Ultrasound-Guided Suprazygomatic Maxillary Nerve Block Is Effective in Reducing Postoperative Opioid Use Following Bimaxillary Osteotomy.

BACKGROUND: Ultrasound-guided maxillary nerve block has recently been described, though its impact upon bimaxillary osteotomy has not been formally investigated. PURPOSE: The present study was carried out to determine whether the addition of ultrasound-guided maxillary nerve block in subjects undergoing bimaxillary osteotomy reduces opioid use. STUDY DESIGN, SETTING, SAMPLE: A randomized clinical trial was carried out in adults undergoing bimaxillary osteotomy between April 2019 and January 2020 at Teknon Medical Center (Barcelona, Spain). PREDICTOR VARIABLE: The predictor variable was the treatment technique used (maxillary nerve block or no block). The subjects were randomized to either receive (test group) or not receive (control group) bilateral ultrasound-guided suprazygomatic maxillary nerve block (5 ml of 0.37% ropivacaine) before surgery. MAIN OUTCOME VARIABLE(S): The primary outcome variable was the intravenous methadone requirements in the first two postoperative hours. The secondary outcome variables were postoperative pain, rescue subcutaneous methadone, intravenous remifentanil used intraoperatively, the incidence of postoperative nausea-vomiting, and complications derived from maxillary nerve block. COVARIATES: Subject age, sex, weight, height, and anesthetic risk, and the duration of surgery were recorded. ANALYSES: Descriptive and inferential analyses were performed using the χ2 test and Mann-Whitney U test. Statistical significance was considered for P < .05. RESULTS: The baseline sample consisted of 68 subjects scheduled for bimaxillary osteotomy. The follow-up sample comprised 60 subjects: 30 in the control group (10 females and 20 males, aged 34.0 ± 10.2 years) and 30 in the test group (13 females and 17 males, aged 29.8 ± 10.8 years). The subjects who received maxillary nerve block showed less intravenous methadone use in the first 2 hours postsurgery (median 2.0 mg control group vs 0 mg test group; P < .001), lower pain levels at any time during the first 18 hours postsurgery (median visual analog score 4 control group vs 2 test group; P < .001), and a lesser percentage required methadone (33.3% control group vs 0% test group; P < .01) at 4-18 hours postsurgery. CONCLUSION AND RELEVANCE: The results obtained suggest that ultrasound-guided maxillary nerve block is a promising anesthetic technique capable of reducing intraoperative and postoperative opioid use, with greater patient comfort in bimaxillary osteotomy.

Does Aesthetic Osseous Genioplasty Impact Upper Airway Volume?

BACKGROUND: Although maxillomandibular advancement is the treatment of choice for obstructive sleep apnea syndrome (OSAS) in the presence of underlying maxillomandibular complex hypoplasia, there is still a gap in the literature regarding the impact of genioplasty upon upper airway volume (UAV). OBJECTIVES: The aim of this study was to evaluate the impact of isolated osseous genioplasty upon UAV. METHODS: A retrospective analysis of all patients subjected to isolated osseous genioplasty between July 2015 and July 2022 was conducted. Cone-beam computed tomography was performed preoperatively and postoperatively to assess the chin and hyoid 3-dimensional (3D) spatial position and UAV changes after surgery. RESULTS: A total of 44 patients were included in the study. Regarding surgical movements of the chin, almost all patients received a sagittal movement (n = 42; 39 forward and 3 backward), while in 8 patients a vertical movement (5 upward and 3 downward) was applied, and in 6 patients the chin was centered. Statistically significant increases in total UAV (P = .014) and at the level of the oropharynx (P = .004) were observed. Specifically, chin centering, upward and forward movements enlarged the oropharynx volume (P = .006, .043 and .065, respectively). Chin advancement enlarged the hypopharynx volume (P = .032), as did upward movement of the hyoid bone (P < .001). CONCLUSIONS: Results of the study suggest that aesthetic osseous genioplasty impacts the UAV: each 3D spatial chin movement differently impacts the upper airway by enlarging or narrowing it. However, further studies addressing the apnea-hypopnea index are required to assess its effectiveness in treating OSAS.

