Diffusion-Dominated Luminescence Dynamics of CsPbBr3 Studied Using Cathodoluminescence and Microphotoluminescence Spectroscopy.

Time-resolved or time-correlation measurements using cathodoluminescence (CL) reveal the electronic and optical properties of semiconductors, such as their carrier lifetimes, at the nanoscale. However, halide perovskites, which are promising optoelectronic materials, exhibit significantly different decay dynamics in their CL and photoluminescence (PL). We conducted time-correlation CL measurements of CsPbBr3 using Hanbury Brown-Twiss interferometry and compared them with time-resolved PL. The measured CL decay time was on the order of subnanoseconds and was faster than PL decay at an excited carrier density of 2.1 × 1018 cm-3. Our experiment and analytical model revealed the CL dynamics induced by individual electron incidences, which are characterized by highly localized carrier generation followed by a rapid decrease in carrier density due to diffusion. This carrier diffusion can play a dominant role in the CL decay time for undoped semiconductors, in general, when the diffusion dynamics are faster than the carrier recombination.

Positive and Negative Impacts of Interfacial Hydrogen Bonds on Photocatalytic Hydrogen Evolution.

Understanding the behavior of water molecules at solid-liquid interfaces is crucial for various applications such as photocatalytic water splitting, a key technology for sustainable fuel production and chemical transformations. Despite extensive studies conducted in the past, the impact of the microscopic structure of interfacial water molecules on photocatalytic reactivity has not been directly examined. In this study, using real-time mass spectrometry and Fourier-transform infrared spectroscopy, we demonstrated the crucial role of hydrogen bond (H-bond) networks on the photocatalytic hydrogen evolution in thickness-controlled water adsorption layers on various TiO2 photocatalysts. Under controlled water vapor environments with relative humidity (RH) below 70%, we observed a monotonic increase in the H2 formation rate with increasing RH, indicating that reactive water molecules were present not only in the first adsorbed layer but also in several overlying layers. In contrast, at RH > 70%, when more than three water layers covered the catalyst surface, the H2 formation rate turned to decrease dramatically because of the structural rearrangement and hardening of the interfacial H-bond network induced during further water adsorption. This unique many-body effect of interfacial water was consistently observed for various TiO2 particles with different crystalline structures, including brookite, anatase, and a mixture of anatase and rutile. Our results demonstrated that depositing several water layers in a water vapor environment with RH ∼ 70% is optimal for photocatalytic hydrogen evolution rather than liquid-phase reaction conditions in aqueous solutions. This study provides molecular-level insights into designing interfacial water conditions to enhance photocatalytic performance.

Monoterpene glucosides in Eustoma grandiflorum roots promote hyphal branching in arbuscular mycorrhizal fungi.

Host plant-derived strigolactones trigger hyphal branching in arbuscular mycorrhizal (AM) fungi, initiating a symbiotic interaction between land plants and AM fungi. However, our previous studies revealed that gibberellin-treated lisianthus (Eustoma grandiflorum, Gentianaceae) activates rhizospheric hyphal branching in AM fungi using unidentified molecules other than strigolactones. In this study, we analyzed independent transcriptomic data of E. grandiflorum and found that the biosynthesis of gentiopicroside (GPS) and swertiamarin (SWM), characteristic monoterpene glucosides in Gentianaceae, was upregulated in gibberellin-treated E. grandiflorum roots. Moreover, these metabolites considerably promoted hyphal branching in the Glomeraceae AM fungi Rhizophagus irregularis and Rhizophagus clarus. GPS treatment also enhanced R. irregularis colonization of the monocotyledonous crop chive (Allium schoenoprasum). Interestingly, these metabolites did not provoke the germination of the root parasitic plant common broomrape (Orobanche minor). Altogether, our study unveiled the role of GPS and SWM in activating the symbiotic relationship between AM fungi and E. grandiflorum.

Factors Affecting the Second Complete Atypical Femoral Fracture after the First Atypical Fracture.

