Elucidating the roles of electrolytes and hydrogen bonding in the dewetting dynamics of the tear film.

This study explores the impact of electrostatic interactions and hydrogen bonding on tear film stability, a crucial factor for ocular surface health. While mucosal and meibomian layers have been extensively studied, the role of electrolytes in the aqueous phase remains unclear. Dry eye syndrome, characterized by insufficient tear quantity or quality, is associated with hyperosmolality, making electrolyte composition an important factor that might impact tear stability. Using a model buffer solution on a silica glass dome, we simulated physiologically relevant tear film conditions. Sodium chloride alone induced premature dewetting through salt crystal nucleation. In contrast, trace amounts of solutes with hydroxyl groups (sodium phosphate dibasic, potassium phosphate monobasic, and glucose) exhibited intriguing phenomena: quasi-stable films, solutal Marangoni-driven fluid influx increasing film thickness, and viscous fingering due to Saffman-Taylor instability. These observations are rationalized by the association of salt solutions with increased surface tension and the propensity of hydroxyl-group-containing solutes to engage in significant hydrogen bonding, altering local viscosity. This creates a viscosity contrast between the bulk buffer solution and the film region. Moreover, these solutes shield the glass dome, counteracting sodium chloride crystallization. These insights not only advance our understanding of tear film mechanics but also pave the way for predictive diagnostics in dry eye syndrome, offering a robust platform for personalized medical interventions based on individual tear film composition.

Nanoscaled Morphology and Mechanical Properties of a Biomimetic Polymer Surface on a Silicone Hydrogel Contact Lens.

Materials taking advantage of the characteristics of biological tissues are strongly sought after in medical science and bioscience. On the natural corneal tissue surface, the highly soft and lubricated surface is maintained by composite structures composed of hydrophilic biomolecules and substrates. To mimic this structure, the surface of a silicone hydrogel contact lens was modified with a biomimetic phospholipid polymer, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), and the nanoscaled morphology and mechanical properties of the surface were confirmed with advanced surface characterization and imaging techniques under an aqueous medium. Concavities and convexities on the nanometer order were recognized on the surface. The surface was completely covered with a PMPC layer and remained intact even after 30 days of clinical use in a human ocular environment. The mechanical properties of the natural corneal tissue and the PMPC-modified surface were similar in the living environment, that is, low modulus and frictional properties comparable to natural tissues. These results show the validity of material preparation by biomimetic methods. The methodologies developed in this study may contribute to future development of human-friendly medical devices.

Fluid confinement within a branched polymer structure enhances tribological performance of a poly(2-methacryloyloxyethyl phosphorylcholine)-surface-modified contact lens.

The poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-modified, silicone hydrogel, contact lens (CL) material lehfilcon A has previously been demonstrated to have a lubricious, antifouling and ultra-soft surface. This study provides confirmatory identification of the outer polymer structures on this CL surface as branched PMPC structures. It further aims to understand their role in providing enhanced tribological performance via fluid confinement. A combination of scanning transmission electron microscopy and atomic force microscopy infrared spectroscopy has been used to achieve both morphological and chemical confirmation of branched PMPC structures resembling the polysaccharide species present on the surface of the cornea. Measurements of the fluid-confinement behaviour of this layer, by means of nanoindentation experiments, show it to resist squeeze-out of the interstitial fluid, thereby boosting lubrication by virtue of a fluid-load-support mechanism. Tribological testing of CLs showed this effective lubrication to be maintained after one month of daily wearing.

Biomimetic-Engineered Silicone Hydrogel Contact Lens Materials.

Contact lenses are one of the most successful applications of biomaterials. The chemical structure of the polymers used in contact lenses plays an important role in determining the function of contact lenses. Different types of contact lenses have been developed based on the chemical structure of polymers. When designing contact lenses, materials scientists consider factors such as mechanical properties, processing properties, optical properties, histocompatibility, and antifouling properties, to ensure long-term wear with minimal discomfort. Advances in contact lens materials have addressed traditional issues such as oxygen permeability and biocompatibility, improving overall comfort, and duration of use. For example, silicone hydrogel contact lenses with high oxygen permeability were developed to extend the duration of use. In addition, controlling the surface properties of contact lenses in direct contact with the cornea tissue through surface polymer modification mimics the surface morphology of corneal tissue while maintaining the essential properties of the contact lens, a significant improvement for long-term use and reuse of contact lenses. This review presents the material science elements required for advanced contact lenses of the future and summarizes the chemical methods for achieving these goals.

Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method.

As new ultra-soft materials are being developed for medical devices and biomedical applications, the comprehensive characterization of their physical and mechanical properties is both critical and challenging. To characterize the very low surface modulus of the novel biomimetic lehfilcon A silicone hydrogel contact lens coated with a layer of a branched polymer brush structure, an improved atomic force microscopy (AFM) nanoindentation method has been applied. This technique allows for precise contact-point determination without the effects of viscous squeeze-out upon approaching the branched polymer. Additionally, it allows individual brush elements to be mechanically characterized in the absence of poroelastic effects. This was accomplished by selecting an AFM probe with a design (tip size, geometry, and spring constant) that was especially suited to measuring the properties of soft materials and biological samples. The enhanced sensitivity and accuracy of this method allows for the precise measurement of the very soft lehfilcon A material, which has an extremely low elastic modulus in the surface region (as low as 2 kPa) and extremely high elasticity (nearly 100%) in an aqueous environment. The surface-characterization results not only reveal the ultra-soft nature of the lehfilcon A lens surface but also demonstrate that the elastic modulus exhibits a 30 kPa/200 nm gradient with depth due to the disparity between the modulus of the branched polymer brushes and the SiHy substrate. This surface-characterization methodology may be applied to other ultra-soft materials and medical devices.

Sustained Release of a Polymeric Wetting Agent from a Silicone-Hydrogel Contact Lens Material.

Uptake and release kinetics are investigated of a dilute aqueous polymeric-surfactant wetting agent, (ethylene oxide)45-(butylene oxide)10 copolymer, also referred to as poly(oxyethylene)-co-poly(oxybutylene), impregnated into a newly designed silicone-hydrogel lens material. Transient scanning concentration profiles of the fluorescently tagged polymeric surfactant follow Fick's second law with a diffusion coefficient near 10-11 cm2/s, a value 3-4 orders smaller than that of the free surfactant in bulk water. The Nernst partition coefficient of the tagged polymeric wetting agent, determined by fluorescence microscopy and by methanol extraction, is near 350, a very large value. Back-extraction of the polymeric-surfactant wetting agent releases only ∼20% of the loaded amount after soaking the fully loaded lens for over 7 days. The remaining ∼80% is irreversibly bound in the lens matrix. Reverse-phase liquid chromatography of the lens-loaded and lens-extracted surfactant demonstrates that the released wetting agent is more hydrophilic with a higher polarity. Aqueous poly(oxyethylene)-co-poly(oxybutylene) is hypothesized to attach strongly to the lens matrix, most likely to the lens silicone domains. Strong binding leads to slow transient diffusion, to large uptake, and to significant irreversible retention. These characteristics indicate the suitability of using a poly(oxyethylene)-co-poly(oxybutylene) nonionic polymeric surfactant to maintain enhanced lens wettability over time. Methodology and findings from this study provide useful insights for designing sustained-release contact-lens wetting agents and materials.

Surface characterization of a silicone hydrogel contact lens having bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer layer in hydrated state.

A silicone hydrogel contact lens material, with a unique chemical and physical structure has been designed for long-term ocular performance. Enhancement of this silicone hydrogel contact lens material was achieved through surface modification using a cross-linkable bioinspired 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer, which creates a soft surface gel layer on the silicone hydrogel base material. The surface properties of this MPC polymer-modified lens were characterized under hydrated condition revealing, inter alia, its unique polymer structure, excellent hydrophilicity, lubricity, and flexibility. Analysis of the MPC polymer layer in a hydrated state was performed using a combination of a high-resolution environmental scanning electron microscopy and atomic force microscopy. Compared to the silicone hydrogel base material, this surface had a higher captive bubble contact angle, which corresponds to higher hydrophilicity of the surface. In addition, the hydrated MPC polymer layer exhibited an extremely soft surface and reduced the coefficient of friction by more than 80 %. These characteristics were attributed to the hydration state of the MPC polymer layer on the surface of the silicone hydrogel base material. Also, interaction force of protein deposition was lowered on the surface. Such superior surface properties are anticipated to contribute to excellent ocular performance.