What are the Surgical Movements in Orthognathic Surgery That Most Affect the Upper Airways? A Three-Dimensional Analysis.

PURPOSE: Most studies have focused on airway changes after maxillomandibular advancement; however, airway size will change depending on the type, direction, and magnitude of each skeletal movement. The aim of this study was to assess the effect of the maxillary and/or mandibular movements on the pharyngeal airway volume and the minimum cross-sectional area using 3-dimensional cone-beam computed tomography voxel-based superimposition. PATIENTS AND METHODS: The investigators designed and implemented a retrospective cohort study composed of patients with dentofacial deformity subjected to orthognathic surgery. The predictor variables were the surgical movements performed at surgery. The primary outcome variables were the pharyngeal airway volume and minimum cross-sectional area measured preoperatively, at 1- and 12-month follow-up. Skeletal and volumetric relapse and stability were recorded as secondary outcomes at 1 and 12 months, respectively. Descriptive, bivariate and correlation analyses were computed. Significance was set at P < .05. RESULTS: The sample was composed of 103 patients grouped as follows: bimaxillary (53), maxillary (25), or isolated mandible (25). All of the surgical treatments resulted in a significant linear pattern of initial immediate increase of 33.4% (95% confidence interval [CI]: 28.2 to 38.7%; P < .001) in volumetric (nasopharynx [28.7%, CI: 22.7 34.9%; P < .001], oropharynx [36.2%, CI: 29.0 to 43.5%; P < .001], and hypopharynx [31.5%, CI: 25.7 to 37.3%; P < .001]) and minimum cross-sectional area parameters (bimaxillary = 104%, [CI: 87.1 to 122.1%; P < .001], maxillary = 39.5%, [CI: 18.4 to 60.7%; P < .05], and mandible = 65.8%, [CI: 48.1 to 83.6%; P < .05]), followed by a slight downward trend (stabilization) at 12-month follow-up. Airway increase was favored by mandibular advancement (P < .05) and mandibular occlusal plane changes by counterclockwise rotation (P < .05). CONCLUSIONS: The results of this study suggest that there is a favorable effect of orthognathic surgery in the upper airway regardless of the surgical approach, with bimaxillary advancement and mandibular occlusal plane changes by counterclockwise rotation being the most significant contributors.

Jawline Contouring Through an Intraoral Approach in the Context of Bilateral Sagittal Split Osteotomy: A Proof-of-Concept Report.

PURPOSE: This report describes a technique to suspend the submandibular space (SS) through an intraoral approach in the context of a bilateral sagittal split osteotomy (BSSO), thus improving the jawline contour and achieving a neck-rejuvenating effect. PATIENTS AND METHODS: A sample of 6 consecutive patients referred for orthognathic surgery who also sought neck rejuvenation and contouring surgery was selected to implement the technique. The following measurements were used to evaluate the procedure: patient satisfaction with a visual analog scale, photographic assessment, additional operative time, and complications related to the procedure. RESULTS: The average patient age was 47 years (range, 38 to 57 yr). Three patients were women and 3 were men. All patients were highly satisfied with the results achieved at the jawline. No surgical complications occurred in any case. There was an average increase of only 5 minutes in total operative time for each side. CONCLUSION: Suspension of the SS through an intraoral approach is an effective, well-tolerated, and technically straightforward method for neck contouring in patients in whom a BSSO procedure is foreseen.

Semi-Automated Three-Dimensional Condylar Reconstruction.

