RESUMEN
Hydrogels of poly(vinyl alcohol) (PVA)/sodium alginate (SA), and magnetic nanoparticles (MNPs) were prepared by solvent casting in the absence and in the presence of magnets, in order to obtain MNPs distributed randomly (PVA/SA-rMNP) and magnetically oriented MNPs (PVA/SA-gMNP) in the polymer matrix. Atomic force microscopy (AFM) and magnetic force microscopy (MFM) techniques were used to evaluate the topography and to map the distribution of magnetic domains in the polymer matrix, respectively. The tip-surface distance (lift distance) of 50 nm during the MFM analyses facilitated the mapping of magnetic domains because the van der Waals forces were minimized. The magnetic signal stemming from clusters of MNPs were more easily identified than that from isolated MNPs. PVA and SA, PVA/SA, PVA/SA-rMNP, and PVA/SA-gMNP coatings with surface roughness (Ra) values of 3.8 nm, 28.7 nm, and 49.8 nm, respectively, were tested for the proliferation of mouse hippocampal HT-22 cells. While PVA/SA, PVA/SA-rMNP, and PVA/SA-gMNP coatings preserved cell viability >70% in comparison to the control (plastic plate) over 48 h, cell proliferation tended to decrease on surfaces with higher Ra values (PVA/SA-gMNP). These findings showed that the orientation of magnetic domains led to an increase of surface roughness, which decreased the viability of HT-22 cells. Thus, these results might be interesting for situations, where the control of cell proliferation is necessary.
Asunto(s)
Óxido Ferrosoférrico , Alcohol Polivinílico , Ratones , Animales , Microscopía de Fuerza Atómica , Alginatos , Fenómenos MagnéticosRESUMEN
Hybrid nanoparticles of poly(methylmethacrylate) synthesized in the presence of poly (diallyldimethyl ammonium) chloride by emulsion polymerization exhibited good colloidal stability, physical properties, and antimicrobial activity but their synthesis yielded poor conversion. Here we create antimicrobial coatings from casting and drying of the nanoparticles dispersions onto model surfaces such as those of silicon wafers, glass coverslips, or polystyrene sheets and optimize conversion using additional stabilizers such as cetyltrimethyl ammonium bromide, dioctadecyldimethyl ammonium bromide, or soybean lecithin during nanoparticles synthesis. Methodology included dynamic light scattering, determination of wettability, ellipsometry of spin-coated films, scanning electron microscopy, and determination of colony forming unities (log CFU/mL) of bacteria after 1 h interaction with the coatings. The additional lipids and surfactants indeed improved nanoparticle synthesis, substantially increasing the conversion rates by stabilizing the monomer droplets in dispersion during the polymerization. The coatings obtained by spin-coating or casting of the nanoparticles dispersions onto silicon wafers were hydrophilic with contact angles increasing with the amount of the cationic polymer in the nanoparticles. Against Escherichia coli and Staphylococcus aureus, bacteria cell counts were reduced by approximately 7 logs upon interaction with the coatings, revealing their potential for several biotechnological and biomedical applications.
