Siderophore-mediated iron transport: crystal structure of FhuA with bound lipopolysaccharide.

FhuA, the receptor for ferrichrome-iron in Escherichia coli, is a member of a family of integral outer membrane proteins, which, together with the energy-transducing protein TonB, mediate the active transport of ferric siderophores across the outer membrane of Gram-negative bacteria. The three-dimensional structure of FhuA is presented here in two conformations: with and without ferrichrome-iron at resolutions of 2.7 and 2.5 angstroms, respectively. FhuA is a beta barrel composed of 22 antiparallel beta strands. In contrast to the typical trimeric arrangement found in porins, FhuA is monomeric. Located within the beta barrel is a structurally distinct domain, the "cork," which mainly consists of a four-stranded beta sheet and four short alpha helices. A single lipopolysaccharide molecule is noncovalently associated with the membrane-embedded region of the protein. Upon binding of ferrichrome-iron, conformational changes are transduced to the periplasmic pocket of FhuA, signaling the ligand-loaded status of the receptor. Sequence homologies and mutagenesis data are used to propose a structural mechanism for TonB-dependent siderophore-mediated transport across the outer membrane.

Molecular architecture and electrostatic properties of a bacterial porin.

The integral membrane protein porin from Rhodobacter capsulatus consists of three tightly associated 16-stranded beta barrels that give rise to three distinct diffusion channels for small solutes through the outer membrane. The x-ray structure of this porin has revealed details of its shape, the residue distributions within the pore and at the membrane-facing surface, and the location of calcium sites. The electrostatic potential has been calculated and related to function. Moreover, potential calculations were found to predict the Ca2+ sites.

Structural basis of light harvesting by carotenoids: peridinin-chlorophyll-protein from Amphidinium carterae.

Peridinin-chlorophyll-protein, a water-soluble light-harvesting complex that has a blue-green absorbing carotenoid as its main pigment, is present in most photosynthetic dinoflagellates. Its high-resolution (2.0 angstrom) x-ray structure reveals a noncrystallographic trimer in which each polypeptide contains an unusual jellyroll fold of the alpha-helical amino- and carboxyl-terminal domains. These domains constitute a scaffold with pseudo-twofold symmetry surrounding a hydrophobic cavity filled by two lipid, eight peridinin, and two chlorophyll a molecules. The structural basis for efficient excitonic energy transfer from peridinin to chlorophyll is found in the clustering of peridinins around the chlorophylls at van der Waals distances.

Crystal structure of Omp32, the anion-selective porin from Comamonas acidovorans, in complex with a periplasmic peptide at 2.1 A resolution.

BACKGROUND: Porins provide diffusion channels for salts and small organic molecules in the outer membrane of bacteria. In OmpF from Escherichia coli and related porins, an electrostatic field across the channel and a potential, originating from a surplus of negative charges, create moderate cation selectivity. Here, we investigate the strongly anion-selective porin Omp32 from Comamonas acidovorans, which is closely homologous to the porins of pathogenic Bordetella and Neisseria species. RESULTS: The crystal structure of Omp32 was determined to a resolution of 2.1 A using single isomorphous replacement with anomalous scattering (SIRAS). The porin consists of a 16-stranded beta barrel with eight external loops and seven periplasmic turns. Loops 3 and 8, together with a protrusion located within beta-strand 2, narrow the cross-section of the pore considerably. Arginine residues create a charge filter in the constriction zone and a positive surface potential at the external and periplasmic faces. One sulfate ion was bound to Arg38 in the channel constriction zone. A peptide of 5.8 kDa appeared bound to Omp32 in a 1:1 stoichiometry on the periplasmic side close to the symmetry axis of the trimer. Eight amino acids of this peptide could be identified, revealing specific interactions with beta-strand 1 of the porin. CONCLUSIONS: The Omp32 structure explains the strong anion selectivity of this porin. Selectivity is conferred by a positive potential, which is not attenuated by negative charges inside the channel, and by an extremely narrow constriction zone. Moreover, Omp32 represents the anchor molecule for a peptide which is homologous to proteins that link the outer membrane to the cell wall peptidoglycan.

A conserved structural motif for lipopolysaccharide recognition by procaryotic and eucaryotic proteins.

