RESUMEN
The relevance of airborne exposure to SARS-CoV-2 in indoor environments is a matter of research and debate, with special importance for healthcare low-risk settings. Experimental approaches to the bioaerosol sampling are neither standardized nor optimized yet, leading in some cases to limited representativity of the temporal and spatial variability of viral presence in aerosols. Airborne viral viability moreover needs to be assessed. A study has been conducted collecting five 24-h PM10 samples in a COVID-19 geriatric ward in late June 2020, and detecting E and RdRp genes by RT-qPCR with a Ct between 36 and 39. The viral RNA detection at Ct = 36 was related to the maximal numerosity of infected patients hosted in the ward. Lacking a direct infectivity assessment for the collected samples an experimental model has been defined, by seeding twelve nasopharyngeal swab extracts from COVID-19 positive patients on Vero E6 cells; only the four extracts with a viral load above E+10 viral copies (approximately Ct<24) have been able to establish a persistent infection in vitro. Therefore, the cytopathic effect, a key feature of residual infectivity, could be considered unlikely for the environmental PM10 samples showing amplification of viral RNA at Ct = 36 or higher. A standardization of airborne SARS-CoV-2 long-term monitoring and of environmental infectivity assessment is urgently needed.
Asunto(s)
Contaminación del Aire Interior , COVID-19 , Aerosoles , Anciano , Monitoreo del Ambiente , Humanos , SARS-CoV-2RESUMEN
N-(4-Nitrobenzoyl)-Phe self-assembled into a transparent supramolecular hydrogel, which displayed high fibroblast and keratinocyte cell viability. The compound showed a mild antimicrobial activity against E. coli both as a hydrogel and in solution. Single-crystal XRD data revealed packing details, including protonation of the C-terminus due to an apparent pKa shift, as confirmed by pH titrations. MicroRaman analysis revealed almost identical features between the gel and crystal states, although more disorder in the former. The hydrogel is thermoreversible and disassembles within a range of temperatures that can be fine-tuned by experimental conditions, such as gelator concentration. At the minimum gelling concentration of 0.63â wt %, the hydrogel disassembles in a physiological temperature range of 39-42 °C, thus opening the way to its potential use as a biomaterial.
Asunto(s)
Antiinfecciosos/química , Materiales Biocompatibles/química , Hidrogeles/química , Aminoácidos/química , Animales , Antiinfecciosos/farmacología , Materiales Biocompatibles/farmacología , Línea Celular , Supervivencia Celular/efectos de los fármacos , Dicroismo Circular , Cristalografía por Rayos X , Escherichia coli/efectos de los fármacos , Humanos , Ratones , Conformación Molecular , Células 3T3 NIHRESUMEN
The chiral (R)-10-hydroxystearic acid ((R)-10-HSA) is a positional homologue of both (R)-12-HSA and (R)-9-HSA with the OH group in an intermediate position. While (R)-12-HSA is one of the best-known low-molecular-weight organogelators, (R)-9-HSA is not, but it forms crystals in several solvents. With the aim to gain information on the structural role of hydrogen-bonding interactions of the carbinol OH groups, we investigated the behavior of (R)-10-HSA in various solvents. This isomer displays an intermediate behavior between (R)-9 and (R)-12-HSA, producing a stable gel exclusively in paraffin oil, while it crystallizes in other organic solvents. Here, we report the X-ray structure of a single crystal of (R)-10-HSA as well as some structural information on its polymorphism, obtained through X-ray Powder Diffraction (XRPD) and Infrared Spectroscopy (IR). This case study provides new elements to elucidate the structural determinants of the microscopic architectures that lead to the formation of organogels of stearic acid derivatives.
Asunto(s)
Cristalización , Geles/química , Solventes/química , Ácidos Esteáricos/química , Enlace de Hidrógeno , Peso Molecular , EstereoisomerismoRESUMEN
The objective of this paper is to emphasize the fact that while consistent interest has been paid to the industrial use of chitosan, minor attention has been devoted to spread the knowledge of a good characterization of its physico-chemical properties. Therefore, the paper attempts to critically comment on the conflicting experimental results, highlighting the facts, the myths and the controversies. The goal is to indicate how to take advantage of chitosan versatility, to learn how to manage its variability and show how to properly tackle some unexpected undesirable features. In the sections of the paper various issues that relate chitosan properties to some basic features and to advanced solutions and applications are presented. The introduction outlines some historical pioneering works, where the chemistry of chitosan was originally explored. Thereafter, particular reference is made to analytical purity, characterization and chain modifications. The macromolecular characterization is mostly related to molecular weight and to degree of acetylation, but also refers to the conformational and rheological properties and solution stability. Then, the antimicrobial activity of chitosan in relation with its solubility is reviewed. A section is dedicated to the formulation of chitosan biomaterials, from gel to nanobeads, exploring their innovative application as active carrier nanoparticles. Finally, the toxicity issue of chitosan as a polymer and as a constructed nanomaterial is briefly commented in the conclusions.