Asunto(s)
Antibacterianos/farmacología , Materiales Biocompatibles Revestidos/farmacología , Nanopartículas/química , Polímeros/farmacología , Coloides , Escherichia coli/efectos de los fármacos , Pruebas de Sensibilidad Microbiana , Nanopartículas/ultraestructura , Polietilenos/farmacología , Polimetil Metacrilato/farmacología , Compuestos de Amonio Cuaternario/farmacología , Solventes , Staphylococcus aureus/efectos de los fármacos , Tensoactivos/farmacologíaRESUMEN
BACKGROUND: Several cationic polymers exhibit a useful antimicrobial property, however the structure-activity relationship still requires a more complete investigation. The main objective of this work is the comparison between the antimicrobial activity and toxicity of free and immobilized poly (diallyldimethylammonium) chloride (PDDA) in biocompatible poly (methylmethacrylate) (PMMA) nanoparticles (NPs). RESULTS: NPs synthesis by emulsion polymerization is performed over a range of [PDDA] at two methylmethacrylate (MMA) concentrations. The PMMA/PDDA dispersions are characterized by dynamic light-scattering for sizing, polydispersity and zeta-potential analysis, scanning electron microscopy (SEM), plating plus colony forming unities (CFU) counting for determination of the minimal microbicidal concentrations (MMC) against Escherichia coli, Staphylococcus aureus and Candida albicans and hemolysis evaluation against mammalian erythrocytes. There is a high colloidal stability for the cationic PMMA/PDDA NPs over a range of [PDDA]. NPs diverse antimicrobial activity against the microorganisms reduces cell viability by eight-logs (E. coli), seven-logs (S. aureus) or two-logs (C. albicans). The NPs completely kill E. coli over a range of [PDDA] that are innocuous to the erythrocytes. Free PDDA antimicrobial activity is higher than the one observed for PDDA in the NPs. There is no PDDA induced-hemolysis at the MMC in contrast to the hemolytic effect of immobilized PDDA in the NPs. Hemolysis is higher than 15 % for immobilized PDDA at the MMC for S. aureus and C. albicans. CONCLUSIONS: The mobility of the cationic antimicrobial polymer PDDA determines its access to the inner layers of the cell wall and the cell membrane, the major sites of PDDA antimicrobial action. PDDA freedom does matter for determining the antimicrobial activity at low PDDA concentrations and absence of hemolysis.
Asunto(s)
Compuestos Alílicos/administración & dosificación , Compuestos Alílicos/farmacología , Antiinfecciosos/administración & dosificación , Antiinfecciosos/farmacología , Portadores de Fármacos/química , Nanopartículas/química , Polimetil Metacrilato/química , Compuestos de Amonio Cuaternario/administración & dosificación , Compuestos de Amonio Cuaternario/farmacología , Compuestos Alílicos/química , Antiinfecciosos/química , Candida albicans/efectos de los fármacos , Candidiasis/tratamiento farmacológico , Escherichia coli/efectos de los fármacos , Infecciones por Escherichia coli/tratamiento farmacológico , Humanos , Pruebas de Sensibilidad Microbiana , Nanopartículas/ultraestructura , Compuestos de Amonio Cuaternario/química , Infecciones Estafilocócicas/tratamiento farmacológico , Staphylococcus aureus/efectos de los fármacosRESUMEN
Hydroxypropyl methylcellulose (HPMC) belongs to the cellulose ether family that has hydroxyl groups substituted by hydrophobic methyl groups (DS) and hydrophilic hydroxypropyl groups (MS). Herein, the interactions between water molecules and cryogels prepared with HPMC in the presence and absence of a linear nonionic surfactant, as well as CaO2 microparticles, which react with water producing O2, were systematically investigated by sorption experiments and Time-Domain Nuclear Magnetic Resonance. Regardless of the DS and MS, most water molecules presented transverse relaxation time t2 typical of intermediate water and a small population of more tightly bound water. HPMC cryogels with the highest DS of 1.9 presented the slowest swelling rate of 0.519 ± 0.053 gwater/(g.s) and the highest contact angle values 85.250o ± 0.004o, providing the best conditions for a slow reaction between CaO2 and water. The presence of surfactant favored hydrophobic interactions that allowed the polar head of the surfactant to be exposed to the medium, resulting in a higher swelling rate and lower contact angle values. The HPMC with the highest MS presented the fastest swelling rate and the lowest contact angle. These findings are relevant for the formulations and reactions, where tuning the swelling kinetics is crucial for the final application.
