The P-body component DECAPPING5 and the floral repressor SISTER OF FCA regulate FLOWERING LOCUS C transcription in Arabidopsis.

Flowering is the transition from vegetative to reproductive growth and is critical for plant adaptation and reproduction. FLOWERING LOCUS C (FLC) plays a central role in flowering time control, and dissecting its regulation mechanism provides essential information for crop improvement. Here, we report that DECAPPING5 (DCP5), a component of processing bodies (P-bodies), regulates FLC transcription and flowering time in Arabidopsis (Arabidopsis thaliana). DCP5 and its interacting partner SISTER OF FCA (SSF) undergo liquid-liquid phase separation (LLPS) that is mediated by their prion-like domains (PrDs). Enhancing or attenuating the LLPS of both proteins using transgenic methods greatly affects their ability to regulate FLC and flowering time. DCP5 regulates FLC transcription by modulating RNA polymerase II enrichment at the FLC locus. DCP5 requires SSF for FLC regulation, and loss of SSF or its PrD disrupts DCP5 function. Our results reveal that DCP5 interacts with SSF, and the nuclear DCP5-SSF complex regulates FLC expression at the transcriptional level.

Prolonged myelin deficits contribute to neuron loss and functional impairments after ischaemic stroke.

Ischaemic stroke causes neuron loss and long-term functional deficits. Unfortunately, effective approaches to preserving neurons and promoting functional recovery remain unavailable. Oligodendrocytes, the myelinating cells in the CNS, are susceptible to oxygen and nutrition deprivation and undergo degeneration after ischaemic stroke. Technically, new oligodendrocytes and myelin can be generated by the differentiation of oligodendrocyte precursor cells (OPCs). However, myelin dynamics and their functional significance after ischaemic stroke remain poorly understood. Here, we report numerous denuded axons accompanied by decreased neuron density in sections from ischaemic stroke lesions in human brain, suggesting that neuron loss correlates with myelin deficits in these lesions. To investigate the longitudinal changes in myelin dynamics after stroke, we labelled and traced pre-existing and newly-formed myelin, respectively, using cell-specific genetic approaches. Our results indicated massive oligodendrocyte death and myelin loss 2 weeks after stroke in the transient middle cerebral artery occlusion (tMCAO) mouse model. In contrast, myelin regeneration remained insufficient 4 and 8 weeks post-stroke. Notably, neuronal loss and functional impairments worsened in aged brains, and new myelin generation was diminished. To analyse the causal relationship between remyelination and neuron survival, we manipulated myelinogenesis by conditional deletion of Olig2 (a positive regulator) or muscarinic receptor 1 (M1R, a negative regulator) in OPCs. Deleting Olig2 inhibited remyelination, reducing neuron survival and functional recovery after tMCAO. Conversely, enhancing remyelination by M1R conditional knockout or treatment with the pro-myelination drug clemastine after tMCAO preserved white matter integrity and neuronal survival, accelerating functional recovery. Together, our findings demonstrate that enhancing myelinogenesis is a promising strategy to preserve neurons and promote functional recovery after ischaemic stroke.

SISTER OF FCA physically associates with SKB1 to regulate flowering time in Arabidopsis thaliana.

BACKGROUND: Proper flowering time is important for the growth and development of plants, and both too early and too late flowering impose strong negative influences on plant adaptation and seed yield. Thus, it is vitally important to study the mechanism underlying flowering time control in plants. In a previous study by the authors, genome-wide association analysis was used to screen the candidate gene SISTER OF FCA (SSF) that regulates FLOWERING LOCUS C (FLC), a central gene encoding a flowering suppressor in Arabidopsis thaliana. RESULTS: SSF physically interacts with Protein arginine methyltransferase 5 (PRMT5, SKB1). Subcellular co-localization analysis showed that SSF and SKB1 interact in the nucleus. Genetically, SSF and SKB1 exist in the same regulatory pathway that controls FLC expression. Furthermore, RNA-sequencing analysis showed that both SSF and SKB1 regulate certain common pathways. CONCLUSIONS: This study shows that PRMT5 interacts with SSF, thus controlling FLC expression and facilitating flowering time control.

Loss-of-function of LIGULELESS1 activates the jasmonate pathway and promotes maize resistance to corn leaf aphids.

