X-ray focusing below 3 nm with aberration-corrected multilayer Laue lenses.

Multilayer Laue lenses are volume diffractive optical elements for hard X-rays with the potential to focus beams to sizes as small as 1 nm. This ability is limited by the precision of the manufacturing process, whereby systematic errors that arise during fabrication contribute to wavefront aberrations even after calibration of the deposition process based on wavefront metrology. Such aberrations can be compensated by using a phase plate. However, current high numerical aperture lenses for nanometer resolution exhibit errors that exceed those that can be corrected by a single phase plate. To address this, we accumulate a large wavefront correction by propagation through a linear array of 3D-printed phase correcting elements. With such a compound refractive corrector, we report on a point spread function with a full-width at half maximum area of 2.9 × 2.8 nm2 at a photon energy of 17.5 keV.

Imaging via Correlation of X-Ray Fluorescence Photons.

We demonstrate that x-ray fluorescence emission, which cannot maintain a stationary interference pattern, can be used to obtain images of structures by recording photon-photon correlations in the manner of the stellar intensity interferometry of Hanbury Brown and Twiss. This is achieved utilizing femtosecond-duration pulses of a hard x-ray free-electron laser to generate the emission in exposures comparable to the coherence time of the fluorescence. Iterative phasing of the photon correlation map generated a model-free real-space image of the structure of the emitters. Since fluorescence can dominate coherent scattering, this may enable imaging uncrystallised macromolecules.

Robust ptychographic X-ray speckle tracking with multilayer Laue lenses.

In recent years, X-ray speckle tracking techniques have emerged as viable tools for wavefront metrology and sample imaging applications, and have been actively developed for use at synchrotron light sources. Speckle techniques can recover an image free of aberrations and can be used to measure wavefronts with a high angular sensitivity. Since they are compatible with low-coherence sources they can be also used with laboratory X-ray sources. A new implementation of the ptychographic X-ray speckle tracking method, suitable for the metrology of highly divergent wavefields, such as those created by multilayer Laue lenses, is presented here. This new program incorporates machine learning techniques such as Huber and non-parametric regression and enables robust and quick wavefield measurements and data evaluation even for low brilliance X-ray beams, and the imaging of low-contrast samples. To realize this, a software suite was written in Python 3, with a C back-end capable of concurrent calculations for high performance. It is accessible as a Python module and is available as source code under Version 3 or later of the GNU General Public License.

Analysis of X-ray multilayer Laue lenses made by masked deposition.

Multilayer Laue lenses are diffractive optics for hard X-rays. To achieve high numerical aperture and resolution, diffracting structures of nanometer periods are required in such lenses, and a thickness (in the direction of propagation) of several micrometers is needed for high diffracting efficiency. Such structures must be oriented to satisfy Bragg's law, which can only be achieved consistently over the entire lens if the layers vary in their tilt relative to the incident beam. The correct tilt, for a particular wavelength, can be achieved with a very simple technique of using a straight-edge mask to give the necessary gradient of the layers. An analysis of the properties of lenses cut from such a shaded profile is presented and it is shown how to design, prepare, and characterize matched pairs of lenses that operate at a particular wavelength and focal length. It is also shown how to manufacture lenses with ideal curved layers for optimal efficiency.

Multilayer Laue lenses at high X-ray energies: performance and applications.

X-ray microscopy at photon energies above 15 keV is very attractive for the investigation of atomic and nanoscale properties of technologically relevant structural and bio materials. This method is limited by the quality of X-ray optics. Multilayer Laue lenses (MLLs) have the potential to make a major impact in this field because, as compared to other X-ray optics, they become more efficient and effective with increasing photon energy. In this work, MLLs were utilized with hard X-rays at photon energies up to 34.5 keV. The design, fabrication, and performance of these lenses are presented, and their application in several imaging configurations is described. In particular, two "full field" modes of imaging were explored, which provide various contrast modalities that are useful for materials characterisation. These include point projection imaging (or Gabor holography) for phase contrast imaging and direct imaging with both bright-field and dark-field illumination. With high-efficiency MLLs, such modes offer rapid data collection as compared with scanning methods as well as a large field of views.

Extended asymmetric-cut multilayer X-ray gratings.

