Design, synthesis, and characterization of protein origami based on self-assembly of a brick and staple artificial protein pair.

A versatile strategy to create an inducible protein assembly with predefined geometry is demonstrated. The assembly is triggered by a binding protein that staples two identical protein bricks together in a predictable spatial conformation. The brick and staple proteins are designed for mutual directional affinity and engineered by directed evolution from a synthetic modular repeat protein library. As a proof of concept, this article reports on the spontaneous, extremely fast and quantitative self-assembly of two designed alpha-repeat (αRep) brick and staple proteins into macroscopic tubular superhelices at room temperature. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM with staining agent and cryoTEM) elucidate the resulting superhelical arrangement that precisely matches the a priori intended 3D assembly. The highly ordered, macroscopic biomolecular construction sustains temperatures as high as 75 °C thanks to the robust αRep building blocks. Since the α-helices of the brick and staple proteins are highly programmable, their design allows encoding the geometry and chemical surfaces of the final supramolecular protein architecture. This work opens routes toward the design and fabrication of multiscale protein origami with arbitrarily programmed shapes and chemical functions.

Biosynthetic proteins targeting the SARS-CoV-2 spike as anti-virals.

The binding of the SARS-CoV-2 spike to angiotensin-converting enzyme 2 (ACE2) promotes virus entry into the cell. Targeting this interaction represents a promising strategy to generate antivirals. By screening a phage-display library of biosynthetic protein sequences build on a rigid alpha-helicoidal HEAT-like scaffold (named αReps), we selected candidates recognizing the spike receptor binding domain (RBD). Two of them (F9 and C2) bind the RBD with affinities in the nM range, displaying neutralisation activity in vitro and recognizing distinct sites, F9 overlapping the ACE2 binding motif. The F9-C2 fusion protein and a trivalent αRep form (C2-foldon) display 0.1 nM affinities and EC50 of 8-18 nM for neutralization of SARS-CoV-2. In hamsters, F9-C2 instillation in the nasal cavity before or during infections effectively reduced the replication of a SARS-CoV-2 strain harbouring the D614G mutation in the nasal epithelium. Furthermore, F9-C2 and/or C2-foldon effectively neutralized SARS-CoV-2 variants (including delta and omicron variants) with EC50 values ranging from 13 to 32 nM. With their high stability and their high potency against SARS-CoV-2 variants, αReps provide a promising tool for SARS-CoV-2 therapeutics to target the nasal cavity and mitigate virus dissemination in the proximal environment.

Engineering of brick and staple components for ordered assembly of synthetic repeat proteins.

Synthetic ɑRep repeat proteins are engineered as Brick and Staple protein pairs that together self-assemble into helical filaments. In most cases, the filaments spontaneously form supercrystals. Here, we describe an expanded series of ɑRep Bricks designed to stabilize the interaction between consecutive Bricks, to control the length of the assembled multimers, or to alter the spatial distribution of the Staple on the filaments. The effects of these Brick modifications on the assembly, on the final filament structure and on the crystal symmetry are analyzed by biochemical methods, electron microscopy and small angle X-ray scattering. We further extend the concept of Brick/Staple protein origami by designing a new type of "Janus"-like Brick protein that is equally assembled by orthogonal staples binding its inner or outer surfaces and thus ending inside or outside the filaments. The relative roles of longitudinal and lateral associations in the assembly process are discussed. This set of results demonstrates important proofs-of-principle for engineering these remarkably versatile proteins toward nanometer-to-micron scale constructions.

Insight into microtubule nucleation from tubulin-capping proteins.

Nucleation is one of the least understood steps of microtubule dynamics. It is a kinetically unfavorable process that is templated in the cell by the γ-tubulin ring complex or by preexisting microtubules; it also occurs in vitro from pure tubulin. Here we study the nucleation inhibition potency of natural or artificial proteins in connection with their binding mode to the longitudinal surface of α- or ß-tubulin. The structure of tubulin-bound CopN, a Chlamydia protein that delays nucleation, suggests that this protein may interfere with two protofilaments at the (+) end of a nucleus. Designed ankyrin repeat proteins that share a binding mode similar to that of CopN also impede nucleation, whereas those that target only one protofilament do not. In addition, an αRep protein predicted to target two protofilaments at the (-) end does not delay nucleation, pointing to different behaviors at both ends of the nucleus. Our results link the interference with protofilaments at the (+) end and the inhibition of nucleation.

