Peri-implant bone loss clinical and radiographic evaluation around rough neck and microthread implants: a 5-year study.

OBJECTIVE: To evaluate marginal bone loss over 5 years around microthreaded implants placed in the maxillary anterior/esthetic zone and immediate restored with non-occlusal loading. MATERIALS AND METHODS: Seventy-one implants (with microthreads up to the platform-rough surface body and neck, internal connection and platform switching) were placed in healed bone in the maxillary arches of 30 men and 23 women (mean age 37.85 ± 7.09 years, range 27-60). All subjects had at least 3 mm of soft tissue to allow the establishment of adequate biologic width and to reduce bone resorption. Each patient received a provisional restoration immediately after implant placement with slight occlusal contact. Mesial and distal bone height was evaluated using digital radiography on the day following implant placement (baseline) and after 1, 2, 3, 4 and 5 years. Primary stability was measured with resonance frequency analysis. RESULTS: No implants failed, resulting in a cumulative survival rate of 100% after 3 years. Marginal bone loss from implant collar to bone crest measured at baseline (peri-implant bone defect at the fresh extraction socket) and after 5 years was 0.90 mm ± 0.26 mm. Mesial and distal site crestal bone loss ranged from 3.42 ± 1.2 mm at baseline to 3.51 ± 1.5 mm after 5 years and from 3.38 ± 0.9 mm at baseline to 3.49 ± 0.9 mm after 5 years, respectively (P = 0.086). CONCLUSIONS: The results of this study showed limited implant crestal bone loss 0.90 mm ± 0.26 mm and 100% of implant survival rate at 5-year follow-up of immediate restored implants with rough surface neck and microthreads.

The influence of drill length and irrigation system on heat production during osteotomy preparation for dental implants: an ex vivo study.

OBJECTIVE: This study aimed to measure the influence of drill length and irrigation system on heat production during osteotomy preparation for dental implants using bovine bone rib as experimental model. MATERIALS AND METHODS: Three groups were created: Group 1: drilling with three consecutive burs with double irrigation (internal and external) for a 4.0 mm conical implant; and Group 2 and Group 3: drilling with three consecutive burs with external irrigation for a 4.1 mm cylindrical implant and for a 4.3 mm conical implant, respectively. Four lengths were tested: 10, 12, 14 and 16 mm; in site prepared on bovine ribs using a surgical unit linked to a testing device, to standardize and simulate implant drilling procedures. Bone temperature variations were recorded using three thermocouples in different positions as of the crestal bone: 2 mm, position (p1); 7 mm, position 2 (p2); and 12 mm, position 3 (p3). RESULTS: The highest temperature changes were invariably recorded during the process of withdrawal. Significantly lower temperature changes (P < 0.02) could be recorded at maximum drilling depths during the shearing process regardless of drilling depth or irrigation method. Double irrigation was associated with significantly lower temperatures compared with external irrigation by the use of implant drills (P < 0.01). CONCLUSIONS: Within the limitations of this ex vivo study was possible concluded that the use a double irrigation system in multiple conventional drill for osteotomy can decrease the heat generation when increase the drill length.

Histological and histomorphometric analyses of narrow implants, crestal and subcrestally placed in severe alveolar atrophy: a study in foxhound dogs.

BACKGROUND: Narrow-diameter implants provide an alternative to the horizontal augmentation techniques situations severe bone atrophy. Lack of bone width and interdental space has been regarded as an encumbrance in the case selection for prosthetic rehabilitation using dental implants. OBJECTIVE: The aim of the study was to evaluate bone-to-implant contact and marginal bone loss of two different narrow implants in resorbed ridges at different crestal positions. MATERIAL AND METHODS: 48 Bredent Narrow(®) implants (24 MiniSky(®) and NarowSky(®) ) were placed at crestal and subcrestal levels in healing bone of atrophic alveolar ridge of 6 American foxhounds. Histological and histomorphometric analyses of osseointegration were carried out at 4 and 8 weeks. RESULTS: Modeling in the marginal defect region was accompanied by marked decreases in the dimensions of both the buccal and the more lingual bone walls. Relative to BIC, significant differences were found in favor of subcrestal group, for both Narrow Sky and MiniSky. Linear measurements showed to be slightly high in the crestal group. With significant differences for PM-IS (peri-implant mucosa to implant shoulder) and IS-BC (implant shoulder to buccal bone crest). CONCLUSIONS: Within the limitations of animal study, it can be stated that the NarrowSky(test group) crestal and subcrestal implants showed less crestal bone resorption, higher ISQ values and most BIC at 4 and 8 weeks of evaluation compared with MiniSky implants (control group). The design of the implants plays an important role in peri-implant mucosa and crestal bone maintenance at 8-week follow-up period.

