RESUMEN
PURPOSE: Compartment syndrome remains difficult to diagnose early in its clinical course. Pressure transducer catheters have been used to directly measure intracompartmental pressure (ICP), but this method is unreliable, with a false positive rate of 35%. We have previously used intramuscular near infrared spectroscopy to detect changes in tissue oxygen saturation (StO2) in response to increasing ICP using a novel implantable probe. However, measuring StO2 may not be sufficient to identify CS in the clinical setting. The pathophysiology of CS consists of increased ICP, leading to decreased tissue perfusion, and resulting in reduced tissue oxygenation. More clinically useful information may come from the integration of multiple data streams to aid in the diagnosis of CS. In this study, we present a novel, intramuscular probe capable of simultaneous measurement of ICP, StO2, and microvascular blood flow in a porcine model of ACS. METHODS: Proof of concept for this device is demonstrated in a porcine lower extremity balloon compression model of ACS. Pressure was maintained for 20 min (short-term) or 3 h (long-term) before the balloon volume was removed. RESULTS: In both short- and long-term experiments, as ICP increased with increasing balloon volume, the novel multimodal sensor simultaneously and reliably detected pressure elevation and corresponding reversible reductions in microvascular flow rate and tissue oxygenation. CONCLUSION: This novel trimodal device simultaneously measured the elevated ICP, decreased perfusion, and tissue ischemia of evolving ACS, substantiating our basic understanding of CS pathophysiology.
Asunto(s)
Síndromes Compartimentales , Modelos Animales de Enfermedad , Extremidad Inferior , Músculo Esquelético , Animales , Porcinos , Síndromes Compartimentales/diagnóstico , Síndromes Compartimentales/fisiopatología , Músculo Esquelético/fisiopatología , Músculo Esquelético/irrigación sanguínea , Músculo Esquelético/metabolismo , Extremidad Inferior/fisiopatología , Extremidad Inferior/irrigación sanguínea , Espectroscopía Infrarroja Corta/instrumentación , Espectroscopía Infrarroja Corta/métodos , Presión , Oxígeno/metabolismo , Oxígeno/sangre , Tecnología Inalámbrica/instrumentación , Flujo Sanguíneo Regional/fisiología , Microcirculación/fisiología , Prueba de Estudio Conceptual , Saturación de Oxígeno/fisiologíaRESUMEN
In this study, as system-level photodetectors, light-to-frequency conversion circuits (LFCs) are realized by i) photosensitive ring oscillators (ROs) composed of amorphous indium-gallium-zinc-oxide/single-walled carbon nanotube (a-IGZO/SWNT) thin film transistors (TFTs) and ii) phase-locked-loop Si circuits built with frequency-to-digital converters (PFDC). The 3-stage ROs and logic gates based on a-IGZO/SWNT TFTs successfully demonstrate its performance on flexible substrates. Herein, along with the advantage of scalability, a-IGZO films are used as photosensitive n-type TFTs and SWNTs are employed as photo-insensitive p-type TFTs for better photosensitivity in circuit level. Through the controlling a post-annealing condition of a-IGZO film, responsivities and detectivities of a-IGZO TFTs are obtained as 36 AW-1 and 0.3 × 1012 Jones for red, 93 AW-1 and 3.1 × 1012 Jones for green, and 194 AW-1 and 11.7 × 1012 Jones for blue. Furthermore, as an advanced demonstration for practical application of LFCs, a unique circuit (i.e., PFDC) is designed to analyze the generated oscillation frequency (fosc ) from the LFC device and convert it to a digital code. As a result, the designed PFDC can exactly count the generated fosc from the flexible a-IGZO/SWNT ROs under light illumination with an outstanding sensitivity and assign input frequencies to respective digital code.
RESUMEN
In recent past, for next-generation device opportunities such as sub-10 nm channel field-effect transistors (FETs), tunneling FETs, and high-end display backplanes, tremendous research on multilayered molybdenum disulfide (MoS2 ) among transition metal dichalcogenides has been actively performed. However, nonavailability on a matured threshold voltage control scheme, like a substitutional doping in Si technology, has been plagued for the prosperity of 2D materials in electronics. Herein, an adjustment scheme for threshold voltage of MoS2 FETs by using self-assembled monolayer treatment via octadecyltrichlorosilane is proposed and demonstrated to show MoS2 FETs in an enhancement mode with preservation of electrical parameters such as field-effect mobility, subthreshold swing, and current on-off ratio. Furthermore, the mechanisms for threshold voltage adjustment are systematically studied by using atomic force microscopy, Raman, temperature-dependent electrical characterization, etc. For validation of effects of threshold voltage engineering on MoS2 FETs, full swing inverters, comprising enhancement mode drivers and depletion mode loads are perfectly demonstrated with a maximum gain of 18.2 and a noise margin of ≈45% of 1/2 VDD . More impressively, quantum dot light-emitting diodes, driven by enhancement mode MoS2 FETs, stably demonstrate 120 cd m-2 at the gate-to-source voltage of 5 V, exhibiting promising opportunities for future display application.
