Signatures of bosonic Landau levels in a finite-momentum superconductor.

Charged particles subjected to magnetic fields form Landau levels (LLs). Originally studied in the context of electrons in metals1, fermionic LLs continue to attract interest as hosts of exotic electronic phenomena2,3. Bosonic LLs are also expected to realize novel quantum phenomena4,5, but, apart from recent advances in synthetic systems6,7, they remain relatively unexplored. Cooper pairs in superconductors-composite bosons formed by electrons-represent a potential condensed-matter platform for bosonic LLs. Under certain conditions, an applied magnetic field is expected to stabilize an unusual superconductor with finite-momentum Cooper pairs8,9 and exert control over bosonic LLs10-13. Here we report thermodynamic signatures, observed by torque magnetometry, of bosonic LL transitions in the layered superconductor Ba6Nb11S28. By applying an in-plane magnetic field, we observe an abrupt, partial suppression of diamagnetism below the upper critical magnetic field, which is suggestive of an emergent phase within the superconducting state. With increasing out-of-plane magnetic field, we observe a series of sharp modulations in the upper critical magnetic field that are indicative of distinct vortex states and with a structure that agrees with predictions for Cooper pair LL transitions in a finite-momentum superconductor10-14. By applying Onsager's quantization rule15, we extract the momentum. Furthermore, study of the fermionic LLs shows evidence for a non-zero Berry phase. This suggests opportunities to study bosonic LLs, topological superconductivity, and their interplay via transport16, scattering17, scanning probe18 and exfoliation techniques19.

Developing fibrillated cellulose as a sustainable technological material.

Cellulose is the most abundant biopolymer on Earth, found in trees, waste from agricultural crops and other biomass. The fibres that comprise cellulose can be broken down into building blocks, known as fibrillated cellulose, of varying, controllable dimensions that extend to the nanoscale. Fibrillated cellulose is harvested from renewable resources, so its sustainability potential combined with its other functional properties (mechanical, optical, thermal and fluidic, for example) gives this nanomaterial unique technological appeal. Here we explore the use of fibrillated cellulose in the fabrication of materials ranging from composites and macrofibres, to thin films, porous membranes and gels. We discuss research directions for the practical exploitation of these structures and the remaining challenges to overcome before fibrillated cellulose materials can reach their full potential. Finally, we highlight some key issues towards successful manufacturing scale-up of this family of materials.

Electrical switching of magnetic order in an orbital Chern insulator.

Magnetism typically arises from the joint effect of Fermi statistics and repulsive Coulomb interactions, which favours ground states with non-zero electron spin. As a result, controlling spin magnetism with electric fields-a longstanding technological goal in spintronics and multiferroics1,2-can be achieved only indirectly. Here we experimentally demonstrate direct electric-field control of magnetic states in an orbital Chern insulator3-6, a magnetic system in which non-trivial band topology favours long-range order of orbital angular momentum but the spins are thought to remain disordered7-14. We use van der Waals heterostructures consisting of a graphene monolayer rotationally faulted with respect to a Bernal-stacked bilayer to realize narrow and topologically non-trivial valley-projected moiré minibands15-17. At fillings of one and three electrons per moiré unit cell within these bands, we observe quantized anomalous Hall effects18 with transverse resistance approximately equal to h/2e2 (where h is Planck's constant and e is the charge on the electron), which is indicative of spontaneous polarization of the system into a single-valley-projected band with a Chern number equal to two. At a filling of three electrons per moiré unit cell, we find that the sign of the quantum anomalous Hall effect can be reversed via field-effect control of the chemical potential; moreover, this transition is hysteretic, which we use to demonstrate non-volatile electric-field-induced reversal of the magnetic state. A theoretical analysis19 indicates that the effect arises from the topological edge states, which drive a change in sign of the magnetization and thus a reversal in the favoured magnetic state. Voltage control of magnetic states can be used to electrically pattern non-volatile magnetic-domain structures hosting chiral edge states, with applications ranging from reconfigurable microwave circuit elements to ultralow-power magnetic memories.

