Increase in polyunsaturated fatty acids and carotenoid accumulation in the microalga Golenkinia brevispicula (Chlorophyceae) by manipulating spectral irradiance and salinity.

Microalgal biotechnology offers a promising platform for the sustainable production of diverse renewable bioactive compounds. The key distinction from other microbial bioprocesses lies in the critical role that light plays in cultures, as it serves as a source of environmental information to control metabolic processes. Therefore, we can use these criteria to design a bioprocess that aims to stimulate the accumulation of target molecules by controlling light exposure. We study the effect on biochemical and photobiological responses of Golenkinia brevispicula FAUBA-3 to the exposition of different spectral irradiances (specifically, high-fluence PAR of narrow yellow spectrum complemented with low intensity of monochromatic radiations of red, blue, and UV-A) under prestress and salinity stress conditions. High light (HL) intensity coupled to salinity stress affected the photosynthetic activity and photoprotection mechanisms as shown by maximal quantum yield (Fv/Fm) and non-photochemical quenching (NPQmax) reduction, respectively. HL treatments combined with the proper dose of UV-A radiation under salinity stress induced the highest carotenoid content (2.75 mg g dry weight [DW]- 1) composed mainly of lutein and ß-carotene, and the highest lipid accumulation (35.3% DW) with the highest polyunsaturated fatty acid content (alpha-linolenic acid (C18:3) and linoleic acid (C18:2)). Our study can guide the strategies for commercial indoor production of G. brevispicula for high-value metabolites.

Effectiveness of complementary irrigation routines in debriding pulp tissue from root canals instrumented with a single reciprocating file.

AIM: To compare histologically the debridement efficacy of four irrigation techniques in root canals instrumented with a reciprocating single file. METHODOLOGY: From recently extracted premolars with vital pulp, 68 were selected and classified as having round canals (mesiodistal diameter similar to buccolingual) or oval-shaped canals (mesiodistal diameter 2.5 times larger than buccolingual) (n = 32, each) by means of bidirectional radiographs. Four additional uninstrumented samples served as histological controls. The root canals of the specimens were accessed and then instrumented with Reciproc R25® and further assigned to one of four experimental groups according to the complementary irrigation technique: Group I, conventional syringe; Group II, passive ultrasonic irrigation; Group III, manual dynamic activation (MDA); and Group IV, EndoActivator® . Roots were then demineralized and the apical 3 mm was multi-sliced and processed for histologic examination. The percentage of residual pulp tissue was calculated at each cross section. Kruskal-Wallis and Mann-Whitney tests were used to evaluate the effects of irrigation technique, root canal shape and level of cross section on the percentage of residual pulp tissue (P < 0.05). RESULTS: Irrigation technique and root canal shape significantly influenced the percentage of residual pulp tissue (P < 0.05) of canals instrumented with the R25 instrument. Percentage of residual pulp tissue was significantly less using ultrasonic irrigation (P < 0.05), but there was no difference between other irrigation techniques (P > 0.05). Round canals retained significantly less percentage of residual pulp tissue compared to oval-shaped canals (P = 0.001). At 3 mm, there was less pulp tissue compared to levels 2 and 1 mm (P < 0.05). CONCLUSIONS: In canals instrumented with R25 files, ultrasonic irrigation was more effective in removing pulp tissue in the apical level, especially for the debridement of oval-shaped canals.

Association between maternal-infant bonding and depressive symptoms in Neonatal Intensive Care Unit mothers: A case-control study.

OBJECTIVES: Maternal perinatal depression has been associated with impaired mother-infant bonding. The adverse effect of this impaired bonding has been reported. This study aimed to investigate and compare the posnatal depressive symptoms and the mother-infant bonding in a Neonatal Intensive Care Unit (NICU) and of mothers with healthy newborns respectively. Secondly, was to explore the association between depressive symptomatology and bonding in both groups. METHODS: In this case study, mothers in the early pospartum period who gave birth in the same perinatal center of Greece were recruited to participate. The cases consisted of 88 mothers of neonates who were hospitalized in the NICU and controls were 100 mothers of full-term healthy neonates. For the collection of the data questionnaires including demographics and perinatal variables were used. For the bonding and posnatal assessment, the Mother to Infant Bonding Scale, the Postpartum Bonding Questionnaire, and the Hospital Anxiety and Depression Scale were used. RESULTS: There was a significant difference between the mean of bonding scores of NICU mothers and the control group (t = -2.696, P = 0.008). NICU mothers presented lower scores in bonding with the newborn compared to the control group and presented higher depression scores compared to those of controls (χ2 = 28.588, P = 0.000). The depression scores were correlated with bonding scores in both groups. DISCUSSION: A NICU admission has an impact on bonding and in some way interacts with maternal pospartum mental health, therefore more research is needed. CONCLUSIONS: NICU mothers have been presented as more vulnerable than mothers of healthy infants since they expressed a lower mother-infant bonding and higher depression scores. The support of these vulnerable mothers and the facilitation of mother-infant bonding by the NICU staff is of utmost importance.