Asunto(s)
Criogeles , Agua , Agua/química , Derivados de la Hipromelosa/química , Humectabilidad , Estructura Molecular , Metilcelulosa/química , TensoactivosRESUMEN
A feature in neurodegenerative disorders is the loss of neurons, caused by several factors including oxidative stress induced by reactive oxygen species (ROS). In this work, static magnetic field (SMF) was applied in vitro to evaluate its effect on the viability, proliferation, and migration of human neuroblastoma SH-SY5Y cells, and on the toxicity induced by hydrogen peroxide (H2O2), tert-butyl hydroperoxide (tBHP), H2O2/sodium azide (NaN3) and photosensitized oxidations by photodynamic therapy (PDT) photosensitizers. The SMF increased almost twofold the cell expression of the proliferation biomarker Ki-67 compared to control cells after 7 days of exposure. Exposure to SMF accelerated the wound healing of scratched cell monolayers and significantly reduced the H2O2-induced and the tBHP-induced cell deaths. Interestingly, SMF was able to revert the effects of NaN3 (a catalase inhibitor), suggesting an increased activity of catalase under the influence of the magnetic field. In agreement with this hypothesis, SMF significantly reduced the oxidation of DCF-H2, indicating a lower level of intracellular ROS. When the redox imbalance was triggered through photosensitized oxidation, no protection was observed. This observation aligns with the proposed role of catalase in cellular proctetion under SMF. Exposition to SMF should be further validated in vitro and in vivo as a potential therapeutic approach for neurodegenerative disorders.
Asunto(s)
Neuroblastoma , Enfermedades Neurodegenerativas , Humanos , Especies Reactivas de Oxígeno/metabolismo , Peróxidos/farmacología , Peróxido de Hidrógeno/toxicidad , Línea Celular Tumoral , Catalasa/metabolismo , Neuroblastoma/metabolismo , Estrés Oxidativo , Campos MagnéticosRESUMEN
Adsorbents made of hydroxypropyl methylcellulose (HPMC) and sugarcane bagasse (BG) microparticles were applied for the separation of 17α-ethinylestradiol (EE2) from aqueous solution in batch, and from aqueous solution and freshwater in fixed-bed columns. HPMC chains and BG microparticles were crosslinked by the esterification with citric acid. The adsorbents presented compression modulus values that increased from 208 ± 20 kPa (pure HPMC) to 917 ± 90 kPa, when the content of BG particles added to HPMC was 50 wt% (HPMC50BG). The porosity (~ 97%), specific surface area (1.16 ± 0.10 m2/g) and swelling degree (20 ± 1 g water/g) values were not affected by the addition of BG particles. The adsorption isotherms determined for EE2 on HPMC and on HPMC50BG fitted to the Langmuir and Freundlich models; the adsorption capacity of HPMC was slightly higher than that of composite HPMC50BG. Nevertheless, the addition of BG particles rendered outstanding mechanical reinforcement and dimensional stability to the adsorbents. The adsorption was driven by (i) hydrophobic interactions between EE2 methylene and aromatic groups and HPMC methyl groups, as evidenced by FTIR spectroscopy, and (ii) H bonds between HPMC and EE2 hydroxyl groups, as revealed by the adsorption enthalpy change (ΔHads) of - 45 kJ/mol. Column adsorption experiments of EE2 from aqueous solution on HPMC and HPMC50BG indicated adsorptive capacity (q0) values of 8.06 mg/g and 4.07 mg/g, respectively. These values decreased considerably for the adsorption of EE2 from river water, probably due to the competition of EE2 with humic substances dissolved in natural water. The HPMC adsorbents could be recycled retaining up to 83% of the original efficiency.
Asunto(s)
Saccharum , Contaminantes Químicos del Agua , Adsorción , Celulosa , Ácido Cítrico , Etinilestradiol/química , Agua Dulce , Sustancias Húmicas , Concentración de Iones de Hidrógeno , Derivados de la Hipromelosa , Indicadores y Reactivos , Cinética , Agua/químicaRESUMEN
The simultaneous removal of organic and inorganic pollutants from water requires multifunctional adsorbents. Cryogels of carboxymethyl cellulose (CMC) and sugarcane bagasse (BG) were modified with cetyltrimethylammonium bromide (CTAB) micelles for the adsorption of methylene blue (MB), Cr(VI) ions and bisphenol A (BPA) separately, in binary or ternary aqueous mixtures. Batch adsorption studies of MB and Cr(VI) and BPA on the CMCBG-CTAB adsorbents indicated removal capacities of 100%, 70% and 95%, respectively. MB adsorbed as multilayers on the CMCBG walls by electrostatic interaction, whereas Cr(VI) and BPA adsorbed on the cationic CTAB micelles surface and hydrophobic core of CTAB micelles, respectively. The breakthrough curves obtained for pure adsorbates and their mixtures showed that the adsorption of Cr(VI) ions increased (i) ~ 3.5 times in binary mixture with BPA or in the ternary mixture, in comparison to pure Cr(VI) solution, and (ii) 1.4 times in binary mixture with MB molecules, due to synergistic effects. In the presence of Cr(VI) ions in binary or ternary mixtures, the adsorption of MB was dramatically reduced due to screening effects. The adsorption of BPA was not significantly affected by the presence of MB or Cr(VI). The adsorbents were recycled five times without significant efficiency loss.