BACKGROUND: Lipopolysaccharide (LPS), a lipoglycan from the outer membrane of Gram-negative bacteria, is an immunomodulatory molecule that stimulates the innate immune response. High levels of LPS cause excessive release of inflammatory mediators and are responsible for the septic shock syndrome. The interaction of LPS with its cognate binding proteins has not, as yet, been structurally elucidated. RESULTS: The X-ray crystallographic structure of LPS in complex with the integral outer membrane protein FhuA from Escherichia coli K-12 is reported. It is in accord with data obtained using mass spectroscopy and nuclear magnetic resonance. Most of the important hydrogen-bonding or electrostatic interactions with LPS are provided by eight positively charged residues of FhuA. Residues in a similar three-dimensional arrangement were searched for in all structurally known proteins using a fast template-matching algorithm, and a subset of four residues was identified that is common to known LPS-binding proteins. CONCLUSIONS: These four residues, three of which form specific interactions with lipid A, appear to provide the structural basis of pattern recognition in the innate immune response. Their arrangement can serve to identify LPS-binding sites on proteins known to interact with LPS, and could serve as a template for molecular modeling of a LPS scavenger designed to reduce the septic shock syndrome.

Active transport of an antibiotic rifamycin derivative by the outer-membrane protein FhuA.

BACKGROUND: FhuA, an integral membrane protein of Escherichia coli, actively transports ferrichrome and the structurally related antibiotic albomycin across the outer membrane. The transport is coupled to the proton motive force, which energizes FhuA through the inner-membrane protein TonB. FhuA also transports the semisynthetic rifamycin derivative CGP 4832, although the chemical structure of this antibiotic differs markedly from that of ferric hydroxamates. RESULTS: X-ray crystallography revealed that rifamycin CGP 4832 occupies the same ligand binding site as ferrichrome and albomycin, thus demonstrating a surprising lack of selectivity. However, the binding of rifamycin CGP 4832 is deviant from the complexes of FhuA with hydroxamate-type ligands in that it does not result in the unwinding of the switch helix but only in its destabilization, as reflected by increased B factors. Unwinding of the switch helix is proposed to be required for efficient binding of TonB to FhuA and for coupling the proton motive force of the cytoplasmic membrane with energy-dependent ligand transport. The transport data from cells expressing mutant FhuA proteins indicated conserved structural and mechanistic requirements for the transport of both types of compounds. CONCLUSIONS: We conclude that the binding of rifamycin CGP 4832 destabilizes the switch helix and promotes the formation of a transport-competent FhuA-TonB complex, albeit with lower efficiency than ferrichrome. Active transport of this rifamycin derivative explains the 200-fold increase in potency as compared to rifamycin, which is not a FhuA-specific ligand and permeates across the cell envelope by passive diffusion only.

Molecular and crystal structure of an amphiphile: 4'-propoxybiphenyl-4-methyl-N,N-dimethylamineoxide dihydrate.

A novel amphiphile, 4'-propoxybiphenyl-4-methyl-N,N-dimethylamineoxide, has been synthesized, crystallized (P2(1)/a, a = 9.084 A, b = 8.911 A, c = 22.460 A, beta = 96.224 degrees) and its crystal structure was determined. The amphiphile forms a bilayer in which the amineoxide oxygen of each molecule binds two water molecules. In the hydrophobic part of the bilayer the biphenyls form edge-to-face contacts, in the polar layer there is a hydrogen bonding network. The potential use of the compound as a detergent for membrane proteins has been demonstrated and the relevance of the amineoxide hydrate for other detergents discussed.

Evaluation of the electron density profile of the frog rod outer segment disc-membrane in vivo using x-ray diffraction.

The structure of the rod outer segment disc-membrane in vivo was studied by X-ray low-angle scattering. The experiments were made on frogs under narcosis. Diffraction patterns corresponding to a resolution of 1.5 nm could be obtained from the membrane stacks of the rod outer segment discs. For the analysis of the measured diffraction pattern a new special computer procedure was elaborated. Among other generalizations of the theory, it was taken into account that the electron densities in the inter- and intra-disc spaces differ from the mean electron density of the whole stack. The consideration of this possibility, together with an exact experimental measurement of the isotrope background scattering, led to a mathematically unique solution. The calculated electron density profile apparently is a distinct asymmetric bilayer. The electron density of the side of the membrane which is in contact with the disc lumen is higher than the electron density on the side in contact with the cytoplasm. Therefore, a localization of rhodopsin or of other high molecular proteins mainly on the cytoplasmatic edge of the membrane can be excluded for the rod outer segment discs in vivo.

Influence of the lipid matrix on incorporation and function of LPS-free porin from Paracoccus denitrificans.