An Artificial Hemoprotein with Inducible Peroxidase- and Monooxygenase-Like Activities.

A novel inducible artificial metalloenzyme obtained by covalent attachment of a manganese(III)-tetraphenylporphyrin (MnTPP) to the artificial bidomain repeat protein, (A3A3')Y26C, is reported. The protein is part of the αRep family. The biohybrid was fully characterized by MALDI-ToF mass spectrometry, circular dichroism and UV/Vis spectroscopies. The peroxidase and monooxygenase activities were evaluated on the original and modified scaffolds including those that have a) an additional imidazole, b) a specific αRep bA3-2 that is known to induce the opening of the (A3A3') interdomain region and c) a derivative of the αRep bA3-2 inducer extended with a His6 -Tag (His6 -bA3-2). Catalytic profiles are highly dependent on the presence of co-catalysts with the best activity obtained with His6 -bA3-2. The entire mechanism was rationalized by an integrative molecular modeling study that includes protein-ligand docking and large-scale molecular dynamics. This constitutes the first example of an entirely artificial metalloenzyme with inducible peroxidase and monooxygenase activities, reminiscent of allosteric regulation of natural enzymatic pathways.

Alpha repeat proteins (αRep) as expression and crystallization helpers.

We have previously described a highly diverse library of artificial repeat proteins based on thermostable HEAT-like repeats, named αRep. αReps binding specifically to proteins difficult to crystallize have been selected and in several examples, they made possible the crystallization of these proteins. To further simplify the production and crystallization experiments we have explored the production of chimeric proteins corresponding to covalent association between the targets and their specific binders strengthened by a linker. Although chimeric proteins with expression partners are classically used to enhance expression, these fusions cannot usually be used for crystallization. With specific expression partners like a cognate αRep this is no longer true, and chimeric proteins can be expressed purified and crystallized. αRep selection by phage display suppose that at least a small amount of the target protein should be produced to be used as a bait for selection and this might, in some cases, be difficult. We have therefore transferred the αRep library in a new construction adapted to selection by protein complementation assay (PCA). This new procedure allows to select specific binders by direct interaction with the target in the cytoplasm of the bacteria and consequently does not require preliminary purification of target protein. αRep binders selected by PCA or by phage display can be used to enhance expression, stability, solubility and crystallogenesis of proteins that are otherwise difficult to express, purify and/or crystallize.

The unexpected structure of the designed protein Octarellin V.1 forms a challenge for protein structure prediction tools.

Despite impressive successes in protein design, designing a well-folded protein of more 100 amino acids de novo remains a formidable challenge. Exploiting the promising biophysical features of the artificial protein Octarellin V, we improved this protein by directed evolution, thus creating a more stable and soluble protein: Octarellin V.1. Next, we obtained crystals of Octarellin V.1 in complex with crystallization chaperons and determined the tertiary structure. The experimental structure of Octarellin V.1 differs from its in silico design: the (αßα) sandwich architecture bears some resemblance to a Rossman-like fold instead of the intended TIM-barrel fold. This surprising result gave us a unique and attractive opportunity to test the state of the art in protein structure prediction, using this artificial protein free of any natural selection. We tested 13 automated webservers for protein structure prediction and found none of them to predict the actual structure. More than 50% of them predicted a TIM-barrel fold, i.e. the structure we set out to design more than 10years ago. In addition, local software runs that are human operated can sample a structure similar to the experimental one but fail in selecting it, suggesting that the scoring and ranking functions should be improved. We propose that artificial proteins could be used as tools to test the accuracy of protein structure prediction algorithms, because their lack of evolutionary pressure and unique sequences features.

The αRep artificial repeat protein scaffold: a new tool for crystallization and live cell applications.