The fabrication and characterization of a large-area high-dispersion blazed grating for soft X-rays based on an asymmetric-cut multilayer structure is reported. An asymmetric-cut multilayer structure acts as a perfect blazed grating of high efficiency that exhibits a single diffracted order, as described by dynamical diffraction throughout the depth of the layered structure. The maximum number of grating periods created by cutting a multilayer deposited on a flat substrate is equal to the number of layers deposited, which limits the size of the grating. The size limitation was overcome by depositing the multilayer onto a substrate which itself is a coarse blazed grating and then polish it flat to reveal the uniformly spaced layers of the multilayer. The number of deposited layers required is such that the multilayer thickness exceeds the step height of the substrate structure. The method is demonstrated by fabricating a 27,060 line pairs per mm blazed grating (36.95 nm period) that is repeated every 3,200 periods by the 120-µm period substrate structure. This preparation technique also relaxes the requirements on stress control and interface roughness of the multilayer film. The dispersion and efficiency of the grating is demonstrated for soft X-rays of 13.2 nm wavelength.

Thermal stability studies of short period Sc/Cr and Sc/B4C/Cr multilayers.

The stability of short period Sc/Cr and Sc/B4C/Cr multilayers was investigated over a large temperature range. The aim was to find a stable reflective coating for an off-axis parabola for focusing x rays from a soft x-ray free-electron laser. Normal incidence reflectivity, surface roughness, and intrinsic stress were investigated as a function of annealing temperature and two samples were also studied with a high-resolution transmission electron microscope (TEM), a scanning TEM, and through electron energy loss spectroscopy (EELS). Interface-engineered Sc/B4C/Cr multilayers showed increased thermal stability and higher reflectivity as compared to pure Sc/Cr multilayers.

Two-dimensional disorder for broadband, omnidirectional and polarization-insensitive absorption.

The surface of thin-film solar cells can be tailored with photonic nanostructures to allow light trapping in the absorbing medium. This in turn increases the optical thickness of the film and thus enhances their absorption. Such a coherent light trapping is generally accomplished with deterministic photonic architectures. Here, we experimentally explore the use of a different nanostructure, a disordered one, for this purpose. We show that the disorder-induced modes in the film allow improvements in the absorption over a broad range of frequencies and impinging angles.

Dose-efficient scanning Compton X-ray microscopy.

The highest resolution of images of soft matter and biological materials is ultimately limited by modification of the structure, induced by the necessarily high energy of short-wavelength radiation. Imaging the inelastically scattered X-rays at a photon energy of 60 keV (0.02 nm wavelength) offers greater signal per energy transferred to the sample than coherent-scattering techniques such as phase-contrast microscopy and projection holography. We present images of dried, unstained, and unfixed biological objects obtained by scanning Compton X-ray microscopy, at a resolution of about 70 nm. This microscope was realised using novel wedged multilayer Laue lenses that were fabricated to sub-ångström precision, a new wavefront measurement scheme for hard X rays, and efficient pixel-array detectors. The doses required to form these images were as little as 0.02% of the tolerable dose and 0.05% of that needed for phase-contrast imaging at similar resolution using 17 keV photon energy. The images obtained provide a quantitative map of the projected mass density in the sample, as confirmed by imaging a silicon wedge. Based on these results, we find that it should be possible to obtain radiation damage-free images of biological samples at a resolution below 10 nm.

Precise wavefront characterization of x-ray optical elements using a laboratory source.

Improvements in x-ray optics critically depend on the measurement of their optical performance. The knowledge of wavefront aberrations, for example, can be used to improve the fabrication of optical elements or to design phase correctors to compensate for these errors. At present, the characterization of such optics is made using intense x-ray sources, such as synchrotrons. However, the limited access to these facilities can substantially slow down the development process. Improvements in the brightness of lab-based x-ray micro-sources in combination with the development of new metrology methods, particularly ptychographic x-ray speckle tracking, enable characterization of x-ray optics in the lab with a precision and sensitivity not possible before. Here, we present a laboratory setup that utilizes a commercially available x-ray source and can be used to characterize different types of x-ray optics. The setup is used in our laboratory on a routine basis to characterize multilayer Laue lenses of high numerical aperture and other optical elements. This typically includes measurements of the wavefront distortions, optimum operating photon energy, and focal length of the lens. To check the sensitivity and accuracy of this laboratory setup, we compared the results to those obtained at the synchrotron and saw no significant difference. To illustrate the feedback of measurements on performance, we demonstrated the correction of the phase errors of a particular multilayer Laue lens using a 3D printed compound refractive phase plate.

