RESUMEN
Certain biomolecules have proven to be difficult to analyze by liquid chromatography (LC), especially under certain chromatographic conditions. The separation of proteins in aqueous mobile phases is one such example because there is the potential for both hydrophobic and ionic secondary interactions to occur with chromatographic hardware to the detriment of peak recovery, peak shape, and the overall sensitivity of the LC analysis. To decrease non-specific adsorption and undesired secondary interactions between column hardware and biomolecules, we have developed and applied a new hydrophilically modified hybrid surface (h-HST) for size exclusion chromatography (SEC) and anion exchange (AEX) separations of proteins and nucleic acids. This surface incorporates additional oxygen and carbon atoms onto an ethylene bridge hybrid siloxane polymer. As a result, it exhibits reduced electrostatic properties and hydrophilicity that facilitates challenging aqueous separations. Flow injection tests with a phosphate buffer showed superior protein recovery from an h-HST frit when compared to unmodified ethylene-bridged hybrid HST, titanium, stainless steel, and PEEK frits. When applied to SEC of rituximab, ramucirumab, and trastuzumab emtansine with a 50 mM ammonium acetate buffer, this new hydrophilic chromatographic hardware yielded improved monomer and aggregate recovery, higher plate numbers, and more symmetrical peaks. AEX columns also benefited from h-HST hardware. An acidic mAb (eculizumab) showed improved recovery, more stable retention, and a sharper peak when eluted from an h-HST versus SS column. Moreover, AEX separations of intact mRNA samples (Cas9 and EPO mRNA) were improved, where it was seen that h-HST column hardware provided higher sensitivity and more repeatable peak areas from injection to injection. As such, there is significant potential in the use of h-HST chromatographic hardware to facilitate more robust and more sensitive analyses for a multitude of challenging separations and analytes.
Asunto(s)
Cromatografía Líquida de Alta Presión , Cromatografía en Gel , Cromatografía Líquida de Alta Presión/métodos , Cromatografía por Intercambio Iónico , Cromatografía Liquida/métodos , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
The pandemic readiness toolbox needs to be extended, targeting different biomolecules, using orthogonal experimental set-ups. Here, we build on our Cov-MS effort using LC-MS, adding SISCAPA technology to enrich proteotypic peptides of the SARS-CoV-2 nucleocapsid (N) protein from trypsin-digested patient samples. The Cov2MS assay is compatible with most matrices including nasopharyngeal swabs, saliva, and plasma and has increased sensitivity into the attomole range, a 1000-fold improvement compared to direct detection in a matrix. A strong positive correlation was observed with qPCR detection beyond a quantification cycle of 30-31, the level where no live virus can be cultured. The automatable sample preparation and reduced LC dependency allow analysis of up to 500 samples per day per instrument. Importantly, peptide enrichment allows detection of the N protein in pooled samples without sensitivity loss. Easily multiplexed, we detect variants and propose targets for Influenza A and B detection. Thus, the Cov2MS assay can be adapted to test for many different pathogens in pooled samples, providing longitudinal epidemiological monitoring of large numbers of pathogens within a population as an early warning system.
Asunto(s)
COVID-19 , SARS-CoV-2 , Humanos , Prueba de COVID-19 , Técnicas de Laboratorio Clínico/métodos , Espectrometría de Masas/métodos , Péptidos , Sensibilidad y EspecificidadRESUMEN
Due to the particular elution mechanism observed with large solutes (e.g., proteins) in liquid chromatography, column length has less impact in controlling their retention compared to small solutes. Moreover, long columns-in theory-just broaden the peaks of large solutes since a great part of the column only acts as void (extra) volume. Such a theory suggests that using very short columns should result in comparable separation quality versus using long columns and make it possible to perform faster (high-throughput) analyses. Therefore, the elution behavior of various therapeutic monoclonal antibodies and their fragments (25-150 kDa) has been investigated using modern instrumentation and column formats. The possibilities offered by narrow-bore columns packed with state-of-the-art 2.7 µm superficially porous particles with 5, 50, 100, and 150 mm lengths have been compared. In particular, the impact of gradient steepness and column length on separation efficiency was evaluated. Using 5 mm × 2.1 mm columns, it has become possible to separate antibody fragments and antibody-drug conjugate species in less than 30 s. Such fast methods can be very useful for high-throughput screening purposes in biopharmaceutical industries.