We have designed a new family of artificial proteins, named αRep, based on HEAT (acronym for Huntingtin, elongation factor 3 (EF3), protein pphosphatase 2A (PP2A), yeast kinase Tor1) repeat proteins containing an α-helical repeated motif. The sequence of the repeated motifs, first identified in a thermostable archae protein was optimized using a consensus design strategy and used for the construction of a library of artificial proteins. All proteins from this library share the same general fold but differ both in the number of repeats and in five highly randomized amino acid positions within each repeat. The randomized side chains altogether provide a hypervariable surface on αRep variants. Sequences from this library are efficiently expressed as soluble, folded and very stable proteins. αRep binders with high affinity for various protein targets were selected by phage display. Low micromolar to nanomolar dissociation constants between partners were measured and the structures of several complexes (specific αRep/protein target) were solved by X-ray crystallography. Using GFP as a model target, it was demonstrated that αReps can be used as bait in pull-down experiments. αReps can be expressed in eukaryotic cells and specifically interact with their target addressed to different cell compartments.

Amphipol-mediated screening of molecular orthoses specific for membrane protein targets.

Specific, tight-binding protein partners are valuable helpers to facilitate membrane protein (MP) crystallization, because they can i) stabilize the protein, ii) reduce its conformational heterogeneity, and iii) increase the polar surface from which well-ordered crystals can grow. The design and production of a new family of synthetic scaffolds (dubbed αReps, for "artificial alpha repeat protein") have been recently described. The stabilization and immobilization of MPs in a functional state are an absolute prerequisite for the screening of binders that recognize specifically their native conformation. We present here a general procedure for the selection of αReps specific of any MP. It relies on the use of biotinylated amphipols, which act as a universal "Velcro" to stabilize, and immobilize MP targets onto streptavidin-coated solid supports, thus doing away with the need to tag the protein itself.

Antiviral activity of recombinant ankyrin targeted to the capsid domain of HIV-1 Gag polyprotein.

BACKGROUND: Ankyrins are cellular mediators of a number of essential protein-protein interactions. Unlike intrabodies, ankyrins are composed of highly structured repeat modules characterized by disulfide bridge-independent folding. Artificial ankyrin molecules, designed to target viral components, might act as intracellular antiviral agents and contribute to the cellular immunity against viral pathogens such as HIV-1. RESULTS: A phage-displayed library of artificial ankyrins was constructed, and screened on a polyprotein made of the fused matrix and capsid domains (MA-CA) of the HIV-1 Gag precursor. An ankyrin with three modules named Ank(GAG)1D4 (16.5 kDa) was isolated. Ank(GAG)1D4 and MA-CA formed a protein complex with a stoichiometry of 1:1 and a dissociation constant of K(d) ~ 1 µM, and the Ank(GAG)1D4 binding site was mapped to the N-terminal domain of the CA, within residues 1-110. HIV-1 production in SupT1 cells stably expressing Ank(GAG)1D4 in both N-myristoylated and non-N-myristoylated versions was significantly reduced compared to control cells. Ank(GAG)1D4 expression also reduced the production of MLV, a phylogenetically distant retrovirus. The Ank(GAG)1D4-mediated antiviral effect on HIV-1 was found to occur at post-integration steps, but did not involve the Gag precursor processing or cellular trafficking. Our data suggested that the lower HIV-1 progeny yields resulted from the negative interference of Ank(GAG)1D4-CA with the Gag assembly and budding pathway. CONCLUSIONS: The resistance of Ank(GAG)1D4-expressing cells to HIV-1 suggested that the CA-targeted ankyrin Ank(GAG)1D4 could serve as a protein platform for the design of a novel class of intracellular inhibitors of HIV-1 assembly based on ankyrin-repeat modules.

Analysis of the Escherichia coli glucosamine-6-phosphate synthase activity by isothermal titration calorimetry and differential scanning calorimetry.