Asunto(s)
Azul de Metileno , Contaminantes Químicos del Agua , Adsorción , Compuestos de Bencidrilo , Carboximetilcelulosa de Sodio , Celulosa , Cetrimonio , Cromo/análisis , Criogeles , Concentración de Iones de Hidrógeno , Cinética , Fenoles , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
Polysaccharides and proteins are important macromolecules for developing hydrogels devoted to biomedical applications. Chemical hydrogels offer chemical, mechanical, and dimensional stability than physical hydrogels due to the chemical bonds among the chains mediated by crosslinkers. There are many crosslinkers to synthesize polysaccharides and proteins based on hydrogels. In this review, we revisited the crosslinking reaction mechanisms between synthetic or natural crosslinkers and polysaccharides or proteins. The selected synthetic crosslinkers were glutaraldehyde, carbodiimide, boric acid, sodium trimetaphosphate, N,N'-methylene bisacrylamide, and polycarboxylic acid, whereas the selected natural crosslinkers included transglutaminase, tyrosinase, horseradish peroxidase, laccase, sortase A, genipin, vanillin, tannic acid, and phytic acid. No less important are the reactions involving click chemistry and the macromolecular crosslinkers for polysaccharides and proteins. Literature examples of polysaccharides or proteins crosslinked by the different strategies were presented along with the corresponding highlights. The general mechanism involved in chemical crosslinking mediated by gamma and UV radiation was discussed, with particular attention to materials commonly used in digital light processing. The evaluation of crosslinking efficiency by gravimetric measurements, rheology, and spectroscopic techniques was presented. Finally, we presented the challenges and opportunities to create safe chemical hydrogels for biomedical applications.
Asunto(s)
Hidrogeles , Polisacáridos , Química Clic , Reactivos de Enlaces Cruzados/química , Glutaral , Peroxidasa de Rábano Silvestre , Hidrogeles/química , Polisacáridos/químicaRESUMEN
Protein/peptide-based hydrogel biomaterial inks with the ability to incorporate various cells and mimic the extracellular matrix's function are promising candidates for 3D printing and biomaterials engineering. This is because proteins contain multiple functional groups as reactive sites for enzymatic, chemical modification or physical gelation or cross-linking, which is essential for the filament formation and printing processes in general. The primary mechanism in the protein gelation process is the unfolding of its native structure and its aggregation into a gel network. This network is then stabilized through both noncovalent and covalent cross-link. Diverse proteins and polypeptides can be obtained from humans, animals, or plants or can be synthetically engineered. In this review, we describe the major proteins that have been used for 3D printing, highlight their physicochemical properties in relation to 3D printing and their various tissue engineering application are discussed.