Asunto(s)
Anticuerpos Monoclonales/aislamiento & purificación , Inmunoconjugados/aislamiento & purificación , Anticuerpos Monoclonales/química , Cromatografía Líquida de Alta Presión , Humanos , Inmunoconjugados/química , Programas InformáticosRESUMEN
Interactions of analytes with metal surfaces in high-performance liquid chromatography (HPLC) instruments and columns have been reported to cause deleterious effects ranging from peak tailing to a complete loss of the analyte signal. These effects are due to the adsorption of certain analytes on the metal oxide layer on the surface of the metal components. We have developed a novel surface modification technology and applied it to the metal components in ultra-HPLC (UHPLC) instruments and columns to mitigate these interactions. A hybrid organic-inorganic surface, based on an ethylene-bridged siloxane chemistry, was developed for use with reversed-phase and hydrophilic interaction chromatography. We have characterized the performance of UHPLC instruments and columns that incorporate this surface technology and compared the results with those obtained using their conventional counterparts. We demonstrate improved performance when using the hybrid surface technology for separations of nucleotides, a phosphopeptide, and an oligonucleotide. The hybrid surface technology was found to result in higher and more consistent analyte peak areas and improved peak shape, particularly when using low analyte mass loads and acidic mobile phases. Reduced abundances of iron adducts in the mass spectrum of a peptide were also observed when using UHPLC systems and columns that incorporate hybrid surface technology. These results suggest that this technology will be particularly beneficial in UHPLC/mass spectrometry investigations of metal-sensitive analytes.
RESUMEN
In the first part of the series, it was demonstrated that very fast (<30 s) separations of therapeutic protein species are feasible using ultra-short (5 × 2.1 mm) columns. In the second part, our purpose was to find the appropriate column length; therefore, a systematic study was performed using various custom-made prototype reversed-phase liquid chromatography (RPLC) columns ranging from 2 to 50 mm lengths. It was found that on a low dispersion ultrahigh-pressure liquid chromatography instrument, columns between 10 and 20 mm were most effective when made with 2.1 mm i.d. tubing. However, with the same LC instrument, 3 mm i.d. columns as short as â¼5 to 10 mm could be effectively used. In both cases, it has been found to be best to keep injection volumes below 0.6 µL, which presents a potential limit to further decreasing column length, given the current capabilities of autosampler instrumentation. The additional volume of the column hardware outside of the packed bed (extra-bed volume) of very small columns is also a limiting factor to decrease the column length. For columns shorter than 10 mm, columns' extra-bed volume was seen to make considerable contributions to band broadening. However, the use of ultra-short columns seemed to be a very useful approach for RPLC of large proteins (>25 kDa) and could also work well for â¼12 kDa as the lowest limit of molecular mass. In summary, a renewed interest in the use of ultra-short columns is warranted, and additional method development will be to the benefit of the biopharmaceutical industry as there is an ever-increasing demand for faster, yet accurate assays (e.g., high-throughput screening) of proteins.
Asunto(s)
Anticuerpos Monoclonales/aislamiento & purificación , Citocromos c/aislamiento & purificación , Anticuerpos Monoclonales/química , Cromatografía Liquida , Cromatografía de Fase Inversa , Citocromos c/química , Humanos , Programas InformáticosRESUMEN
In this article, we propose that silyl ether formation (SEF) is a major contribution to retention and selectivity variation over time for supercritical fluid chromatography (SFC). In the past, the variations were attributed to instrumentation, but high performance SFC systems have shed new light on the source of variation. As silyl ethers form on the particle surface, the hydrophilicity is decreased, significantly altering the retention and selectivity observed. SEF is expected to occur with any chromatographic particle containing silanols but is slowed on hybrid inorganic/organic particles. The SEF reaction is between alcohols on the particle surface and in the mobile phase solvent. We have found that storage conditions of a column are paramount, which can either prevent or accelerate the process. Because SEF exists as an equilibrium between the liquid phase and the particle surface, the process is also reversible. The silanols can be hydroxylated (regenerated) to their original state upon exposure to water. The next generation of stationary phases will either advantageously utilize SEF or effectively mitigate its effects. Mitigation of SEF would be a significant improvement in SFC that has the potential to vault their performance to levels of similar reproducibility and reliability observed for high performance liquid chromatography (HPLC). Further research in SEF may lead to a better understanding of the mechanism of interaction between the solutes and chromatographic surface.