The objective was to validate a semi-automated segmentation method for 3-dimensional (3D) reconstruction of the mandibular condyle from cone beam computed tomography (CBCT) data and illustrate its application in volumetric analysis of the condyle.Ten CBCT datasets were used to validate the proposed semi-automatic method for 3D rendering of mandibular condyles. First, a standardized orientation protocol of the skull was applied. After defining the volume of interest, a grey-scale cut-off value was selected to allow an automatic reconstruction of the condyle's surface. Subsequently, condylar contour was optimized manually. The whole process was repeated twice by 2 independent investigators. Volumetric measurements of the condyle were used as a measure of conformity between both investigators. The reproducibility of condylar volume reconstruction was excellent for intra-examiner measurements (CV = 3.65%, intraclass correlation coefficient = 0.97) and good for inter-examiner measurements (CV = 7.15%, ICC = 0.89). The overall mean time required for the segmentation process was 6.31 + 2.78 minutes. The proposed protocol provides an accurate and reproducible tool for 3D reconstruction of the mandibular condyle using CBCT data. Its implementation will enable adequate follow-up of morphological changes in bone tissue with a Hounsfield unit-based imaging segmentation method.

Three-Dimensional Analysis of Long-Term Stability After Bilateral Sagittal Split Ramus Osteotomy Fixed With a Single Miniplate With 4 Monocortical Screws and 1 Bicortical Screw: A Retrospective 2-Center Study.

PURPOSE: This study evaluated the long-term stability of bilateral sagittal split ramus osteotomy fixed with a single miniplate with 4 monocortical screws and 1 bicortical screw (hybrid technique [HT]) using 3-dimensional (3D) analysis and an objective measuring tool, cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Sixty-four patients who underwent bimaxillary surgery with mandibular advancement fixed with the HT were selected from 2 different institutions and enrolled in this retrospective study. All patients underwent CBCT preoperatively, 1 month after surgery, and 12 months after surgery. To estimate the long-term stability of the HT, volumetric comparisons were performed using the following measurements: distance between the gonion and the B point in the sagittal plane; distance between the right and left gonion transversally; and the angle of the line connecting the mandibular notch and the gonion and the line connecting the gonion and the B point vertically. RESULTS: Statistical analysis showed no relevant relapse (<1 mm or <1°) when using the HT. However, a positive correlation between the amount of advancement and the amount of postoperative relapse was observed. CONCLUSION: The HT produces stable postoperative 3D results after 12 months.

On the feasibility of minimally invasive Le Fort I with patient-specific implants: Proof of concept.

A novel approach to Le Fort I osteotomy is presented, integrating patient-specific implants (PSIs), osteosynthesis and cutting guides within a minimally invasive surgical framework, and the accuracy of the procedure is assessed through 3D voxel-based superimposition. The technique was applied in 5 cases. Differences between the surgical plan and final outcome were evaluated as follows: a 2-mm color scale was established to assess the anterior surfaces of the maxilla, mandible and chin, as well as the condylar surfaces. Measurements were made at 8 specific landmarks, and all of them showed a mean difference of less than 1 mm. In conclusion, the described protocol allows for minimally invasive Le Fort I osteotomy using PSIs. Besides, although the accuracy of the results may be limited by the small sample size, the findings are consistent with those reported in the literature. A prospective comparative study is needed to obtain statistically significant results and draw meaningful conclusions.

Bilateral sagittal split osteotomy with or without concomitant removal of third molars: a retrospective cohort study of related complications and bone healing.

PURPOSE: To carry out a comparative evaluation of the intra- and postoperative complications, and bone healing, following bilateral sagittal split osteotomy (BSSO) with or without concomitant removal of third molars. MATERIAL AND METHODS: A retrospective analysis was performed of two cohorts subjected to BSSO with the intraoperative removal of third molars (test group) versus the removal of third molars at least 6 months prior to BSSO (control group), comprising at least 1 year of clinical and radiographic follow-up. Partially or completely erupted third molars were extracted immediately before completing the osteotomy, whereas impacted third molars were removed after the osteotomy had been performed. Hardware reinforcement was performed in bimaxillary cases where concomitant molar extraction impeded placement of the retromolar bicortical screw of the hybrid technique. RESULTS: A total of 80 surgical sites were included (40 in each group). Concomitant extraction of the molar represented a mean increase in surgery time of 3.7 min (p < 0.001). No additional complications occurred in the test group (p = 0.476). The gain in bone density was preserved in both groups (p = 0.002), and the increase was of the same magnitude in both (p = 0.342), despite the fact that the immediate and final postoperative bone densities were significantly higher in the control group (p = 0.020). CONCLUSION: The results obtained support concomitant molar extraction with BSSO as a feasible option.