Glucosamine-6-phosphate synthase (GlmS) is responsible for the first and rate-limiting step in the hexosamine biosynthetic pathway. It catalyzes the conversion of D-fructose-6P (F6P) into D-glucosamine-6P (GlcN6P) using L-glutamine (Gln) as nitrogen donor (synthase activity) according to an ordered bi-bi process where F6P binds first. In the absence of F6P, the enzyme exhibits a weak hydrolyzing activity of Gln into Glu and ammonia (glutaminase activity), whereas the presence of F6P strongly stimulates it (hemi-synthase activity). Until now, these different activities were indirectly measured using either coupled enzyme or colorimetric methods. In this work, we have developed a direct assay monitoring the heat released by the reaction. Isothermal titration calorimetry and differential scanning calorimetry were used to determine kinetic and thermodynamic parameters of GlmS. The direct determination at 37 degrees C of kinetic parameters and affinity constants for both F6P and Gln demonstrated that part of the ammonia produced by Gln hydrolysis in the presence of both substrates is not used for the formation of the GlcN6P. The full characterization of this phenomenon allowed to identify experimental conditions where this leak of ammonia is negligible. Enthalpy measurements at 25 degrees C in buffers of various heats of protonation demonstrated that no proton exchange with the medium occurred during the enzyme-catalyzed glutaminase or synthase reaction suggesting for the first time that both products are released as a globally neutral pair composed by the Glu carboxylic side chain and the GlcN6P amine function. Finally we showed that the oligomerization state of GlmS is concentration-dependent.

Picomolar Biosensing and Conformational Analysis Using Artificial Bidomain Proteins and Terbium-to-Quantum Dot Förster Resonance Energy Transfer.

Although antibodies remain a primary recognition element in all forms of biosensing, functional limitations arising from their size, stability, and structure have motivated the development and production of many different artificial scaffold proteins for biological recognition. However, implementing such artificial binders into functional high-performance biosensors remains a challenging task. Here, we present the design and application of Förster resonance energy transfer (FRET) nanoprobes comprising small artificial proteins (αRep bidomains) labeled with a Tb complex (Tb) donor on the C-terminus and a semiconductor quantum dot (QD) acceptor on the N-terminus. Specific binding of one or two protein targets to the αReps induced a conformational change that could be detected by time-resolved Tb-to-QD FRET. These single-probe FRET switches were used in a separation-free solution-phase assay to quantify different protein targets at sub-nanomolar concentrations and to measure the conformational changes with sub-nanometer resolution. Probing ligand-receptor binding under physiological conditions at very low concentrations in solution is a special feature of FRET that can be efficiently combined with other structural characterization methods to develop, understand, and optimize artificial biosensors. Our results suggest that the αRep FRET nanoprobes have a strong potential for their application in advanced diagnostics and intracellular live-cell imaging of ligand-receptor interactions.

Disulfide bond substitution by directed evolution in an engineered binding protein.

Breaking ties: The antitumour protein, neocarzinostatin (NCS), is one of the few drug-carrying proteins used in human therapeutics. However, the presence of disulfide bonds limits this protein's potential development for many applications. This study describes a generic directed-evolution approach starting from NCS-3.24 (shown in the figure complexed with two testosterone molecules) to engineer stable disulfide-free NCS variants suitable for a variety of purposes, including intracellular applications.The chromoprotein neocarzinostatin (NCS) has been intensively studied for its antitumour properties. It has recently been redesigned as a potential drug-carrying scaffold. A potential limit of this protein scaffold, especially for intracellular applications, is the presence of disulfide bonds. The objective of this work was to create a disulfide-free NCS-derived scaffold. A generic targeted approach was developed by using directed evolution methods. As a starting point we used a previously engineered NCS variant in which a hapten binding site had been created. A library was then generated in which cysteine Cys88 and Cys93 and neighbouring residues were randomly substituted. Variants that preserved the hapten binding function were selected by phage display and further screened by colony filtration methods. Several sequences with common features emerged from this process. The corresponding proteins were expressed, purified and their biophysical properties characterised. How these selected sequences rescued folding ability and stability of the disulfide-free protein was carefully examined by using calorimetry and the results were interpreted with molecular simulation techniques.

Directed evolution of artificial repeat proteins as habit modifiers for the morphosynthesis of (111)-terminated gold nanocrystals.