RESUMEN
PURPOSE: To design and analyze the biologic properties (antibacterial and antifungal, as well as cytotoxicity) of a dental biomaterial based on incorporation of the biocide poly(diallyldimethylammonium chloride) (PDADMAC) into the masses of self- and thermopolymerizable acrylic resins. MATERIALS AND METHODS: PDADMAC was diluted into tetrahydrofuran (4 wt%) and incorporated into self- and thermopolymerizable acrylic resins. PDADMAC inclusion was verified by measuring the contact angle with water droplets. Plain resins were used as controls. The antibacterial activity was evaluated against Staphylococcus aureus (ATCC 6538P) and Escherichia coli (ATCC 8739), and the antifungal activity was tested against Candida albicans (ATCC 10231) and Aspergillus niger (ATCC 16404). The cytotoxicity of substances leached from these materials was analyzed in human dental pulp stem cells using MTT reduction assay. RESULTS: Reduction of contact angle confirmed the incorporation of PDADMAC in the resins. Both resins containing PDADMAC were more effective against Gram-positive and Gram-negative bacteria than their controls. The modified resins were also significantly more effective against Candida albicans than controls, but no resin was effective against Aspergillus niger. The cell viability of cultures submitted to substances leached from the PDADMAC resins was similar to that of cells cultured under ideal conditions. CONCLUSION: The incorporation of PDADMAC into the acrylic resins achieved the desired antibacterial effect, with no changes in the biocompatibility properties of the resins. Moreover, the modified resins were effective against Candida albicans, the most common fungus in the oral cavity. Thus, the incorporation of PDADMAC in biomaterials seems to be promising in dentistry.
Asunto(s)
Resinas Acrílicas , Antibacterianos , Bacterias Gramnegativas , Bacterias Grampositivas , Humanos , Polietilenos , Compuestos de Amonio CuaternarioRESUMEN
Magnetic responsive hydrogels composed of alginate (Alg) and xanthan gum (XG), crosslinked with Ca2+ ions, were modified by in situ magnetic nanoparticles (MNP) formation. In comparison to magnetic Alg hydrogels, magnetic Alg-XG hydrogels presented superior mechanical and swelling properties, due to the high charge density and molecular weight of XG. The loading efficiency of levodopa (LD), an important antiparkinson drug, in the Alg-XG/MNP hydrogels was the highest (64%), followed by Alg/MNP (56%), Alg-XG (53%) and Alg (28%). A static external magnetic field (EMF) of 0.4â¯T stimulated the release of LD from Alg-XG/MNP hydrogels achieving 64⯱â¯6% of the initial loading after 30â¯h. The viability, proliferation and expression of dopaminergic markers of human neuroblastoma SH-SY5Y cell on the LD loaded magnetic hydrogels were successful, particularly under EMF, which stimulated the release of LD. Overall, the results of this study provided the rational design of magnetic hydrogels for the delivery of drugs, which combined with external magnetic stimulus, might improve cell proliferation and specific differentiation.
Asunto(s)
Hidrogeles/química , Levodopa/química , Campos Magnéticos , Magnetismo , Alginatos/química , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Dopaminérgicos/administración & dosificación , Dopaminérgicos/química , Dopaminérgicos/farmacocinética , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Humanos , Concentración de Iones de Hidrógeno , Levodopa/administración & dosificación , Levodopa/farmacocinética , Microscopía Electrónica de Rastreo , Polisacáridos Bacterianos/químicaRESUMEN
Sodium alginate (Alg) reacted with antibiotic gentamicin sulfate (GS) in an aqueous-phase condition mediated by carbodiimide chemistry, in the molar ratios Alg: GS of (1:0.5), (1:1) and (1:2). The Alg-GS conjugated derivatives were characterized by elemental analysis for nitrogen content, Fourier transform infrared spectroscopy in the attenuated total reflection mode (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), thermogravimetric analyses (TGA) and water sorption measurements. XPS and FTIR-ATR analyses clearly indicated that GS molecules covalently attached to the backbone of the alginate chains by amide bond formation. The highest amount of GS bound to Alg (43.5⯱â¯0.4â¯wt%) and the highest swelling ratio (4962⯱â¯661%) were observed for the Alg-GS (1:2) sample. Bioluminescence assays with Pseudomonas aeruginosa PAO1/lecA:lux and colony forming counting of Staphylococcus aureus and Escherichia coli upon contact with all Alg-GS conjugates revealed microbicidal activity; however, Alg-GS (1:2) was the most efficient, due to the highest GS content.
