Antarctic Polyester Hydrolases Degrade Aliphatic and Aromatic Polyesters at Moderate Temperatures.

Polyethylene terephthalate (PET) is one of the most widely used synthetic plastics in the packaging industry, and consequently has become one of the main components of plastic waste found in the environment. However, several microorganisms have been described to encode enzymes that catalyze the depolymerization of PET. While most known PET hydrolases are thermophilic and require reaction temperatures between 60°C and 70°C for an efficient hydrolysis of PET, a partial hydrolysis of amorphous PET at lower temperatures by the polyester hydrolase IsPETase from the mesophilic bacterium Ideonella sakaiensis has also been reported. We show that polyester hydrolases from the Antarctic bacteria Moraxella sp. strain TA144 (Mors1) and Oleispira antarctica RB-8 (OaCut) were able to hydrolyze the aliphatic polyester polycaprolactone as well as the aromatic polyester PET at a reaction temperature of 25°C. Mors1 caused a weight loss of amorphous PET films and thus constitutes a PET-degrading psychrophilic enzyme. Comparative modeling of Mors1 showed that the amino acid composition of its active site resembled both thermophilic and mesophilic PET hydrolases. Lastly, bioinformatic analysis of Antarctic metagenomic samples demonstrated that members of the Moraxellaceae family carry candidate genes coding for further potential psychrophilic PET hydrolases. IMPORTANCE A myriad of consumer products contains polyethylene terephthalate (PET), a plastic that has accumulated as waste in the environment due to its long-term stability and poor waste management. One promising solution is the enzymatic biodegradation of PET, with most known enzymes only catalyzing this process at high temperatures. Here, we bioinformatically identified and biochemically characterized an enzyme from an Antarctic organism that degrades PET at 25°C with similar efficiency to the few PET-degrading enzymes active at moderate temperatures. Reasoning that Antarctica harbors other PET-degrading enzymes, we analyzed available data from Antarctic metagenomic samples and successfully identified other potential enzymes. Our findings contribute to increasing the repertoire of known PET-degrading enzymes that are currently being considered as biocatalysts for the biological recycling of plastic waste.

Large-Ring Cyclodextrins as Chiral Selectors for Enantiomeric Pharmaceuticals.

Large-ring cyclodextrins (CD) are cyclic glucans composed of 9 or more α-1,4-linked glucose units. They are minor side products of bacterial glucanotransferases (CGTases, EC 2.4.1.19) and have previously been available only in very small amounts for studies of their properties in supramolecular complex formation reactions. We engineered a CGTase to synthesize mainly large-ring CD facilitating their preparation in larger amounts. By reversed phase chromatography, we obtained single CD samples composed of 10 to 12 glucose units (CD10, CD11, and CD12) with a purity of >90 %. Their identity was confirmed by high resolution mass spectrometry and fragmentation analysis. We demonstrated the non-toxicity of CD10-CD12 for human cell lines by a cell proliferation assay and impedimetric monitoring. We then showed that CD10 and CD11 are efficient chiral selectors for the capillary electrophoretic separation of the enantiomeric pharmaceuticals fluvastatin, mefloquine, carvedilol, and primaquine.

Efficient extracellular recombinant production and purification of a Bacillus cyclodextrin glucanotransferase in Escherichia coli.

BACKGROUND: Cyclodextrin glucanotransferases (CGTases) catalyze the synthesis of cyclodextrins, cyclic oligosaccharides composed of glucose monomers that find applications in the pharmaceutical, food, and cosmetic industries. An economic application of these industrially important enzymes requires their efficient production and recovery. In this study, the effect of Sec-type signal peptides on the recombinant expression of a CGTase derived from Bacillus sp. G825-6 was investigated in Escherichia coli BL21(DE3) using a codon-adapted gene. In addition, a novel purification method for the CGTase using starch adsorption was developed. RESULTS: Expression vectors encoding N-terminal PelB, DacD, and the native Bacillus sp. G825-6 CGTase signal peptides (SP) were constructed for the recombinant CGTase. With the DacD SP derived from E. coli, a 3.9- and 3.1-fold increase in total enzyme activity was obtained compared to using the PelB and the native CGTase SP, respectively. DacD enabled a 7.3-fold increase of activity in the extracellular fraction after induction for 24 h compared to the native CGTase SP. After induction for 48 h, 75% of the total activity was detected in the extracellular fraction. By a batch wise adsorption to starch, the extracellular produced CGTase could be purified to homogeneity with a yield of 46.5% and a specific activity of 1637 U/mg. CONCLUSIONS: The signal peptide DacD promoted the high-level heterologous extracellular expression of a recombinant CGTase from Bacillus sp. G825-6 with a pET20b(+) vector in E. coli BL21(DE3). A protocol based on starch adsorption enabled a fast and efficient purification of the recombinant enzyme.

The effect of host size on binding in host-guest complexes of cyclodextrins and polyoxometalates.