Vascular Delay Soft Tissue Technique in Oral/Maxillary Bone Reconstructive Surgery: A Technical Note.

PURPOSE: The present study describes a new presurgical soft tissue technique in oral/maxillary bone reconstructive surgery for reducing the risk of soft tissue dehiscence and its related complications. MATERIALS AND METHODS: Ten consecutive patients with Cawood and Howell type V atrophy were scheduled for CAD/CAM titanium mesh bone reconstructive surgery after applying the vascular delay technique 21 days before regenerative surgery. The surgical and healing complications were clinically assessed at nine time points, ranging from the time of bone regenerative surgery to 9 months after surgery. Surgical complications included flap damage and neurologic and vascular complications. Healing complications were subdivided into four classes. These classes comprised Class I: small membrane exposure (≤ 3 mm) without purulent exudate; Class II: large membrane exposure (> 3 mm) without purulent exudate; Class III: membrane exposure with purulent exudate; and Class IV: abscess formation without membrane. RESULTS: The study sample included seven men and three women (mean age: 48.2 ± 3.5 years) with seven mandibular cases and three maxillary cases. The defect length ranged from three to six teeth, with a mean mesiodistal distance of 29.9 ± 8.5 mm and a mean volume augmentation of 2.03 ± 0.9 cm3. There were no surgical complications. One patient presented a Class I healing complication that did not affect the regeneration outcome. CONCLUSIONS: The vascular delay technique appears to reduce the risk of soft tissue dehiscence and exposure in bone regenerative surgery, though randomized studies involving larger samples and longer follow-up periods are needed in order to draw firm conclusions.

Analysis of the implementation of a circuit for intra-operative superposition and comparison of the surgical outcomes using ICBCT in maxillofacial surgery.

PURPOSE: This paper describes a novel circuit for intraoperative analysis with ICBCT in maxillofacial surgery. The aim is to establish guidelines, define indications, and conduct an analysis of the implementation of the circuit for intraoperative comparison of surgical outcomes in relation to 3D virtual planning in maxillofacial surgery. METHODS: The study included 150 maxillofacial surgical procedures. Intraoperative actions involved fluoroscopy localization, intraoperative CBCT acquisition, segmentation, and superimposition, among other steps. Surgical times due to intraoperative superposition were measured, including time required for ICBCT positioning and acquisition, image segmentation, and comparison of 3D surfaces from the surgical planning. RESULTS: Successful intraoperative comparison was achieved in all 150 cases, enabling surgeons to detect and address modifications before concluding the surgery. Out of the total, 26 patients (17.33%) required intraoperative revisions, with 11 cases (7.33%) needing major surgical revisions. On average, the additional surgical time with this circuit implementation was 10.66 ± 3.03 min (n = 22). CONCLUSION: The results of our research demonstrate the potential for performing intraoperative surgical revision, allowing for immediate evaluation, enhancing surgical outcomes, and reducing the need for re-interventions.

Effectiveness of virtual reality in relieving anxiety and controlling hemodynamics during oral surgery under local anesthesia: A prospective randomized comparative study.

It was the aim of the study to evaluate the contribution of a relaxing immersive experience with virtual reality (VR) goggles in reducing patient anxiety related to wisdom tooth extraction under local anesthesia. A prospective randomized comparative study in consecutive patients scheduled for bilateral wisdom tooth extraction under local anesthesia was carried out between March and December 2022. Both sides were operated upon in the same surgery, but on one side VR goggles were applied (VR), while on the other they were not (noVR). Anxiety was evaluated both subjectively (State-Trait Anxiety Inventory [STAI] and visual analogue scale [VAS]) and objectively (measuring heart rate, blood pressure [BP] and blood oxygen saturation) before (T1) and after each surgical step (T2VR and T2noVR). The study sample consisted of 27 patients: 9 men and 18 women, with an average age of 25.8 ± 6.5 years (range: 18-43). Anxiety as assessed by the STAI and VAS decreased from T1 to T2 (p < 0.001 and p < 0.001, respectively), although to a similar degree regardless of whether VR was used or not. Heart rate showed significant differences influenced by RV exposure (p = 0.013): it increased +2.5 ± 8.8 bpm in the control group and decreased -2.22 ± 7.55 bpm with VR (p = 0.013). Both minimum and maximum BP after surgery were significantly higher in the noVR group (p = 0.002 and p = 0.040, respectively). Regarding minimum BP, VR proved more effective among male patients (p = 0.057) and on starting the procedure using VR (p = 0.055). The results provided evidence of meaningful control of the hemodynamic variables, but less predictable performance in the subjective evaluation of anxiety.