Natural biocomposites are shaped by proteins that have evolved to interact with inorganic materials. Protein directed evolution methods which mimic Darwinian evolution have proven highly successful to generate improved enzymes or therapeutic antibodies but have rarely been used to evolve protein-material interactions. Indeed, most reported studies have focused on short peptides and a wide range of oligopeptides with chemical binding affinity for inorganic materials have been uncovered by phage display methods. However, their small size and flexible unfolded structure prevent them from dictating the shape and crystallinity of the growing material. In the present work, a specific set of artificial repeat proteins (αRep), which exhibit highly stable 3D folding with a well-defined hypervariable interacting surface, is selected by directed evolution of a very efficient home-built protein library for their high and selective affinity for the Au(111) surface. The proteins are built from the extendable concatenation of self-compatible repeated motifs idealized from natural HEAT proteins. The high-yield synthesis of Au(111)-faceted nanostructures mediated by these αRep proteins demonstrates their chemical affinity and structural selectivity that endow them with high crystal habit modification performances. Importantly, we further exploit the protein shell spontaneously assembled on the nanocrystal facets to drive protein-mediated colloidal self-assembly and on-surface enzymatic catalysis. Our method constitutes a generic tool for producing nanocrystals with determined faceting, superior biocompatibility and versatile bio-functionalization towards plasmon-based devices and (bio)molecular sensors.

Selection and Characterization of Artificial Proteins Targeting the Tubulin α Subunit.

Microtubules are cytoskeletal filaments of eukaryotic cells made of αß-tubulin heterodimers. Structural studies of non-microtubular tubulin rely mainly on molecules that prevent its self-assembly and are used as crystallization chaperones. Here we identified artificial proteins from an αRep library that are specific to α-tubulin. Turbidity experiments indicate that these αReps impede microtubule assembly in a dose-dependent manner and total internal reflection fluorescence microscopy further shows that they specifically block growth at the microtubule (-) end. Structural data indicate that they do so by targeting the α-tubulin longitudinal surface. Interestingly, in one of the complexes studied, the α subunit is in a conformation that is intermediate between the ones most commonly observed in X-ray structures of tubulin and those seen in the microtubule, emphasizing the plasticity of tubulin. These α-tubulin-specific αReps broaden the range of tools available for the mechanistic study of microtubule dynamics and its regulation.

Ligand-induced conformational switch in an artificial bidomain protein scaffold.

Artificial proteins binding any predefined "target" protein can now be efficiently generated using combinatorial libraries based on robust protein scaffolds. αRep is such a family of artificial proteins, based on an α-solenoid protein repeat scaffold. The low aggregation propensity of the specific "binders" generated from this library opens new protein engineering opportunities such as the creation of biosensors within multidomain constructions. Here, we have explored the properties of two new types of artificial bidomain proteins based on αRep structures. Their structural and functional properties are characterized in detail using biophysical methods. The results clearly show that both bidomain proteins adopt a closed bivalve shell-like conformation, in the ligand free form. However, the presence of ligands induces a conformational transition, and the proteins adopt an open form in which each domain can bind its cognate protein partner. The open/closed equilibria alter the affinities of each domain and induce new cooperative effects. The binding-induced relative domain motion was monitored by FRET. Crystal structures of the chimeric proteins indicate that the conformation of each constituting domain is conserved but that their mutual interactions explain the emergent properties of these artificial bidomain proteins. The ligand-induced structural transition observed in these bidomain proteins should be transferable to other αRep proteins with different specificity and could provide the basis of a new generic biosensor design.

Structural Analysis of the Hanks-Type Protein Kinase YabT From Bacillus subtilis Provides New Insights in its DNA-Dependent Activation.

