Biodegradation Studies of Polyhydroxybutyrate and Polyhydroxybutyrate-co-Polyhydroxyvalerate Films in Soil.

Due to increased environmental pressures, significant research has focused on finding suitable biodegradable plastics to replace ubiquitous petrochemical-derived polymers. Polyhydroxyalkanoates (PHAs) are a class of polymers that can be synthesized by microorganisms and are biodegradable, making them suitable candidates. The present study looks at the degradation properties of two PHA polymers: polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-polyhydroxyvalerate (PHBV; 8 wt.% valerate), in two different soil conditions: soil fully saturated with water (100% relative humidity, RH) and soil with 40% RH. The degradation was evaluated by observing the changes in appearance, chemical signatures, mechanical properties, and molecular weight of samples. Both PHB and PHBV were degraded completely after two weeks in 100% RH soil conditions and showed significant reductions in mechanical properties after just three days. The samples in 40% RH soil, however, showed minimal changes in mechanical properties, melting temperatures/crystallinity, and molecular weight over six weeks. By observing the degradation behavior for different soil conditions, these results can pave the way for identifying situations where the current use of plastics can be replaced with biodegradable alternatives.

Polymer Electrolyte Membranes Containing Functionalized Organic/Inorganic Composite for Polymer Electrolyte Membrane Fuel Cell Applications.

To mitigate the dependence on fossil fuels and the associated global warming issues, numerous studies have focused on the development of eco-friendly energy conversion devices such as polymer electrolyte membrane fuel cells (PEMFCs) that directly convert chemical energy into electrical energy. As one of the key components in PEMFCs, polymer electrolyte membranes (PEMs) should have high proton conductivity and outstanding physicochemical stability during operation. Although the perfluorinated sulfonic acid (PFSA)-based PEMs and some of the hydrocarbon-based PEMs composed of rationally designed polymer structures are found to meet these criteria, there is an ongoing and pressing need to improve and fine-tune these further, to be useful in practical PEMFC operation. Incorporation of organic/inorganic fillers into the polymer matrix is one of the methods shown to be effective for controlling target PEM properties including thermal stability, mechanical properties, and physical stability, as well as proton conductivity. Functionalization of organic/inorganic fillers is critical to optimize the filler efficiency and dispersion, thus resulting in significant improvements to PEM properties. This review focused on the structural engineering of functionalized carbon and silica-based fillers and comparisons of the resulting PEM properties. Newly constructed composite membranes were compared to composite membrane containing non-functionalized fillers or pure polymer matrix membrane without fillers.

Fabrication of Cellulose Triacetate Hollow Fiber Membranes for Forward Osmosis-Nanofiltration.

In this study, hollow fiber membranes for forward osmosis using cellulose triacetate were prepared using the non-solvent phase separation method, and the water purification properties of the prepared membranes were tested. In order to optimize the membrane morphology, which affects the membrane performance, 1,4-dioxane and lithium chloride were used as additives. Using the forward osmosis process, the properties of the membrane were investigated according to changes in the factors such as the salt type, salt concentration, and solution temperature. In the nanofiltration process, the water flux was found to increase and the salt rejection to decrease with increasing air gaps, regardless of the type of salt. In contrast, in the forward osmosis process, the water flux increased and the solute rejection value increased in a manner similar to the increasing concentration of solute.

Amorphous Fluoropolymer Membrane for Gas Separation Applications.