ITER collective Thomson scattering-Preparing to diagnose fusion-born alpha particles (invited).

The ITER Collective Thomson scattering (CTS) diagnostic will measure the dynamics of fusion-born alpha particles in the burning ITER plasma by scattering a 1 MW 60 GHz gyrotron beam off fast-ion induced fluctuations in the plasma. The diagnostic will have seven measurement volumes across the ITER cross section and will resolve the alpha particle energies in the range from 300 keV to 3.5 MeV; importantly, the CTS diagnostic is the only diagnostic capable of measuring confined alpha particles for energies below ∼1.7 MeV and will also be sensitive to the other fast-ion populations. The temporal resolution is 100 ms, allowing the capture of dynamics on that timescale, and the typical spatial resolution is 10-50 cm. The development and design of the in-vessel and primary parts of the CTS diagnostic has been completed. This marks the beginning of a new phase of preparation to maximize the scientific benefit of the diagnostic, e.g., by investigating the capability to contribute to the determination of the fuel-ion ratio and the bulk ion temperature as well as integrating data analysis with other fast-ion and bulk-ion diagnostics.

[Management of elective surgical activity in a tertiary hospital during the SARS-CoV-2 pandemic]. / Gestión de la actividad quirúrgica electiva de un hospital terciario durante la pandemia por SARS-CoV-2.

INTRODUCTION: During the SARS-CoV-2 pandemic, elective surgical activity was reduced to a minimum. As both the number of cases and the hospitalization needs for this pathology decreased, we thought it appropriate to progressively recover scheduled surgical activity. This work describes how, even with the current alarm state, we were able to practically normalize this activity in a few weeks. METHODS: Two weeks before the intervention, the patients included in the waiting lists were contacted by telephone. After checking their health status and expressing their desire to undergo surgery, they were provided with recommendations to decrease the risk of coronavirus infection. Likewise, an exclusive circuit was established to carry out, 48 hours before the intervention, the detection of SARS-CoV-2 by means of exudates nasopharyngeal PCR. The results were evaluated by each surgical service and the anesthesiology service. In addition, asymptomatic Surgical Area professionals could undergo weekly screening for the early detection of coronavirus according to the recommendations of Occupational Health. RESULTS: In the midst of a pandemic, scheduled surgical activity was reduced by 85%. From the week of April 13, the operating rooms available were recovered, which allowed practically all surgical activity to be recovered the week of May 25. CONCLUSIONS: The creation of circuits and procedures to streamline surgical activity, still in full force of the state of alarm, has allowed us, in a few weeks, to recover almost all of it.

Absorbable stabilisation of the bar in minimally invasive repair of pectus excavatum.

INTRODUCTION: The minimally invasive repair of pectus excavatum has become the preferred technique in most centres. One of the most important technical points for the final result is stabilisation of the bar, usually obtained by one or two metal stabilisers. Recently, long-term absorbable stabilisers have become available (LactoSorb, Biomet, Jacksonville, FL, USA). Made of poly-L-lactic and polyglycolic acid, they have been introduced with the aim of reducing local discomfort and making removal of the bar easier. Their efficacy for the stabilisation of the bar has not been proved yet. In this paper we compare the surgical outcome in two groups of patients, one treated with metallic and the other with absorbable stabilisers. MATERIAL AND METHODS: A total of 280 patients underwent pectus excavatum repair using a Nuss technique in two centres. In 194 patients (group 1), operated on since 2001, the metallic stabiliser was used. In 86 patients (group 2), operated on since February 2007, the LactoSorb stabiliser was preferred. We compared both groups in terms of surgical details, local symptoms or complications, and bar instability rate. RESULTS: The surgical technique for the stabilisation of the bar was identical in both groups, but in group 1 the stabiliser was fastened to the bar with a steel wire, while in group 2 polyglycolic sutures were used. No differences in local discomfort or postoperative pain were observed between the groups. The LactoSorb stabiliser was palpable for at least 6-9 months, and progressively disappeared at 9-12 months. In group 1 we observed 6 local complications. In particular, two patients presented with infection, one of them associated with a skin lesion and opening over the metallic stabiliser (revision of the wound was performed). Another patient developed a thoracic wall haematoma after suffering a trauma over the metallic stabiliser, 13 months after operation. Three patients developed a seroma. In group 2 we observed 3 subcutaneous swellings at the site of the LactoSorb stabiliser at 6, 8 and 9 months after the operation. We did not observe either skin lesions or infections. In the group with metallic stabiliser, 3 patients (1.5 %) had bar dislocation, while we did not observe bar instability in the group with LactoSorb stabiliser. CONCLUSIONS: LactoSorb stabiliser is safe and effective for stabilising the bar in pectus surgery. We suggest its routine use as it appears to be less traumatic and could make bar removal easier.

