A Bibliometric Analysis (2010-2020) of the Dental Scientific Literature on Chemo-Mechanical Methods of Caries Removal Using Carisolv and BRIX3000.

Reports in the literature have proposed and analyzed several minimally invasive techniques for caries removal in recent decades. In light of recent events surrounding the ongoing epidemiological context, concerns have been raised regarding the generation of aerosols during dental procedures. The aim of our research was to provide an overview of the scientific literature on the topic of chemo-mechanical caries removal (CMCR) methods, focusing on two products (Carisolv, BRIX3000), commercially available in Europe. A bibliometric analysis was used to investigate the scientific articles included in Web of Science (WoS) Core Collection database, published from January 2010 to December 2020. We analyzed the co-occurrence of all keywords (Author Keywords and the KeyWords Plus section), co-authorship and co-citation, using the free software VOSviewer. Our bibliometric analysis revealed a worldwide interest in the subject of chemo-mechanical methods of caries removal, which has transcended the area of pediatric dentistry. The analyzed studies have been conducted mainly in high-income countries that have developed sanitary policies regarding prevention and early treatment of carious lesions as a health priority.

[Objective evaluation of orthodontic treatment need with Dental Aesthetic Index]. / Fogazati rendellenességek kezelési szükségletének tárgyilagos felmérése a Dental Aesthetic Index segítségével.

INTRODUCTION AND AIM: To evaluate the frequency and severity of the malocclusions and treatment need in a group of adult patients in Târgu-Mureș, dividing them up according to age and gender. METHOD: Sixty-four, randomly selected patients were divided up according to age and gender. Ten occlusal traits related to dentofacial anomalies according to missing teeth, spacing, crowding and occlusion were used to evaluate the malocclusions on each of their study cast. The Dental Aesthetic Index (DAI) regression equation was used to obtain the DAI score that defines severity. RESULTS: The average DAI score was 38 with a range of 18-79, showing that the majority of patients needed mandatory orthodontic treatment. No statistically significant difference was found between gender, age groups and need for treatment. CONCLUSION: More than two-fifths of the examined patients have a mandatory need for orthodontic treatment if the DAI scores are the main screening tool. Orv Hetil. 2018; 159(9): 352-356.

Personalized and Complex Esthetic Oral Rehabilitation in a Case of Non-Syndromic Oligodontia.

Dental agenesis is one of the most common developmental anomalies in humans and it is frequently associated with several other oral abnormalities. The present case describes non-familial agenesis of permanent teeth in a twenty-one-year-old boy with no apparent systemic abnormalities. The treatment included a personalized and interdisciplinary approach involving endodontics, orthodontics, implant-supported restorations and prosthetic treatments. The treatment plan was thoroughly elaborated using photographic analysis, study models, orthopantomogram, CBCT and cephalograms. Virtual smile design, diagnostic waxing and mock-ups previsualized the treatment objectives. The edentulous spaces were reconstructed by inserting dental implants and monolithic zirconia implant-supported restorations. The final results showed a highly esthetic and functional rehabilitation. Periodic check-ups have shown that the stability of the result is well maintained and that the implant-supported restorations are an optimal solution for patients with multiple anodontia.

Three-Dimensional Assessment of Upper Airway Volume and Morphology in Patients with Different Sagittal Skeletal Patterns.

BACKGROUND: The relationship between respiratory function and craniofacial morphology has garnered significant attention due to its implications for upper airway and stomatognathic development. Nasal breathing plays a key role in craniofacial growth and dental positioning. This study investigated upper airway morphology and volume differences among individuals with class I, II, and III skeletal anomalies. METHODS: Ninety orthodontic patients' CBCT scans were analyzed to assess the oropharynx and hypopharynx volumes. Skeletal diagnosis was established based on the cephalometric analysis. RESULTS: A significant volume change in the oropharynx and pharynx was demonstrated when comparing class II with class III anomalies (p = 0.0414, p = 0.0313). The total volume of the pharynx was increased in class III anomalies. The area of the narrowest part of the pharynx (MIN-CSA) significantly decreased in classes I and II compared to class III (p = 0.0289, p = 0.0003). Patients with Angle class III anomalies exhibited higher values in the narrowest pharyngeal segment. Gender differences were significant in pharyngeal volumes and morphologies across malocclusion classes. CONCLUSIONS: The narrowest segment of the pharynx had the highest values in patients with Angle class III. The volume of the oropharynx was found to be greater in patients with Angle class III versus patients with Angle class II.

Comparative Evaluation of Dental Enamel Microhardness Following Various Methods of Interproximal Reduction: A Vickers Hardness Tester Investigation.