Consensus Report and Recommendations on the Management of Late-stage Internal Derangement of the Temporomandibular Joint.

Introduction: This report investigates late-stage internal derangement (ID) of the temporomandibular joint (TMJ) with the aim of establishing a more effective and personalized treatment protocol to improve patients' quality of life (QoL). Material and methods: A consensus was reached among maxillofacial surgeons specializing in LSID, based on a literature research and collective expert experience following the Delphi method. Consensus was considered to be achieved when a response received at least 80% of votes. Results: Four expert groups were established, respectively, focusing on diagnosis, minimally invasive surgery (MIS), open surgery and joint replacement. A comprehensive approach to late-stage ID of the TMJ requires a consensus report. This underscores the need for a personalized treatment plan, considering the variability in clinical presentations and progression of this pathology. Our recommendations aim to optimize clinical outcomes and enhance patient QoL.

Aesthetic Considerations in Orthofacial Surgery.

Currently, the wish to optimize facial esthetics-in the context of a dysfunctional occlusion or not-has become the main motivation for orthognathic surgery in many cases. In this context, considering that protrusive faces are advised more attractive and that the lack of skeletal support accelerates the aging process, orthognathic surgery will mostly involve a forward movement of the maxillamandibular complex..

Accuracy of Orthognathic Surgical Planning using Three-dimensional Virtual Techniques compared with Conventional Two-dimensional Techniques: a Systematic Review.

Objectives: The objective was to assess the accuracy of orthognathic surgical planning using three-dimensional virtual planning compared with conventional two-dimensional planning. Material and Methods: MEDLINE (PubMed), Embase and Cochrane Library search combined with hand-search of relevant journals was conducted to identify randomized controlled trials (RCTs) published in English through August 2nd, 2022. Primary outcomes included postsurgical accuracy of hard and soft tissue. Secondary outcomes included treatment planning time, intraoperative time, intraoperative blood loss, complications, financial expenses, and patient-reported outcome measures (PROMs). Quality and risk-of-bias assessment were evaluated by Cochrane risk of bias tool and GRADE system. Results: Seven RCTs characterised by low, high, and unclear risk of bias fulfilled inclusion criteria. Included studies disclosed conflicting results regarding accuracy of hard and soft tissue as well as treatment planning time. The intraoperative time was shortened, and financial expenses were increased with three-dimensional virtual surgical planning (TVSP), while no planning-related complications were revealed. Comparable improvement in PROMs were reported with TVSP and two-dimensional planning. Conclusions: Future orthognathic surgical planning will indisputable be performed by three-dimensional virtual planning. The financial expenses, treatment planning time, and intraoperative time will therefore probably decrease due to further development of three-dimensional virtual planning techniques. The hard and soft tissue accuracy between planned position and achieved surgical outcome seems to be improved by three-dimensional virtual planning compared with two-dimensional planning, although results are inconsistent. Further development of three-dimensional virtual planning involving cutting guides and patient-specific osteosynthesis plates are therefore needed to improve the accuracy of orthognathic surgical planning.

Barcelona line. A multicentre validation study of a facial projection reference in orthognathic surgery.