Testing of the ITER plasma position reflectometry high-field side in-vessel antenna assembly prototype.

The ITER plasma position reflectometry diagnostic aims to provide measurements of the edge plasma to correct or supplement the magnetics for plasma position control. It consists of five reflectometers, two of which have components installed inside the vessel. One of these systems probes the plasma from the high-field side using a bistatic array of small pyramidal horns located in the gap between two blankets. Electromagnetic simulations have shown that the blankets shape the radiation pattern and need to be considered as part of the antenna. Full-wave plasma simulations have confirmed these results and have also shown that the first-wall geometry may induce measurement errors above the required margin. To further address these issues, we manufactured a prototype of the high-field side antenna, which includes a mock-up of the blanket modules. Here, we present the results of the prototype tests, with and without the blankets, using a metallic mirror as a target. The signals reflected from the mirror are used to derive the mirror distance and assess the precision of the measurements under different arrangements. The sensitivity to the blankets' installation tolerances is also assessed by changing the antennas' position with respect to the blankets' surfaces and cut-outs.

Evaluation of waiting times for breast cancer diagnosis and surgical treatment.

PURPOSE: To analyse any delays in breast cancer diagnosis and surgical treatment, influence of clinical and biological factors and influence of delays on survival. METHODS/PATIENTS: A descriptive, observational, and retrospective study was conducted between 2006 and 2016 on stages I-III breast cancer patients. This is a retrospective review of health records to collect data on delays, patients' clinical data, biological features of the tumour and information on treatment. Mortality data from the National Death Index. RESULTS: In 493 evaluable patients, the median of days from the first symptom to mammography, biopsy, and surgery was 41, 57, and 92, respectively. The median of days from screening mammography to biopsy and surgery was 10 and 51, respectively. From biopsy to surgery, the median was 34 days in every case. Over the last 5 years, an increase in biopsy-surgery delay has been observed (p = 0.0001). Tumour stages I and II vs. stage III (RR 1.74. 95% CI 1.08-2.80, p = 0.027), diagnosis in screening (RR 0.66. 95% CI 0.45-0.96, p = 0.030), and use of magnetic resonance imaging (RR 2.08. 95 CI 1.21-3.56, p = 0.008) condition a greater biopsy-surgery delay. No influence of delays on survival has been identified. CONCLUSIONS: Delays in diagnosis and surgery in the case of women diagnosed on the basis of symptoms may be improved. There is a temporary tendency to a greater delay in surgery. Some clinical and biological factors must be taken into account to optimise delays. Survival results are not adversely affected by delays.

Thermal analysis of the in-vessel components of the ITER plasma-position reflectometry.

The ITER plasma position reflectometry system measures the edge electron density profile of the plasma, providing real-time supplementary contribution to the magnetic measurements of the plasma-wall distance. Some of the system components will be in direct sight of the plasma and therefore subject to plasma and stray radiation, which may cause excessive temperatures and stresses. In this work, thermal finite element analysis of the antenna and adjacent waveguides is conducted with ANSYS V17 (ANSYS® Academic Research, Release 17.0, 2016). Results allow the identification of critical temperature points, and solutions are proposed to improve the thermal behavior of the system.

Performance assessment of the antenna setup for the ITER plasma position reflectometry in-vessel systems.

