum systems.

Performance comparison of two sensors based on surface plasmon resonance in a plastic optical fiber.

In silica optical fiber Surface Plasmon Resonance (SPR)-based sensors, an increase in fiber core diameter produces a corresponding increase in the sensitivity and Signal to Noise Ratio (SNR). In Plastic Optical Fiber (POF) realized in PMMA there are different influences of design parameters on the performance, as both sensitivity and SNR are concerned. In particular, the SNR, for different refractive index values of the analyte, in a 250 µm diameter POF is greater than the one in 1,000 µm diameter POF. On the other hand, the sensitivity, for the same refractive index values of the analyte, in a 1,000 µm diameter POF is greater than the one in a 250 µm diameter POF. The results of an experimental analysis demonstrating the above behavior are reported.

Direct transition from quantum escape to a phase diffusion regime in YBaCuO biepitaxial Josephson junctions.

Dissipation encodes the interaction of a quantum system with the environment and regulates the activation regimes of a Brownian particle. We have engineered grain boundary biepitaxial YBaCuO junctions to drive a direct transition from a quantum activated running state to a phase diffusion regime. The crossover to the quantum regime is tuned by the magnetic field and dissipation is described by a fully consistent set of junction parameters. To unravel phase dynamics in moderately damped systems is of general interest for advances in the comprehension of retrapping phenomena and in view of quantum hybrid technology.

High-Quality Ferromagnetic Josephson Junctions Based on Aluminum Electrodes.

Aluminum Josephson junctions are the building blocks for the realization of superconducting quantum bits. Attention has been also paid to hybrid ferromagnetic Josephson junctions, which allow switching between different magnetic states, making them interesting for applications such as cryogenic memories, single-photon detectors, and spintronics. In this paper, we report on the fabrication and characterization of high-quality ferromagnetic Josephson junctions based on aluminum technology. We employed an innovative fabrication process inspired by niobium-based technology, allowing us to obtain very high-quality hybrid aluminum Josephson junctions; thus, supporting the use of ferromagnetic Josephson junctions in advanced quantum circuits. The fabrication process is described in detail and the main DC transport properties at low temperatures (current-voltage characteristic, critical current as a function of the temperature, and the external magnetic field) are reported. Here, we illustrate in detail the fabrication process, as well as the main DC transport properties at low temperatures (current-voltage characteristic, critical current as a function of the temperature, and the external magnetic field).

Low cost sensors based on SPR in a plastic optical fiber for biosensor implementation.

This paper reports the fabrication and testing of two configurations of optical sensor systems based on Surface Plasmon Resonance (SPR) at the interface of a liquid sample and sandwiched structures realized starting from the exposed core of a Plastic Optical Fiber (POF). The proposed geometries have proven to be suitable for measuring the refractive indexes of liquids whose refractive index falls around 1.35. Furthermore, the proposed sensing head, being low cost and relatively easy to realize, may be very attractive for biosensor implementation.

Vortex Lattice Instabilities in YBa2Cu3O7-x Nanowires.

High-resolution focused ion beam lithography has been used to fabricate YBa2Cu3O7-x (YBCO) wires with nanometric lateral dimensions. In the present work, we investigate Flux-flow instabilities in nanowires of different widths, showing sudden voltage switching jumps from the superconducting to the normal state. We present an extensive study on the temperature and field dependence of the switching characteristics which reveal that voltage jumps become less abrupt as the temperature increases, and disappear at the vortex-liquid state. On the contrary, the current distribution at the critical point becomes narrower at high temperatures. Sharp voltage switchings very close to the critical current density can be obtained by reducing the width of the nanowires, making them very appealing for practical applications.

Statistics of localized phase slips in tunable width planar point contacts.

The main dissipation mechanism in superconducting nanowires arises from phase slips. Thus far, most of the studies focus on long nanowires where coexisting events appear randomly along the nanowire. In the present work we investigate highly confined phase slips at the contact point of two superconducting leads. Profiting from the high current crowding at this spot, we are able to shrink in-situ the nanoconstriction. This procedure allows us to investigate, in the very same sample, thermally activated phase slips and the probability density function of the switching current Isw needed to trigger an avalanche of events. Furthermore, for an applied current larger than Isw, we unveil the existence of two distinct thermal regimes. One corresponding to efficient heat removal where the constriction and bath temperatures remain close to each other, and another one in which the constriction temperature can be substantially larger than the bath temperature leading to the formation of a hot spot. Considering that the switching current distribution depends on the exact thermal properties of the sample, the identification of different thermal regimes is of utmost importance for properly interpreting the dissipation mechanisms in narrow point contacts.

Synthesis and characterization of electrically conductive polyethylene-supported graphene films.

We describe a simple mechanical approach for low-density polyethylene film coating by multilayer graphene. The technique is based on the exfoliation of nanocrystalline graphite (few-layer graphene) by application of shear stress and allows to obtain thin graphene layers on the plastic substrate. We report on the temperature dependence of electrical resistance behaviors in films of different thickness. The experimental results suggest that the semiconducting behavior observed at low temperature can be described in the framework of the Efros-Shklovskii variable-range-hopping model. The obtained films exhibit good electrical conductivity and transparency in the visible spectral region. PACS: 72.80.Vp; 78.67.Wj; 78.66.Qn; 85.40.Hp.