Retracted: In vivo behavior of hydroxyapatite/ß­TCP /collagen scaffold in animal model. Histological, histomorphometrical, radiological, and SEM analysis at 15, 30, and 60 days

Retraction: Maté Sánchez de Val JE , Calvo Guirado JL , Ramírez Fernández MP , Delgado Ruiz RA , Mazón P, De Aza PN . In vivo behavior of hydroxyapatite/ß­TCP /collagen scaffold in animal model. Histological, histomorphometrical, radiological, and SEM analysis at 15, 30, and 60 days. Clin Oral Impl Res . The above article, published online on August 7, 2015, in Wiley Online Library (wileyonlinelibrary.com) has been retracted by agreement between the journal editor­in­chief, L Heitz­Mayfield, and John Wiley & Sons Ltd. The retraction has been agreed due to image discrepancies resulting in unreliable data. It has not been possible to prove the validity of the images. Images in Figure 4 have been used in other publications representing different time points and materials. Images within Figure 4 have been manipulated to represent different time points and materials. Reference Maté Sánchez de Val JE , Calvo Guirado JL , Ramírez Fernández MP , Delgado Ruiz RA , Mazón P, De Aza PN . In vivo behavior of hydroxyapatite/ß­TCP /collagen scaffold in animal model. Histological, histomorphometrical, radiological, and SEM analysis at 15, 30, and 60 days. Clin Oral Impl Res . https://doi.org/10.1111/clr.12656

Evaluation of the efficacy of a topical sialogogue spray containing malic acid 1% in elderly people with xerostomia: a double-blind, randomized clinical trial.

OBJECTIVE: The aim of this study was to evaluate the clinical efficacy of a topical sialogogue spray containing 1% malic acid for elderly people affected by xerostomia. MATERIAL AND METHODS: This research took the form of a double-blind, randomized clinical trial. Forty-one individuals (mean age: 78.7 years) with xerostomia were divided into two groups: for the first 'intervention group' (21 subjects) a topical sialogogue spray (1% malic acid) was applied, while for the second 'control group' (20 subjects), a placebo spray was applied; for both groups, the sprays were applied on demand during 2 weeks. The Xerostomia Inventory (XI) was used to evaluate xerostomia levels before and after product/placebo application. Unstimulated and stimulated salivary flows rates, before and after spray application, were measured. RESULTS: XI scores decreased significantly (clinically meaningful) from 36.4 ± 7.3 points to 29.1 ± 7.1 (p < 0.05) with an XI difference of 7.2 ± 6.1, after the combination among 1% malic acid with xylitol and fluoride application. After 2 weeks of 1% malic acid application, unstimulated and stimulated salivary flows rates increased significantly (p < 0.05). CONCLUSION: A topical sialogogue spray containing 1% malic acid improved xerostomia in an elderly population and increased unstimulated and stimulated salivary flows rates.

Ultrastructural study by backscattered electron imaging and elemental microanalysis of biomaterial-to-bone interface and mineral degradation of bovine xenografts in maxillary sinus floor elevation.