Asunto(s)
Quitosano/química , Acetilación , Materiales Biocompatibles/química , Humanos , Peso Molecular , Nanopartículas/química , Polímeros/química , Solubilidad , Soluciones/químicaRESUMEN
In the wake of the COVID-19 pandemic, the surveillance and safety measures of indoor Cultural Heritage sites have become a paramount concern due to the unique challenges posed by their enclosed environments and high visitor volumes. This communication explores the integration of Artificial Intelligence (AI) in enhancing epidemiological surveillance and health safety protocols in these culturally significant spaces. AI technologies, including machine learning algorithms and Internet of Things (IoT) sensors, have shown promising potential in monitoring air quality, detecting pathogens, and managing crowd dynamics to mitigate the spread of infectious diseases. We review various applications of AI that have been employed to address both direct health risks and indirect impacts such as visitor experience and preservation practices. Additionally, this paper discusses the challenges and limitations of AI deployment, such as ethical considerations, privacy issues, and financial constraints. By harnessing AI, Cultural Heritage sites can not only improve their resilience against future pandemics but also ensure the safety and well-being of visitors and staff, thus preserving these treasured sites for future generations. This exploration into AI's role in post-COVID surveillance at Cultural Heritage sites opens new frontiers in combining technology with traditional conservation and public health efforts, providing a blueprint for enhanced safety and operational efficiency in response to global health challenges.
RESUMEN
Studies on bioaerosol bacterial biodiversity have relevance in both ecological and health contexts, and molecular methods, such as 16S rRNA gene-based barcoded sequencing, provide efficient tools for the analysis of airborne bacterial communities. Standardized methods for sampling and analysis of bioaerosol DNA are lacking, thus hampering the comparison of results from studies implementing different devices and procedures. Three samplers that use gelatin filtration, swirling aerosol collection, and condensation growth tubes for collecting bioaerosol at an aeration tank of a wastewater treatment plant in Trieste (Italy) were used to determine the bacterial biodiversity. Wastewater samples were collected directly from the untreated sewage to obtain a true representation of the microbiological community present in the plant. Different samplers and collection media provide an indication of the different grades of biodiversity, with condensation growth tubes and DNA/RNA shieldTM capturing the richer bacterial genera. Overall, in terms of relative abundance, the air samples have a lower number of bacterial genera (64 OTUs) than the wastewater ones (75 OTUs). Using the metabarcoding approach to aerosol samples, we provide the first preliminary step toward the understanding of a significant diversity between different air sampling systems, enabling the scientific community to orient research towards the most informative sampling strategy.
RESUMEN
In recent years, antimicrobial peptides (AMPs) have enjoyed a renaissance, as the world is currently facing an emergency in terms of severe infections that evade antibiotics' treatment. This is due to the increasing emergence and spread of resistance mechanisms. Covalent conjugation with polymers is an interesting strategy to modulate the pharmacokinetic profile of AMPs and enhance their biocompatibility profile. It can also be an effective approach to develop active coatings for medical implants and devices, and to avoid biofilm formation on their surface. In this concise review, we focus on the last 5 years' progress in this area, pertaining in particular to AMPs that contain d-amino acids, as well as their role, and the advantages that may arise from their introduction into AMPs.