Corrosion of Ni in 1-butyl-1-methyl-pyrrolidinium bis (trifluoromethylsulfonyl) amide room-temperature ionic liquid: an in situ X-ray imaging and spectromicroscopy study.

This paper reports a pioneering application of soft X-ray scanning transmission microscopy (STXM), combined with micro-spot X-ray absorption spectroscopy (XAS) and X-ray fluorescence spectroscopy (XRF), for the investigation of the corrosion of metal electrodes in contact with room-temperature ionic liquids (RTIL). Using an open electrochemical cell in vacuo we explore some fundamental aspects of the aggressiveness of the 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)amide ([BMP][TFSA]) RTIL towards Ni under in situ electrochemical polarisation. The possibility of imaging electrochemically-induced morphological features in conjunction with micro-XAS and XRF spectroscopies has provided unprecedented details regarding the space distribution and chemical state of corrosion products.

Fabrication and testing of l = 2 optical vortex phase masks for coronography.

In this paper we present the fabrication process and tests of two different types of l = 2 spiral phase plates (SPPs), designed for an Optical Vortex Coronagraph (OVC) in the visible wavelength regime. Each phase mask is realized dividing the spirals area in sectors respectively of 8 and 512 of levels using lithographic nanofabrication approach. The SPPs produces different optical vortices (OVs) with topological charge l that depends on the number of steps and on the wavelength. We found that the residual light in the central dark region of the OV tends to zero as the number of steps increases.

Ptychographic X-ray speckle tracking with multi-layer Laue lens systems.

The ever-increasing brightness of synchrotron radiation sources demands improved X-ray optics to utilize their capability for imaging and probing biological cells, nano-devices and functional matter on the nanometre scale with chemical sensitivity. Hard X-rays are ideal for high-resolution imaging and spectroscopic applications owing to their short wavelength, high penetrating power and chemical sensitivity. The penetrating power that makes X-rays useful for imaging also makes focusing them technologically challenging. Recent developments in layer deposition techniques have enabled the fabrication of a series of highly focusing X-ray lenses, known as wedged multi-layer Laue lenses. Improvements to the lens design and fabrication technique demand an accurate, robust, in situ and at-wavelength characterization method. To this end, a modified form of the speckle tracking wavefront metrology method has been developed. The ptychographic X-ray speckle tracking method is capable of operating with highly divergent wavefields. A useful by-product of this method is that it also provides high-resolution and aberration-free projection images of extended specimens. Three separate experiments using this method are reported, where the ray path angles have been resolved to within 4 nrad with an imaging resolution of 45 nm (full period). This method does not require a high degree of coherence, making it suitable for laboratory-based X-ray sources. Likewise, it is robust to errors in the registered sample positions, making it suitable for X-ray free-electron laser facilities, where beam-pointing fluctuations can be problematic for wavefront metrology.

X-ray focusing with efficient high-NA multilayer Laue lenses.

Multilayer Laue lenses are volume diffraction elements for the efficient focusing of X-rays. With a new manufacturing technique that we introduced, it is possible to fabricate lenses of sufficiently high numerical aperture (NA) to achieve focal spot sizes below 10 nm. The alternating layers of the materials that form the lens must span a broad range of thicknesses on the nanometer scale to achieve the necessary range of X-ray deflection angles required to achieve a high NA. This poses a challenge to both the accuracy of the deposition process and the control of the materials properties, which often vary with layer thickness. We introduced a new pair of materials-tungsten carbide and silicon carbide-to prepare layered structures with smooth and sharp interfaces and with no material phase transitions that hampered the manufacture of previous lenses. Using a pair of multilayer Laue lenses (MLLs) fabricated from this system, we achieved a two-dimensional focus of 8.4 × 6.8 nm2 at a photon energy of 16.3 keV with high diffraction efficiency and demonstrated scanning-based imaging of samples with a resolution well below 10 nm. The high NA also allowed projection holographic imaging with strong phase contrast over a large range of magnifications. An error analysis indicates the possibility of achieving 1 nm focusing.