Amorphous fluoropolymers have been studied in the past few decades and received extensive attention due to their unique and useful properties. One of the remarkable properties of amorphous fluoropolymers is high fractional free volume (FFV), and they tend to retain large amounts of solvent inside their polymer chains. In this study, amorphous flouoropolymer membranes were employed to examine the influences of the residual solvent and drying condition on the thermal properties, gas permeation behavior, and structure change by the polymer chains. Thermal properties of the produced membranes were characterized by differential scanning calorimetry (DSC) and a thermogravimetric analysis (TGA) to verify the effects of residual solvent. The residual solvent content and the glass transition temperature (Tg) of amorphous fluoropolymer membranes prepared with both solvents decrease with increasing drying temperature. The effect of the thermal treatment method on the d-spacing between the polymer chains of the prepared membranes was investigated using X-ray diffraction (XRD). The d-spacing decreased with drying below the Tg whereas it drastically increased near the Tg because of chain relaxation. From these phenomena, the helium permeability of the membranes treated at 120 °C radically increased. However, the oxygen and nitrogen permeability decreased with decreasing residual solvent content. The glass transition range shifted to higher temperature, from 75 °C to 133 °C, depending on the reduced amount of residual solvent.

Preparation and Characterization of Various Poly(ether ether ketone) Containing Imidazolium Moiety for Anion Exchange Membrane Fuel Cell Application.

In this study, various poly(ether ether ketone) were synthesized using three different monomers and the imidazolium group was introduced into synthesized poly(ether ether ketone)s by using substitution reaction. Synthesized polymers were used to prepare anion exchange membranes and to evaluate its properties. Thermal, chemical and structural properties were carried out using thermogravimetric analysis, nuclear magnetic resonance. The anion exchange membranes with different imidazolium moieties were characterized by several different analytical techniques such as water up take, ion exchange capacity, hydroxide conductivity for checking the possibility to apply the anion exchange membrane fuel cell. Consequently, results of characterization were studied to understand the correlation between stabilities of the membrane and functional group and polymer backbone structures. And we confirm membrane performance was improved by increasing imidazolium cation groups.

Bioactives in cactus (Opuntia ficus-indica) stems possess potent antioxidant and pro-apoptotic activities through COX-2 involvement.

BACKGROUND: Bioactives extracted from cactus (Opuntia ficus-indica) stems were investigated for their chemopreventive activities using human cancer cells in vitro. The bioactives present in crude extracts were detected and quantified using high-performance liquid chromatography. RESULTS: Among all the extracts, such as hexane, ethyl acetate (EtOAc), acetone, methanol (MeOH), and MeOH:water (80:20), the MeOH extract had the highest amount of polyphenolic compounds and the acetone extract exhibited the most potent effect at scavenging the 2,2,-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-di-(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS(•+) ) radical. In addition, most of the extracts, with the exception of hexane, exhibited significant cytotoxicity in human SW480 colon and MCF7 breast cancer cells. Overall, the SW480 cells were more sensitive than the MCF7 cells to the cytotoxic effect of the O. ficus-indica extracts (OFEs). Cell death by OFE treatment caused significant inhibition of cyclooxygenase-2 and increased the Bax/Bcl2 ratio in both SW480 and MCF7 cell lines. However, degradation of poly (ADP-ribose) polymerase was significantly increased by OFE only in the MCF7 cells, thereby inducing apoptosis. CONCLUSION: These findings demonstrate the health-benefit roles, including anti-oxidative and anti-proliferative activities as well as pro-apoptotic effects, of bioactive compounds in OFEs, suggesting a chemopreventive role in human cancer cells.

Preparation and Properties of Polysulfone-poly(ethylene glycol) graft copolymer membrane.

In this study, Graft copolymers composed of PSf backbones and PEG side chains were synthesized to prepare gas separation membranes with enhancing permeability and selectivity on carbon dioxide separation. PSf-g-PEG copolymers were synthesized by two steps, chloromethylation and graft reactions. Grafted PEG segment of PSf was controlled by molecular weight of PEG. Thermal properties of prepared mebrane were studied by TGA and DSC. T(g) of the copolymers was decreased with increasing of molecular weight of PEG. Hydrophilicity of PSf-g-PEG copolymer membrane was measured using contact angle method, and PEG grafted polymers showed lower contact angles due to higher hydrophilicity. Gas permeation properties of CO2 and N2 gases through the membranes were measured using time-lag method. The permeability of CO2 was enhanced with PEG moiety contents and increasing of number of PEG segment. The selectivity of CO2/N2 was increased with introducing of PEG due to higher solubility with CO2 gas.