RESUMEN
BACKGROUND: Standardized methods for testing Viral Filtration Efficiency (VFE) of tissues and devices are lacking and few studies are available on aerosolizing, sampling and assessing infectivity of SARS-CoV-2 in controlled laboratory settings. NanoAg-coated endonasal filters appear a promising aid for lowering viable virus inhalation in both adult and younger populations (e.g., adolescents). OBJECTIVE: to provide an adequate method for testing SARS-CoV-2 bioaerosol VFE of bio-gel Ag nanoparticles endonasal filters, by a model system, assessing residual infectivity as cytopathic effect and viral proliferation on in vitro cell cultures. METHODS: A SARS-CoV-2 aerosol transmission chamber fed by a BLAM aerosol generator produces challenges (from very high viral loads (105 PFU/mL) to lower ones) for endonasal filters positioned in a Y shape sampling port connected to a Biosampler. An aerosol generator, chamber and sampler are contained in a class II cabinet in a BSL3 facility. Residual infectivity is assessed from aliquots of liquid collecting bioaerosol, sampled without and with endonasal filters. Cytopathic effect as plaque formation and viral proliferation assessed by qRT-PCR on Vero E6 cells are determined up to 7 days post inoculum. RESULTS: Each experimental setting is replicated three times and basic statistics are calculated. Efficiency of aerosolization is determined as difference between viral load in the nebulizer and in the Biosampler at the first day of experiment. Efficiency of virus filtration is calculated as RNA viral load ratio in collected bioaerosol with and without endonasal filters at the day of the experiment. Presence of infectious virus is assessed by plaque forming unit assay and RNA viral load variations. CONCLUSIONS: A procedure and apparatus for assessing SARS-CoV-2 VFE for endonasal filters is proposed. The apparatus can be implemented for more sophisticated studies on contaminated aerosols.
Asunto(s)
COVID-19 , Nanopartículas del Metal , Adulto , Adolescente , Humanos , SARS-CoV-2 , Aerosoles y Gotitas Respiratorias , COVID-19/prevención & control , Plata , ARNRESUMEN
Severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) is mainly transmitted through respiratory droplets, aerosols, or direct contact with fomites from an infected subject. It has been reported that SARS-CoV-2 is stable and viable in aerosol up to 16 h in controlled laboratory conditions. However, the aerosolization conditions varied a lot between the studies. In this work, an experimental laboratory model of SARS-CoV-2 aerosolization was established, employing an impinger nebulizer, a cylindrical chamber for aerosol travel, and a SKC biosampler for the collection of particles. The efficiency of the system was assessed based on the molecular determination of the viral load in the nebulizer after the aerosolization and in the aerosol collected at the end of the travel. Moreover, the residual infectivity was tested in vitro on the Vero E6 cell line, through the observation of the cytopathic effect (CPE), and the quantification of the viral load in the supernatants at 7 days post inoculation (dpi). A high RNA viral load was found in the SKC biosampler after aerosolization, indicating that it was possible to transport a high virus titer through the 30-cm chamber with all the dilutions (initial 105, 104, 103 plaque forming unit-PFU/mL). At the 7 dpi, an increment of the RNA viral load was determined for the dilutions 105 and 104 PFU/mL tested, while only the initial 105 PFU/mL resulted in visible CPE. Our findings allowed us to achieve the resilience of SARS-CoV-2 in aerosol form, at a concentration comparable to those reported for clinical samples. This mode of transmission should be considered for the mitigation and preventive measures to counteract SARS-CoV-2 spreading.
Asunto(s)
COVID-19 , SARS-CoV-2 , Aerosoles , Fómites , Humanos , LaboratoriosRESUMEN
Self-assembling peptides are being applied both in the biomedical area and as building blocks in nanotechnology. Their applications are closely linked to their modes of self-assembly, which determine the functional nanostructures that they form. This work brings together two structural elements that direct nanoscale self-association in divergent directions: proline as a ß-breaker and the ß-structure-associated diphenylalanine motif, into a single tripeptide sequence. Amino acid chirality was found to resolve the tension inherent to these conflicting self-assembly instructions. Stereoconfiguration determined the ability of each of the eight possible Pro-Phe-Phe stereoisomers to self-associate into diverse nanostructures, including nanoparticles, nanotapes, or fibrils, which yielded hydrogels with gel-to-sol transition at a physiologically relevant temperature. Three single-crystal structures and all-atom molecular dynamics simulations elucidated the ability of each peptide to establish key interactions to form long-range assemblies (i,e., stacks leading to gelling fibrils), medium-range assemblies (i.e., stacks yielding nanotapes), or short-range assemblies (i.e., dimers or trimers that further associated into nanoparticles). Importantly, diphenylalanine is known to serve as a binding site for pathological amyloids, potentially allowing these heterochiral systems to influence the fibrillization of other biologically relevant peptides. To probe this hypothesis, all eight Pro-Phe-Phe stereoisomers were tested in vitro on the Alzheimer's disease-associated Aß(1-42) peptide. Indeed, one nonfibril-forming stereoisomer effectively inhibited Aß fibrillization through multivalent binding between diphenylalanine motifs. This work thus defined heterochirality as a useful feature to strategically develop future therapeutics to interfere with pathological processes, with the additional value of resistance to protease-mediated degradation and biocompatibility.