RESUMEN
Active matrix (AM) quantum-dot light-emitting diodes (QLEDs) driven by thin-film transistors (TFTs) have attracted significant attention for use in next-generation displays. Several challenges remain for the realisation of AM-QLEDs, such as device design, fabrication process, and integration between QLEDs and TFTs, depending on their device structures and configurations. Herein, efficient and stable AM-QLEDs are demonstrated using conventional and inverted structured QLEDs (C- and I-QLEDs, respectively) combined with facile type-convertible (p- and n-type) single-walled carbon nanotube (SWNT)-based TFTs. Based on the four possible configurations of the QLED-TFT subpixel, the performance of the SWNT TFT-driven QLEDs and the fabrication process to determine the ideal configuration are compared, taking advantage of each structure for AM-QLEDs. The QLEDs and TFTs are also optimized to maximise the performance of the AM-QLEDs-the inner shell composition of quantum dots and carrier type of TFTs-resulting in a maximum external quantum efficiency and operational lifetime (at an initial luminance of 100 cd m2 ) of 21.2% and 38 100 000 h for the C-QLED, and 19.1% and 133100000 h for the I-QLED, respectively. Finally, a 5×5 AM-QLED display array controlled using SWNT TFTs is successfully demonstrated. This study is expected to contribute to the development of advanced AM-QLED displays.
RESUMEN
With the surge in perovskite research, practical features for future applications are desired to be secured, but the reliability of the materials and the use of hazardous Pb are longstanding problems. Here, an air-stable Cs2 SnI6 (CSI) is prepared via diluted hydriodic acid solvent-based precursor optimization during scalable hydrothermal growth. Materials characterization is performed using various elemental peak analyses and crystallographic identification. The resulting CSI exhibits long-term operating stability over 6 months, i) at elevated temperatures, ii) in ambient air, and iii) under light illumination from UV to near-infrared. More importantly, to demonstrate an intriguing class of applications up to system level, physically detachable CSI photodetector arrays (PD-arrays), integrated with micro-light-emitting-diodes (µ-LEDs) arrays, are successfully fabricated. In addition, 3 × 3 flexible CSI PDs are fully operational, even in air, and their spatial uniformity in pixels is quantitatively evaluated. The charge-transport mechanisms of the CSI PDs under light and elevated temperature are assessed via temperature-dependent characterization from 148 to 373 K, implying the involvement of 3D variable-range hopping. Multicycle evaluation of the CSI PD-arrays confirms their operational stability in AC and DC modes, demonstrating this platform's potential benefit for wireless optical interconnection in advanced Si technology.
RESUMEN
Animal telemetry has been recognized as a core platform for exploring animal species due to future opportunities in terms of its contribution toward marine fisheries and living resources. Herein, biologging systems with pressure sensors are successfully implemented via open-source hardware platforms, followed by immediate application to captive harbor seals (HS). Remotely captured output voltage signals in real-time mode via Bluetooth communication were reproducibly and reliably recorded on the basis of hours using a smartphone built with data capturing software with graphic user interface (GUI). Output voltages, corresponding to typical behaviors on the captive HS, such as stopping (A), rolling (B), flapping (C), and sliding (D), are clearly obtained, and their analytical interpretation on captured electrical signals are fully validated via a comparison study with consecutively captured images for each motion of the HS. Thus, the biologging system with low cost and light weight, which is fully compatible with a conventional smartphone, is expected to potentially contribute toward future anthology of seal animals.
RESUMEN
Photodetectors and display backplane transistors based on molybdenum disulfide (MoS2) have been regarded as promising topics. However, most studies have focused on the improvement in the performances of the MoS2 photodetector itself or emerging applications. In this study, to suggest a better insight into the photodetector performances of MoS2 thin film transistors (TFTs), as photosensors for possible integrated system, we performed a comparative study on the photoresponse of MoS2 and hydrogenated amorphous silicon (a-Si:H) TFTs. As a result, in the various wavelengths and optical power ranges, MoS2 TFTs exhibit 2~4 orders larger photo responsivities and detectivities. The overall quantitative comparison of photoresponse in single device and inverters confirms a much better performance by the MoS2 photodetectors. Furthermore, as a strategy to improve the field effect mobility and photoresponse of the MoS2 TFTs, molecular doping via poly-L-lysine (PLL) treatment was applied to the MoS2 TFTs. Transfer and output characteristics of the MoS2 TFTs clearly show improved photocurrent generation under a wide range of illuminations (740~365 nm). These results provide useful insights for considering MoS2 as a next-generation photodetector in flat panel displays and makes it more attractive due to the fact of its potential as a high-performance photodetector enabled by a novel doping technique.
RESUMEN
Channel shape dependency on device instability for amorphous indium-gallium-zinc oxide (a-IGZO) thin film transistors (TFTs) is investigated by using various channel shape devices along with systematic electrical characterization including DC I-V characeristics and bias temperature stress tests. a-IGZO TFTs with various channel shapes such as zigzag, circular, and U-type channels are implemented and their vertical and lateral electric field stress (E-field) effects are systematically tested and analyzed by using an experimental and modeling study. Source and drain (S/D) electrode asymmetry and vertical E-field effects on device instability are neglibible, whereas the lateral E-field effects significantly affect device instability, particularly for zigzag channel shape, compared to circular and U-type TFTs. Moreover, charge trapping time (τ) for zigzag-type a-IGZO TFTs is extracted as 3.8 × 104, which is at least three-times smaller than those of other channel-type a-IGZO TFTs, hinting that local E-field enhancement can critically affect the device reliability. The Technology Computer Aided Design (TCAD) simulation results reveal the locally enhanced E-field at both corner region in the channel in a quantitative mode and its correlation with hemisphere radius (ρ) values.