Corn leaf aphids (Rhopalosiphum maidis) are highly destructive pests of maize (Zea mays) that threaten growth and seed yield, but resources for aphid resistance are scarce. Here, we identified an aphid-resistant maize mutant, resistance to aphids 1 (rta1), which is allelic to LIGULELESS1 (LG1). We confirmed LG1's role in aphid resistance using the independent allele lg1-2, allelism tests and LG1 overexpression lines. LG1 interacts with, and increases the stability of ZINC-FINGER PROTEIN EXPRESSED IN INFLORESCENCE MERISTEM (ZIM1), a central component of the jasmonic acid (JA) signalling pathway, by disturbing its interaction with the F-box protein CORONATINE INSENSITIVE 1a (COI1a). Natural variation in the LG1 promoter was associated with aphid resistance among inbred lines. Moreover, a loss-of-function mutant in the LG1-related gene SPL8 in the dicot Arabidopsis thaliana conferred aphid resistance. This study revealed the aphid resistance mechanism of lg1, providing a theoretical basis and germplasm for breeding aphid-resistant crops.

Polymer-Based Room-Temperature Phosphorescence Materials Exhibiting Emission Lifetimes up to 4.6 s under Ambient Conditions.

The long-emission-lifetime nature of room-temperature phosphorescence (RTP) materials lays the foundation of their applications in diverse areas. Despite the advantage of mechanical property, processability and solvent dispersity, the emission lifetimes of polymer-based room-temperature phosphorescence materials remain not particularly long because of the labile nature of organic triplet excited states under ambient conditions. Specifically, ambient phosphorescence lifetime (τP) longer than 2 s and even 4 s have rarely been reported in polymer systems. Here, luminescent compounds with small phosphorescence rate on the order of approximately 10-1 s-1 are designed, ethylene-vinyl alcohol copolymer (EVOH) as polymer matrix and antioxidant 1010 to protect organic triplets are employed, and ultralong phosphorescence lifetime up to 4.6 s under ambient conditions by short-term and low-power excitation are achieved. The resultant materials exhibit high afterglow brightness, long afterglow duration, excellent processability into large area thin films, high transparency and thermal stability, which display promising anticounterfeiting and data encryption functions.

The reporting checklist for Chinese patent medicine guidelines: RIGHT for CPM.

Existing reporting checklists lack the necessary level of detail and comprehensiveness to be used in guidelines on Chinese patent medicines (CPM). This study aims to develop a reporting guidance for CPM guidelines based on the Reporting Items of Practice Guidelines in Healthcare (RIGHT) statement. We extracted information from CPM guidelines, existing reporting standards for traditional Chinese medicine (TCM), and the RIGHT statement and its extensions to form the initial pool of reporting items for CPM guidelines. Seventeen experts from diverse disciplines participated in two rounds of Delphi process to refine and clarify the items. Finally, 18 authoritative consultants in the field of TCM and reporting guidelines reviewed and approved the RIGHT for CPM checklist. We added 16 new items and modified two items of the original RIGHT statement to form the RIGHT for CPM checklist, which contains 51 items grouped into seven sections and 23 topics. The new and revised items are distributed across four sections (Basic information, Background, Evidence, and Recommendations) and seven topics: title/subtitle (one new and one revised item), Registration information (one new item), Brief description of the health problem (four new items), Guideline development groups (one revised item), Health care questions (two new items), Recommendations (two new items), and Rationale/explanation for recommendations (six new items). The RIGHT for CPM checklist is committed to providing users with guidance for detailed, comprehensive and transparent reporting, and help practitioners better understand and implement CPM guidelines.

Dynamic Virtual Fixture Generation Based on Intra-Operative 3D Image Feedback in Robot-Assisted Minimally Invasive Thoracic Surgery.

This paper proposes a method for generating dynamic virtual fixtures with real-time 3D image feedback to facilitate human-robot collaboration in medical robotics. Seamless shared control in a dynamic environment, like that of a surgical field, remains challenging despite extensive research on collaborative control and planning. To address this problem, our method dynamically creates virtual fixtures to guide the manipulation of a trocar-placing robot arm using the force field generated by point cloud data from an RGB-D camera. Additionally, the "view scope" concept selectively determines the region for computational points, thereby reducing computational load. In a phantom experiment for robot-assisted port incision in minimally invasive thoracic surgery, our method demonstrates substantially improved accuracy for port placement, reducing error and completion time by 50% (p=1.06×10-2) and 35% (p=3.23×10-2), respectively. These results suggest that our proposed approach is promising in improving surgical human-robot collaboration.