The design of the in-vessel antennas for the ITER plasma position reflectometry diagnostic is very challenging due to the need to cope both with the space restrictions inside the vacuum vessel and with the high mechanical and thermal loads during ITER operation. Here, we present the work carried out to assess and optimise the design of the antenna. We show that the blanket modules surrounding the antenna strongly modify its characteristics and need to be considered from the early phases of the design. We also show that it is possible to optimise the antenna performance, within the design restrictions.

The 2.15 A crystal structure of CG-16, the developmentally regulated homodimeric chicken galectin.

Differential developmental regulation of expression, fine-specificity differences in ligand recognition and disparate capacity for homodimerization are characteristics of the two currently known proto-type chicken galectins. The X-ray crystal structure of the first avian galectin, the homodimeric agglutinin from chicken liver (CG-16), has been solved in the absence of ligand in two crystal forms. Although the arrangement of lectin dimers in the two crystals is different, the structure of the monomers and their association into the extended beta-sandwich that characterises the dimer are virtually identical. The fold establishes a beta-sandwich motif composed of a five-stranded and a six-stranded beta-sheet evocative of proto-type mammalian galectins. The carbohydrate-binding site is occupied by six water molecules that take the place of the sugar in the complex. They help to stabilise in the absence of the ligand the spatial arrangement of the amino acid side-chains involved in sugar recognition. Docking of N-acetyllactosamine into the binding site reveals that three of these water molecules, which are in direct contact with the protein, occupy positions equivalent to the key sugar hydroxyl groups, namely the hydroxyls at positions 4 and 6 of the galactose unit and at position 3 of the N-acetylglucosamine unit. Crystallographic data are fully consistent with the binding features in solution previously derived from chemical mapping with deoxy, fluoro and O-methyl derivatives and laser photo-CIDNP (chemically induced dynamic nuclear polarisation) studies. The possible molecular basis for the monomeric character of the chicken intestinal galectin as well as potential mechanisms of oxidative inactivation by disulphide bridging are evaluated on the basis of the given structural information concerning the CG-16 dimer interface and the cysteine residues, respectively.

The 2.4 A resolution crystal structure of boar seminal plasma PSP-I/PSP-II: a zona pellucida-binding glycoprotein heterodimer of the spermadhesin family built by a CUB domain architecture.

The crystal structure of porcine seminal plasma spermadhesin PSP-I/PSP-II heterodimer has been determined in two crystal forms by multiple isomorphous replacement in an hexagonal crystal (space group P6(1)22) and molecular replacement in a trigonal crystal of space group P3(2)21. The crystal structure has been refined at 2.4 A resolution to an R-factor of 20.0% (Rfree = 25.9%) for 14,809 independent reflections with intensities greater than 2 sigma (I), with root-mean-square deviations of 0.009 A and 1.657 degrees from ideal bond lengths and bond angles, respectively. The final model includes 1688 non-hydrogen protein atoms of 221 amino acids and 79 water molecules. PSP-I/PSP-II represents the first crystal structure of a mammalian zona pellucida-binding protein. PSP-II displays a putative carbohydrate-recognition site located around its Asn50. This region shares structural features with sugar binding sites of known lectin structures of the leguminous and galectin families. PSP-I and PSP-II are N-glycosylated at asparagine residues 50 and 98, respectively, and show site heterogeneity. Only the innermost N-acetylglucosamine of PSP-I is defined in the crystal structure. Both subunits of the PSP-I/PSP-II heterodimer are built by a single CUB domain architecture. The CUB domain displays a novel fold, which consists of a compact ellipsoidal beta-sandwich structure (42 A x 27 A x 23 A) organized into two 5-stranded beta-sheets. Each sheet contains parallel and antiparallel beta-strands. Two disulphide bridges, which are conserved in all spermadhesin molecules and many CUB domains, crosslink loop LA and strand beta 4 and loops LE and LG, respectively, at opposite edges of the same face of the domain. The four highly conserved aromatic residues and 15 out of 17 invariant hydrophobic residues, which define the CUB domain signature, display an interior location, suggesting that this hydrophobic core may be essential for maintaining the overall folding of the domain. Most of the hydrophobic core residue characteristics are conserved in the jellyroll topology of certain icosahedral virus capsid proteins, indicating that the CUB domain and the viral proteins share a minimal structural core.

The 2.15 A crystal structure of a triple mutant plastocyanin from the cyanobacterium Synechocystis sp. PCC 6803.