Asunto(s)
Alginatos/química , Antiinfecciosos/química , Gentamicinas/química , Hidrogeles/química , Carbodiimidas/química , Quitosano/química , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Pseudomonas aeruginosa/efectos de los fármacos , Espectroscopía Infrarroja por Transformada de Fourier , Staphylococcus aureus/efectos de los fármacos , TermogravimetríaRESUMEN
The adsorption behavior of horseradish peroxidase (HRP) onto hybrid particles of poly(methylmethacrylate) (PMMA) and carboxymethylcellulose (CMC) was investigated by means of spectrophotometry. Dispersions of PMMA/CMC particles were characterized by light scattering, zeta potential measurements and scanning electron microscopy before and after HRP adsorption. HRP adsorbed irreversibly onto PMMA/CMC particles; the adsorption isotherm showed an initial step and an adsorption plateau. The enzymatic activity of free HRP and immobilized HRP (plateau region) was monitored by means of spectrophotometry as a function of storing time. Upon adsorbing HRP there is little (up to 20%) or no reduction of enzymatic activity in comparison to that observed for free HRP in solution. After storing free HRP and HRP-covered PMMA/CMC particles for 18 days the level of enzymatic activity is kept. HRP-covered PMMA/CMC particles dispersions, which were dried and re-dispersed, retained 50% of their catalytic properties. These interesting findings were discussed in the light of a beneficial effect of a hydrated microenvironment for maintenance of enzyme conformation and activity.
Asunto(s)
Carboximetilcelulosa de Sodio/química , Peroxidasa de Rábano Silvestre/metabolismo , Peroxidasa de Rábano Silvestre/farmacocinética , Polimetil Metacrilato/química , Polisacáridos/química , Adsorción , Catálisis , Enzimas Inmovilizadas/química , Luz , Microscopía Electrónica de Rastreo , Oxidación-Reducción , Dispersión de Radiación , Espectrofotometría Ultravioleta , Factores de TiempoRESUMEN
Hydroxypropyl methylcellulose (HPMC) and xyloglucan (XG) crosslinked with citric acid over a range of HPMC/XG weight ratios formed sustainable blend films characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, tensile tests, circular dichroism and determination of inhibitory activity against Staphylococcus aureus and Escherichia coli. Both in solution and in the crosslinked films, HPMC chains lost the original ordered conformation upon interacting with XG, giving rise to an entropic gain. The highest values of tensile strength (25MPa) and Young's modulus (689MPa) occurred for the 50:50 HPMC/XG blend films. In vitro loading of gentamicin sulfate (GS) in the films amounted to 0.18±0.05 -0.37±0.05g of GS per g polymer. At pH 7.4 and 37°C, the GS release kinetics from the films fitted with the Korsmeyer-Peppas model revealed a non-Fickian release mechanism with diffusional coefficient nâ¼0.7. The cross-linked films of HPMC, XG and their blends loaded with GS showed outstanding antibacterial activity against Staphylococcus aureus and Escherichia coli, disclosing their potential for novel biomedical applications.
Asunto(s)
Antiinfecciosos/farmacología , Gentamicinas/farmacología , Glucanos/farmacología , Derivados de la Hipromelosa/farmacología , Xilanos/farmacología , Escherichia coli/efectos de los fármacos , Metilcelulosa , Staphylococcus aureus/efectos de los fármacosRESUMEN
Hybrid beads composed of magnetite nanoparticles (MNP) and alginate (Alg) were synthesized and coded as Alg-MNP. They were incubated in dopamine (DOPA) solution (5 g/L), at pH 7.4 and 8 °C, during 12 h, promoting the DOPA loaded magnetic beads, coded as Alg-MNP/DOPA. The release of DOPA was further evaluated in the absence and the presence of external magnetic field (EMF) of 0.4 T. The products Alg-MNP and Alg-MNP/DOPA were characterized by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared vibrational spectroscopy (FTIR), UV spectrophotometry, thermogravimetric analyses (TGA), inductively coupled plasma atomic emission spectroscopy (ICP-AES) analyses and superconducting quantum interference device (SQUID) magnetometer. The magnetic and chemical properties of Alg-MNP beads were not affected by DOPA loading. The incorporation of DOPA into the beads depended on the pH and on the negative charge density. At pH 7.4 38% of DOPA were loaded into Alg-MNP beads, whereas at pH 2 or using neat Alg beads (lower charge density than Alg-MNP) the loading efficiency decreased to one third or less. In the absence of EMF, 24% of the loaded DOPA was released from Alg-MNP at pH 7.4 over a period of 26 h. The released amount increased to 33% under the stimulus of EMF. A model was proposed to explain the loading efficiency of charged drugs, as DOPA, into hybrid beads and the role played by EMF on delivery systems, where drug and matrix are oppositely charged. The results suggest that the alginate combined with magnetite nanoparticles is a promising system for release of DOPA in the presence of EMF.