The plant terpenes DMNT and TMTT function as signaling compounds that attract Asian corn borer (Ostrinia furnacalis) to maize plants.

During their co-evolution with herbivorous insects, plants have developed multiple defense strategies that resist pests, such as releasing a blend of herbivory-induced plant volatiles (HIPVs) that repel pests or recruit their natural enemies. However, the responses of insects to HIPVs in maize (Zea mays L.) are not well understood. Here, we demonstrate that the Asian corn borer (ACB, Ostrinia furnacalis), a major insect pest of maize, shows a preference for maize pre-infested with ACB larvae rather than being repelled by these plants. Through combined transcriptomic and metabolomics analysis of ACB-infested maize seedlings, we identified two substances that explain this behavior: (E)-4,8-dimethylnona-1,3,7-triene (DMNT) and (3E,7E)-4,8,12-trimethyltrideca-1,3,7,11-tetraene (TMTT). DMNT and TMTT attracted ACB larvae, and knocking out the maize genes responsible for their biosynthesis via gene editing impaired this attraction. External supplementation with DMNT/TMTT hampered the larvae's ability to locate pre-infested maize. These findings uncover a novel role for DMNT and TMTT in driving the behavior of ACB. Genetic modification of maize to make it less detectable by ACB might be an effective strategy for developing maize germplasm resistant to ACB and for managing this pest effectively in the field.

Inactivation of RPX1 in Arabidopsis confers resistance to Plutella xylostella through the accumulation of the homoterpene DMNT.

The lepidopteran crop pest Plutella xylostella causes severe constraints on Brassica cultivation. Here, we report a novel role for RPX1 (resistance to P. xylostella) in resistance to this pest in Arabidopsis thaliana. The rpx1-1 mutant repels P. xylostella larvae, and feeding on the rpx1-1 mutant severely damages the peritrophic matrix structure in the midgut of the larvae, thereby negatively affecting larval growth and pupation. This resistance results from the accumulation of defence compounds, including the homoterpene (3E)-4,8-dimethyl-1,3,7-nonatriene (DMNT), due to the upregulation of PENTACYCLIC TRITERPENE SYNTHASE 1 (PEN1), which encodes a key DMNT biosynthetic enzyme. P. xylostella infestation and wounding induce RPX1 protein degradation, which may confer a rapid response to insect infestation. RPX1 inactivation and PEN1 overexpression are not associated with negative trade-offs for plant growth but have much higher seed production than the wild-type in the presence of P. xylostella infestation. This study offers a new strategy for plant molecular breeding against P. xylostella.

Combining quantitative trait locus mapping with multiomics profiling reveals genetic control of corn leaf aphid (Rhopalosiphum maidis) resistance in maize.

The corn leaf aphid (Rhopalosiphum maidis) is a major maize pest that frequently causes substantial yield losses. Exploring the genetic basis of resistance to aphids is important for improving maize yield and quality. Here, we used a maize recombinant inbred line population derived from two parents with different susceptibility to aphids, B73 (susceptible) and Abe2 (resistant), and performed quantitative trait locus (QTL) mapping using aphid resistance scores as an indicator. We mapped a stable QTL, qRTA6, to chromosome 6 using data from 2 years of field trials, which explained 40.12-55.17% of the phenotypic variation. To further investigate the mechanism of aphid resistance in Abe2, we constructed transcriptome and metabolome libraries from Abe2 and B73 leaves with or without aphid infestation at different time points. Integrating QTL mapping and transcriptome data revealed three aphid resistance candidate genes (Zm00001d035736, Zm00001d035751, and Zm00001d035767) associated with the hypersensitive response, the jasmonic acid pathway, and protein ubiquitination. Integrated transcriptomic and metabolomic analysis revealed that the differentially expressed genes and metabolites were enriched in flavonoid biosynthesis. These findings extend our understanding of the molecular mechanisms controlling aphid resistance in maize, and the QTL and candidate genes are valuable resources for increasing this resistance.

Linkage mapping combined with GWAS revealed the genetic structural relationship and candidate genes of maize flowering time-related traits.