The crystal structure of the triple mutant A42D/D47P/A63L plastocyanin from the cyanobacterium Synechocystis sp. PCC 6803 has been determined by Patterson search methods using the known structure of the poplar protein. Crystals of the triple mutant A42D/D47P/A63L, which are stable for days in its oxidized form, were grown from ammonium sulfate, with the cell constants a = b = 34.3 A and c = 111.8 A belonging to space group P3(2)21. The structure was refined using restrained crystallographic refinement to an R-factor of 16.7% for 4070 independent reflections between 8.0 and 2.15 A with intensities greater than 2 sigma (I), with root mean square deviations of 0.013 A and 1.63 degrees from ideal bond lengths and bond angles, respectively. The final model comprises 727 non-hydrogen protein atoms within 98 residues, 75 water molecules and a single copper ion. The overall tertiary fold of Synechocystis plastocyanin consists of a compact ellipsoidal beta-sandwich structure made up of two beta-sheets embracing a hydrophobic core. Each sheet contains parallel and antiparallel beta-strands. In addition to the beta-sheets, the structure contains an alpha-helix from Pro47 to Lys54 that follows beta-strand 4. The three-dimensional structure of Synechocystis plastocyanin is thus similar to those reported for the copper protein isolated from eukaryotic organisms and, in particular, from the cyanobacterium Anabaena variabilis, the only cyanobacterial plastocyanin structure available so far. The molecule holds an hydrophobic region surrounding His87, as do other plastocyanins, but the lack of negatively charged residues at the putative distant remote site surrounding Tyr83 could explain why the Synechocystis protein exhibits a collisional reaction mechanism for electron transfer to photosystem I (PSI), which involves no formation of the transient plastocyanin-PSI complex kinetically observed in green algae and higher plants.

Crystal structure of acidic seminal fluid protein (aSFP) at 1.9 A resolution: a bovine polypeptide of the spermadhesin family.

We report the three-dimensional crystal structure of acidic seminal fluid protein (aSFP), a 12.9 kDa polypeptide of the spermadhesin family isolated from bovine seminal plasma, solved by the multiple isomorphous replacement method and refined with data to 1.9 A resolution with a final R-factor of 17.3%. aSFP is built by a single CUB domain architecture, a 100 to 110 amino-acid-residue extracellular module found in 16 functionally diverse proteins. The structure of aSFP reveals that the CUB domain displays a beta-sandwich topology organised into two 5-stranded beta-sheets, each of which contain two parallel and four antiparallel strands. The structure of aSFP is almost identical to that of porcine spermadhesins PSP-I and PSP-II, which in turn show limited structural similarity with jellyroll topologies of certain virus capsid proteins. Essentially, topologically conserved residues in these proteins are those internal amino acids forming the hydrophobic core of the CUB and the jellyroll domains, suggesting their importance in maintaining the integrity of these protein folds. On the other hand, the structure of aSFP shows structural features that are unique to this protein and which may provide a structural ground for understanding the distinct biological properties of different members of the spermadhesin protein family.

Exon 2 DNA sequence of the HLA-DRw13b allele obtained from genomes of five different individuals.

Exon 2 nucleotide sequence of the DRB1 gene encoding the HLA-DRw13b allele defined by DNA-RFLP (Restriction Fragment Length Polymorphism) typing, has been obtained by using five heterozygous individuals genomic DNA and a non isotopic automated "dideoxi" methodology. Its comparison with other known homologous DRB1 sequences suggests that two different mechanisms which generate HLA allele variability may have occurred in this particular exon 2: a gene conversion between DRw11 or DRw13 as acceptors and DR4-Dw15 or DRw8.1 as donors and in addition, a non-conservative point mutation at base 221. The relationship between this HLA sequence characteristics and certain diseases susceptibility is discussed.

Exon-2 nucleotide sequences, polymorphism and haplotype distribution of a new HLA-DRB gene: HLA-DRB sigma.