Asunto(s)
Nanoestructuras , Péptidos , Amiloide , Hidrogeles , NanotecnologíaRESUMEN
Bisphenol A glycidylmethacrylate (BisGMA)/triethyleneglycol dimethacrylate (TEGDMA) thermosets and composites are well-known examples of biomaterials for dental applications that are receiving growing interest for orthopedic applications. While mechanical bulk properties are guaranteed by the presence of reinforcing fibers, in vitro and in vivo performances of these materials are ultimately driven by their ability to establish proper interactions between their surface and the surrounding tissues. Hence, the development of novel chemical processes enabling the introduction of bioactive molecules on the surface of these methacrylate-based thermosets is of particular interest. In the present work, we have devised a chemical strategy to expose carboxylic groups on the surface of the BisGMA/TEGDMA thermoset. The presence of negative charges was confirmed by Fourier transform infrared-attenuated total reflectance and by UV-vis spectrophotometry. Bulk mechanical properties and surface morphology of the thermoset were only slightly affected upon chemical functionalization. The activated material was further refined by the deposition of a lactose-modified chitosan (chitlac) driven by strong electrostatic interactions. The presence of the bioactive polysaccharide was confirmed by fluorescence spectroscopy and by confocal laser scanning microscopy measurements. Scratch tests were performed to evaluate the mechanical behavior of the coating. Finally, in vitro tests revealed that the presence of chitlac led to a slight enhancement of cell proliferation with respect to the unmodified BisGMA/TEGDMA thermoset. This effect was more pronounced when chitlac decorated with an arginine-glycine-aspartic acid (RGD) peptide was used in the preparation of the coating. In the latter case, the in vitro performance of the coated BisGMA/TEGDMA thermoset became comparable with that of clinically used roughened titanium.
Asunto(s)
Bisfenol A Glicidil Metacrilato/química , Polietilenglicoles/química , Ácidos Polimetacrílicos/química , Polisacáridos/química , Espectrofotometría Ultravioleta , Propiedades de SuperficieRESUMEN
Raman mapping in combination with uni- and multi-variate methods of data analysis is applied to articular cartilage samples. Main differences in biochemical composition and collagen fibers orientation between superficial, middle and deep zone of the tissue are readily observed in the samples. Collagen, non-collagenous proteins, proteoglycans and nucleic acids can be distinguished on the basis of their different spectral characteristics, and their relative abundance can be mapped in the label-free tissue samples, at so high a resolution as to permit the analysis at the level of single cells. Differences between territorial and inter-territorial matrix, as well as inhomogeneities in the inter-territorial matrix, are properly identified. Multivariate methods of data analysis prove to be complementary to the univariate approach. In particular, our partial least squares regression model gives a semiquantitative mapping of the biochemical constituents in agreement with average composition found in the literature. The combination of hierarchical and fuzzy cluster analysis succeeds in detecting variations between different regions of the extra-cellular matrix. Because of its characteristics as an imaging technique, Raman mapping could be a promising tool for studying biochemical changes in cartilage occurring during aging or osteoarthritis.
Asunto(s)
Cartílago Articular/química , Análisis Multivariante , Espectrometría Raman/métodos , Animales , Cartílago Articular/citología , Análisis por Conglomerados , Matriz Extracelular/química , Análisis de Componente Principal , PorcinosRESUMEN
The uncapped tripeptide DPhe-Phe-Leu acts as self-assembly template to yield supramolecular hydrogel biomaterials. As an example, self-assembling DPhe-Phe-Leu-Asp-Val contains the LDV bioadhesive motif for ß1 integrin activation. Hydrogels made of the two peptides successfully mimic fibronectin of the extracellular matrix and lead to high cell viability, adhesion, and spreading.