BACKGROUND: Flowering time is an important agronomic trait of crops and significantly affects plant adaptation and seed production. Flowering time varies greatly among maize (Zea mays) inbred lines, but the genetic basis of this variation is not well understood. Here, we report the comprehensive genetic architecture of six flowering time-related traits using a recombinant inbred line (RIL) population obtained from a cross between two maize genotypes, B73 and Abe2, and combined with genome-wide association studies to identify candidate genes that affect flowering time. RESULTS: Our results indicate that these six traits showed extensive phenotypic variation and high heritability in the RIL population. The flowering time of this RIL population showed little correlation with the leaf number under different environmental conditions. A genetic linkage map was constructed by 10,114 polymorphic markers covering the whole maize genome, which was applied to QTL mapping for these traits, and identified a total of 82 QTLs that contain 13 flowering genes. Furthermore, a combined genome-wide association study and linkage mapping analysis revealed 17 new candidate genes associated with flowering time. CONCLUSIONS: In the present study, by using genetic mapping and GWAS approaches with the RIL population, we revealed a list of genomic regions and candidate genes that were significantly associated with flowering time. This work provides an important resource for the breeding of flowering time traits in maize.

Joint QTL mapping and transcriptome sequencing analysis reveal candidate flowering time genes in Brassica napus L.

BACKGROUND: Optimum flowering time is a key agronomic trait in Brassica napus. To investigate the genetic architecture and genetic regulation of flowering time in this important crop, we conducted quantitative trait loci (QTL) analysis of flowering time in a recombinant inbred line (RIL) population, including lines with extreme differences in flowering time, in six environments, along with RNA-Seq analysis. RESULTS: We detected 27 QTLs distributed on eight chromosomes among six environments, including one major QTL on chromosome C02 that explained 11-25% of the phenotypic variation and was stably detected in all six environments. RNA-Seq analysis revealed 105 flowering time-related differentially expressed genes (DEGs) that play roles in the circadian clock/photoperiod, autonomous pathway, and hormone and vernalization pathways. We focused on DEGs related to the regulation of flowering time, especially DEGs in QTL regions. CONCLUSIONS: We identified 45 flowering time-related genes in these QTL regions, eight of which are DEGs, including key flowering time genes PSEUDO RESPONSE REGULATOR 7 (PRR7) and FY (located in a major QTL region on C02). These findings provide insights into the genetic architecture of flowering time in B. napus.

Genome-wide exploration and characterization of miR172/euAP2 genes in Brassica napus L. for likely role in flower organ development.

BACKGROUND: APETALA2-like genes encode plant-specific transcription factors, some of which possess one microRNA172 (miR172) binding site. The miR172 and its target euAP2 genes are involved in the process of phase transformation and flower organ development in many plants. However, the roles of miR172 and its target AP2 genes remain largely unknown in Brassica napus (B. napus). RESULTS: In this study, 19 euAP2 and four miR172 genes were identified in the B. napus genome. A sequence analysis suggested that 17 euAP2 genes were targeted by Bna-miR172 in the 3' coding region. EuAP2s were classified into five major groups in B.napus. This classification was consistent with the exon-intron structure and motif organization. An analysis of the nonsynonymous and synonymous substitution rates revealed that the euAP2 genes had gone through purifying selection. Whole genome duplication (WGD) or segmental duplication events played a major role in the expansion of the euAP2 gene family. A cis-regulatory element (CRE) analysis suggested that the euAP2s were involved in the response to light, hormones, stress, and developmental processes including circadian control, endosperm and meristem expression. Expression analysis of the miR172-targeted euAP2s in nine different tissues showed diverse spatiotemporal expression patterns. Most euAP2 genes were highly expressed in the floral organs, suggesting their specific functions in flower development. BnaAP2-1, BnaAP2-5 and BnaTOE1-2 had higher expression levels in late-flowering material than early-flowering material based on RNA-seq and qRT-PCR, indicating that they may act as floral suppressors. CONCLUSIONS: Overall, analyses of the evolution, structure, tissue specificity and expression of the euAP2 genes were peformed in B.napus. Based on the RNA-seq and experimental data, euAP2 may be involved in flower development. Three euAP2 genes (BnaAP2-1, BnaAP2-5 and BnaTOE1-2) might be regarded as floral suppressors. The results of this study provide insights for further functional characterization of the miR172 /euAP2 module in B.napus.

Genome-Wide Identification of the LAC Gene Family and Its Expression Analysis Under Stress in Brassica napus.