RESUMEN
Slalom chromatography (SC) was discovered in 1988 for analyzing double-stranded (ds) DNA. However, its progress was impeded by practical issues such as low-purity particles, sample loss, and lack of a clear retention mechanism. With the rise of cell and gene therapies and the availability today of bio-inert ultra-high-pressure liquid chromatography (UHPLC) columns and systems, SC has regained interest. In SC, the elution order is opposite to that observed in hydrodynamic chromatography (HDC): larger DNA molecules are more retained than small ones. Yet, the underlying SC retention mechanism remains elusive. We provide the physicochemical background necessary to explain, at a microscopic scale, the full transition from a HDC to a SC retention mechanism. This includes the persistence length of the DNA macromolecule (representing DNA stiffness), their relaxation time (τR) from the non-equilibrium contour length to the equilibrium entropic configuration, and the relationship between the mobile phase shear rate (ãγÌã) in packed columns and the DNA extended length. We propose a relevant retention model to account for the simultaneous impact of hydrodynamic chromatography (HDC) and SC on the retention factors of a series of large and linear dsDNAs (ranging from 2 to 48 kbp). SC data were acquired using bio-inert MaxPeakTM Columns packed with 1.7µm BEHTM 45 Å, 1.8µm BEH 125 Å, 2.4µm BEH 125 Å, 5.3µm BEH 125 Å, and 11.3µm BEH 125 Å Particles, an ACQUITYTM UPLCTM I-class PLUS System, and either 1 × PBS (pH 7.4) or 100 mM phosphate buffer (pH 8) as the mobile phase. SC is a non-equilibrium retention mode that is dominant when the Weissenberg number (Wi=ãγÌãτR) is much larger than 10 and the average extended length of DNA exceeds the particle diameter. HDC, on the other hand, is an equilibrium retention mode that dominates when Wi<1 (DNA chains remaining in their non-extended configuration). Maximum dsDNA resolution is observed in a mixed HDC-SC retention mode when the extended length of the DNA is approximately half the particle diameter. This work facilitates the development of methods for characterizing various plasmid DNA mixtures, containing linear, supercoiled, and relaxed circular dsDNAs which all have different degree of molecular stiffness.
Asunto(s)
ADN , Terapia Genética , Hidrodinámica , ADN/química , Cromatografía Líquida de Alta Presión/métodosRESUMEN
Pepsin was immobilized on ethyl-bridged hybrid (BEH) particles, and digestion performance was evaluated in a completely online format, with the specific intent of using the particles for hydrogen-deuterium exchange mass spectrometry (HDX MS) experiments. Because the BEH particles are mechanically strong, they could withstand prolonged, continuous high-pressure at 10,000 psi. Online digestion was performed under isobaric conditions with continuous solvent flow, in contrast to other approaches where the pressure or flow is cycled. As expected, digestion efficiency at 10,000 psi was increased and reproducibly produced more peptic peptides versus digestion at 1000 psi. Prototype columns made with the BEH pepsin particles exhibited robust performance, and deuterium back-exchange was similar to that of other immobilized pepsin particles. These particles can be easily incorporated in existing HDX MS workflows to provide more peptide coverage in experiments where fast, efficient, and reproducible online pepsin digestion is desired.
Asunto(s)
Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Pepsina A/química , Pepsina A/metabolismo , Presión , Proteolisis , Secuencia de Aminoácidos , Animales , Medición de Intercambio de Deuterio , Espectrometría de Masas , Datos de Secuencia Molecular , Tamaño de la Partícula , Fragmentos de Péptidos/química , Fragmentos de Péptidos/metabolismo , Dióxido de Silicio/químicaRESUMEN
This work deals with experimental investigations pertaining to the impact of chemical (electrolyte concentration from 0 to 100â¯mM, dissolved nitrogen gas from 0 to 6.7 â¯×⯠10-4 M in water; surface chemistry including hexylphenyl, polyphenyl, C30, C18, and C8; surface coverage in C18-bonded chains from 1.5 to 3.5⯵mol/m2; presence of surface dopant), physical (hydrostatic pressure of water from 50 to 500â¯bar; temperature from 27â¯∘C to 75â¯∘C), and structural parameters (average pore size from 50 Å to 400 Å; pore connectivity) on the dewetting kinetics of water from the hydrophobic mesopores of particles packed in RPLC columns. The results are explained from physico-chemical viewpoints involving intrusion and extrusion Laplace pressures, advancing and receding contact angles, surface tension of water, vapor pressure of water, 3D reconstruction of the actual mesoporous structure, pore connectivity, and the hysteresis in nitrogen adsorption and desorption isotherm onto reversed-phase chromatographic materials. A model of water dewetting consistent with the observations and the physical interpretations is then proposed. Finally, the most relevant practical solutions (pressurizing the column in absence of flow, pore size enlargement, using phenyl-bonded phase, polar embedded or surface doped C18-bonded phases, reducing the C18 surface coverage, doping the silica surface, lengthening of the alkyl-bonded chains, applying low temperatures, purging and degassing the mobile phase with helium gas) are suggested in order to eliminate or at least minimize the retention loss of RPLC columns when using fully aqueous mobile phases.