Preparation and properties of hollow fiber membranes for removing virus and bacteria.

In this study, polysulfone hollow fiber membrane was successfully prepared by phase inversion method for separation of virus and bacteria. When we prepare the hollow fiber membrane, we controlled various factors such as the polymer concentration, air gap and internal coagulation to investigate effect to membrane property. Morphology of surface and cross section of membrane were measured by field emission scanning electron microscope (FE-SEM). Water flux of membrane was measured using test modules. Mean pore diameter of membrane was calculated using rejection of polystyrene (PS) latex beads for separation of virus and bacteria. Flux and mean flow pore diameter of prepared membrane show 800 L/mh, 0.03 µm at 1.0 kgf/cm2. The bacteria removal performance of prepared UF membranes was over 6 logs

Synthesis and characterization of a new poly(octathiophene) based copolymer for organic thin-film transistor.

A new poly(octathiophene) based copolymer was designed and synthesized by the palladium catalyzed Suzuki coupling reaction. The structure of the newly obtained copolymer was confirmed by 1H-NMR and IR. The number-average molecular weight (M(n)) of the polymer was 36,000 with a poly-dispersity index of 1.15. The polymer has good solubility in common solvents such as chloroform, toluene, chlorobenzene, dichlorobenzene and tetrahydrofuran at room temperature. The optical, thermal and electrochemical properties of the polymer were characterized by UV-vis absorption, TGA and DSC and cyclovoltametry, respectively. A thin film transistor using the new polymer as an organic semiconductor was found to exhibit typical p-channel FET characteristics with a hole mobility of 5 x 10(-4) cm2/Vs.

Fully Additively Manufactured Counter Electrodes for Dye-Sensitized Solar Cells.

In dye-sensitized solar cells (DSSCs), the counter electrode (CE) plays a crucial role as an electron transfer agent and regenerator of the redox couple. Unlike conventional CEs that are generally made of glass-based substrates (e.g., FTO/glass), polymer substrates appear to be emerging candidates, owing to their intrinsic properties of lightweight, high durability, and low cost. Despite great promise, current manufacturing methods of CEs on polymeric substrates suffer from serious limitations, including low conductivity, scalability, process complexity, and the need for dedicated vacuum equipment. In the present study, we employ and evaluate a fully additive manufacturing route that can enable the fabrication of CEs for DSSCs in a high-throughput and eco-friendly manner with improved performance. The proposed approach sequentially comprises: (1) material extrusion 3-D printing of polymer substrate; (2) conductive surface metallization through cold spray particle deposition; and (3) over-coating of a thin-layer catalyzer with a graphite pencil. The fabricated electrodes are characterized in terms of microstructure, electrical conductivity, and photo-conversion efficiency. Owing to its promising electrical conductivity (8.5 × 104 S·m-1) and micro-rough surface structure (Ra ≈ 6.32 µm), the DSSCs with the additively manufactured CEs led to ≈2.5-times-higher photo-conversion efficiency than that of traditional CEs made of FTO/glass. The results of the study suggest that the proposed additive manufacturing approach can advance the field of DSSCs by addressing the limitations of conventional CE manufacturing platforms.

The complete chloroplast genome of Philodendron hederaceum (Jacq.) Schott 1829 (Alismatales: Araceae).

Philodendron hederaceum (Jacq.) Schott 1829, a species of the Araceae family, is a foliage plant of ornamental value. The complete chloroplast genome sequence of Philodendron hederaceum was obtained by the de novo assembly of NovaSeq 6000 (Illumina Co., San Diego, CA) paired-end short reads and Oxford Nanopore long reads. The complete chloroplast genome of P. hederaceum was 168,609 bp in length, with a large single-copy (LSC) region of 94,393 bp, a small single-copy (SSC) region of 25,774 bp, and a pair of identical inverted repeat regions (IRs) of 24,221 bp. The genome contained a total of 129 genes, including 85 protein-coding genes, 36 transfer RNA (tRNA) genes, and eight ribosomal RNA (rRNA) genes. The phylogenetic analysis of P. hederaceum with 19 related species and two outgroup species revealed the closest taxonomical relationship with Philodendron lanceolatum in the Araceae family.