OBJECTIVES: The aim of this study was to perform an ultrastructural study of the bone-to-biomaterial interface and biomaterial mineral degradation in retrieved bone biopsies following maxillary sinus augmentation using bovine xenografts (Endobon(®)) in 15 clinical cases. MATERIALS AND METHODS: Nine months after sinus lifting, bone cores were harvested from the maxillary sinus. The specimens were processed for observation under a scanning electron microscope with backscattered electron imaging (SEM-BSE). In addition, chemical analysis and elemental mapping of the mineral composition were generated using a microanalytical system based on energy-dispersive X-ray spectrometry (EDX). RESULTS: No clinical complications occurred during surgery. Scanning electron microscopy revealed that newly formed bone was closely attached to the xenograft. Elemental analysis showed a significantly high Ca/P ratio in the residual biomaterials (3.031 ± 0.104) compared with the interface (2.908 ± 0.115) and new bone (2.889 ± 0.113), which suggests that there may be a gradual diffusion of Ca ions from the biomaterial into the newly forming bone at the interface as part of the biomaterial's resorption process. EDX analysis of the residual bovine biomaterial showed particle categories with different mean Ca/P ratios according to size, pointing to different stages of the resorption process. CONCLUSIONS: The biomaterial proved to be biocompatible and osteoconductive when used as a bone substitute for maxillary sinus elevation. The grafting material used is not a completely resorbable material over the time period covered by this study.

Ultrastructural study by backscattered electron imaging and elemental microanalysis of bone-to-biomaterial interface and mineral degradation of porcine xenografts used in maxillary sinus floor elevation.

OBJECTIVES: The aim of this study was to carry out an ultrastructural study of the biomaterial-to-bone interface and biomaterial mineral degradation in retrieved bone biopsies following maxillary sinus augmentation using collagenized porcine xenografts (Osteobiol(®) Mp3) in 15 clinical cases. MATERIALS AND METHODS: Nine months after sinus lifting, bone cores were harvested from the maxillary sinus. The specimens were processed for observation under a scanning electron microscope with backscattered electron imaging (SEM-BSE). In addition, chemical analysis and elemental mapping of the mineral composition were generated using a microanalytical system based on energy-dispersive X-ray spectrometry (EDX). RESULTS: No clinical complications were evident during surgery. Scanning electron microscopy revealed that newly formed bone had become closely attached to the xenograft. Statistical analysis showed a significantly high Ca/P ratio in the biomaterial (2.46 ± 0.16) and at the bone interface (2.00 ± 0.48) compared to bone (1.97 ± 0.36), which suggests that there may be a gradual diffusion of Ca ions from the biomaterial into the newly forming bone at the interface as part of the biomaterial's resorption process. EDX analysis of the residual porcine biomaterial at different points showed some particle categories with different mean ratios of Ca/P according to size, pointing to different stages of the resorption process. CONCLUSIONS: The biomaterial proved to be biocompatible, bioreabsorbable and osteoconductive when used as a bone substitute for maxillary sinus elevation. SEM-BSE revealed that newly formed bone had become closely attached to the xenografts. EDX analysis monitored the resorption process of the porcine bone xenograft. Elemental mapping showed that there was a gradual diffusion of Ca ions from the biomaterial to the newly forming bone at the interface.

Melatonin promotes angiogenesis during repair of bone defects: a radiological and histomorphometric study in rabbit tibiae.

OBJECTIVES: The pineal gland hormone, melatonin, is an immunomodulator and neuroendocrine hormone; it also stimulates monocyte, cytokine and fibroblast proliferations, which influence angiogenesis. The aim of this study was to investigate the effects of melatonin on angiogenesis during bone defect repair by means of radiological and histomorphometric evaluations of bone response to melatonin implants. MATERIALS AND METHODS: Twenty New Zealand rabbits weighing 3,900-4,500 g were used. Twenty melatonin implants were inserted in the proximal metaphyseal area of the animals' right tibia and 20 control areas were located in the left proximal metaphyseal area. Following implantation, the animals were sacrificed in groups of five, after 1, 2, 3 and 4 weeks, respectively. Anteroposterior and lateral radiographs were taken, and radiographic thermal imaging analysis was performed for all groups at different time stages following implant insertion. Samples were sectioned at 5 µm and stained using Hematoxylin-Eosin and Masson's trichrome, supplementing radiographic findings with histomorphometric analysis. RESULTS: After 4 weeks, radiological images showed complete repair of the bone defects. No healed or residual bone alterations attributable to the presence of the melatonin implant were observed. Histomorphometric analysis at 4 weeks showed the presence of a higher density newly formed bone. There were statistically significant differences in the length of cortical formation between the melatonin group and the control group during the first weeks of the study; there were also statistically significant differences in the number of vessels observed in the melatonin groups at the first two study stages. CONCLUSION AND CLINICAL RELEVANCE: Melatonin may have potential beneficial effects on bone defect repair.