We have studied the role of lipopolysaccharide (LPS) for the insertion of LPS-free porin from Paracoccus denitrificans into planar lipid bilayers and its function therein. For this, we reconstituted the porin into different asymmetric planar lipid bilayers with or without LPS and into symmetric phospholipid bilayers. LPS-free porin added to the various bilayer systems was found to induce a step-wise increase in membrane conductance with different incorporation rates, depending on the presence of LPS in the bilayer leaflet opposite to porin addition. The incorporation rate into asymmetric LPS/phospholipid membranes from the phospholipid side was more than 10-fold higher than that observed for pure phospholipid membranes. The porin formed general diffusion pores without any salt specificity. The mean single-channel conductance did not depend on the presence of LPS and was about 4.2 nS for a subphase containing 1 M KCl in all systems tested. At certain applied transmembrane voltages, which depended on membrane composition and were approximately greater than 100 mV for the LPS/phospholipid system, single-channel closing in three steps was observed. Differences in the voltage dependence of porin-channel closing could be correlated with the surface charge of the bilayer. From the voltage-dependent gating behaviour proof for an oriented incorporation of the porin molecules, depending on the side of porin addition, and evidence for their orientation could be derived. Measurements at temperatures above and below the beta<==>alpha phase transition temperature of LPS gave evidence for the influence of membrane rigidity on the gating behaviour.

Stabilization of detergent-solubilized Ca2+-ATPase by poly(ethylene glycol).

The (Ca2+ + Mg2+)-ATPase from sarcoplasmic reticulum (SR) has been solubilized with 1-alkanoyl propanediol-3-phosphorylcholines with chainlengths ranging between 8 and 12 C atoms. A marked dependence of the ATPase activity upon the chainlength was found, indicating that alkyl chainlengths with 12 C atoms are necessary for retention of activity. Addition of poly(ethylene glycol) to the eluting buffers used for gel filtration of the ATPase-detergent micelles was found to increase the activity and the long-term stability significantly. In the presence of Ca2+, the elution volume indicated an ATPase dimer, whereas in the absence of Ca2+ the elution volume indicated a monomeric solution. The purity of the preparations after gel filtration was improved by subsequent chromatography with a hydroxyapatite column.

Prediction of the general structure of OmpF and PhoE from the sequence and structure of porin from Rhodobacter capsulatus. Orientation of porin in the membrane.

By comparing the hydrophilicity profiles and sequences of porin from Rhodobacter capsulatus with those of OmpF and PhoE from Escherichia coli, a set of insertions and deletions for alignment of the sequences has been deduced. With this alignment a similar folding of OmpF and PhoE has been predicted as found by X-ray structure analysis of porin from Rhodobacter capsulates. Furthermore, the orientation of the porin trimer in the outer membrane was inferred from topological data on PhoE. According to this result a single channel of approx. 30 A diameter starts at the outer surface. Near the middle of the outer membrane bilayer this channel branches out into three separate channels, each running within a single porin monomer to the periplasmic surface.

Crystals of an integral membrane protein diffracting to 1.8 A resolution.

A new crystal form of porin from Rhodobacter capsulatus has been obtained. The crystals are rhombohedral, space group R3, with hexagonal axes a = b = 92.3 A, c = 146.2 A. They contain one monomer in the asymmetric unit and diffract to a resolution of at least 1.8 A.

The crystal structure of a liganded trehalose/maltose-binding protein from the hyperthermophilic Archaeon Thermococcus litoralis at 1.85 A.

We report the crystallization and structure determination at 1.85 A of the extracellular, membrane-anchored trehalose/maltose-binding protein (TMBP) in complex with its substrate trehalose. TMBP is the substrate recognition site of the high-affinity trehalose/maltose ABC transporter of the hyperthermophilic Archaeon Thermococcus litoralis. In vivo, this protein is anchored to the membrane, presumably via an N-terminal cysteine lipid modification. The crystallized protein was N-terminally truncated, resulting in a soluble protein exhibiting the same binding characteristics as the wild-type protein. The protein shows the characteristic features of a transport-related, substrate-binding protein and is structurally related to the maltose-binding protein (MBP) of Escherichia coli. It consists of two similar lobes, each formed by a parallel beta-sheet flanked by alpha-helices on both sides. Both are connected by a hinge region consisting of two antiparallel beta-strands and an alpha-helix. As in MBP, the substrate is bound in the cleft between the lobes by hydrogen bonds and hydrophobic interactions. However, compared to maltose binding in MBP, direct hydrogen bonding between the substrate and the protein prevails while apolar contacts are reduced. To elucidate factors contributing to thermostability, we compared TMBP with its mesophilic counterpart MBP and found differences known from similar investigations. Specifically, we find helices that are longer than their structurally equivalent counterparts, and fewer internal cavities.