OBJECTIVES: Atypical femoral fracture (AFF) is an atypical low-energy subtrochanteric and diaphyseal femoral fracture. Even if bone fusion is achieved in patients with AFF, the risk of AFF in the contralateral femur must be considered. This study aimed to investigate the factors affecting complete AFF in the contralateral femur and conservatively treated incomplete AFF. SUBJECT AND METHODS: Radiographs of 111 femurs in 104 AFF cases were examined, and the femurs were classified as follows: 85 contralateral femurs with complete AFF; 18 contralateral femurs with incomplete AFF; 8 femurs with incomplete AFF without surgical treatment. Various patients' clinical data were collected, and we investigated the factors affecting the second complete AFF. RESULTS: Complete fractures occurred in 10 (9.7%) of 103 femurs without incomplete AFF at the first visit and in 3 (37.5%) of 8 femurs with incomplete AFF. The Kaplan-Meier curve revealed that lateral cortical bone thickening and thigh pain were associated with significantly poorer prognoses (p = 0.026 and p = 0.013, respectively). Multivariate analyses revealed that eldecalcitol usage after AFF onset (p = 0.0094) and previous use of bisphosphonate or denosumab (p = 0.0126) were protective factors for second complete AFF and that the presence of thigh pain (p = 0.0134) was a risk factor for second complete AFF. CONCLUSIONS: Eldecalcitol administration after bone union of first AFF may prevent AFF recurrence. In addition, painful incomplete AFF has a high risk of developing a complete fracture.

Beyond Reduction Cocatalysts: Critical Role of Metal Cocatalysts in Photocatalytic Oxidation of Methane with Water.

Environmentally sustainable and selective conversion of methane to valuable chemicals under ambient conditions is pivotal for the development of next-generation photocatalytic technology. However, due to the lack of microscopic knowledge about non-thermal methane conversion, controlling and modulating photocatalytic oxidation processes driven by photogenerated holes remain a challenge. Here, we report novel function of metal cocatalysts to accept photogenerated holes and dominate selectivity of methane oxidation, which is clearly beyond the conventional concept in photocatalysis that the metal cocatalysts loaded on the surfaces of semiconductor photocatalysts mostly capture photogenerated electrons and dominate reduction reactions exclusively. The novel photocatalytic role of metal cocatalysts was verified by operando molecular spectroscopy combined with real-time mass spectrometry for metal-loaded Ga2 O3 model photocatalysts under methane and water vapor at ambient temperature and pressure. Our concept of metal cocatalysts that work as active sites for both photocatalytic oxidation and reduction provides a new understanding of photocatalysis and a solid basis for controlling non-thermal redox reactions by metal-cocatalyst engineering.

Effects of teriparatide and low-intensity aerobic exercise on osteopenia in type 2 diabetes mellitus rats.

INTRODUCTION: In patients with type 2 diabetes mellitus (T2DM), bone fragility increases fracture risk. Teriparatide (TPTD) improves bone strength, and exercise therapy suppresses blood glucose levels in T2DM. In this study, the combined effects of TPTD and exercise therapy on trabecular and cortical bone were examined in advanced T2DM model rats. MATERIALS AND METHODS: Thirty-week-old Otsuka Long-Evans Tokushima Fatty rats were divided into four groups (n = 9-10 in each group at two time points): Cont group (vehicle-treated control), TPTD group (TPTD 30 µg/kg injected subcutaneously, 3 times/week), Exe group (treadmill exercise, 10 m/min, 60 min/day, 5 times/week), and Comb group (TPTD-treated and treadmill exercise combined). Five and 10 weeks after treatment, bone mineral density (BMD), bone strength, and bone micro-architecture were measured. RESULTS: TPTD and combined treatment significantly increased BMDs of the lumbar spine and femur compared to the Cont group (p < 0.05 to p < 0.01). In the three-point bending test of the femur, only combined treatment increased the maximum load at 5 weeks compared with the Cont and Exe groups (p < 0.01). In the compression test of the distal femoral metaphysis, both TPTD and combined treatment increased the trabecular bone strength compared with the Cont and Exe groups (p < 0.05 to p < 0.01). Although TPTD and combined treatment improved the micro-architecture of trabecular bone (p < 0.05 to p < 0.01), only combined treatment improved the micro-structures of cortical bone from 5 weeks of treatment (p < 0.05 to p < 0.01). CONCLUSION: The combination of TPTD and treadmill exercise increased BMD and trabecular and cortical bone strength of the femur with improved micro-architecture in T2DM model rats.