Asunto(s)
Alginatos/química , Dopamina/química , Óxido Ferrosoférrico/química , Nanopartículas de Magnetita/química , Microesferas , Algoritmos , Dopamina/farmacocinética , Dopaminérgicos/química , Dopaminérgicos/farmacocinética , Liberación de Fármacos , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Concentración de Iones de Hidrógeno , Cinética , Campos Magnéticos , Nanopartículas de Magnetita/ultraestructura , Microscopía Electrónica de Rastreo , Estructura Molecular , Espectrometría por Rayos X , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Polypyrrole (PPy) was electropolymerized in xanthan hydrogels (XCA), resulting in electroactive XCAPPy scaffolds with (15 ± 3) wt.% PPy and (40 ± 10) µm thick. The physicochemical characterization of hybrid XCAPPy scaffolds was performed by means of cyclic voltammetry, swelling tests, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), scanning electron microscopy (SEM), atomic force microscopy (AFM) and tensile tests. XCAPPy swelled~80% less than XCA. FTIR spectra and thermal analyses did not evidence strong interaction between PPy and XCA matrix. XCAPPy presented a porous stratified structure resulting from the arrangement of PPy chains parallel to XCA surface. Under stress XCAPPy presented larger strain than neat XCA probably due to the sliding of planar PPy chains. The adhesion and proliferation of fibroblasts onto XCA and XCAPPy were evaluated in the absence and in the presence of external magnetic field (EMF) of 0.4T, after one day, 7 days, 14 days and 21 days. Fibroblast proliferation was more pronounced onto XCAPPy than onto XCA, due to its higher hydrophobicity and surface roughness. EMF stimulated cell proliferation onto both scaffolds.
Asunto(s)
Polímeros/química , Polisacáridos Bacterianos/química , Pirroles/química , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Células Cultivadas , Fibroblastos/citología , Humanos , Campos MagnéticosRESUMEN
In this article the molecular conformation of xanthan chains in hydrogel films was investigated by means of circular dichroism, showing substantial differences between xanthan hydrogel prepared in the absence (XNT) and in the presence of citric acid (XCA). The xanthan chains in XNT hydrogels films presented ordered conformation (helixes), while in XCA they were in the disordered conformation (coils), exposing a larger number of carboxylate groups than XNT. The large charge density in XCA hydrogels was evidenced by their behavior under variable ionic strength. Studies about the application of XNT and XCA for loading and delivering of bovine serum albumin (BSA) and lysozyme (LYZ) showed that both events are controlled by hydrogels and proteins net charge, which can be triggered by pH. The preservation of LYZ native conformation after hydrogel loading explained the substantial bactericidal activity of LYZ loaded hydrogels and enables their use as active wound dressings.
