Fabrication of Ni-Polyaniline/Graphene Oxide Composite Electrode with High Capacitance and Water Splitting Activity.

The Ni-PANI@GO composite electrode was fabricated via cost effective electrodeposition technique. According to the XRD, FTIR, Raman, SEM, and XPS analyses revealed that the nickel doped PANI@GO composite has been fabricated on the surface of the nickel foam. Addition of nickel significantly enhanced interaction between graphene with PANI leading to higher degree of polyaniline doping though imine groups. Electrochemical investigation revelated the significant performance of the Ni-PANI@GO composite electrode, boosting an impressive capacitance of 4480 F/g at 40 A/g, surpassing previous Ni-foam-based binder-free electrodes. Notably, Ni-PANI@GO electrode displayed excellent catalytic activity in both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), generating a considerable volume of the gas bubbles at relatively modest overpotentials of 279 mV and 244 mV respectively. This event allows for the achievement of 20 mA cm-2 current density. Furthermore, in the laboratory-scale water electrolyzer, a low cell voltage of 1.72 V was achieved, facilitating a water-splitting current density of 20 mA cm-2. This study underscores the premising potential for the real-world device's application of the versatile Ni-PANI@GO composite electrode.

Interfacial Interaction in MeOx/MWNTs (Me-Cu, Ni) Nanostructures as Efficient Electrode Materials for High-Performance Supercapacitors.

Due to their unique physical and chemical properties, complex nanostructures based on carbon nanotubes and transition metal oxides are considered promising electrode materials for the fabrication of high-performance supercapacitors with a fast charge rate, high power density, and long cycle life. The crucial role in determining their efficiency is played by the properties of the interface in such nanostructures, among them, the type of chemical bonds between their components. The complementary theoretical and experimental methods, including dispersion-corrected density functional theory (DFT-D3) within GGA-PBE approximation, scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, X-ray photoelectron, and X-ray absorption spectroscopies, were applied in the present work for the comprehensive investigation of surface morphology, structure, and electronic properties in CuOx/MWCNTs and NiOx/MWCNTs. As a result, the type of interfacial interaction and its correlation with electrochemical characteristics were determined. It was found that the presence of both Ni-O-C and Ni-C bonds can increase the contact between NiO and MWCNTs, and, through this, promote electron transfer between NiO and MWCNTs. For NiOx/MWCNTs, better electrochemical characteristics were observed than for CuOx/MWCNTs, in which the interfacial interaction is determined only by bonding through Cu-O-C bonds. The electrochemical properties of CuOx/MWCNTs and NiOx/MWCNTs were studied to demonstrate the effect of interfacial interaction on their efficiency as electrode materials for supercapacitor applications.

Synthesis and characterization of MnCrO4, a new mixed-valence antiferromagnet.

A new orthorhombic phase, MnCrO4, isostructural with MCrO4 (M = Mg, Co, Ni, Cu, Cd) was prepared by evaporation of an aqueous solution, (NH4)2Cr2O7 + 2 Mn(NO3)2, followed by calcination at 400 °C. It is characterized by redox titration, Rietveld analysis of the X-ray diffraction pattern, Cr K edge and Mn K edge XANES, ESR, magnetic susceptibility, specific heat and resistivity measurements. In contrast to the high-pressure MnCrO4 phase where both cations are octahedral, the new phase contains Cr in a tetrahedral environment suggesting the charge balance Mn(2+)Cr(6+)O4. However, the positions of both X-ray absorption K edges, the bond lengths and the ESR data suggest the occurrence of some mixed-valence character in which the mean oxidation state of Mn is higher than 2 and that of Cr is lower than 6. Both the magnetic susceptibility and the specific heat data indicate an onset of a three-dimensional antiferromagnetic order at TN ≈ 42 K, which was confirmed also by calculating the spin exchange interactions on the basis of first principles density functional calculations. Dynamic magnetic studies (ESR) corroborate this scenario and indicate appreciable short-range correlations at temperatures far above TN. MnCrO4 is a semiconductor with activation energy of 0.27 eV; it loses oxygen on heating above 400 °C to form first Cr2O3 plus Mn3O4 and then Mn1.5Cr1.5O4 spinel.

XANES Measurements for Studies of Adsorbed Protein Layers at Liquid Interfaces.

X-ray absorption near edge structure (XANES) spectra for protein layers adsorbed at liquid interfaces in a Langmuir trough have been recorded for the first time. We studied the parkin protein (so-called E3 ubiquitin ligase), which plays an important role in pathogenesis of Parkinson disease. Parkin contains eight Zn binding sites, consisting of cysteine and histidine residues in a tetracoordinated geometry. Zn K-edge XANES spectra were collected in the following two series: under mild radiation condition of measurements (short exposition time) and with high X-ray radiation load. XANES fingerprint analysis was applied to obtain information on ligand environments around zinc ions. Two types of zinc coordination geometry were identified depending on X-ray radiation load. We found that, under mild conditions, local zinc environment in our parkin preparations was very similar to that identified in hemoglobin, treated with a solution of ZnCl2 salt. Under high X-ray radiation load, considerable changes in the zinc site structure were observed; local zinc environment appeared to be almost identical to that defined in Zn-containing enzyme alkaline phosphatase. The formation of a similar metal site in unrelated protein molecules, observed in our experiments, highlights the significance of metal binding templates as essential structural modules in protein macromolecules.

X-ray spectroscopic and diffraction study of the structure of the active species in the Ni(II)-catalyzed polymerization of isocyanides.

The structure of the active complex in the Ni-catalyzed polymerization of isocyanides to give polyisocyanides is investigated. It is shown by X-ray absorption spectroscopy (XAS), including EXAFS (extended X-ray absorption fine structure) and XANES (X-ray absorption near edge structure), and single-crystal X-ray diffraction, to contain a carbene-like ligand. This is the first structural characterization of a crucial intermediate in the so-called merry-go-round mechanism for Ni-catalyzed isocyanide polymerization.