Crystallization and preliminary X-ray diffraction analysis of ScrY, a specific bacterial outer membrane porin.

The sucrose-specific outer membrane porin ScrY of Salmonella typhimurium was isolated from Escherichia coli K-12 strain KS 26 containing the plasmid pPSO112. The protein was purified to homogeneity by differential extraction of the cell envelope in the presence of the detergents sodium dodecyl sulfate and lauryl (dimethyl)-amine oxide (LDAO). The porin had apparent molecular weights of 58 kDa and 120 kDa for the monomer and for the trimer, respectively, on SDS/PAGE. The purified trimers were crystallized using poly(ethylene glycol) 2000 and the detergents octylglucoside (OG) and hexyl-(dimethyl)-amine oxide (C6DAO). X-ray diffraction of the crystals showed reflections to 2.3 A. The space group of the crystals was R3 and the lattice constants of the hexagonal axes were a = b = 112.85 A and c = 149.9 A. The crystal volume per unit of protein molecular weight was 3.47 A3/Da.

Crystal structure of the effector-binding domain of the trehalose-repressor of Escherichia coli, a member of the LacI family, in its complexes with inducer trehalose-6-phosphate and noninducer trehalose.

The crystal structure of the Escherichia coli trehalose repressor (TreR) in a complex with its inducer trehalose-6-phosphate was determined by the method of multiple isomorphous replacement (MIR) at 2.5 A resolution, followed by the structure determination of TreR in a complex with its noninducer trehalose at 3.1 A resolution. The model consists of residues 61 to 315 comprising the effector binding domain, which forms a dimer as in other members of the LacI family. This domain is composed of two similar subdomains each consisting of a central beta-sheet sandwiched between alpha-helices. The effector binding pocket is at the interface of these subdomains. In spite of different physiological functions, the crystal structures of the two complexes of TreR turned out to be virtually identical to each other with the conformation being similar to those of the effector binding domains of the LacI and PurR in complex with their effector molecules. According to the crystal structure, the noninducer trehalose binds to a similar site as the trehalose portion of trehalose-6-phosphate. The binding affinity for the former is lower than for the latter. The noninducer trehalose thus binds competitively to the repressor. Unlike the phosphorylated inducer molecule, it is incapable of blocking the binding of the repressor headpiece to its operator DNA. The ratio of the concentrations of trehalose-6-phosphate and trehalose thus is used to switch between the two alternative metabolic uses of trehalose as an osmoprotectant and as a carbon source.

An internal affinity-tag for purification and crystallization of the siderophore receptor FhuA, integral outer membrane protein from Escherichia coli K-12.

FhuA (Mr 78,992, 714 amino acids), siderophore receptor for ferrichrome-iron in the outer membrane of Escherichia coli, was affinity tagged, rapidly purified, and crystallized. To obtain FhuA in quantities sufficient for crystallization, a hexahistidine tag was genetically inserted into the fhuA gene after amino acid 405, which resides in a known surface-exposed loop. Recombinant FhuA405.H6 was overexpressed in an E. coli strain that is devoid of several major porins and using metal-chelate chromatography was purified in large amounts to homogeneity. FhuA crystals were grown using the hanging drop vapor diffusion technique and were suitable for X-ray diffraction analysis. On a rotating anode X-ray source, diffraction was observed to 3.0 A resolution. The crystals belong to space group P6(1) or P6(5) with unit cell dimensions of a=b=174 A, c=88 A (alpha=beta=90 degrees, gamma=120 degrees).

Crystal structure of the antibiotic albomycin in complex with the outer membrane transporter FhuA.

One alternative method for drug delivery involves the use of siderophore-antibiotic conjugates. These compounds represent a specific means by which potent antimicrobial agents, covalently linked to iron-chelating siderophores, can be actively transported across the outer membrane of gram-negative bacteria. These "Trojan Horse" antibiotics may prove useful as an efficient means to combat multi-drug-resistant bacterial infections. Here we present the crystallographic structures of the natural siderophore-antibiotic conjugate albomycin and the siderophore phenylferricrocin, in complex with the active outer membrane transporter FhuA from Escherichia coli. To our knowledge, this represents the first structure of an antibiotic bound to its cognate transporter. Albomycins are broad-host range antibiotics that consist of a hydroxamate-type iron-chelating siderophore, and an antibiotically active, thioribosyl pyrimidine moiety. As observed with other hydroxamate-type siderophores, the three-dimensional structure of albomycin reveals an identical coordination geometry surrounding the ferric iron atom. Unexpectedly, this antibiotic assumes two conformational isomers in the binding site of FhuA, an extended and a compact form. The structural information derived from this study provides novel insights into the diverse array of antibiotic moieties that can be linked to the distal portion of iron-chelating siderophores and offers a structural platform for the rational design of hydroxamate-type siderophore-antibiotic conjugates.