Color Assessment of Feldspathic Ceramic with Two Different Thicknesses, Using Multiple Polymeric Cements.

The purpose of this study was to evaluate the color changes of feldspathic ceramics CEREC Blocs (Dentsply Sirona, Milford, DE, USA) when cemented with different luting agents, while varying the ceramic thickness. Seventy ceramic discs of feldspathic ceramic (A2 shade) were obtained with 0.5 and 0.8 mm thicknesses. Seventy composite discs (A3 shade) 1 mm in thickness were used as substrates. After being polished and conditioned, the ceramic and composite discs were cemented with different resin cements and a flowable composite: Variolink® Esthetic Light, Neutral and Warm (Ivoclar Vivadent, Schaan, Liechtenstein); RelyXTM Veneer B0.5, Translucent and A3 Opaque/yellow shades (3M Oral Care, St. Paul, MN, USA); G-aenial® Universal Flow A2 (GC Europe, Leuven, Belgium). Color difference (ΔE) was determined using a spectrophotometer. A two-way ANOVA and multiple comparisons were performed using the Bonferroni method with a 95% confidence interval. Variolink® Neutral showed the highest ΔE (15.12 ± 0.71) and RelyXTM Veneer A3 the lowest value (1.59 ± 0.33). There are no statistically significant differences between the two ceramic thicknesses for Variolink® Light (p = 0.230) and RelyXTM Veneer B0.5 (p = 0.318) cements. The feldspathic ceramic final color is influenced by the cement used and the ceramic thickness. The use of different cements in a thin ceramic has a clinically significant impact on the final esthetic result.

Peri-implant bone reactions to immediate implants placed at different levels in relation to crestal bone. Part II: a pilot study in dogs.

PURPOSE: The aim of the present study was to evaluate bone-to-implant contact (BIC) and bone remodeling dynamics after immediate implant placement at different levels in relation to the crestal bone with two different implant designs in beagle dogs. MATERIALS AND METHODS: The mandibular second, third and fourth premolars of six beagle dogs were extracted bilaterally and three implants were immediately placed in the hemi-arches of each dog. Randomly, three cylindrical and three tapered implants were inserted crestally (control group) or 2 mm subcrestally (test group). Both groups were treated with a minimal mucoperiosteal flap elevation approach. A gap from the buccal cortical wall to the implant was always left. Three dogs were allowed a 4-week submerged healing period and the other three an 8-week submerged healing period. The animals were sacrificed and samples were obtained. Biopsies were processed for ground sectioning. Histomorphometric analysis was carried out in order to compare BIC, de novo bone formation and bone remodeling. RESULTS: All implants osseointegrated clinically and histologically. Healing patterns examined microscopically at 4 and 8 weeks for both groups (crestal and subcrestal) yielded similar qualitative bone findings. The total BIC mean value for the crestal group was 36.48 ± 3.4% and for the subcrestal group was 41.46 ± 4.2%. The mean percentage of newly formed BIC was greater with the cylindrical implant design (46.06 ± 1.09%) than with the tapered design (33.89 ± 1.72%). There was less bone resorption in the subcrestal group (test) than crestal group (control). CONCLUSION: These findings suggest that apical positioning of the top of the implant does not jeopardize bone crest and peri-implant tissue remodeling. However, less resorption of the lingual crest may be expected when implants are placed 2 mm subcrestally. Moreover, higher BIC values were found in cylindrical implants placed subcrestally.

Effects of growth hormone on initial bone formation around dental implants: a dog study.