Lignin is an important biological polymer in plants that is necessary for plant secondary cell wall ontogenesis. The laccase (LAC) gene family catalyzes lignification and has been suggested to play a vital role in the plant kingdom. In this study, we identified 45 LAC genes from the Brassica napus genome (BnLACs), 25 LAC genes from the Brassica rapa genome (BrLACs) and 8 LAC genes from the Brassica oleracea genome (BoLACs). These LAC genes could be divided into five groups in a cladogram and members in same group had similar structures and conserved motifs. All BnLACs contained hormone- and stress- related elements determined by cis-element analysis. The expression of BnLACs was relatively higher in the root, seed coat and stem than in other tissues. Furthermore, BnLAC4 and its predicted downstream genes showed earlier expression in the silique pericarps of short silique lines than long silique lines. Three miRNAs (miR397a, miR397b and miR6034) target 11 BnLACs were also predicted. The expression changes of BnLACs under series of stresses were further investigated by RNA sequencing (RNA-seq) and quantitative real-time polymerase chain reaction (qRT-PCR). The study will give a deeper understanding of the LAC gene family evolution and functions in B. napus.

Combined QTL mapping, physiological and transcriptomic analyses to identify candidate genes involved in Brassica napus seed aging.

Seed aging is an inevitable problem in the germplasm conservation of oil crops. Thus, clarifying the genetic mechanism of seed aging is important for rapeseed breeding. In this study, Brassica napus seeds were exposed to an artificial aging environment (40 °C and 90% relative humidity). Using a population of 172 recombinant inbred lines, 13 QTLs were detected on 8 chromosomes, which explained ~ 9.05% of the total phenotypic variation. The QTLs q2015AGIA-C08 and q2016AGI-C08-2 identified in the two environments were considered the same QTL. After artificial aging, lower germination index, increased relative electrical conductivity, malondialdehyde and proline content, and reduced soluble sugar, protein content and antioxidant enzyme activities were detected. Furthermore, seeds of extreme lines that were either left untreated (R0 and S0) or subjected to 15 days of artificial aging (R15 and S15) were used for transcriptome sequencing. In total, 2843, 1084, 429 and 1055 differentially expressed genes were identified in R15 vs. R0, S15 vs. S0, R0 vs. S0 and R15 vs. S15, respectively. Through integrated QTL mapping and RNA-sequencing analyses, seven genes, such as BnaA03g37460D, encoding heat shock transcription factor C1, and BnaA03g40360D, encoding phosphofructokinase 4, were screened as candidate genes involved in seed aging. Further researches on these candidate genes could broaden our understanding of the regulatory mechanisms of seed aging.

Reporting guidelines for traditional Chinese medicine could be improved: a cross-sectional study.

OBJECTIVES: The aim of this study is to identify available reporting guidelines for traditional Chinese medicine (TCM), delineate their fundamental characteristics, assess the scientific rigor of their development process, and evaluate their dissemination. STUDY DESIGN AND SETTING: A search was conducted in Medline (via PubMed), China National Knowledge Infrastructure (CNKI), SinoMed, WANFANG DATA, and the EQUATOR Network to identify TCM reporting guidelines. A preprepared Excel database was used to extract information on the basic characteristics, development process, and dissemination information. The development process quality of TCM reporting guidelines was assessed by evaluating their compliance with the Guidance for Developers of Health Research Reporting Guidelines (GDHRRG). The extent of dissemination of these guidelines was analyzed by examining the number of citations received. RESULTS: A total of 26 reporting guidelines for TCM were obtained from 20 academic journals, with 61.5% of them published in English journals. Among the guidelines, 14 (53.8%) were registered in the EQUATOR Network. On average, the compliance rate of GDHRRG guidelines was reported to be 63.3% ranging from 22.2% to 94.4%. Three steps showed poor compliance, namely guideline endorsement (23.1%), translated guidelines (19.2%), and developing a publication strategy (19.2%). Furthermore, the compliance rate of GDHRRG guidelines published in English journals was higher than that in Chinese journals. In terms of the dissemination, 15.4% of the guidelines had been cited over 100 times, while 73.1% had been cited less than 50 times. CONCLUSION: The development of TCM reporting guidelines still has limitations in terms of regarding scientific rigor and follow-up dissemination. Therefore, it is important to ensure adherence to the scientific process in the development of TCM reporting guidelines and to strengthen their promotion, dissemination, and implementation.

Visualizing temperature inhomogeneity using thermo-responsive smart materials.