Experimental setup for lensless imaging via soft x-ray resonant scattering.

We have developed a setup for measuring holographically formed interference patterns using an integrated sample-mask design. The direct space image of the sample is obtained via a two-dimensional Fourier transform of the X-ray diffraction pattern. We present the details of our setup, commenting on the influence of geometrical parameters on the imaging capabilities. As an example, we present and discuss the results of test experiments on a patterned Co film.

High numerical aperture multilayer Laue lenses.

The ever-increasing brightness of synchrotron radiation sources demands improved X-ray optics to utilise their capability for imaging and probing biological cells, nanodevices, and functional matter on the nanometer scale with chemical sensitivity. Here we demonstrate focusing a hard X-ray beam to an 8 nm focus using a volume zone plate (also referred to as a wedged multilayer Laue lens). This lens was constructed using a new deposition technique that enabled the independent control of the angle and thickness of diffracting layers to microradian and nanometer precision, respectively. This ensured that the Bragg condition is satisfied at each point along the lens, leading to a high numerical aperture that is limited only by its extent. We developed a phase-shifting interferometric method based on ptychography to characterise the lens focus. The precision of the fabrication and characterisation demonstrated here provides the path to efficient X-ray optics for imaging at 1 nm resolution.

In†situ X-ray spectromicroscopy investigation of the material stability of SOFC metal interconnects in operating electrochemical cells.

The present in situ study of electrochemically induced processes occurring in Cr/Ni bilayers in contact with a YSZ electrolyte aims at a molecular-level understanding of the fundamental aspects related to the durability of metallic interconnects in solid oxide fuel cells (SOFCs). The results demonstrate the potential of scanning photoelectron microspectroscopy and imaging to follow in situ the evolution of the chemical states and lateral distributions of the constituent elements (Ni, Cr, Zr, and Y) as a function of applied cathodic potential in a cell working at 650 °C in 10(-6) mbar O(2) ambient conditions. The most interesting findings are the temperature-induced and potential-dependent diffusion of Ni and Cr, and the oxidation-reduction processes resulting in specific morphology-composition changes in the Ni, Cr, and YSZ areas.

Metallic plate corrosion and uptake of corrosion products by nafion in polymer electrolyte membrane fuel cells.

Nafion contamination by ferrous-alloy corrosion products, resulting in dramatic drops of the Ohmic potential, is a suspected major failure mode of polymer electrolyte membrane fuel cells that make use of metallic bipolar plates. This study demonstrates the potential of scanning transmission X-ray microscopy combined with X-ray absorption and fluorescence microspectroscopy for exploring corrosion processes of Ni and Fe electrodes in contact with a hydrated Nafion film in a thin-layer cell. The imaged morphology changes of the Ni and Fe electrodes and surrounding Nafion film that result from relevant electrochemical processes are correlated to the spatial distribution, local concentration, and chemical state of Fe and Ni species. The X-ray fluorescence maps and absorption spectra, sampled at different locations, show diffusion of corrosion products within the Nafion film only in the case of the Fe electrodes, whereas the Ni electrodes appear corrosion resistant.

Covalent assembly and micropatterning of functionalized multiwalled carbon nanotubes to monolayer-modified Si(111) surfaces.

Multiwalled carbon nanotubes (MWNTs) covalently bound to monocrystalline p-type Si(111) surfaces have been prepared by attaching soluble amine-functionalized MWNTs onto a preassembled undecanoic acid monolayer using carbodiimide coupling. SEM analysis of these functionalized surfaces shows that the bound MWNTs are parallel to the surface rather than perpendicular. The voltammetric and electrochemical impedance spectroscopy measurements reveal that the electron transfer at the MWNT-modified surface is faster than that observed at a MWNT-free alkyl monolayer. We have also demonstrated that it is possible to prepare MWNT micropatterns using this surface amidation reaction and a "reagentless" UV photolithography technique. Following this approach, MWNT patterns surrounded by n-dodecyl areas have been produced and the local electrochemical properties of these micropatterned surfaces have been examined by scanning electrochemical microscopy. In particular, it is demonstrated that the MWNT patterns allow a faster charge transfer which is consistent with the results obtained for the uniformly modified surfaces.