Asunto(s)
Antibacterianos/química , Portadores de Fármacos/química , Hidrogeles/química , Conformación Molecular , Muramidasa/química , Polisacáridos Bacterianos/química , Albúmina Sérica Bovina/química , Animales , Antibacterianos/farmacología , Vendajes/microbiología , Bovinos , Ácido Cítrico/química , Portadores de Fármacos/farmacologíaRESUMEN
In this work xanthan-nanohydroxyapatite (XnHAp) and its equivalent strontium substituted (XnHApSr) were synthesized by the precipitation of nanohydroxyapatite in xanthan aqueous solution, characterized and compared to conventional hydroxyapatite particles (HAp). XnHAp and XnHApSr were less crystalline than HAp, as revealed by X-ray diffraction. Xanthan chains enriched the surface of XnHAp and XnHApSr particles, increasing the zeta potential values from -(7±1)mV, determined for HAp, to -(17±3)mV and -(25±3)mV, respectively. This effect led to high colloidal stability of XnHAp and XnHApSr dispersions and acicular particles (140±10)nm long and (8±2)nm wide, as determined by scanning electron microscopy and atomic force microscopy. XnHAp and XnHApSr particles were added to xanthan hydrogels to produce compatible nanocomposites (XCA/XnHAp and XCA/XnHApSr). Dried nanocomposites presented surface energy, Young's modulus and stress at break values comparable to those determined for bare xanthan matrix. Moreover, adding XnHAp or XnHApSr nanoparticles to xanthan hydrogel did not influence its porous morphology, gel content and swelling ratio. XCA/XnHAp and XCA/XnHApSr composites proved to be suitable for osteoblast growth and particularly XCA/XnHapSr composites induced higher alkaline phosphatase activity.
Asunto(s)
Durapatita/química , Nanocompuestos/química , Polisacáridos Bacterianos/química , Animales , Línea Celular , Proliferación Celular/efectos de los fármacos , Módulo de Elasticidad , Hidrogeles/química , Hidrogeles/metabolismo , Hidrogeles/toxicidad , Ratones , Nanocompuestos/toxicidad , Osteoblastos/citología , Porosidad , Estrés MecánicoRESUMEN
Objective: To evaluate the inclusion capacity and bactericidal efficiency of diallyl dimethyl ammonium chloride (PDADMAC) diluted in tetrahydrofuran (THF) upon inclusion in the medical grade silicone polymer structure. Material and Methods: It was diluted the PDADMAC in THF at the concentration of 4wt%. It was included in the silicon paste during its vulcanization process. The contact angle measurements were performed to evaluate whether the biocide inclusion into the silicon paste was successful. All samples were sterilized with gamma radiation at 25KGy-dosage prior to the microbiological tests. Microbiological testing strictly followed the Antibacterial products - Test for antibacterial activity and efficacy JIS Z 2801: 201010 and the used of specific bacteria, as Staphylococcus aureus ATCC 6538P and Escherichia coli ATCC 8739. Results: The results showed that PDADMAC, when dissolved in THF at 4wt%, displayed good incorporation in medical silicone and a broad-spectrum antibacterial response. The results of the tests using Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P showed that the silicone with no biocide addition did not present antibacterial activity. In contrast, the experimental group plus 2 mL of PDADMAC would have an ideal antibacterial response. Conclusion: Medical grade silicone can be used as a material with antibacterial properties, since it has been able to keep PDADMAC compound attached to its structure, thus acquiring antimicrobial property.
Asunto(s)
Elastómeros de Silicona/análisis , Técnicas In Vitro/métodos , Prótesis Maxilofacial , Antibacterianos/análisis , Elastómeros de Silicona , Brasil , Materiales Dentales , Metilenotetrahidrofolato Reductasa (NADPH2)RESUMEN
In this work xanthan chains were crosslinked by esterification reaction at 165 °C either in the absence or in the presence of citric acid. Higher crosslinking density was obtained using citric acid, as evidenced by its lower swelling degree. Tensiometry, a very precise and sensitive technique, was applied to study swelling rates and diffusion mechanisms of water, which was initially quasi-Fickian, controlled by wicking properties, changing to Fickian or Anomalous, depending on hydrogel composition. Hydrogels swelling degree increased at high pH values, due to electrostatic repulsion and ester linkages rupture. Equilibrium swelling degree was affected by salts, depending on gel composition and kind of salt. Effects could be explained by interaction between ions and polymeric chains, EPA/EPD ability of water or osmotic gradient.