Emerging Engineered Wood for Building Applications.

The building sector, including building operations and materials, was responsible for the emission of ∼11.9 gigatons of global energy-related CO2 in 2020, accounting for 37% of the total CO2 emissions, the largest share among different sectors. Lowering the carbon footprint of buildings requires the development of carbon-storage materials as well as novel designs that could enable multifunctional components to achieve widespread applications. Wood is one of the most abundant biomaterials on Earth and has been used for construction historically. Recent research breakthroughs on advanced engineered wood products epitomize this material's tremendous yet largely untapped potential for addressing global sustainability challenges. In this review, we explore recent developments in chemically modified wood that will produce a new generation of engineered wood products for building applications. Traditionally, engineered wood products have primarily had a structural purpose, but this review broadens the classification to encompass more aspects of building performance. We begin by providing multiscale design principles of wood products from a computational point of view, followed by discussion of the chemical modifications and structural engineering methods used to modify wood in terms of its mechanical, thermal, optical, and energy-related performance. Additionally, we explore life cycle assessment and techno-economic analysis tools for guiding future research toward environmentally friendly and economically feasible directions for engineered wood products. Finally, this review highlights the current challenges and perspectives on future directions in this research field. By leveraging these new wood-based technologies and analysis tools for the fabrication of carbon-storage materials, it is possible to design sustainable and carbon-negative buildings, which could have a significant impact on mitigating climate change.

BRaf signaling principles unveiled by large-scale human mutation analysis with a rapid lentivirus-based gene replacement method.

Rapid advances in genetics are linking mutations on genes to diseases at an exponential rate, yet characterizing the gene-mutation-cell-behavior relationships essential for precision medicine remains a daunting task. More than 350 mutations on small GTPase BRaf are associated with various tumors, and ∼40 mutations are associated with the neurodevelopmental disorder cardio-facio-cutaneous syndrome (CFC). We developed a fast cost-effective lentivirus-based rapid gene replacement method to interrogate the physiopathology of BRaf and ∼50 disease-linked BRaf mutants, including all CFC-linked mutants. Analysis of simultaneous multiple patch-clamp recordings from 6068 pairs of rat neurons with validation in additional mouse and human neurons and multiple learning tests from 1486 rats identified BRaf as the key missing signaling effector in the common synaptic NMDA-R-CaMKII-SynGap-Ras-BRaf-MEK-ERK transduction cascade. Moreover, the analysis creates the original big data unveiling three general features of BRaf signaling. This study establishes the first efficient procedure that permits large-scale functional analysis of human disease-linked mutations essential for precision medicine.

Photothermal-Controllable Microneedles with Antitumor, Antioxidant, Angiogenic, and Chondrogenic Activities to Sequential Eliminate Tracheal Neoplasm and Reconstruct Tracheal Cartilage.

The optimal treatment for tracheal tumors necessitates sequential tumor elimination and tracheal cartilage reconstruction. This study introduces an innovative inorganic nanosheet, MnO2 /PDA@Cu, comprising manganese dioxide (MnO2 ) loaded with copper ions (Cu) through in situ polymerization using polydopamine (PDA) as an intermediary. Additionally, a specialized methacrylic anhydride modified decellularized cartilage matrix (MDC) hydrogel with chondrogenic effects is developed by modifying a decellularized cartilage matrix with methacrylic anhydride. The MnO2 /PDA@Cu nanosheet is encapsulated within MDC-derived microneedles, creating a photothermal-controllable MnO2 /PDA@Cu-MDC microneedle. Effectiveness evaluation involved deep insertion of the MnO2 /PDA@Cu-MDC microneedle into tracheal orthotopic tumor in a murine model. Under 808 nm near-infrared irradiation, facilitated by PDA, the microneedle exhibited rapid overheating, efficiently eliminating tumors. PDA's photothermal effects triggered controlled MnO2 and Cu release. The MnO2 nanosheet acted as a potent inorganic nanoenzyme, scavenging reactive oxygen species for an antioxidant effect, while Cu facilitated angiogenesis. This intervention enhanced blood supply at the tumor excision site, promoting stem cell enrichment and nutrient provision. The MDC hydrogel played a pivotal role in creating a chondrogenic niche, fostering stem cells to secrete cartilaginous matrix. In conclusion, the MnO2 /PDA@Cu-MDC microneedle is a versatile platform with photothermal control, sequentially combining antitumor, antioxidant, pro-angiogenic, and chondrogenic activities to orchestrate precise tracheal tumor eradication and cartilage regeneration.