Valley-Polarized Plasmonic Edge Mode Visualized in the Near-Infrared Spectral Range.

Valley polarization has recently been adopted in optics, offering robust waveguiding and angular momentum sorting. The success of valley systems in photonic crystals suggests a plasmonic counterpart that can merge topological photonics and topological condensed matter systems, for instance, two-dimensional materials with the enhanced light-matter interaction. However, a valley plasmonic waveguide with a sufficient propagation distance in the near-infrared (NIR) or visible spectral range has so far not been realized due to ohmic loss inside the metal. Here, we employ gap surface plasmons for high index contrasting and realize a wide-bandgap valley plasmonic crystal, allowing waveguiding in the NIR-visible range. The edge mode with a propagation distance of 5.3 µm in the range of 1.31-1.36 eV is experimentally confirmed by visualizing the field distributions with a scanning transmission electron microscope cathodoluminescence technique, suggesting a practical platform for transferring angular momentum between photons and carriers in mesoscopic active devices.

Teriparatide and exercise improve bone, skeletal muscle, and fat parameters in ovariectomized and tail-suspended rats.

INTRODUCTION: Although teriparatide (TPTD) and exercise may improve osteoporosis, muscle atrophy, and fat metabolism during ageing, the effects of treatment with a combination of TPTD and exercise on these factors remain unclear. Therefore, this study examined the effects of TPTD and exercise on bone, skeletal muscle, and fat in ovariectomized and tail-suspended rats. MATERIALS AND METHODS: Seven-month-old female Wistar rats were ovariectomized and subjected to tail suspension. The rats were then randomized into one of the following four groups (n = 20/group) after 4 weeks: control group, treated with TPTD vehicle and no exercise; TPTD group (30 µg/kg TPTD, 3 days/week); Exercise group (treadmill at 12 m/min, 60 min/day, 5 days/week); and Combined group treated with TPTD and treadmill exercise. After 1 and 8 weeks of treatment, bone, skeletal muscle, and fat tissue parameters were evaluated. RESULTS: TPTD improved bone mineral density (BMD), bone structure, bone strength at the femoral metaphysis, and the percentage of skeletal muscle mass, and decreased the percentage of fat mass and the adipose volume in the bone marrow. Treadmill exercise increased BMD, bone strength of cancellous bone, and the percentage of skeletal muscle mass, and decreased the percentage of fat mass as seen on dual-energy X-ray absorptiometry. Furthermore, combined treatment significantly affected BMD, bone structure, and bone strength of cortical bone at the femoral diaphysis. CONCLUSION: TPTD or treadmill exercise improved bone, skeletal muscle, and fat mass. Combination therapy with TPTD and exercise had synergistic effects on BMD, structure, and bone strength in ovariectomized, tail-suspended rats.

Synergistic Effect of Chemical Substitution and Insertion on the Thermoelectric Performance of Cu26V2Ge6S32 Colusite.

Copper-based sulfides are promising materials for thermoelectric applications, which can convert waste heat into electricity. This study reports the enhanced thermoelectric performance of Cu26V2Ge6S32 colusite via substitution of antimony (Sb) for germanium (Ge) and introduction of copper (Cu) as an interstitial atom. The crystal structure of the solid solutions and Cu-rich compounds were analyzed by powder X-ray diffraction and scanning transmission electron microscopy. Both chemical approaches decrease the hole carrier concentration, which leads to a reduction in the electronic thermal conductivity while keeping the thermoelectric power factor at a high value. Furthermore, the interstitial Cu atoms act as phonon scatterers, thereby decreasing the lattice thermal conductivity. The combined effects increase the dimensionless thermoelectric figure of merit ZT from 0.3 (Cu26V2Ge6S32) to 0.8 (Cu29V2Ge5SbS32) at 673 K.