Wetting Characteristics of Plasma-Modified Porous Polyethylene.

This paper examines the wetting characteristics of porous polyethylene surfaces modified by exposure to reactive oxygen glow discharge gas plasma, through the direct measurement of the wicking properties of the modified material. It is well-known that oxygen plasma can be used to chemically alter the surface of polyethylene to enhance wetting properties. Chemical and physical modification of a polymer's surface is the consequence of reactions initiated by the collision of high-energy species in the plasma with the polymer surface. The conditions of the plasma treatment, such as electric field strength (power), exposure time, and chamber pressure, govern the frequency and energy of collisions and, thus, determine the nature and degree of the chemical modification of the polyethylene surface. Comparisons of the chemical modification of sintered porous polyethylene surfaces achieved through treatments with reactive oxygen glow discharge gas plasmas generated at various powers, chamber pressures, and times of exposure were made by measuring the wicking rate of distilled and deionized water in the modified materials. A strong correlation was observed between the electric field power used to generate the plasma and the degree of chemical modification of the polyethylene surfaces. In addition, the rate of chemical modification was also found to be a function of the electric field power.

microRNAs exhibit high frequency genomic alterations in human cancer.

MicroRNAs (miRNAs) are endogenous noncoding RNAs, which negatively regulate gene expression. To determine genomewide miRNA DNA copy number abnormalities in cancer, 283 known human miRNA genes were analyzed by high-resolution array-based comparative genomic hybridization in 227 human ovarian cancer, breast cancer, and melanoma specimens. A high proportion of genomic loci containing miRNA genes exhibited DNA copy number alterations in ovarian cancer (37.1%), breast cancer (72.8%), and melanoma (85.9%), where copy number alterations observed in >15% tumors were considered significant for each miRNA gene. We identified 41 miRNA genes with gene copy number changes that were shared among the three cancer types (26 with gains and 15 with losses) as well as miRNA genes with copy number changes that were unique to each tumor type. Importantly, we show that miRNA copy changes correlate with miRNA expression. Finally, we identified high frequency copy number abnormalities of Dicer1, Argonaute2, and other miRNA-associated genes in breast and ovarian cancer as well as melanoma. These findings support the notion that copy number alterations of miRNAs and their regulatory genes are highly prevalent in cancer and may account partly for the frequent miRNA gene deregulation reported in several tumor types.

Deposition and wetting characteristics of polyelectrolyte multilayers on plasma-modified porous polyethylene.

Hydrophilic and chemically reactive porous media were prepared by adsorbing functional polymers at the surface of sintered polyethylene membranes. Modification of the membrane was accomplished by first exposing the membrane to an oxygen glow discharge gas plasma to introduce an electrostatic charge at the membrane surfaces. Cationic polyelectrolyte polyethylenimine (PEI) was adsorbed from solution to the anionic-charged surface to form an adsorbed monolayer. The adsorption of a second anionic polyelectrolyte onto the PEI layer allows further modification of the membrane surface to form a polyelectrolyte-bilayer complex. The conformation and stability of the adsorbed monolayers and bilayers comprising the modified surface are probed as a function of the polymer structure, charge density, and solubility. Using X-ray photoelectron spectroscopy analysis, we demonstrate that the presence of the polyelectrolyte multilayers drastically increases the density and specificity of the functional groups at the surface, more than what can be achieved through the plasma modification alone. Also, using the wicking rate of deionized, distilled water through the porous membrane to gauge the interfacial energy of the modified surface, we show that the membrane wicking rate can be controlled by varying the chemistry of the adsorbing polyelectrolytes and, to a lesser extent, by adjusting the polarity or ionic strength of the polyelectrolyte solution.