Harnessing flexible host cavities opens opportunities for the design of novel supramolecular architectures that accommodate nanosized guests. This research examines unprecedented gas-phase structures of Keggin-type polyoxometalate PW12O40 3- (WPOM) and cyclodextrins (X-CD, X = α, ß, γ, δ, ε, ζ) including previously unexplored large, flexible CDs. Using ion mobility spectrometry coupled to mass spectrometry (IM-MS) in conjunction with molecular dynamics (MD) simulations, we provide first insights into the binding modes between WPOM and larger CD hosts as isolated structures. Notably, γ-CD forms two distinct structures with WPOM through binding to its primary and secondary faces. We also demonstrate that ε-CD forms a deep inclusion complex, which encapsulates WPOM within its annular inner cavity. In contrast, ζ-CD adopts a saddle-like conformation in its complex with WPOM, which resembles its free form in solution. More intriguingly, the gas-phase CD-WPOM structures are highly correlated with their counterparts in solution as characterized by nuclear magnetic resonance (NMR) spectroscopy. The strong correlation between the gas- and solution phase structures of CD-WPOM complexes highlight the power of gas-phase IM-MS for the structural characterization of supramolecular complexes with nanosized guests, which may be difficult to examine using conventional approaches.

Ion mobility mass spectrometry enables the discrimination of positional isomers and the detection of conformers from cyclic oligosaccharides-metals supramolecular complexes.

Cyclic oligosaccharides are well known to interact with various metals, able to form supramolecular complexes with distinct sizes and shapes. However, the presence of various isomers in a sample, including positional isomers and conformers, can significantly impact molecular recognition, encapsulation ability and chemical reactivity. Therefore, it is crucial to have tools for deep samples probing and correlation establishments. The emerging ion mobility mass spectrometry (IM-MS) has the advantages to be rapid and sensitive, but is still in its infancy for the investigation of supramolecular assemblies. In the herein study, it was demonstrated that IM-MS is suitable to discriminate several isomers of cyclodextrins (CD)-metals complexes, used as cyclic oligosaccharide models. In this sense, we investigated branched 6-O-α-glucosyl- or 6-O-α-maltosyl-ß-cyclodextrins (G1-ß-CD and G2-ß-CD) and their purely cyclic isomers: CD8 (γ-CD) and CD9 (δ-CD). The corresponding collision cross section (CCS) values were deducted for the main positive singly and doubly charged species. Experimental CCS values were matched with models obtained from molecular modelling. The high mobility resolving power and resolution enabled discrimination of positional isomers, identification of various conformers and accurate relative content estimation. These results represent a milestone in the identification of carbohydrate conformers that cannot be easily reached by other approaches.

Structure and function of the metagenomic plastic-degrading polyester hydrolase PHL7 bound to its product.

The recently discovered metagenomic-derived polyester hydrolase PHL7 is able to efficiently degrade amorphous polyethylene terephthalate (PET) in post-consumer plastic waste. We present the cocrystal structure of this hydrolase with its hydrolysis product terephthalic acid and elucidate the influence of 17 single mutations on the PET-hydrolytic activity and thermal stability of PHL7. The substrate-binding mode of terephthalic acid is similar to that of the thermophilic polyester hydrolase LCC and deviates from the mesophilic IsPETase. The subsite I modifications L93F and Q95Y, derived from LCC, increased the thermal stability, while exchange of H185S, derived from IsPETase, reduced the stability of PHL7. The subsite II residue H130 is suggested to represent an adaptation for high thermal stability, whereas L210 emerged as the main contributor to the observed high PET-hydrolytic activity. Variant L210T showed significantly higher activity, achieving a degradation rate of 20 µm h-1 with amorphous PET films.

Engineering the catalytic activity of an Antarctic PET-degrading enzyme by loop exchange.

Several hydrolases have been described to degrade polyethylene terephthalate (PET) at moderate temperatures ranging from 25°C to 40°C. These mesophilic PET hydrolases (PETases) are less efficient in degrading this plastic polymer than their thermophilic homologs and have, therefore, been the subject of many protein engineering campaigns. However, enhancing their enzymatic activity through rational design or directed evolution poses a formidable challenge due to the need for exploring a large number of mutations. Additionally, evaluating the improvements in both activity and stability requires screening numerous variants, either individually or using high-throughput screening methods. Here, we utilize instead the design of chimeras as a protein engineering strategy to increase the activity and stability of Mors1, an Antarctic PETase active at 25°C. First, we obtained the crystal structure of Mors1 at 1.6 Å resolution, which we used as a scaffold for structure- and sequence-based chimeric design. Then, we designed a Mors1 chimera via loop exchange of a highly divergent active site loop from the thermophilic leaf-branch compost cutinase (LCC) into the equivalent region in Mors1. After restitution of an active site disulfide bond into this chimera, the enzyme exhibited a shift in optimal temperature for activity to 45°C and an increase in fivefold in PET hydrolysis when compared with wild-type Mors1 at 25°C. Our results serve as a proof of concept of the utility of chimeric design to further improve the activity and stability of PETases active at moderate temperatures.