Control of Light Emission by a Plasmonic Crystal Cavity.

Surface plasmon-polaritons (SPPs) localized inside a plasmonic crystal (PlC) cavity are probed by STEM-CL technique to characterize the influence of the surface shape parameters on the cavity modes. The results elucidate the formation mechanism of the cavity mode in terms of the symmetry and quality factor, which provide a clear design guide for the PlC cavity to control the coupling between SPPs and photons in plasmonic devices and future integrated circuits.

Confinement of Surface Plasmon Polaritons by Heterostructures of Plasmonic Crystals.

Square lattice plasmonic crystals (SQ-PlCs) composed of silver pillars generate large bandgaps for surface plasmon polaritons (SPPs). SPP confinement is demonstrated using one- and two-dimensional heterostructures of SQ-PlCs comprised of cylindrical pillars with different diameters in a common square lattice. Two kinds of localized modes are observed to appear in the heterostructures by photon map imaging using cathodoluminescence (CL) technique combined with a scanning transmission electron microscopy (STEM). Angle-resolved CL spectroscopy reveals contrasting characteristics of the two localized modes in their emission distributions, indicating that they originate from the band-edge A and E modes of the matrix SQ-PlC.

Size dependence of bandgaps in a two-dimensional plasmonic crystal with a hexagonal lattice.

The optical properties of surface plasmon polaritons (SPPs) are investigated at the Г point in a two-dimensional plasmonic crystal with a hexagonal lattice (Hex-PlC). The cathodoluminescence (CL) technique combined with a scanning transmission electron microscope (STEM) are used to produce spectral images of the SPP standing waves at the Г point and identify the four types of band-edge modes predicted by group theory. The systematic measurement of the band-edge energies employed here is used to determine the characteristic dependence of each band-edge mode on the structure parameters, which provides some criteria for the design of plasmonic devices with Hex-PlCs.

Basic helix-loop-helix transcription factors JASMONATE-ASSOCIATED MYC2-LIKE1 (JAM1), JAM2, and JAM3 are negative regulators of jasmonate responses in Arabidopsis.

Jasmonates regulate transcriptional reprogramming during growth, development, and defense responses. Jasmonoyl-isoleucine, an amino acid conjugate of jasmonic acid (JA), is perceived by the protein complex composed of the F-box protein CORONATINE INSENSITIVE1 (COI1) and JASMONATE ZIM DOMAIN (JAZ) proteins, leading to the ubiquitin-dependent degradation of JAZ proteins. This activates basic helix-loop-helix-type MYC transcription factors to regulate JA-responsive genes. Here, we show that the expression of genes encoding other basic helix-loop-helix transcription factors, JASMONATE ASSOCIATED MYC2-LIKE1 (JAM1), JAM2, and JAM3, is positively regulated in a COI1- and MYC2-dependent manner in Arabidopsis (Arabidopsis thaliana). However, contrary to myc2, the jam1jam2jam3 triple mutant exhibited shorter roots when treated with methyl jasmonate (MJ), indicating enhanced responsiveness to JA. Our genome-wide expression analyses revealed that key jasmonate metabolic genes as well as a set of genes encoding transcription factors that regulate the JA-responsive metabolic genes are negatively regulated by JAMs after MJ treatment. Consistently, loss of JAM genes resulted in higher accumulation of anthocyanin in MJ-treated plants as well as higher accumulation of JA and 12-hydroxyjasmonic acid in wounded plants. These results show that JAMs negatively regulate the JA responses in a manner that is mostly antagonistic to MYC2.

Size dependence of band structures in a two-dimensional plasmonic crystal with a square lattice.

A scanning transmission electron microscope (STEM) -cathodoluminescence (CL) technique is used to investigate the size dependence of the band structures in two-dimensional plasmonic crystals with a square lattice (SQ-PlCs) composed of cylindrical pillars and holes. The experimentally determined and calculated dependences of the band edge energies of the three SPP modes at the Γ point on the diameter of the cylindrical structure agree well. The photon maps reveal the field strength distributions of the standing SPP waves of the three eigenmodes. Additionally, a mechanism is proposed to explain the dependence of the contrast on the detected light polarization.