Producing Cellulose Microfibrils at a High Solid Content with and without Mechanical or Enzymatic Pretreatment.

This study conducted a detailed evaluation of the feasibility of producing cellulose microfibrils (CMF) from a kraft-bleached hardwood pulp at high solid contents with and without pretreatments. CMFs produced by planetary ball milling at solid contents 17 and 28% were compared with those from 1 to 5% under the same milling conditions. Fiber pretreatments using a commercial endoglucanase and mechanical refining using a laboratory PFI mill were also applied before ball milling at a solid content of 28%. Two mechanisms of fiber fibrillation were identified from the results obtained: (i) ball and fiber/fibril interactions─the primary mechanism and (ii) interfiber/fibril frictional and tensional interactions─the secondary mechanism. The secondary mechanism plays an important role only in early-stage fibrillation and became less important as fibrillation proceeded in the later stage toward nanofibrillation. Improving fiber dispersion at lower solid content facilitated fibrillation. Endoglucanase pretreatment substantially shortened fibers to result in a "pulverized-like" CMF with short fibrils at an extended milling time. Mechanical refining of fibers facilitated fibrillation to result in CMFs with a morphology similar to that from runs without any fiber pretreatment but for a much shorter milling time. Both CMF water retention value (WRV) measurements and CMF suspension sedimentation experiments showed results consistent with imaging observations. The insights gained through this study provide relevant information with commercial significance regarding CMF production at high solids, which is not currently available in the literature.

Protocol for combined N-of-1 trials to assess cerebellar neurostimulation for movement disorders in children and young adults with dyskinetic cerebral palsy.

BACKGROUND: Movement and tone disorders in children and young adults with cerebral palsy are a great source of disability. Deep brain stimulation (DBS) of basal ganglia targets has a major role in the treatment of isolated dystonias, but its efficacy in dyskinetic cerebral palsy (DCP) is lower, due to structural basal ganglia and thalamic damage and lack of improvement of comorbid choreoathetosis and spasticity. The cerebellum is an attractive target for DBS in DCP since it is frequently spared from hypoxic ischemic damage, it has a significant role in dystonia network models, and small studies have shown promise of dentate stimulation in improving CP-related movement and tone disorders. METHODS: Ten children and young adults with DCP and disabling movement disorders with or without spasticity will undergo bilateral DBS in the dorsal dentate nucleus, with the most distal contact ending in the superior cerebellar peduncle. We will implant Medtronic Percept, a bidirectional neurostimulator that can sense and store brain activity and deliver DBS therapy. The efficacy of cerebellar DBS in improving quality of life and motor outcomes will be tested by a series of N-of-1 clinical trials. Each N-of-1 trial will consist of three blocks, each consisting of one month of effective stimulation and one month of sham stimulation in a random order with weekly motor and quality of life scales as primary and secondary outcomes. In addition, we will characterize abnormal patterns of cerebellar oscillatory activity measured by local field potentials from the intracranial electrodes related to clinical assessments and wearable monitors. Pre- and 12-month postoperative volumetric structural and functional MRI and diffusion tensor imaging will be used to identify candidate imaging markers of baseline disease severity and response to DBS. DISCUSSION: Our goal is to test a cerebellar neuromodulation therapy that produces meaningful changes in function and well-being for people with CP, obtain a mechanistic understanding of the underlying brain network disorder, and identify physiological and imaging-based predictors of outcomes useful in planning further studies. TRIAL REGISTRATION: ClinicalTrials.gov NCT06122675, first registered November 7, 2023.

Processing bulk natural wood into a high-performance structural material.

Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na2SO3 followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose nanofibres. This strategy is shown to be universally effective for various species of wood. Our processed wood has a specific strength higher than that of most structural metals and alloys, making it a low-cost, high-performance, lightweight alternative.

Sleeve gastrectomy links the attenuation of diabetic kidney disease to the inhibition of renal tubular ferroptosis through down-regulating TGF-ß1/Smad3 signaling pathway.

PURPOSE: To investigate how sleeve gastrectomy (SG), a typical operation of bariatric surgery, attenuated symptom, and progression of diabetic kidney disease (DKD). METHODS: DKD model was induced by high-fat diet (HFD) combined with streptozocin in Wistar rats. SG was performed, and the group subjected to sham surgery served as control. The animals were euthanized 12 weeks after surgery, followed by sample collection for the subsequent experiment. The HK-2, a renal proximal tubular epithelial cell line derived from human, was utilized to investigate the potential mechanisms. RESULTS: SG improved metabolic parameters and glucose homeostasis, and could alleviate DKD in terms of renal function indices as well as histological and morphological structures in DM rats, accompanied with a significant reduction in renal tubular injury. Compared with sham group, SG reduced the renal tubular ferroptosis. To further clarify the mechanism involved, in vitro experiments were performed. In the presence of high glucose, renal tubular TGF-ß1 secretion was significantly increased in HK-2 cell line, which led to activation of ferroptosis through TGF-ß1/Smad3 signaling pathway. Inhibition of TGF-ß1 receptor and phosphorylation of Smad3 significantly ameliorated TGF-ß1-mediated ferroptosis. In vivo experiments also found that SG improved the hyperglycemic environment, reduced renal TGF-ß1 concentrations, and down-regulated the TGF-ß1/Smad3 signaling pathway. CONCLUSIONS: With the capacity to lower the glucose, SG could attenuate the ferroptosis by inhibiting TGF-ß1/Smad3 signaling pathway in DKD rats, and eventually attenuated DKD.

Medical expenses of patients with severe mental disorders in Beijing, China.

OBJECTIVES: Mental health has become a significant public health problem that impacts both economic and social development, with severe mental disorders (SMDs) being the top priority. Over recent years, Beijing, China, has introduced several policies to reduce the economic burden on patients with mental health disorders. The aim of this study was to investigate the current status and composition of patients' medical expenses following the introduction of multiple medical policies, explore the factors that may impact the utilisation of medical services and provide a reference and basis for subsequent policy improvements. STUDY DESIGN: Multistage sampling was used to select a representative study population. A retrospective survey was used to collect patient information and data on medical expenses in 2019. METHODS: Descriptive statistics were applied to analyse the current status of patients' medical expenses, and a two-part model was used to examine the factors influencing healthcare utilisation and to model predicted expenses. RESULTS: Among 4940 participants, the average outpatient expenses of patients with SMD who incurred medical expenses were 8373.61 Yuan, and the average hospitalisation expenses were 81,594.05 Yuan. The out-of-pocket expenses were 29.22% of outpatient expenses and 8.13% of inpatient expenses. Factors such as age, household status, economic status, marital status, participation in the Community Free-Medication Service (CFMS) and the type of disease diagnosed influenced the differences in medical expenses and utilisation of services. CONCLUSIONS: The medical expenses of patients with SMD in Beijing are high, but a number of introduced policies have effectively reduced these costs for patients. Future studies should focus on the impact of factors such as age, economic status, participation in the CFMS and the type of disease diagnosed on medical expenses.

In Situ Lignin Adhesion for High-Performance Bamboo Composites.

Bamboo composite is an attractive candidate for structural materials in applications such as construction, the automotive industry, and logistics. However, its development has been hindered due to the use of harmful petroleum-derived synthetic adhesives or low-bonding biobased adhesives. Herein, we report a novel bioadhesion strategy based on in situ lignin bonding that can process natural bamboo into a scalable and high-performance composite. In this process, lignin bonds the cellulose fibrils into a strong network via a superstrong adhesive interface formed by hydrogen bonding and nanoscale entanglement. The resulting in situ glued-bamboo (glubam) composite exhibits a record-high shear strength of ∼4.4 MPa and a tensile strength of ∼300 MPa. This in situ lignin adhesion strategy is facile, highly scalable, and cost-effective, suggesting a promising route for fabricating strong and sustainable structural bamboo composites that sequester carbon and reduce our dependence on petrochemical-based adhesives.

