RESUMEN
Clofazimine (CLF) is a riminophenazine derivative and a new therapeutic option with high efficacy for patients with rifampicin-resistant tuberculosis (TB). The blood levels of CLF are low and suboptimal, so therapeutic drug monitoring is required. Prior to this study, there were no molecular imprinting-based solid phase extraction (SPE) sorbents that could be used to determine the blood CLF levels. Hence, we prepared a magnetic molecularly imprinted polymer (MMIPs) to capture CLF. We employed computational selection of a functional monomer and crosslinker and confirmed these selections based on the association constant (K a) and a Job plot. We synthesised MMIPs with two surface modifiers and characterized the polymers. Our computational analysis based on the bond energy revealed that methyl methacrylate (MMA) was the most suitable functional monomer at a CLF-to-MMA molar ratio of 1:4. Based on the bond energy, the most suitable crosslinker was trimethylolpropane trimethacrylate (TRIM) at a CLF-to-TRIM molar ratio of 1:1. We determined the K a of MMA and TRIM in different solvents. Isopropanol produced the highest K a. The Job plot showed that a template-to-MMA-to-TRIM molar ratio of 1:4:20 was optimal to synthesize imprinted polymer in isopropanol. We prepared MMIPs using two different modifiers, namely aminopropyltrimethoxysilane (APTES) and oleic acid (OA), using the ratio determined from the Job plot. Physical characteristic tests carried out using FT-IR, SEM-EDS, PSA, BET and VSM, showed that the synthesis was success with a spherical and uniform agglomeration of particles, also a flat surface with many holes with a particle size of MMIP-APTES and MMIP-OA respectively 0.14 µm and 0.28 µm, showed a surface area for MMIP-APTES is 2874.51 m2/g and MMIP-OA 2913.07 m2/g, exhibiting superparamagnetic properties with a saturation magnetization value of MMIP-APTES 21.1 emu/g-1 and MMIP-OA 49.9 emu/g-1. Adsorption capacity result showed that MMIP-OA fits well with the Langmuir model, while MMIP-APTES fits better with the Freundlich. Application of MMIP-SPE (Magnetic Molecular Imprinted Polymer-Solid Phase Extraction) APTES resulted 92.3 ± 6.1 % and MMIP-SPE-OA 51.5 ± 8.1 % for recovering CLF in blood. The result of selectivity test also showed that MMIP-SPE-APTES is better than MMIP-SPE-OA and selectively recover CLF from human blood plasma existed together with other TB-Drugs. The study result shows that MMIPs with APTES modification can be used for CLF determination in human blood plasma.
RESUMEN
Eleutherine bulbosa bulbs, an endemic plant in Indonesia, have enormous potential as raw materials for pharmaceutical products. Therefore, it is necessary to strengthen and develop extraction methods that are easy, rapid, and efficient to enrich targeted secondary metabolites. This study aims to optimize the microwave-assisted extraction (MAE) method conditions for polyphenol metabolite from E. bulbosa bulbs. The MAE method (with different conditions) was applied to extract total polyphenol content (TPC) from E. bulbosa bulbs. TPC values were determined using a 96-well microplate reader spectrophotometry method and Folin-Ciocalteu reagent. The variables of MAE, as an experimental design-independent variable, were involved. The MAE method condition was optimized using response surface methodology (RSM) and Box-Behnken design based on the TPC value. The MAE condition was optimized with 60% ethanol, sample-solvent ratio of 1:10 g/mL, and 50% Watts of microwave power for 10 min. The quadratic regression analysis was achieved to predict the TPC value using the equation: TPC value = 28.63-5.545A +2.211B -0.741C +1.995D - 4.045AB +0.856AC -7.541BC +1.961CD -8.342A2-0.071B2 +1.840C2-1.535D2. For the scale-up confirmation test, a 50-g sample was used to prove the validity of the equation to predict the TPC value, yielding 35.33 ± 2.13 mg gallic acid equivalent/g samples. The optimum of the MAE condition recommended based on the results of RSM analysis can be applied directly to the enrichment of polyphenols metabolite constituent of E. bulbosa easily, cheaply, quickly, and efficiently.
RESUMEN
During the last few years, separation techniques using molecular imprinting polymers (MIPs) have been developed, making certain improvements using magnetic properties. Compared to MIP, Magnetic molecularly imprinted polymers (MMIPs) have high selectivity in sample pre-treatment and allow for fast and easy isolation of the target analyte. Its magnetic properties and good extraction performance depend on the MMIP synthesis step, which consists of 4 steps, namely magnetite manufacture, magnetic coating using modified components, polymerization and template desorption. This review discusses the factors that will affect the performance of MMIP as a selective sorbent at each stage. MMIP, using Fe3O4 as a magnetite core, showed strong superparamagnetism; it was prepared using the co-precipitation method using FeCl3·6H2O and FeCl2·H2O to obtain high magnetic properties, using NH4OH solution added for higher crystallinity. In magnetite synthesis, the use of a higher temperature and reaction time will result in a larger nanoparticle size and high magnetization saturation, while a higher pH value will result in a smaller particle size. In the modification step, the use of high amounts of oleic acid results in smaller nanoparticles; furthermore, determining the correct molar ratio between FeCl3 and the shielding agent will also result in smaller particles. The next factor is that the proper ratio of functional monomer, cross-linker and solvent will improve printing efficiency. Thus, it will produce MMIP with high selectivity in sample pre-treatment.