The purpose of this study was to validate an already published facial anteroposterior reference: upper incisor (UI) to soft tissue plane or so-called Barcelona line (BL) to trace the most aesthetic sagittal position of the maxilla. A cross-sectional multicentre evaluation of Caucasian patients from Spain and Brazil with different anteroposterior maxillary positions was designed. Sagittal images in natural head orientation of grouped patients according to the horizontal distance from the UI to BL were ranked by healthcare professionals and non-professional Caucasian raters according to the aesthetic perception of each profile, using a digital survey. Seventy-four raters (50 laypeople, 12 orthodontists, and 12 maxillofacial surgeons) rated 40 profiles. The best-rated profile corresponded to group 3 (0-4 mm UI-BL) with 61.8% of positive evaluations, followed by group 4 (≥ 4 mm UI-BL): with 61.1%. On the other hand, group 1 (≤-4 mm UI-BL) was the worst-ranked profile with 71.8% of negative evaluations, followed by group 2 (-4-0 mm UI-BL): with 59.6% of negative evaluations. The correlation between the mean assessment score and UI-BL showed a moderately-strong association (r = 0.68, p < 0.001). The inter-rater reliability of assessment (74 evaluators) was moderate (k = 0.49, 95% CI: 0.39 to 0.59). The results suggest that protrusive middle-third facial profiles are preferable. The BL is proposed as a simple, individualised, and reproducible tool to trace an aesthetic sagittal position of the maxilla in orthognathic surgery.

Three-Dimensional Evaluation of the Accuracy of Zygomatic Implant Placement Through an In-House Fully Guided Approach.

Purpose: To validate guided surgery for zygomatic implants (ZIs) by analyzing the final position of the implants relative to the preoperatively planned position. Material and Methods: Five patients with fully edentulous atrophic maxillae treated with four ZIs through a fully guided implant surgical approach were evaluated. The preoperative phase included digital planning, through which the surgical guide was designed and created. Analysis of the guided surgery accuracy was carried out by superimposing the digital planning over the final position of the implants using preoperative and postoperative CBCT. The radiologic evaluation included implant angular deviation, entrance deviation, exit deviation, platform deviation, and apex apicocoronal and mesiodistal deviation. Results: All five patients (two men and three women; mean age: 61.8 ± 3 years) were each treated with four ZIs using a fully guided approach with an extrasinusal path, obtaining ideal emergence of the implants. Superimposition comparison found a mean axial angular implant deviation of 0.79 ± 0.41 degrees and a mean implant entrance deviation of 0.95 ± 0.26 degrees. The platform deviation was 0.62 ± 0.19 mm buccopalatally and 0.76 ± 0.14 mm mesiodistally, while the apical deviation was 0.42 ± 0.13 mm buccopalatally and 1.06 ± 0.37 mm mesiodistally. Conclusions: Guided surgery in zygomatic implants appears to be sufficiently accurate to make it a safe and predictable technique.

Fat grafting in patients with cleft lip and palate: A systematic review.

This systematic review aims to compare different fat-grafting techniques for cleft lip and palate repair. A search was conducted in PubMed, Embase, Cochrane Library, gray literature and reference lists of selected articles. A total of 25 articles were included, 12 on closure of palatal fistula and 13 on cleft lip repair. The rate of complete resolution of palatal fistula ranged from 88.6% to 100% in studies with no control group, whereas in comparative studies patients receiving a fat graft showed better outcomes than those not receiving a graft. Evidence suggests that fat grafting can be indicated for the primary and secondary repair of cleft palate, with good results. The use of dermis-fat grafts in lip repair was associated with gains in surface area (11.5%), vertical height (18.5%-27.11%), and lip projection (20%). Fat infiltration was associated with increased lip volume (6.5%), vermilion show (31.68% ± 24.03%), and lip projection (46.71% ± 31.3%). The available literature suggests that fat grafting is a promising autogenous option for palate and fistula repair and for improvement of lip projection and scar aesthetics in patients with cleft. However, to develop a guideline, further studies are needed to confirm whether one technique is superior to the other.

Patient's perception of recovery following surgical removal of mandibular third molars. A prospective european multi-center study.