Effects of different stocking densities on the development of reproductive and immune functions in young breeder pigeons during the rearing period.

1. Stocking density (SD) is closely related to animal performance. This experiment was designed to evaluate the development of reproductive and immune functions of young pigeons under different SDs.2. A total of 288 (half male and half female) 40-day-old pigeons (body weight 400 ± 15 g) were allocated into four groups: High stocking density (HSD; 0.308 m3/bird), standard stocking density (SD; 0.616 m3/bird), and low stocking density (LSD; 1.232 m3/bird) and a caged (control; 0.04125 m3/bird). Every group had six replicates of the same sex.3. The results showed that caged male pigeons had the highest testis index, testosterone content, and gene expression of the androgen receptor gene. LSD treatment induced the highest concentrations of oestradiol, progesterone and mRNA levels of reproductive hormone receptor genes in female pigeons. In male pigeons, the spleen index (organ weight calculated as a percentage of total body weight) showed a peak level (0.09 ± 0.020) in the LSD group, and the thymus index peaked (0.23 ± 0.039) in SD group. However, the index for ovary, spleen, thymus and bursa of Fabricius in female pigeons showed no significant changes among different groups.4. The IL-1ß, IL-8, IFN-γ, TGF-ß and toll-like receptor 2 (TLR-2) mRNA levels reached their maximum values in both male and female pigeon spleens in the LSD group.5. Young male pigeons housed in cages showed increased testicular development while low stocking density increased the development of reproductive function in young female pigeons. A larger activity space could help enhance the immune function of both male and female pigeons.

Association of clopidogrel resistance and ABCD-GENE score with long-term clinical prognosis in patients with ischemic stroke or TIA.

BACKGROUND: Clopidogrel resistance (CR) is associated with adverse clinical outcomes in acute ischemic stroke or transient ischemic attack (TIA) patients. However, whether CR affects the long-term clinical prognosis remains to be clarified. The ABCD-GENE score is a novel risk model that identifies CR in cardiovascular disease patients; its diagnostic ability and application in ischemic stroke or TIA remain to be studied. This study aimed to investigate the diagnostic ability of the ABCD-GENE score for CR and analyze the relationship between CR and long-term clinical prognosis in patients with ischemic stroke or TIA. METHODS: From January 2018 to January 2021, 251 ischemic stroke or TIA patients who were treated with clopidogrel for more than three months after onset and maintained the medication until the follow-up time were enrolled, and platelet reactivity was detected by thromboelastography. CYP2C19 gene analysis was performed. Adverse clinical outcomes were recorded from 3months after onset. The median follow-up time was 878days. RESULTS: The prevalence of CR was 33.9%. The proportion of CYP2C19 loss-of-function carriers was 62.2%. The ABCD-GENE score≥10 was independently associated with CR (OR=1.82, 95% CI: 1.02-3.24, P=0.041), and the C-statistic value of the score (as a binary and integer variable) on CR was 0.58 and 0.63, respectively. The risk of long-term adverse clinical outcomes was not significantly different between CR and clopidogrel sensitive groups (12.94% vs. 11.44%, HR=1.22, 95% CI: 0.57-2.62, P=0.603). A similar result was observed between ABCD-GENE score≥10 and ABCD-GENE score<10 groups (10.38% vs. 12.64%, HR=1.19, 95% CI: 0.55-2.60, P=0.666). CONCLUSIONS: In ischemic stroke or TIA patients, the ABCD-GENE score could identify the risk of CR. CR was not associated with long-term adverse clinical outcomes.

[Analysis on the ultrasonic characteristics of tonsillar lymphoma].