YabT is a serine/threonine kinase of the Hanks family from Bacillus subtilis, which lacks the canonical extracellular signal receptor domain but is anchored to the membrane through a C-terminal transmembrane helix. A previous study demonstrated that a basic juxtamembrane region corresponds to a DNA-binding motif essential for the activation of YabT trans-autophosphorylation. YabT is expressed during spore development and localizes to the asymmetric septum where it specifically phosphorylates essential proteins involved in genome maintenance, such as RecA, SsbA, and YabA. YabT has also been shown to phosphorylate proteins involved in protein synthesis, such as AbrB and Ef-Tu, suggesting a possible regulatory role in the progressive metabolic quiescence of the forespore. Finally, cross phosphorylations with other protein kinases implicate YabT in the regulation of numerous other cellular processes. Using an artificial protein scaffold as crystallization helper, we determined the first crystal structure of this DNA-dependent bacterial protein kinase. This allowed us to trap the active conformation of the kinase domain of YabT. Using NMR, we showed that the basic juxtamembrane region of YabT is disordered in the absence of DNA in solution, just like it is in the crystal, and that it is stabilized upon DNA binding. In comparison with its closest structural homolog, the mycobacterial kinase PknB allowed us to discuss the dimerization mode of YabT. Together with phosphorylation assays and DNA-binding experiments, this structural analysis helped us to gain new insights into the regulatory activation mechanism of YabT.

Alpha-helicoidal HEAT-like Repeat Proteins (αRep) Selected as Interactors of HIV-1 Nucleocapsid Negatively Interfere with Viral Genome Packaging and Virus Maturation.

A new generation of artificial proteins, derived from alpha-helicoidal HEAT-like repeat protein scaffolds (αRep), was previously characterized as an effective source of intracellular interfering proteins. In this work, a phage-displayed library of αRep was screened on a region of HIV-1 Gag polyprotein encompassing the C-terminal domain of the capsid, the SP1 linker and the nucleocapsid. This region is known to be essential for the late steps of HIV-1 life cycle, Gag oligomerization, viral genome packaging and the last cleavage step of Gag, leading to mature, infectious virions. Two strong αRep binders were isolated from the screen, αRep4E3 (32 kDa; 7 internal repeats) and αRep9A8 (28 kDa; 6 internal repeats). Their antiviral activity against HIV-1 was evaluated in VLP-producer cells and in human SupT1 cells challenged with HIV-1. Both αRep4E3 and αRep9A8 showed a modest but significant antiviral effects in all bioassays and cell systems tested. They did not prevent the proviral integration reaction, but negatively interfered with late steps of the HIV-1 life cycle: αRep4E3 blocked the viral genome packaging, whereas αRep9A8 altered both virus maturation and genome packaging. Interestingly, SupT1 cells stably expressing αRep9A8 acquired long-term resistance to HIV-1, implying that αRep proteins can act as antiviral restriction-like factors.

Nanoparticles Self-Assembly Driven by High Affinity Repeat Protein Pairing.

Proteins are the most specific yet versatile biological self-assembling agents with a rich chemistry. Nevertheless, the design of new proteins with recognition capacities is still in its infancy and has seldom been exploited for the self-assembly of functional inorganic nanoparticles. Here, we report on the protein-directed assembly of gold nanoparticles using purpose-designed artificial repeat proteins having a rigid but modular 3D architecture. αRep protein pairs are selected for their high mutual affinity from a library of 10(9) variants. Their conjugation onto gold nanoparticles drives the massive colloidal assembly of free-standing, one-particle thick films. When the average number of proteins per nanoparticle is lowered, the extent of self-assembly is limited to oligomeric particle clusters. Finally, we demonstrate that the aggregates are reversibly disassembled by an excess of one free protein. Our approach could be optimized for applications in biosensing, cell targeting, or functional nanomaterials engineering.

Biophysical characterization data of the artificial protein Octarellin V.1 and binding test with its X-ray helpers.

The artificial protein Octarellin V.1 (http://dx.doi.org/10.1016/j.jsb.2016.05.004[1]) was obtained through a direct evolution process over the de novo designed Octarellin V (http://dx.doi.org/10.1016/S0022-2836(02)01206-8[2]). The protein has been characterized by circular dichroism and fluorescence techniques, in order to obtain data related to its thermo and chemical stability. Moreover, the data for the secondary structure content studied by circular dichroism and infra red techniques is reported for the Octarellin V and V.1. Two crystallization helpers, nanobodies (http://dx.doi.org/10.1038/nprot.2014.039[3]) and αRep (http://dx.doi.org/10.1016/j.jmb.2010.09.048[4]), have been used to create stable complexes. Here we present the data obtained of the binding characterization of the Octarellin V.1 with the crystallization helpers by isothermal titration calorimetry.