Multilevel Conductance States of Vapor-Transport-Deposited Sb2S3 Memristors Achieved via Electrical and Optical Modulation.

The pursuit of advanced brain-inspired electronic devices and memory technologies has led to explore novel materials by processing multimodal and multilevel tailored conductive properties as the next generation of semiconductor platforms, due to von Neumann architecture limits. Among such materials, antimony sulfide (Sb2S3) thin films exhibit outstanding optical and electronic properties, and therefore, they are ideal for applications such as thin-film solar cells and nonvolatile memory systems. This study investigates the conduction modulation and memory functionalities of Sb2S3 thin films deposited via the vapor transport deposition technique. Experimental results indicate that the Ag/Sb2S3/Pt device possesses properties suitable for memory applications, including low operational voltages, robust endurance, and reliable switching behavior. Further, the reproducibility and stability of these properties across different device batches validate the reliability of these devices for practical implementation. Moreover, Sb2S3-based memristors exhibit artificial neuroplasticity with prolonged stability, promising considerable advancements in neuromorphic computing. Leveraging the photosensitivity of Sb2S3 enables the Ag/Sb2S3/Pt device to exhibit significant low operating potential and conductivity modulation under optical stimulation for memory applications. This research highlights the potential applications of Sb2S3 in future memory devices and optoelectronics and in shaping electronics with versatility.

Robust anion exchange membranes based on ionic liquid grafted chitosan/polyvinyl alcohol/quaternary ammonium functionalized silica for polymer electrolyte membrane fuel cells.

In this study, 1-bromohexyl-1methylpiperidinium bromide (Br-6-MPRD) ionic liquid grafted quaternized chitosan (QCS) and polyvinyl alcohol (PVA) blends were composited with glycidyl trimethyl ammonium chloride (GTMAC) quaternized silica (QSiO2) at different dosages. Glutaraldehyde (GA) crosslinked the membranes and then processed into hydroxide form with an aqueous potassium hydroxide solution. The resultant IL-QCS/PVA/QSiO2 membranes exhibit significantly improved ionic conductivity, moderate water absorption and swelling ratio compared with the pristine IL-QCS/PVA anion exchange membrane (AEM). Among them, the hydroxide ion conductivity and power density of IL-QCS/PVA/QSiO2-7 membrane can reach up to 78 mS cm-1 at 80 °C and 115 mW cm-2 at 60 °C respectively. In addition, IL-QCS/PVA/QSiO2 membranes have excellent thermal, mechanical, and chemical stabilities, which can meet the application requirements of AEM for fuel cells.

5-Geranyloxy-7-methoxycoumarin inhibits colon cancer (SW480) cells growth by inducing apoptosis.

For the first time, three coumarins were isolated from the hexane extract of limes (Citrus aurantifolia) and purified by flash chromatography. The structures were identified by NMR (1D, 2D) and mass spectral analyses as 5-geranyloxy-7-methoxycoumarin, limettin, and isopimpinellin. These compounds inhibited human colon cancer (SW-480) cell proliferation, with 5-geranyloxy-7-methoxycoumarin showing the highest inhibition activity (67 %) at 25 µM. Suppression of SW480 cell proliferation by 5-geranyloxy-7-methoxycoumarin was associated with induction of apoptosis, as evidenced by annexin V staining and DNA fragmentation. In addition, 5-geranyloxy-7-methoxycoumarin arrested cells at the G0/G1 phase, and induction of apoptosis was demonstrated through the activation of tumour suppressor gene p53, caspase8/3, regulation of Bcl2, and inhibition of p38 MAPK phosphorylation. These findings suggest that 5-geranyloxy-7-methoxycoumarin has potential as a cancer preventive agent.