Asunto(s)
Hidrogeles/química , Imagen Óptica , Péptidos/química , Adhesión Celular , Supervivencia Celular , Fibroblastos/química , Humanos , Sustancias Macromoleculares/química , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Diphenylalanine is an amyloidogenic building block that can form a versatile array of supramolecular materials. Its shortcomings, however, include the uncontrolled hierarchical assembly into microtubes of heterogeneous size distribution and well-known cytotoxicity. This study rationalized heterochirality as a successful strategy to address both of these pitfalls and it provided an unprotected heterochiral dipeptide that self-organized into a homogeneous and optically clear hydrogel with excellent ability to sustain fibroblast cell proliferation and viability. Substitution of one l-amino acid with its d-enantiomer preserved the ability of the dipeptide to self-organize into nanotubes, as shown by single-crystal XRD analysis, whereby the pattern of electrostatic and hydrogen bonding interactions of the backbone was unaltered. The effect of heterochirality was manifested in subtle changes in the positioning of the aromatic side chains, which resulted in weaker intermolecular interactions between nanotubes. As a result, d-Phe-l-Phe self-organized into homogeneous nanofibrils with a diameter of 4 nm, corresponding to two layers of peptides around a water channel, and yielded a transparent hydrogel. In contrast with homochiral Phe-Phe stereoisomer, it formed stable hydrogels thermoreversibly. d-Phe-l-Phe displayed no amyloid toxicity in cell cultures with fibroblast cells proliferating in high numbers and viability on this biomaterial, marking it as a preferred substrate over tissue-culture plastic. Halogenation also enabled the tailoring of d-Phe-l-Phe self-organization. Fluorination allowed analogous supramolecular packing as confirmed by XRD, thus nanotube formation, and gave intermediate levels of bundling. In contrast, iodination was the most effective strategy to augment the stability of the resulting hydrogel, although at the expense of optical transparency and biocompatibility. Interestingly, iodine presence hindered the supramolecular packing into nanotubes, resulting instead into amphipathic layers of stacked peptides without the occurrence of halogen bonding. By unravelling fine details to control these materials at the meso- and macro-scale, this study significantly advanced our understanding of these systems.
RESUMEN
N-linked or O-linked glycans derived from glycoprotein processing carry, an N-acetylglucosamine or an N-acetylgalactosamine respectively, at their reducing termini. The presence of the N-acetylamino group on C-2 of reducing sugar residues has been reported to hamper the derivatization reaction with a chromophore at the anomeric centre. In this paper N-acetyllactosamine, N-acetylglucosamine, N-acetylgalactosamine and several other neutral monosaccharides are coupled to three different dyes (4-aminobenzonitrile, 2-aminopyridine, 2-aminobenzoic acid (2-AA)) by reductive amination and analysed by CE with UV detection. The 2-AA derivatives showed the lowest concentration detection limits, varying approximately in the 2-3 muM range for the saccharides tested including the N-acetamido ones. The possibility to separate and detect with the same sensitivity ten 2-AA-labelled monosaccharides mainly found in mammalian or plant glycoproteins in a single CE run is highlighted. The analysis has been carried out in less than 25 min using the borate-complexation method in CZE mode. The influence of the strength of the acid used as catalyst in the chemical modification of the sugars with 2-AA is also shortly addressed.
Asunto(s)
Amino Azúcares/análisis , Cromatografía Capilar Electrocinética Micelar/métodos , Electroforesis Capilar/métodos , Acetilgalactosamina/análisis , Acetilglucosamina/análisis , Aminopiridinas/química , Concentración de Iones de Hidrógeno , Nitrilos/química , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , ortoaminobenzoatos/químicaRESUMEN
Alginate/hydroxyapatite composite scaffolds were developed using a novel production design. Hydroxyapatite (HAp) was incorporated into an alginate solution and internal gelling was induced by addition of slowly acid hydrolyzing d-gluconic acid delta-lactone (GDL) for the direct release of calcium ions from HAp. Hydrogels were then freeze-casted to produce a three-dimensional isotropic porous network. Scanning electron microscopy (SEM) observations, confocal laser scanning microscopy (CLSM) and microcomputed tomography (micro-CT) analysis of the scaffolds showed an optimal interconnected porous structure with pore sizes ranging between 100 and 300 microm and over 88% porosity. Proliferation assay and SEM observations demonstrated that human osteosarcoma cell lines were able to proliferate, maintain osteoblast-like phenotype and massively colonize the scaffold structure. Overall, these combined results indicate that the novel alginate based composites efficiently support the adhesion and proliferation of cells showing at the same time adequate structural and physical-chemical properties for being used as scaffolds in bone tissue engineering strategies.
Asunto(s)
Alginatos/química , Materiales Biocompatibles , Desarrollo Óseo , Durapatita/química , Línea Celular Tumoral , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Humanos , Microscopía Confocal , Microscopía Electrónica de Rastreo , Ingeniería de TejidosRESUMEN
In this work we study (i) the formation and stabilization of silver nanoparticles in a bioactive chitosan-derived polysaccharide solution, (ii) the antimicrobial properties, either in solution or in 3D hydrogel structures, obtained by mixtures with the polysaccharide alginate, and (iii) the cytotoxicity of the latter nanocomposite materials on different eukaryotic cell lines. Antimicrobial results show that these nanocomposite systems display a very effective bactericidal activity toward both Gram+ and Gram- bacteria. However, the hydrogel does not show any cytotoxic effect toward three different eukaryotic cell lines. This is due to the fact that the nanoparticles, immobilized in the gel matrix, can exert their antimicrobial activity by simple contact with the bacterial membrane, while they can not be uptaken and internalized by eukaryotic cells. This novel finding could advantageously contribute to responding to the growing concerns on the toxicity of nanoparticles and facilitate the use of silver-biopolymer composites in the preparation of biomaterials.