Objective: To analyze the ultrasonic features of tonsillar lymphoma to improve the diagnostic accuracy. Methods: The clinical, pathological and ultrasonic data of nine patients with tonsillar lymphoma confirmed by pathology at Tianjin Medical University Cancer Institute and Hospital during June 2015 and June 2022 were analyzed retrospectively, and the characteristics of their ultrasonic images were summarized. Results: All 9 cases of tonsil lymphoma were unilateral tonsil disease, including 4 cases on the left side and 5 cases on the right side. The average maximum diameter of tonsil lymphoma in 9 cases was 4.32 cm. There were 3 cases with simultaneous involvement of tonsil and cervical lymph nodes, all of which were ipsilateral lymph nodes. Gray scale ultrasound showed that the lesions were hypoechoic, with clear boundaries in 7 cases and unclear boundaries in 2 cases. The shape was full and irregular in 5 cases and oval in 4 cases. The echo was uniform in 7 cases and uneven in 2 cases. Color Doppler ultrasonography showed abundant internal blood flow signal in 1 case, a little dotted linear internal blood flow signal in 5 cases, and no obvious internal blood flow signal in 3 cases. Conclusions: The ultrasonic features of tonsillar lymphoma include hypoechoic area, clear boundary, full shape, irregular and uniform internal echo, no or low linear signal of internal blood flow. Ultrasonography is of great value in the diagnosis of this disease and can help clinical decision-making.

[Application of cardiac magnetic resonance imaging in subclinical systemic sclerosis primary heart involvement].

Objectives: Primary cardiac involvement (SSc-PHI) in systemic sclerosis is an important prognostic factor. We aimed to characterize and identify subclinical SSc-PHI using cardiovascular MRI to determine whether disease severity and serum biomarkers are associated with subclinical SSc-PHI. Methods: A total of 26 patients with SSc who had no history of cardiovascular disease or pulmonary hypertension underwent 3 T-enhanced cardiovascular MRI. Measurements included native T1, extracellular volume, advanced gadolinium enhancement, T2 mapping, and left ventricular volume function. Troponin T and N telencephalic natriuretic peptide precursors were also determined. Results: LGE was observed in 13 of 26 patients (50.0%), suggesting focal fibrosis, and T2 mapping was significantly higher in the dcSSc group than in the lcSSc group (P=0.009). Left ventricular volume and function were within the normal range in all patients, but final systolic left ventricular volume was significantly higher in dcSSc than in lcSSc (P=0.021). The modified Rodnan skin score (mRSS) was significantly higher in patients with LGE focal fibrosis (P=0.019). Logistic regression analysis confirmed the association between mRSS and LGE (OR=1.224, P=0.037). In multivariate analysis, T2 mapping was negatively correlated with disease course, and was correlated with dcSSc and fingertip ulcer (R2=0.711, P=0.018, P=0.013, P=0.030). Troponin T was correlated with T2 mapping (r=0.555, P=0.049). Conclusions: Subclinical SSc-PHI is characterized by diffuse and focal myocardial fibrosis, but preserves myocardial systolic function. Subclinical SSC-Phi is associated with TNT, SSc disease severity, and complex peripheral vascular disease. These data provide information for identifying individuals at risk of SSc-PHI.

[Efficacy of rituximab therapy for 10 patients suffering from systemic lupus erythematosus with intestinal involvement].