Investigation of the Relationship between Genetic and Breeding Characteristics of WBPH Behavior according to Resistant Materials in Rice.

Rice accounts for most of the calories consumed by the world's population. However, the whitebacked planthopper (WBPH), Sogatella furcifera (Horvath), is an insect that can cause rice yield loss. WBPH sucks the stems of rice and negatively affects yield and grain quality. Therefore, numerous insecticides have been developed to control WBPH in rice fields. However, chemical pesticides cause serious problems such as environmental pollution and ecosystem disturbance. Here, we research the possibility of using previously reported rice extracts obtained using methanol, Chrysoeriol 7(C7) and Cochlioquinone-9 (cq-9), as potential insect repellents. WBPH was caged with C7 or cq-9 and monitored, and the WBPH behavior was recorded. The number of WBPHs approaching the periphery of the C7 and cq-9 was very low. In cages containing the C7 and cq-9, only 13 and 7 WBPHs out of 100, respectively, walked around the material. In addition, foliar spraying with C7 and cq-9 did not negatively affect the plant height. The expression level of genes related to resistance was maintained at a high level in the resistant lines when treated with WBPHs alone, but was at a similar level to those of the controls when treated with C7 or cq-9. Interfering with WBPH access did not adversely affect the plant phenotype. Recently, people's interest in the environment has increased, and the use of plant-derived materials is also increasing. There is a new trend towards using plant extracts as an environmentally friendly means of managing resistance to WBPH during the rice cultivation period, while also avoiding environmental pollution.

Potential Applications of Thermoresponsive Poly(N-Isoproplacrylamide)-Grafted Nylon Membranes: Effect of Grafting Yield and Architecture on Gating Performance.

This study illustrated the potential applications of thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) grafted nylon membranes with different grafting yields and grafting architecture. The thermoresponsive gating performance at temperatures below and above the lower critical solution temperature (LCST) of PNIPAm (32 °C) were demonstrated. The linear PNIPAm-grafted nylon membrane exhibited a sharp response over the temperature range 20-40 °C. The grafting yield of 25.5% and 21.9%, for linear and crosslinked PNIPAm respectively, exhibited highest thermoresponsive gating function for water flux and had a stable and repeatable "open-closed" switching function over 5 cycle operations. An excellent oil/water separation was obtained at T < 32 °C, at which the hydrophilic behavior was observed. The linear PNIPAm-grafted nylon membrane with 35% grafting yield had the highest separation efficiency of 99.7%, while PNIPAm structures were found to be independent of the separation efficiency. In addition, the membranes with thermoresponsive gas permeability were successfully achieved. The O2 and CO2 transmission rates through the PNIPAm-grafted nylon membranes decreased when the grafting yield increased, showing the better gas barrier property. The permeability ratio of CO2 to O2 transmission rates of both PNIPAm architectures at 25 °C and 35 °C were around 0.85 for low grafting yields, and approximately 1 for high grafting yields. Ultimately, this study demonstrated the possibility of using these thermoresponsive smart membranes in various applications.

Mesoscale Simulation Based on the Dynamic Mean-Field Density Functional Method on Block-Copolymeric Ionomers for Polymer Electrolyte Membranes.

Block copolymers generally have peculiar morphological characteristics, such as strong phase separation. They have been actively applied to polymer electrolyte membranes for proton exchange membrane fuel cells (PEMFCs) to obtain well-defined hydrophilic regions and water channels as a proton pathway. Although molecular simulation tools are advantageous to investigate the mechanism of water channel formation based on the chemical structure and property relationships, classical molecular dynamics simulation has limitations regarding the model size and time scale, and these issues need to be addressed. In this study, we investigated the morphology of sulfonated block copolymers synthesized for PEM applications using a mesoscale simulation based on the dynamic mean-field density functional method, widely applied to investigate macroscopic systems such as polymer blends, micelles, and multi-block/grafting copolymers. Despite the similar solubility parameters of the monomers in our block-copolymer models, very different morphologies in our 3D mesoscale models were obtained. The model with sulfonated monomers, in which the number of sulfonic acid groups is twice that of the other model, showed better phase separation and water channel formation, despite the short length of its hydrophilic block. In conclusion, this unexpected behavior indicates that the role of water molecules is important in making PEM mesoscale models well-equilibrated in the mesoscale simulation, which results in the strong phase separation between hydrophilic and hydrophobic regions and the ensuing well-defined water channel. PEM synthesis supports the conclusion that using the sulfonated monomers with a high sulfonation degree (32.5 mS/cm) will be more effective than using the long hydrophilic block with a low sulfonation degree (25.2 mS/cm).