Asunto(s)
Antibacterianos/farmacología , Nanopartículas del Metal , Plata/química , Antibacterianos/química , Escherichia coli/efectos de los fármacos , Citometría de Flujo , Hidrogeles , Espectrometría de Masas , Pruebas de Sensibilidad Microbiana , Microscopía Electrónica de Transmisión , Pseudomonas aeruginosa/efectos de los fármacos , Espectrofotometría Ultravioleta , Staphylococcus aureus/efectos de los fármacosRESUMEN
Galectin-1 is a 14 kDa beta-galactoside binding protein, capable of forming lattice-like structures with glycans of cellular glycoconjugates and inducing intracellular signaling. The expression of Galectin-1 in porcine cartilage is described in this work for the first time. Immunocytochemical methods revealed distinct distribution patterns for both articular and growth plate cartilage. In articular cartilage, the highest reactivity for Galectin-1 was found in all chondrocytes at the superficial zone and in most of those at the lower layer of the middle zone. In the growth plate, marked reactivity was seen in chondrocytes at the proliferative zone and reached a maximum level for the column-forming cells at the hypertrophic zone. In addition, different Galectin-1 distribution patterns were observed at the subcellular level. With regards to the metabolic effects of Galectin-1, the results in vitro seem to indicate an inhibitory effect of Galectin-1 on articular chondrocyte anabolism (i.e. inhibition of cell proliferation and anabolic gene expression) and a stimulation of catabolic processes (i.e. induction of matrix degradation and hypertrophy marker expression). These data represent a starting point for the understanding the molecular mechanisms underlining ECM-Galectin-1 interaction and the subsequent signaling-cell transduction processes involving cartilage formation and maturation.
Asunto(s)
Cartílago , Condrocitos/fisiología , Matriz Extracelular , Galectina 1/metabolismo , Animales , Cartílago/citología , Cartílago/metabolismo , Adhesión Celular/fisiología , Ciclo Celular/fisiología , Proliferación Celular , Condrocitos/citología , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Galectina 1/genética , PorcinosRESUMEN
AIM: To test the efficacy and toxicity of exosomal doxorubicin (exoDOX) compared with free doxorubicin. MATERIALS & METHODS: The cytotoxic effects of exoDOX were tested in vitro and in nude mice by measuring the tumor volume. The toxic effects were evaluated by measuring the bodyweight and through histopathologic analyses. The biodistribution of DOX was assessed by MS. RESULTS: In vitro and in vivo studies showed that exosomes did not decrease the efficacy of DOX. Surprisingly, exoDOX showed no cardiotoxicity as observed in DOX-treated mice and MS studies confirmed that the accumulation of exoDOX in the heart was reduced by approximately 40%. CONCLUSION: We demonstrated that exoDOX was less toxic than DOX through its altered biodistribution.
RESUMEN
An efficient and rapid synthesis of the derivative of the biocompatible polymer poly(styrene co-maleic acid) with Linear B disaccharide (Galili antigen) was achieved. The oligosaccharide portion was obtained by a transglycosylation reaction catalyzed by coffee bean alpha-D-galactosidase using p-nitrophenyl-alpha-D-galactopyranoside both as donor and as acceptor. The reaction was carried out in aqueous buffer without any organic cosolvent. The molar yield (30%) and the regioselectivity (82%) were significantly improved with respect to the data so far reported in the literature. The selective reduction of the p-nitrophenyl group afforded the p-aminophenyl derivative of Linear B disaccharide. Linkage of this derivative via an amidic bond to the poly(styrene co-maleic acid) was obtained by using N'-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride and N-hydroxysuccinimide. The products were chemically characterized by ionspray mass spectrometry, infrared, (13)C- and (1)H-nuclear magnetic resonance. The glycopolymer specifically reacts with human serum containing antibodies and with a mixture of partially purified human IgG and IgM anti-Linear B. It efficiently protects pig kidney PK15 cells from cytotoxic effects of human serum.