Despite the substantial progress made, the responsiveness of thermo-responsive materials upon various thermal fields is still restricted to monochromatic visualization with single-wavelength light emission. This stems from a poor understanding of the photophysical processes within the materials and the unvarying optical performance of luminescent centers' response to various ambient temperatures. Conventional techniques to assess the inhomogeneities of thermal fields can be time-consuming, require specialized equipment and suffer from inaccuracy due to the inevitable interference from background signals, especially at high temperature. To this end, we overcome these limitations for the first time, to flexibly visualize temperature inhomogeneities by developing a thermochromic smart material, SrGa12-xAlxO19:Dy3+. Two distinct modes of thermochromic properties (steady-state temperature-dependent luminescence and thermally stimulated luminescence) are investigated. It is revealed that the abundant colors (from yellow, green to red) and amazing color-changing features are due to the superior optical integration of the host (SrGa12-xAlxO19) and dopant (Dy3+) emissions under specific thermal stimulations. We suggest that this thermo-responsive smart material can be used to realize highly efficient and simple visualization of invisible thermal distribution in industry and beyond.

Structural modification of (3E)-4,8-dimethyl-1,3,7-nontriene enhances its ability to kill Plutella xylostella insect pests.

BACKGROUND: Plant secondary metabolites and their modified derivatives play an important role in the discovery and development of novel insecticides. The natural plant product (3E)-4,8-dimethyl-1,3,7-nontriene (DMNT) has been proven to be able to effectively repel and kill the lepidopteran insect pest Plutella xylostella. RESULTS: In this study, four oxygenated derivatives of DMNT were synthesized by allylic hydroxylation and subsequent etherification or esterification. Bioassays on P. xylostella larvae showed that the compounds DMNT-OCH3 (2), DMNT-OCy (3) and DMNT-OAc (4) were more toxic to the larvae than DMNT alone. The most pronounced effect was observed for compound 2, which showed a 22.23% increase in lethality at a concentration of 0.25 µm. Moreover, the peritrophic matrix (PM) barrier in the insect midgut was more severely damaged by compounds 2, 3 and 4 than by DMNT. The median lethal concentration (LC50 , 48 h) of compounds 2, 3 and 4 on P. xylostella was determined to be 0.98, 1.13 and 1.11 mg mL-1 , respectively, which is much lower than the commercial insecticides eucalyptol (2.89 mg mL-1 ) and thymol (2.45 mg mL-1 ). CONCLUSION: These results suggested that oxygenated DMNT derivatives offer a significantly improved killing effect over DMNT on P. xylostella. This work has provided a basis for further design, structural modification and development of DMNT as botanical insecticides. © 2023 Society of Chemical Industry.

A facile approach for hierarchical architectures of an enzyme-metal-organic framework biocatalyst with high activity and stability.

Enzyme-incorporated composites with hierarchical porous structures can lead to improved performance of hybrid biocatalysts. Metal-organic frameworks (MOFs) have recently emerged as excellent biomineralizable materials for forming hybrid biocatalysts, offering superior performance for biocatalytic reactions. However, the small nanopores of MOFs significantly reduce the diffusion rates of small substrate molecules, hindering the contact between the inner active sites of an enzyme and the molecules, lowering the biocatalytic efficiency. Here, we used a solution-phase self-assembly method for preparing macroporous hierarchical porous architectures of a copper 5-(ethylthio)-1H-tetrazole [Cu(ett)] MOF, the distorted tetrahedral coordination geometry of which is favourable for producing macropores. Notably, the formation of [Cu(ett)] MOF hybrid biocatalysts is achieved via an in situ mineralization of enzymes, but without changes in the hierarchical porous structure. These properties lead to excellent catalytic activities as they decrease the inherent barriers to accelerate the diffusion rate of reactants. Moreover, the developed hierarchical porous MOFs demonstrated outstanding tolerance to inhospitable surroundings and favourable storage stability at room temperature.

Preference Test of Plutella xylostella Larvae upon DMNT Treatment.

We describe a method to test the preference of insects in response to (3E)-4,8-dimethyl-1,3,7-nonatriene (DMNT). We use a device that includes a horizontal glass tube, two grooves (with activated carbon), air flow, rubber stoppers/tubes, transparent glass containers (optional), and a holder for the glass tube (optional). Equal amounts of activated carbon in the groove (removable) are placed at both ends to avoid air contamination. The air flow is generated by an air pump. In the closed device, different samples are placed at each end of the glass tube. The air pump at the top of the glass tube forms an air flow that converges to the middle site of the glass tube. In each test, insect larvae are located in the middle of the glass test tube. If the test samples release DMNT that can be sensed by insects, the insects will selectively move to one specific end of the glass tube. The number of insects that move to each end will be recorded for further studies. This method can also be used to test the preference of insects in response to other volatile compounds.