Interproximal enamel reduction, also known as stripping, is a common orthodontic procedure that reduces the mesiodistal diameter of teeth, allowing for a balance of available space in dental arches. The aim of this study was to assess the enamel surface microhardness resulting from the application of currently available methods for interproximal reduction. Forty-two extracted human permanent teeth were divided into six different groups, each subjected to a therapeutic stripping procedure using various methods (i.e., diamond burs, abrasive strips of 90 µm, 60 µm, 40 µm, and 15 µm, and abrasive discs). Stripping was performed by a single individual in accordance with the manufacturers' recommendations for the various systems used. One of the proximal faces of the tooth underwent IPR, while the other side remained untreated for control. The hardness of the enamel surface was measured using a Vickers hardness tester. The control group achieved the hardest enamel surface (354.4 ± 41.02 HV1), while the lowest was observed for enamel surfaces treated with 90 µm abrasive strips (213.7 ± 118.6). The only statistically significant difference was identified in comparisons between the values measured for the control group and those obtained after stripping with diamond burs (p = 0.0159). Enamel microhardness varied depending on the stripping instrument used, but no statistically significant differences were found (p > 0.05). Optimal microhardness values, close to those of healthy enamel, were achieved after mechanical treatment with 15 µm abrasive strips and abrasive discs. Dental stripping is a safe therapeutic procedure that has a relatively minor influence on the microhardness of surface enamel.

Effects of Disinfection and Steam Sterilization on the Mechanical Properties of 3D SLA- and DLP-Printed Surgical Guides for Orthodontic Implant Placement.

Three-dimensional printed surgical guides increase the precision of orthodontic mini-implant placement. The purpose of this research was to investigate the effects of disinfection and of two types of autoclave sterilization on the mechanical properties of 3D printed surgical guides obtained via the SLA (stereolithography) and DLP (digital light processing) printing methods. A total of 96 standard specimens (48 SLA and 48 DLP) were printed to analyze the tensile and flexural properties of the materials. A total of 80 surgical guide (40 SLA and 40 DLP) specimens from each printing method were classified into four groups: CG (control group); G1, disinfected with 4% Gigasept (Gigasept Instru AF; Schülke & Mayer Gmbh, Norderstedt, Germany); G2, autoclave-sterilized (121 °C); and G3, autoclave-sterilized (134 °C). Significant differences in the maximum compressive load were determined between the groups comprising the DLP-(p < 0.001) and the SLA- (p < 0.001) printed surgical guides. Groups G2 (p = 0.001) and G3 (p = 0.029) showed significant parameter modifications compared with the CG. Disinfection with 4% Gigasept (Gigasept Instru AF; Schülke & Mayer Gmbh, Norderstedt, Germany) is suitable both for SLA- and DLP-printed surgical guides. Heat sterilization at both 121 °C and 134 °C modified the mechanical properties of the surgical guides.

[Study of skeletal features in congenital hypodontia]. / Veleszületett csírahiánnyal társuló skeletalis eltérések vizsgálata.

INTRODUCTION: The incidence of congenital hypodontia is increasing in daily practice. Early diagnosis of this dental disorder and the associated skeletal malocclusions is crucial for successful and stable final rehabilitation. AIM: Comparison of cephalometric findings of patients with hypodontia of 1-4 teeth with the measurement results of the control group without teeth agenesis. MATERIAL AND METHOD: We evaluated the lateral X-ray of 41 patients with 1-4 teeth agenesis selected from patients referred for orthodontic treatment to the Orthodontic Department of the University of Medicine and Pharmacy from Târgu Mures within a two-year period. The results were compared with the values of the age and sex matched control group. RESULTS: Bilateral upper incisor and lower bicuspid were missing in most of the hypodontia cases. When looking at the NSGn angle predicting the growth direction of the mandible, statistically significant differences were found between the male (p = 0.012), the front (p = 0.010) and the hypodontia group (p = 0.024) and the control group. Regarding the ANB angle, which shows the sagittal position of the maxilla to the mandible, statistically significant differences were found between the subgroups (women, men, anterior or posterior hypodontia) and the control group. CONCLUSION: Larger number of skeletal class 3 and vertical hypodivergent tendency were observed in the hypodontia group. Orv Hetil. 2019; 160(6): 214-219.

Evaluation of the mechanical properties and surface topography of as-received, immersed and as-retrieved orthodontic archwires.