OBJECTIVE: The aim of this study was to evaluate the effects of topical application of growth hormone (GH) on the osteointegration of dental implants in dogs at 5 and 8 weeks after surgery. MATERIALS AND METHODS: Mandibular premolars and molars were extracted from 12 Beagle dogs. Four screw implants were placed in each mandible. Before implant placement, 4 IU of GH were applied to the test sites (TS); no treatment was applied to control sites (CS). Morphometric parameters, bone-to-implant contact (BIC), peri-implant connective tissue, interthread bone and newly formed bone were measured. The Student's t-test for was used for statistical analysis of data obtained. RESULTS: After 5 weeks of treatment, BIC values varied slightly between 34.33 ± 2.35% (CS) and 35.76 ± 2.96% (TS). Interthread bone tissue was 64.08 ± 8.68 at CS and 72.86 ± 2.93 at TS, with statistical significance (P<0.05). Bone neoformation was 72.53 ± 4.54 at the CS and 80.74 ± 1.65 for the GH group, these being statistically significant differences (P<0.05). After 8 weeks, BIC had slightly increased for the GH group (36.47 ± 3.09 vs. 39.61 ± 2.34). Interthread bone was 80.57 ± 2.28 at the CS and 82.58 ± 2.44 at the GH site, which was statistically significant. Bone neoformation was 88.09 ± 1.38 at CS and 91.01 ± 1.52 at TS, showing statistical significance (P<0.05). CONCLUSION: Topical application of 4 IU of GH like a biomimetic agent at the moment of implant placement has no significant effects on the BIC at 5 and 8 weeks, although bone neoformation and inter-thread bone values did increase significantly.

Calculation of bone graft volume using 3D reconstruction system.

OBJECTIVES: To obtain bone bioreplicas for determining precisely the amount of biomaterial required for bone regeneration procedure. STUDY DESIGN: A case-control comparison with a total sample size of 20 cases, 10 control and 10 test samples. Bioreplicas were generated from helical CAT scans with 0.5 mm slices, without 3D reconstruction or image filters. Bone defects in premolar and molar areas were treated with titanium mesh and xenograft (MP3) combined with resorbable carriers. Time taken to carry out procedures with and without the use of bioreplicas (in minutes), discrepancies between the grafts performed with and without bioreplicas and bone defects (mm), and postoperative complications were registered. RESULTS: No significant differences were recorded for measurements of width and length of bone defect between patient bone and the biological models. CONCLUSIONS: The use of bioreplicas obtained by rapid prototyping is effective in treatment planning.

Accuracy of Virtually Planned Maxillary Distraction in Cleft Patients - An Evaluative Study.

INTRODUCTION: Maxillary distraction may be used to treat severe maxillary hypoplasia in cleft lip and palate (CLP) patients. Three-dimensional (3D) planning has been shown to increase the accuracy of distraction and reduce operative time and complications. The aim of the study was to measure the accuracy of internal maxillary distraction after 3D planning in CLP patients, to add evidence to validate the virtual osteotomy and distraction procedure. MATERIALS AND METHODS: Eleven CLP patients with severe maxillary hypoplasia underwent maxillary distraction using internal distractors. Virtual planning was used to design the osteotomies, the distractor position, and the distraction vector. Cutting and positioning guides transferred this information to the surgical procedure. Four to six month postoperative computed tomography-scan was done before distractor removal; anatomical reference points were compared to the virtual planning to determine accuracy. RESULTS: A high accuracy (point dislocation <1.5 mm) was found in 90% of the points of the surface of the maxilla; the majority of the zygomatic screws were placed within a distance of 0.8-1 mm from their planned position. DISCUSSION: The high accuracy achieved through virtual planning promotes optimal distractor placement; a customized distraction vector has a direct effect on the final position of the maxilla.

Retraction: Evaluation of periimplant bone neoformation using different scanning electron microscope methods for measuring BIC. A dog study.