This study evaluated patient's perception of recovery following surgical removal of mandibular third molars (SRM3s) including analyze of potential risk factors associated with impaired convalescent. Patient related parameters combined with preoperative questionnaires including Modified Dental Anxiety Scale, Oral Health Impact Profile-14, and Decayed, Missing, Filled Teeth index were correlated with questionnaires assessing pain, swelling, trismus, sick leave, social and working isolation, physical appearance, eating and speaking ability, diet variations, sleep impairment, impaired sensation of the lip, chin, and tongue, one month following SRM3s. Totally, 412 patients (223 females, 189 males) with mean age of 29.4 years were included. Treatment satisfaction and willingness to undergo similar surgery were reported by 92% and 95%, although 21% reported that the surgery and postoperative period had been worse than expected. Mean days with pain, sick leave, and swelling were 3.6, 2.1, and 3.6, respectively. Preoperative symptoms, dental anxiety level, and prolonged surgical time were associated with increased pain and swelling (P < 0.05). Pell and Gregory classification (I-IIIC) were associated with impaired sensation of the lower lip and chin (P < 0.05). Consequently, results from this study improve the surgeon's ability to predict parameters that predisposed to impaired recovery and neurosensory disturbances following SRM3s.

Extramaxillary Zygomatic Implant Coverage with a Pedicled Buccal Fat Pad Flap Through a Tunnel Approach: A Prospective Case Series.

PURPOSE: To describe the benefits of covering the extrasinusal length of extramaxillary zygomatic implants with a pedicled buccal fat pad flap through a tunnel approach. MATERIALS AND METHODS: Four extramaxillary zygomatic implants were placed in 10 patients and loaded immediately with an acrylic provisional fixed prosthesis. The extrasinusal length of every implant was covered with a pedicled buccal fat pad flap. Study variables were implant survival rate, peri-implant soft tissue recession (PISTR), peri-implant soft tissue condition (PISTC), modified Bleeding Index (mBI), and suppuration. The statistical analysis comprised the Brunner-Langer model of longitudinal data for each variable and the analysis of variance to assess main effects and interactions. RESULTS: All the zygomatic implants showed osseointegration, resulting in a survival rate of 100%. The PISTR was evaluated after surgery (T0) and after 12 months (T1), statistically significant differences being observed (P = .014). Recession also depended on specific implant positioning; zygomatic implants in the anterior were found to have a higher risk of recession vs implants in the posterior (P = .065). The PISTC was assessed at T0 and T1, and no statistically significant changes were observed (P = .718). Bleeding on probing was present in 10% of the implants at T0 and in 15% at T1, the difference being nonsignificant (P = .317). CONCLUSION: The use of a pedicled buccal fat pad flap to cover the extrasinusal length of extramaxillary zygomatic implants appears to reduce the risk of soft tissue recession and exposure of the implant surface to the oral cavity.

Covariates Relating to Implant Failure and Marginal Bone Loss of a Novel Triangular Neck-Implant Placed by Post-Graduate Students: A 1-Year Prospective Cohort Study.

(1) Background: Most of the clinical literature dealing with dental implants has been issued by experienced teams working either in university settings or in private practice. The purpose of this study was to identify contributing covariates to implant failure and marginal bone loss (MBL) at the 1-year follow-up of a novel triangular-neck implant design when placed by inexperienced post-graduate students. (2) Methods: A prospective cohort study was conducted on study participants eligible for implant placement at the UIC (International University of Catalonia), Barcelona, Spain. Implant failure rate and contributors to implant failure and MBL were investigated among 24 implant and patient variables. (3) Results: One hundred and twenty implants (V3, MIS) were placed and rehabilitated by the students. The mean insertion torque was 37.1 Ncm. Survival and success rates were 97.5% and 96.7%, respectively. Implants placed in patients with smoking habits displayed a tendency of higher failure risk (OR = 5.31, p = 0.17) when compared to non-smokers. The mean (SD) MBL was 0.51 (0.44) mm. Gender significantly affected the MBL (p = 0.020). Bleeding on probing (BoP) on the buccal sites proved to be a good predictor of proximal MBL (p = 0.030). (4) Conclusions: The survival and success rates of the V3 triangular-neck implant placed by inexperienced post-graduate students at the 1-year follow-up were high and similar to the ones published in the literature by experienced teams on other implants.