Asunto(s)
Cromatografía de Fase Inversa/métodos , Agua/química , Adsorción , Gases/química , Interacciones Hidrofóbicas e Hidrofílicas , Cinética , Nitrógeno/química , Porosidad , Dióxido de Silicio/química , Propiedades de SuperficieRESUMEN
An experimental protocol was designed to accurately measure the dewetting kinetics of aqueous mobile phases from reversed-phase liquid chromatography (RPLC) columns. The protocol enables the determination of the losses in the wetted surface area and internal pore volume (leading to undesirable retention losses) of RPLC columns as a function of the dewetting time. It is used to evaluate the impact of the buffer/salt concentration in water (0-100â¯mM), nitrogen concentration dissolved in water (0-6.7â¯×â¯10-4â¯M), column temperature (300-358â¯K), and of the internal structure (pore connectivity) of the stationary phase on the dewetting kinetics of various RPLC packing materials. From a fundamental viewpoint, the experimental facts demonstrate that dewetting kinetics are not solely driven by the pore size of the stationary phase and the contact angle with water. Temperature has a major influence on dewetting kinetics as it controls the nucleation rate of isolated water vapor bubbles over the entire mesoporous network. Additionally, the internal microstructure of the stationary phase (characterized by its internal porosity, pore size distribution, and pore connectivity) influences the rate at which the water vapor bubbles grow and coalesce in the entire particle volume. From a more practical viewpoint, the retention loss of RPLC columns due to water dewetting can be eliminated or at least minimized by (1) adjusting the surface and bonding chemistries to reduce the receding contact angle, (2) elevating the column outlet pressure, (3) operating at the lowest possible temperature, (4) minimizing the pore connectivity of the stationary phase (e.g., by increasing the degree of surface functionalization from C8 to C18-bonded phases), and (5) by degassing the aqueous mobile phase from any dissolved gases.
Asunto(s)
Cromatografía de Fase Inversa , Agua/química , Interacciones Hidrofóbicas e Hidrofílicas , Cinética , Porosidad , PresiónRESUMEN
Highly efficient capillary columns packed with superficially porous particles were created for use in ultrahigh pressure liquid chromatography. Superficially porous particles around 1.5µm in diameter were packed into fused silica capillary columns with 30, 50, and 75µm internal diameters. To create the columns, several capillary columns were serially packed from the same slurry, with packing progress plots being generated to follow the packing of each column. Characterization of these columns using hydroquinone yielded calculated minimum reduced plate heights as low as 1.24 for the most efficient 30µm internal diameter column, corresponding to over 500,000plates/m. At least one highly efficient column (minimum reduced plate height less than 2) was created for all three of the investigated column inner diameters, with the smallest diameter columns having the highest efficiency. This study proves that highly efficient capillary columns can be created using superficially porous particles and shows the efficiency potential of these particles.
Asunto(s)
Técnicas de Química Analítica/instrumentación , Técnicas de Química Analítica/métodos , Cromatografía Liquida/instrumentación , Hidroquinonas/química , Tamaño de la Partícula , Porosidad , Presión , Dióxido de Silicio/químicaRESUMEN
The characterization and evaluation of three novel 5-microm HPLC column packings, prepared using ethyl-bridged hybrid organic/inorganic materials, is described. These highly spherical hybrid particles, which vary in specific surface area (140, 187, and 270 m(2)/g) and average pore diameter (185, 148, and 108 A), were characterized by elemental analysis, SEM, and nitrogen sorption analysis and were chemically modified in a two-step process using octadecyltrichlorosilane and trimethylchlorosilane. The resultant bonded materials had an octadecyl surface concentration of 3.17-3.35 micromol/m(2), which is comparable to the coverage obtained for an identically bonded silica particle (3.44 micromol/m(2)) that had a surface area of 344 m(2)/g. These hybrid materials were shown to have sufficient mechanical strength under conditions normally employed for traditional reversed-phase HPLC applications, using a high-pressure column flow test. The chromatographic properties of the C(18) bonded hybrid phases were compared to a C(18) bonded silica using a variety of neutral and basic analytes under the same mobile-phase conditions. The hybrid phases exhibited similar selectivity to the silica-based column, yet had improved peak tailing factors for the basic analytes. Column retentivity increased with increasing particle surface area. Elevated pH aging studies of these hybrid materials showed dramatic improvement in chemical stability for both bonded and unbonded hybrid materials compared to the C(18) bonded silica phase, as determined by monitoring the loss in column efficiency through 140-h exposure to a pH 10 triethylamine mobile phase at 50 degrees C.