In relation to the article of the Journal of Clinical and Experimental Dentistry "Calvo-Guirado JL, Aguilar-Salvatierra A, Guardia J, Delgado-Ruiz R, Ramírez-Fernández MP, Pérez-Sánchez C, Gómez-Moreno G. Evaluation of periimplant bone neoformation using different scanning electron microscope methods for measuring BIC. A dog study. J Clin Exp Dent. 2012 Feb 1;4(1):e8-e13", the authors have used three figures that are the same as those published in three different publications (J Pineal Res 2010; COIR 2010; COIR 2012). The copyright of the mentioned publications was consequently not respected. Retraction of the article is therefore decided.

Can the Macrogeometry of Dental Implants Influence Guided Bone Regeneration in Buccal Bone Defects? Histomorphometric and Biomechanical Analysis in Beagle Dogs.

The aim of this experimental animal study was to assess guided bone regeneration (GBR) and implant stability (ISQ) around two dental implants with different macrogeometries. Forty eight dental implants were placed within six Beagle dogs. The implants were divided into two groups (n = 24 per group): G1 group implants presented semi-conical macrogeometry, a low apical self-tapping portion, and an external hexagonal connection (whereby the cervical portion was bigger than the implant body). G2 group implants presented parallel walls macrogeometry, a strong apical self-tapping portion, and an external hexagonal connection (with the cervical portion parallel to the implant body). Buccal (mouth-related) defects of 2 mm (c2 condition) and 5 mm (c3 condition) were created. For the control condition with no defect (c1), implants were installed at crestal bone level. Eight implants in each group were installed under each condition. The implant stability quotient (ISQ) was measured immediately after implant placement, and on the day of sacrifice (3 months after the implant placement). Histological and histomorphometric procedures and analysis were performed to assess all samples, measuring crestal bone loss (CBL) and bone-to-implant contact (BIC). The data obtained were compared with statistical significance set at p < 0.05. The ISQ results showed a similar evolution between the groups at the two evaluation times, although higher values were found in the G1 group under all conditions. Within the limitations of this animal study, it may be concluded that implant macrogeometry is an important factor influencing guided bone regeneration in buccal defects. Group G1 showed better buccal bone regeneration (CBL) and BIC % at 3 months follow up, also parallel collar design can stimulate bone regeneration more than divergent collar design implants. The apical portion of the implant, with a stronger self-tapping feature, may provide better initial stability, even in the presence of a bone defect in the buccal area.

The Use of Tooth Particles as a Biomaterial in Post-Extraction Sockets. Experimental Study in Dogs.

Objectives: The objective of this study was to evaluate new bone formation derived from freshly crushed extracted teeth, grafted immediately in post-extraction sites in an animal model, compared with sites without graft filling, evaluated at 30 and 90 days. Material and Methods: The bilateral premolars P2, P3, P4 and the first mandibular molar were extracted atraumatically from six Beagle dogs. The clean, dry teeth were ground immediately using the Smart Dentin Grinder. The tooth particles obtained were subsequently sieved through a special sorting filter into two compartments; the upper container isolating particles over 1200 μm, the lower container isolated particles over 300 μm. The crushed teeth were grafted into the post-extraction sockets at P3, P4 and M1 (test group) (larger and smaller post-extraction alveoli), while P2 sites were left unfilled and acted as a control group. Tissue healing and bone formation were evaluated by histological and histomorphometric analysis after 30 and 90 days. Results: At 30 days, test site bone formation was greater in the test group than the control group (p < 0.05); less immature bone was observed in the test group (25.71%) than the control group (55.98%). At 90 days, significant differences in bone formation were found with more in the test group than the control group. No significant differences were found in new bone formation when comparing the small and large alveoli post-extraction sites. Conclusions: Tooth particles extracted from dog’s teeth, grafted immediately after extractions can be considered a suitable biomaterial for socket preservation.

Comparison of Two Xenograft Materials Used in Sinus Lift Procedures: Material Characterization and In Vivo Behavior.