Amorphous Fluorinated Acrylate Polymer Dielectrics for Flexible Transistors and Logic Gates with High Operational Stability.

Fluorinated amorphous polymeric gate-insulating materials for organic thin-film transistors (OTFTs) not only form hydrophobic surfaces but also significantly reduce traps at the interface between the organic semiconductor and gate insulator. Therefore, these polymeric materials can enhance the OTFT's operation stability. In this study, we synthesized a new polymeric insulating material series composed of acrylate and fluorinated functional groups (with different ratios) named MBHCa-F and used them as gate insulators for OTFTs and in other applications. The insulating features of the MBHCa-F polymers, including surface energy, surface atomic content properties, dielectric constant, and leakage current, were clearly analyzed with respect to the content of the fluorinated functional groups. At higher fluorine-based functional group content, the polymeric series exhibited higher fluorine-based contents at the surface and superior electrical properties, such as field-effect mobility and driving stability, at OTFTs. Therefore, we believe that this study provides a substantial method for synthesizing polymeric insulating materials to enhance the operational stability and electrical performance of OTFTs.

A Review of Recent Chitosan Anion Exchange Membranes for Polymer Electrolyte Membrane Fuel Cells.

Considering the critical energy challenges and the generation of zero-emission anion exchange membrane (AEM) sources, chitosan-based anion exchange membranes have garnered considerable interest in fuel cell applications owing to their various advantages, including their eco-friendly nature, flexibility for structural modification, and improved mechanical, thermal, and chemical stability. The present mini-review highlights the advancements of chitosan-based biodegradable anion exchange membranes for fuel cell applications published between 2015 and 2022. Key points from the rigorous literature evaluation are: grafting with various counterions in addition to crosslinking contributed good conductivity and chemical as well as mechanical stability to the membranes; use of the interpenetrating network as well as layered structures, blending, and modified nanomaterials facilitated a significant reduction in membrane swelling and long-term alkaline stability. The study gives insightful guidance to the industry about replacing Nafion with a low-cost, environmentally friendly membrane source. It is suggested that more attention be given to exploring chitosan-based anion exchange membranes in consideration of effective strategies that focus on durability, as well as optimization of the operational conditions of fuel cells for large-scale applications.

The complete chloroplast genome of Echeveria lilacina Kimnach & Moran 1980 (Saxifragales: Crassulaceae).

Echeveria lilacina Kimnach & Moran 1980 is a succulent plant having ornamental and ecological importance. In this study, the first complete chloroplast genome of Echeveria lilacina, a species belonging to the Crassulaceae family, was characterized from the de novo assembly of Illumina NovaSeq 6000 paired-end sequencing data. The chloroplast genome of E. lilacina is 150,080 bp in length, which includes a large single-copy (LSC) region of 81,741 bp, a small single-copy (SSC) region of 16,747 bp, and a pair of identical inverted repeat regions (IRs) of 25,796 bp each. The genome annotation revealed a total of 138 genes, including 87 protein-coding genes, 41 transfer RNA (tRNA) genes, and 10 ribosomal RNA (rRNA) genes. The phylogenetic analysis with 15 complete chloroplast genome sequences including outgroup showed that E. lilacina formed the closest taxonomical relationship with Graptopetalum amethystinum in the Crassulaceae family.