X-ray crystallographic and mass spectrometric structure determination and functional characterization of succinylated porin from Rhodobacter capsulatus: implications for ion selectivity and single-channel conductance.

The role of charges near the pore mouth has been discussed in theoretical work about ion channels. To introduce new negative charges in a channel protein, amino groups of porin from Rhodobacter capsulatus 37b4 were succinylated with succinic anhydride, and the precise extent and sites of succinylations and structures of the succinylporins determined by mass spectrometry and X-ray crystallography. Molecular weight and peptide mapping analyses using matrix-assisted laser desorption-ionization mass spectrometry identified selective succinylation of three lysine-epsilon-amino groups (Lys-46, Lys-298, Lys-300) and the N-terminal alpha-amino group. The structure of a tetra-succinylated porin (TS-porin) was determined to 2.4 A and was generally found unchanged in comparison to native porin to form a trimeric complex. All succinylated amino groups found in a mono/di-succinylated porin (MS-porin) and a TS-porin are localized at the inner channel surface and are solvent-accessible: Lys-46 is located at the channel constriction site, whereas Lys-298, Lys-300, and the N-terminus are all near the periplasmic entrance of the channel. The Lys-46 residue at the central constriction loop was modeled as succinyl-lysine from the electron density data and shown to bend toward the periplasmic pore mouth. The electrical properties of the MS-and TS-porins were determined by reconstitution into black lipid membranes, and showed a negative charge effect on ion transport and an increased cation selectivity through the porin channel. The properties of a typical general diffusion porin changed to those of a channel that contains point charges near the pore mouth. The single-channel conductance was no longer a linear function of the bulk aqueous salt concentration. The substantially higher cation selectivity of the succinylated porins compared with the native protein is consistent with the increase of negatively charged groups introduced. These results show tertiary structure-selective modification of charged residues as an efficient approach in the structure-function evaluation of ion channels, and X-ray crystallography and mass spectrometry as complementary analytical tools for defining precisely the chemically modified structures.

Photoactivation of rhodopsin and interaction with transducin in detergent micelles. Effect of 'doping' with steroid molecules.

On detergent-solubilised bovine rhodopsin, we have studied the formation of the active photoproduct, metarhodopsin II (MII), and its interaction with the rod G-protein, transducin (G1). The measured rate of flash-induced MII formation decreases by a factor of 300 from n-dodecyl-beta-D-maltoside (k = 4 x 10(3) at 18 degrees C, pH 6.5), over (3-(lauroyloxy)propyl)-phosphorylcholine (deoxylysolecithin), n-octyl-beta-D-glucopyranoside, sodium cholate to Chapso. For the two last agents, MII formation is similarly slow as in the native disc membrane; however, the micellar system does not display the very large decrease of the rate with lowering temperature, as is characteristic for the membrane. This points to entropic factors determining the rate in the micellar systems. An admixture of rigid steroid molecules (11-deoxycorticosterone) to lysolecithin micelles ('doped micelles') slows MII formation and shifts the MI/MII equilibrium to values typical for detergents of rigid structure. The observation gives further support to the surface free energy concept of MII formation outlined in previous studies. The free adjustment of the MI/MII equilibrium in these doped micelles allows Gt-induced formation of extra-MII to be measured, providing a convenient monitor of rhodopsin-Gt interaction in solution.

The influence of heptane-1,2,3-triol on the size and shape of LDAO micelles. Implications for the crystallisation of membrane proteins.

The presence of small amphiphiles has been found to be necessary in the crystallization of several membrane-protein/surfactant complexes. It has been suggested that the role of the small amphiphile may be to reduce the size of the surfactant belt around the protein, making the formation of crystals easier. Thus far it was not known if this would involve changes in micellar size in general or whether the small amphiphile would merely replace LDAO during crystal growth. In the present study we have used small angle neutron scattering to study mixed micelles of lauryldimethyl amine oxide (LDAO; hydrogenated and deuterated) and heptane-1,2,3-triol (HP). Our results show that with increasing overall HP concentrations mixed LDAO/HP micelles of decreasing mass and radius are formed. The composition of these micelles has been determined. HP thus may decrease the size of the surfactant belt around a protein before crystallisation by insertion into a host micelle. As HP is a 'small amphiphile' compared to the surfactants used for solubilization of membrane proteins, the curvature of the host micelle will be increased by its insertion.