In-situ heating-and-electron tomography for materials research: from 3D (in-situ 2D) to 4D (in-situ 3D).

In-situ observation has expanded the application of transmission electron microscopy (TEM) and has made a significant contribution to materials research and development for energy, biomedical, quantum, etc. Recent technological developments related to in-situ TEM have empowered the incorporation of three-dimensional observation, which was previously considered incompatible. In this review article, we take up heating as the most commonly used external stimulus for in-situ TEM observation and overview recent in-situ TEM studies. Then, we focus on the electron tomography (ET) and in-situ heating combined observation by introducing the authors' recent research as an example. Assuming that in-situ heating observation is expanded from two dimensions to three dimensions using a conventional TEM apparatus and a commercially available in-situ heating specimen holder, the following in-situ heating-and-ET observation procedure is proposed: (i) use a rapid heating-and-cooling function of a micro-electro-mechanical system holder; (ii) heat and cool the specimen intermittently and (iii) acquire a tilt-series dataset when the specimen heating is stopped. This procedure is not too technically challenging and can have a wide range of applications. Essential technical points for a successful 4D (space and time) observation will be discussed through reviewing the authors' example application.

Evaluation of induced pluripotent stem cell differentiation into neural progenitor cell using Raman spectra derived from extracellular vesicles in culture supernatants.

Non-invasive cell culture monitoring technology is crucial to improve the manufacturing efficiency of cell products. We have found that extracellular vesicles (EVs) are secreted into the culture supernatants in the differentiation process from human induced pluripotent stem cells (iPSCs) to dopaminergic progenitor cells, and that the composition of EVs changes in accordance with the differentiation processes. In this study, we hypothesized that it is possible to evaluate the cultured cellular states by detecting compositional changes of EVs secreted from cultured cells with label-free Raman spectroscopy in a non-invasive manner. Therefore, Raman signal analysis derived from EV fractions isolated from culture supernatants throughout the differentiation process was conducted. iPSCs cultures were simultaneously implemented under a standard condition (control) and an artificial deviation condition inducing reductions in pluripotency by depleting FGF2 in culture medium (-FGF2), which is indispensable for maintaining the pluripotency. Subsequently, the differentiation step was conducted for each iPSCs culture under the same condition. As a result, it was found that under -FGF2, the expression level of the pluripotency marker NANOG decreased compared to that of the control and correlated with the identification results based on Raman signals with a correlation coefficient of 0.77. Lipid-derived Raman signals were extracted as identification factors, suggesting that changes in the lipid component of EV occur depending on the cellular states. From the above, we have found that the change in composition of EVs in the culture supernatant by detecting Raman signals would be a monitoring index of the cellular state of differentiation and pluripotency.

A thiomolybdate cluster for visible-light-driven hydrogen evolution: comparison of homogeneous and heterogeneous approaches.

This study investigates the hydrogen evolution reaction (HER) efficiency of two photosystems incorporating an all-inorganic molecular thiomolybdate [Mo3S13]2- cluster as a HER catalyst. First, we delve into the performance of a homogeneous [Mo3S13]2-/[Ru(bpy)3]2+ (Mo3/Ru) dyad which demonstrates high turnover frequencies (TOFs) and apparent quantum yields (AQYs) at 445 nm approaching the level of 0.5%, yet its performance is marked by pronounced deactivation. In contrast, a heterogeneous approach involves anchoring [Mo3S13]2- onto graphitic carbon nitride (GCN) nanosheets through weak electrostatic association with its triazine/heptazine scaffold. [Mo3S13]2-/GCN (Mo3/GCN) displays effective H2 generation under visible light, with TOF metrics on par with those of its homogeneous analog. Although substantial leaching of [Mo3S13]2- species from the Mo3/GCN surface occurs, the remaining {Mo3}-based centers demonstrate impressive stability, leading to enduring HER performance, starkly distinguishing it from the homogeneous Mo3/Ru photosystem. Photoluminescence (PL) quenching experiments confirm that the performance of Mo3/GCN is not limited by the quality of the inorganic interface, but could be optimized by using higher surface area supports or a higher concentration of [Mo3S13]2- sites. Our findings showcase complexities underlying the evaluation and comparison of photosystems comprising well-defined catalytic centers and pave the way for developing analogous surface-supported (photo)catalysts with broad use in energy applications.