BACKGROUND AND AIMS: This experimental study mainly aims at comparing the most important mechanical properties of the new orthodontic archwires, those immersed in fluorinated solution, the as-retrieved ones and the intra-oral used ones. METHODS: A total of 270 arch wires were tested, using tensile testing and three-point bending tests. The tested archwires were made of Stainless Steel, Nickel Titanium, Beta-Titanium and physiognomic covered Nickel Titanium. The tested archwires were subjected to three types of treatments: immersion into fluorinated solution, immersion into carbonated drinks and intra-oral use. RESULTS: The immersion caused variations of the activation and deactivation forces of all arch wires. The most affected arch wires, in terms of bending characteristics, were the intra-oral used ones. CONCLUSIONS: The alteration of mechanical properties of the orthodontic arch wires by their immersion into fluorinated solutions and soft drinks could not be statistically demonstrated.

Correlation Among Chronological Age, Dental Age and Cervical Vertebrae Maturity in Romanian Subjects.

Aim: The purpose of this study was to assess the correlation among the chronological age, the dental age and the skeletal maturity in adolescents and young adults. Materials and Methods: The material consisted of panoramic and lateral cephalometric radiographs of 221 subjects, 146 girls (mean age 13.79 ±2.90) and 75 boys (mean age 13.46 ±2.82), inhabitants of Mures County (Central Romania). The chronological age was defined as the time from birth to the day the radiographs were taken. The dental age was evaluated according to Demirjian's method for third molars mineralization stage. Skeletal maturity was evaluated on cephalometric radiographs using the cervical vertebrae maturation (CVM) method. Descriptive statistical and linear regression analysis was performed and a coefficient of correlation was calculated. Results: The mean values obtained for cervical stages for boys and girls were significant (p=0.0171). The third molar mineralization seems to be highly correlated with the gender's chronological age for the whole group and for both genders as well (p<0.0001). The medium age of the cervical maturation showed to be younger in girls than in boys in CS1, CS3, CS5 and CS6 stages. In CS4 stages female subjects are in advance with almost 12 months, these subjects start (CS1) and end (CS6) the cervical maturation at a younger age. Conclusions: The results indicate that significant correlation exist between the chronological age and the dental age when crown development ends and between the chronological age and CVM (CS1 and CS6 stages for girls and CS2 and CS5 stages for boys).

Craniofacial morphology in patients with Angle Class II division 2 malocclusion.

Cephalometric analysis is frequently used in orthodontics for diagnostic purposes, in order to evaluate the positional relationship of the upper and lower jaw to the cranial base, as well as to objectively asses the way dental arches relate to one another and to the skeletal base. As with other dento-skeletal anomalies, the normal growth process can induce changes in these parameters. The purpose of this study is to evaluate the skeletal and dental changes that occur in growing patients with Angle Class II division 2 malocclusion. The study also focuses on analyzing and comparing several parameters in three groups of young patients of different ages, diagnosed with Class II division 2 malocclusion, in order to determine whether the anomaly worsens or improves during the patients' growth period. A total of 25 lateral skull teleradiographs were analyzed using cephX. The patients were divided into three groups (Group 1: 6-8 years, Group 2: 9-14 years, Group 3: 15-18 years). We used the cephalometric parameters described in Björk-Jarabak and Tweed analyses, as well as the relationship of the upper and lower central incisors to the skeletal landmarks. The statistical methods used in this study were the analysis of variance (ANOVA) and the unpaired Student's t-test (p<0.05). We concluded that, during the physiological growth process, the Angle Class II division 2 malocclusion has the following cephalometric characteristics: the maxillary central incisors were in accentuated retroclination, the interincisal angle was very obtuse, the gonial angle showed lower than normal values towards the end of the growth period, the lower anterior face height was definitely decreased, the mandibular body length was shorter than normal in the early growth period and the tendency towards a hypodivergent skeletal pattern remained stable during growth.

Adjusting dento-alveolar morphology with orthodontic mini-implants (miniscrews). A clinical case report.

Mini-implants are increasingly popular for creating skeletal anchorage in clinical orthodontics. The aim of this article is to present and discuss the clinical uses, benefits and drawbacks of the miniscrew implants used to reorder and adjust the dento-alveolar morphology of the overerupted maxillary molars. The loss of the lower premolars and molars very often leads to overeruption of the opposing maxillary teeth, combined with insufficient space for prosthetic restorations. The available treatment options are either a significant reduction of the maxillary teeth, often associated with endodontic treatment, or a complex orthodontic treatment. In the previous years, different cases of orthodontic intrusion with mini-implants were described. In this report, the authors describe a case of a young patient who needed a maxillary molar intrusion in order to get sufficient prosthetic space for an implant supported fixed restoration in the third quadrant. This treatment type preserved maximum tooth structures and allowed a successful mandibular restoration.