Low Carbon Footprint Recycling of Post-Consumer PET Plastic with a Metagenomic Polyester Hydrolase.

Earth is flooded with plastics and the need for sustainable recycling strategies for polymers has become increasingly urgent. Enzyme-based hydrolysis of post-consumer plastic is an emerging strategy for closed-loop recycling of polyethylene terephthalate (PET). The polyester hydrolase PHL7, isolated from a compost metagenome, completely hydrolyzes amorphous PET films, releasing 91 mg of terephthalic acid per hour and mg of enzyme. Vertical scanning interferometry shows degradation rates of the PET film of 6.8 µm h-1 . Structural analysis indicates the importance of leucine at position 210 for the extraordinarily high PET-hydrolyzing activity of PHL7. Within 24 h, 0.6 mgenzyme gPET -1 completely degrades post-consumer thermoform PET packaging in an aqueous buffer at 70 °C without any energy-intensive pretreatments. Terephthalic acid recovered from the enzymatic hydrolysate is then used to synthesize virgin PET, demonstrating the potential of polyester hydrolases as catalysts in sustainable PET recycling processes with a low carbon footprint.

Domain shuffling of cyclodextrin glucanotransferases for tailored product specificity and thermal stability.

Cyclodextrin glucanotransferases (CGTases) convert α-1,4-glucans to cyclic oligosaccharides (cyclodextrins, CD), which have found applications in the food and the pharmaceutical industries. In this study, we used two CGTases with different cyclization activities, product specificities, and pH and temperature optima to construct chimeric variants for the synthesis of large-ring CD. We used (a) a synthetic thermostable CGTase mainly forming α- and ß-CD (CD6 and CD7) derived from Geobacillus stearothermophilus ET1/NO2 (GeoT), and (b) a CGTase with lower cyclization activity from the alkaliphilic Bacillus sp. G825-6, which mainly synthesizes γ-CD (CD8). The A1, B, A2, and CDE domains of the G825-6 CGTase were replaced with corresponding GeoT CGTase domains by utilizing a megaprimer cloning approach. A comparison of the optimum temperature and pH, thermal stability, and CD products synthesized by the variants revealed that the B domain had a major impact on the cyclization activity, thermal stability, and product specificity of the constructed chimera. Complete suppression of the synthesis of CD6 was observed with the variants GeoT-A1/B and GeoT-A1/A2/CDE. The variant GeoT-A1/A2/CDE showed the desired enzyme properties for large-ring CD synthesis. Its melting temperature was 9 °C higher compared to the G825-6 CGTase and it synthesized up to 3.3 g·L-1 CD9 to CD12, corresponding to a 1.8- and 2.3-fold increase compared to GeoT and G825-6 CGTase, respectively. In conclusion, GeoT-A1/A2/CDE may be a candidate for the further development of CGTases specifically forming larger CD.

Engineered cyclodextrin glucanotransferases from Bacillus sp. G-825-6 produce large-ring cyclodextrins with high specificity.

Cyclodextrin glucanotransferases (CGTases) synthesize cyclic oligosaccharides (cyclodextrins, CD) from starch. A CGTase from Bacillus sp. G-825-6 was engineered by site-directed mutagenesis at two positions by the construction of the variants Y183W, Y183R, D358R, Y183W/D358R, and Y183R/D358R. Among CD composed of 7-12 glucose units (CD7-CD12), Y183W mainly produced CD8. Y183R had completely lost its ability to synthesize CD7, and CD8 and the larger CD were the only cyclic oligosaccharides produced. D358R also formed mainly CD8-CD12 during a reaction time of 24 hr. The double mutant Y183W/D358R showed combined characteristics of the single mutations with very low CD7 cyclization activity and an increased formation of the larger CD. The results show that CGTases synthesizing mainly CD8-CD12 can be constructed allowing a convenient production of larger CD in significant amounts as host molecules in supramolecular complexing reactions.

Stepwise error-prone PCR and DNA shuffling changed the pH activity range and product specificity of the cyclodextrin glucanotransferase from an alkaliphilic Bacillus sp.

Cyclodextrin glucanotransferase (EC 2.4.1.19) from the alkaliphilic Bacillus sp. G-825-6 converts starch mainly to γ-cyclodextrin (CD8). A combination of error-prone PCR and DNA shuffling was used to obtain variants of this enzyme with higher product specificity for CD8 and a broad pH activity range. The variant S54 with seven amino acid substitutions showed a 1.2-fold increase in CD8-synthesizing activity and the product ratio of CD7:CD8 was shifted to 1:7 compared to 1:3 of the wild-type enzyme. Nine amino acid substitutions of the cyclodextrin glucanotransferase were performed to generate the variant S35 active in a pH range 4.0-10.0. Compared to the wild-type enzyme which is inactive below pH 6.0, S35 retained 70% of its CD8-synthesizing activity at pH 4.0.