Three-dimensional electron tomography and recent expansion of its applications in materials science.

Electron tomography (ET) is a powerful tool for elucidating the properties and functionalities of materials. The innovative development of aberration-corrected electron microscopy in the early 21st century and the remarkable progress in the development of detectors, equipment and devices related to ET have resulted in substantial improvements in resolution. However, not only advances in hardware but also remarkable developments in reconstruction algorithms and related three-dimensional (3D) analysis methods have contributed to the resolution improvements. ET has its own problems, including the missing-wedge problem due to the limited tilt-angle range and the need to acquire numerous specimen-tilt images, the latter of which is time-consuming and can potentially damage the specimen. This review paper aims to (i) describe the established basic theories and definitions regarding 3D resolution of ET and practical 3D resolution measurement methods, (ii) discuss various reconstruction algorithms that effectively overcome the aforementioned problems and (iii) describe recent progress in the core of ET applications in materials science with respect to atomic ET, analytical ET and in-situ ET. The aforementioned ET problems have been addressed with each method developed in each field of application. Notably, in terms of aim (ii), recently developed reconstruction algorithms can reduce the number of projection images (specimen-tilt images) needed to attain a certain resolution without violating the Nyquist criterion. This approach is interpreted as a novel non-linear sampling theorem.

Critical impacts of interfacial water on C-H activation in photocatalytic methane conversion.

On-site and on-demand photocatalytic methane conversion under ambient conditions is one of the urgent global challenges for the sustainable use of ubiquitous methane resources. However, the lack of microscopic knowledge on its reaction mechanism prevents the development of engineering strategies for methane photocatalysis. Combining real-time mass spectrometry and operando infrared absorption spectroscopy with ab initio molecular dynamics simulations, here we report key molecular-level insights into photocatalytic green utilization of methane. Activation of the robust C-H bond of methane is hardly induced by the direct interaction with photogenerated holes trapped at the surface of photocatalyst; instead, the C-H activation is significantly promoted by the photoactivated interfacial water species. The interfacial water hydrates and properly stabilizes hydrocarbon radical intermediates, thereby suppressing their overstabilization. Owing to these water-assisted effects, the photocatalytic conversion rates of methane under wet conditions are dramatically improved by typically more than 30 times at ambient temperatures (~300 K) and pressures (~1 atm) in comparison to those under dry conditions. This study sheds new light on the role of interfacial water and provides a firm basis for design strategies for non-thermal heterogeneous catalysis of methane under ambient conditions.

In situ electron tomography for the thermally activated solid reaction of anaerobic nanoparticles.

The nanoscale characterization of thermally activated solid reactions plays a pivotal role in products manufactured by nanotechnology. Recently, in situ observation in transmission electron microscopy combined with electron tomography, namely four-dimensional observation for heat treatment of nanomaterials, has attracted great interest. However, because most nanomaterials are highly reactive, i.e., oxidation during transfer and electron beam irradiation would likely cause fatal artefacts; it is challenging to perform the artifact-free four-dimensional observation. Herein, we demonstrate our development of a novel in situ three-dimensional electron microscopy technique for thermally activated solid-state reaction processes in nanoparticles (NPs). The sintering behaviour of Cu NPs was successfully visualized and analyzed in four-dimensional space-time. An advanced image processing protocol and a newly designed state-of-the-art MEMS-based heating holder enable the implementation of considerably low electron dose imaging and prevent air exposure, which is of central importance in this type of observation. The total amount of electron dose for a single set of tilt-series images was reduced to 250 e- nm-2, which is the lowest level for inorganic materials electron tomography experiments. This study evaluated the sintering behaviour of Cu NPs in terms of variations in neck growth and particle distance. A negative correlation between the two parameters is shown, except for the particle pair bound by neighbouring NPs. The nanoscale characteristic sintering behavior of neck growth was also captured in this study.