Two new allelic exon-2 HLA-DRB sequences have been identified by using universal and also specific DRB primers. They may correspond to a previously unidentified DRB gene (DRB sigma) and define a new supratypic group ("DRw54") which includes DR1, DR"Br", DR2 and DRw10 bearing HLA haplotypes. This is probably the last HLA-DRB gene to be described in the standard DR haplotypes on the bases of the number of TaqI RFLPs obtained. Sequence comparison with their respective DP and DQ sequences shows that DRB sigma is unequivocally placed within the DRB family and also a constructed "neighbouring homology tree" indicates that DRB sigma gene is probably the eldest in the DRB family, thus the first to diverge from the ancestral DRB gene. An hypothetically deduced DRB sigma beta 1 protein domain was found to be quite different from the corresponding DRB1, DRB3, DRB4 and DRB5 products, since residues 40-55 would bear a longer alpha-helical conformation and would also exist a loss of both the extended conformation at residues 50-54 and the alpha-helix at residues 64-71. Thus, the putative DRB sigma protein would be remarkably different to other DRB ones. Also, a DRB sigma partial transcript (exon-2) has been obtained by PCR of cDNA by using specific DRB sigma oligonucleotides, but a specific Northern blot hybridization has not been achieved.

Relating the effects of protein type and content in increased-protein cheese pies to consumers' perception of satiating capacity.

Since proteins have been shown to have the highest satiation-inducing effects of all the macronutrients, increasing the protein level is one of the main strategies for designing foods with enhanced satiating capacity. However, few studies analyze the effect that protein addition has on the texture and flavor characteristics of the target food item to relate it to the expected satiating capacity it elicits. The present work studied cheese pies with three levels of soy and whey proteins. Since the protein level altered the rheological behavior of the batters before baking and the texture of the baked pies, the feasibility of adding several protein levels for obtaining a range of final products was investigated. A check-all-that-apply questionnaire containing 32 sensory and non-sensory characteristics of the samples was given to consumers (n = 131) who also scored the perceived samples' satiating capacity. The results showed that the type and content of protein contributed distinctive sensory characteristics to the samples that could be related to their satiating capacity perception. Harder and drier samples (high protein levels) were perceived as more satiating with less perceptible sweet and milky cheese pie characteristic flavors. Soy contributed an off-flavour. These results will contribute to a better understanding of the interrelation of all these factors, aiding the development of highly palatable solid foods with enhanced satiating capacities.

Relating dynamic perception of reformulated cheese pies to consumers' expectations of satiating ability.

Designing satiating food is not an easy task. Food reformulation is normally done by altering the proportion of basic ingredients or by adding new minor ingredients. In general, the texture varies concomitantly with these changes, altering the way the food is processed orally and the complete eating experience. This highlights the interest of discovering how variations in minor ingredients influence texture and how this affects the dynamics of the oral trajectory. Six cheese pie formulations were prepared: basic recipe (Base), no egg (-Egg), no corn starch (-Corn starch) no sugar (-Sugar), added diary cream (+Cream) and extra skimmed milk powder (+Milk powder). Temporal dominance of sensations was used to show that the appearance and disappearance of each texture sensation dominance experienced in the mouth during the eating process differed among the six pies, as did their relation to the consumers' expectation of satiating capacity scores and to the changes in composition. Two extreme behaviors were found: suppression of egg/addition of extra milk powder made the pies initially drier and harder, while suppression of corn starch/addition of cream gave the samples a soft, moist early sensation. The former elicited higher expectations of satiating capacity. In addition, overall liking, liking evolving with time (dynamic liking) and the level of several key texture attributes' divergence from those of an "ideal" cheese pie were evaluated on bipolar just-about-right scales and through penalty analysis to gain insights into potential directions for reformulating acceptable pies.

Crystallization and preliminary X-ray diffraction studies of aSFP, a bovine seminal plasma protein with a single CUB domain architecture.

Bovine acidic seminal fluid protein (aSFP) is a 1.29 kDa polypeptide of the spermadhesin family built by a single CUB domain architecture. The CUB domain is an extracellular module present in 16 functionally diverse proteins. To determine the three-dimensional structure of aSFP, the protein was crystallized at 21 degrees C by vapor diffusion in hanging drops, using ammonium sulfate, pH 4.7, and polyethyleneglycol 4,000 as precipitants, containing 10% dioxane to avoid the formation of clustered crystals. Elongated prismatic crystals with maximal size of 0.6 x 0.3 x 0.2 mm3 diffract to beyond 1.9 A resolution and belong to space group P2(1)2(1)2(1), with cell parameters a = 52.4 A, b = 41.5 A, c = 48.2 A. There is one aSFP molecule per asymmetric unit, which corresponds to a crystal volume per unit molecular mass of 2.04 A3/Da, and analytical ultracentrifugation analysis show that aSFP is a monomeric protein.