Detailed information about graft material characteristic is crucial to evaluate their clinical outcomes. The present study evaluates the physico-chemical characteristics of two xenografts manufactured on an industrial scale deproteinized at different temperatures (non-sintered and sintered) in accordance with a protocol previously used in sinus lift procedures. It compares how the physico-chemical properties influence the material's performance in vivo by a histomorphometric study in retrieved bone biopsies following maxillary sinus augmentation in 10 clinical cases. An X-ray diffraction analysis revealed the typical structure of hydroxyapatite (HA) for both materials. Both xenografts were porous and exhibited intraparticle pores. Strong differences were observed in terms of porosity, crystallinity, and calcium/phosphate. Histomorphometric measurements on the bone biopsies showed statistically significant differences. The physic-chemical assessment of both xenografts, made in accordance with the protocol developed on an industrial scale, confirmed that these products present excellent biocompatibilitity, with similar characteristics to natural bone. The sintered HA xenografts exhibited greater osteoconductivity, but were not completely resorbable (30.80 ± 0.88% residual material). The non-sintered HA xenografts induced about 25.92 ± 1.61% of new bone and a high level of degradation after six months of implantation. Differences in the physico-chemical characteristics found between the two HA xenografts determined a different behavior for this material.

Implant Stability of Biological Hydroxyapatites Used in Dentistry.

The aim of the present study was to monitor implant stability after sinus floor elevation with two biomaterials during the first six months of healing by resonance frequency analysis (RFA), and how physico-chemical properties affect the implant stability quotient (ISQ) at the placement and healing sites. Bilateral maxillary sinus augmentation was performed in 10 patients in a split-mouth design using a bobine HA (BBM) as a control and porcine HA (PBM). Six months after sinus lifting, 60 implants were placed in the posterior maxilla. The ISQ was recorded on the day of surgery from RFA at T1 (baseline), T2 (three months), and T3 (six months). Statistically significant differences were found in the ISQ values during the evaluation period. The ISQ (baseline) was 63.8 ± 2.97 for BBM and 62.6 ± 2.11 for PBM. The ISQ (T2) was ~73.5 ± 4.21 and 67 ± 4.99, respectively. The ISQ (T3) was ~74.65 ± 2.93 and 72.9 ± 2.63, respectively. All of the used HAs provide osseointegration and statistical increases in the ISQ at baseline, T2 and T3 (follow-up), respectively. The BBM, sintered at high temperature with high crystallinity and low porosity, presented higher stability, which demonstrates that variations in the physico-chemical properties of a bone substitute material clearly influence implant stability.

Stability and Crestal Bone Behavior Following Simultaneous Placement of Multiple Dental Implants (Two or More) with the Bone Splitting Technique: A Clinical and Radiographic Evaluation.

PURPOSE: The present study aimed to measure the implant stability quotient (ISQ) values at three different time points after surgical procedures and crestal bone behavior in multiple implants (two or more) installed simultaneously with the bone splitting technique. MATERIALS AND METHODS: For this study, 45 patients with different edentulous areas in the maxilla were selected, and a total of 114 dental implants were installed. Implant stability was measured by resonance frequency analysis immediately following implant placement to assess immediate stability (time 1) and stability at 90 days (time 2), and 150 days (time 3). Crestal bone height was measured in peri-apical radiographs at 90 and 150 days after implantation in relation to each implant shoulder, given that the implants were installed at the level of the crestal bone. RESULTS: Six implants were not osseointegrated. Overall, the means and standard deviations of the ISQ values were 60.3 ± 4.94 (95% confidence interval [CI], 44-69) at baseline, 66.6 ± 5.28 (95% CI, 49-75) at 90 days, and 72.1 ± 4.28 (95% CI, 59-79) at 150 days (p < 0.0001). The mean marginal bone loss of the implants was 1.11 ± 0.61 mm on the mesial side and 1.17 ± 0.61 mm on the distal side at time 2, and 1.73 ± 0.68 mm on the mesial side and 1.79 ± 0.70 mm on the distal side at time 3. A strong positive correlation between implant stability and bone loss was detected (p < 0.0001). CONCLUSIONS: Within the limits of this study, the bone splitting technique with simultaneous implant installation exhibited a good success rate with respect to the osseointegration index but requires attention with respect to crestal bone behavior.