We retrospectively analyzed therapy efficacy and the adverse reactions of 10 patients suffering from systemic lupus erythematosus (SLE) with intestinal involvement treated with rituximab (RTX). Patients were hospitalized in the Department of Rheumatology and Immunology of the First Medical Center of PLA General Hospital from January 2015 to January 2023. Among the 10 patients, two were men and eight were women. The age of the cohort was (41.9±8.8) years. The age at disease onset was (28.8±9.2) years. The total course of the SLE diagnosis was(109.6±59.9) months. The course of the diagnosis of SLE with intestinal involvement was (89.3±50.2) months. The time from the appearance of intestinal symptoms to the diagnosis of SLE with intestinal involvement was 1.5 (1.0,8.0) months. The time from the diagnosis of SLE with intestinal involvement to RTX use was 13.0 (1.0,46.3) months. Follow-up duration after application of RTX treatment was (55.3±28.4) months. There were five cases of abdominal pain, four cases of abdominal distension, nine cases of diarrhea, three cases of nervous-system involvement, nine cases of lupus nephritis, and seven cases of serositis. All 10 patients underwent computed tomography and radiology of the abdomen. Eight patients had intestinal-wall edema, seven suffered intestinal dilation, four had target signs, three suffered congestion of mesenteric blood vessels, eight had increased mesenteric-fat density, and six had false intestinal obstruction. All 10 patients showed a low level of complement C3 (250-750 mg/L). Nine cases showed a low level of complement C4 (10-90 mg/L). The SLE disease activity index 2000 (SLEDAI-2K) at baseline in 10 patients was 20.5 (17.8, 30.0). After receiving RTX (0.5 g: day 1, day 14, or 375 mg/m2: day 1, day 14) induction treatment, the intestinal symptoms of 10 cases were relieved completely. Four patients had adverse reactions, of which three received a high-dose glucocorticoid combined with RTX treatment simultaneously. Adverse reactions manifested mainly as a reduced level of IgG and infection with herpes simplex virus in one case, reduced level of IgG and lung infection in one patient, lung infection in one case, and reduced IgG level in one patient. RTX may an efficacious treatment strategy for patients suffering from refractory SLE with intestinal involvement.

Uric acid is negatively associated with cognition in the first- episode of schizophrenia.

BACKGROUND: We explored the relationship between levels of serum uric acid (UA) and cognitive impairment in people with schizophrenia to order to better protect and improve cognitive function in such patients. METHODS: A uricase method evaluated serum UA levels in 82 individuals with first-episode schizophrenia and in 39 healthy controls. The Brief Psychiatric Rating Scale (BPRS) and the event-related potential P300 were used to assess the patient's psychiatric symptoms and cognitive functioning. The link between serum UA levels, BPRS scores, and P300 was investigated. RESULTS: Prior to treatment, serum UA levels and latency N3 in the study group were significantly higher than in the control group, whereas the amplitude P3 was considerably lower. After therapy, the study group's BPRS scores, serum UA levels, latency N3, and amplitude P3 were lower than before treatment. According to correlation analysis, serum UA levels in the pre-treatment study group significantly positively correlated with BPRS score and latency N3 but not amplitude P3. After therapy, serum UA levels were no longer substantially related to the BPRS score or amplitude P3 but strongly and positively correlated with latency N3. CONCLUSIONS: First-episode schizophrenia patients have higher serum UA levels than the general population which partly reflects poor cognitive performance. Improving patients' cognitive function may be facilitated by lowering serum UA levels.

[Current status and perspectives of obstetrics in China: an insight from evidence-based medicine].

Nationwide epidemiological data on pregnancy and childbirth was lacking in China during the last decades. Since the establishment of the national data monitoring network and the booming of regional epidemiological studies, more information has emerged. The results and suggestions from the China Labor and Delivery Survey are crucial for improving current clinical practices. Researches that are conducted based on national data monitoring network and hospital-based medical history system, and multicenter clinical trials will provide plenty of useful evidences. These high-quality evidences would further improve clinical practice and development of obstetrics in China.

[Evaluation of the efficacy of medial open wedge high tibial osteotomy combined with anterior cruciate ligament reconstruction in the treatment of varus knee osteoarthritis with anterior cruciate ligament injury].

Objective: To evaluate the efficacy of medial open wedge high tibial osteotomy (MOWHTO) combined with anterior cruciate ligament (ACL) reconstruction in the treatment of varus knee osteoarthritis (OA) with ACL injury. Methods: A follow-up study. The study retrospectively analyzed the patients underwent MOWHTO combined with ACL reconstruction for treatment of varus knee OA with ACL injury in Tianjin Hospital between April 2018 and September 2022. The preoperative and postoperative posterior slope angle (PSA), hip-knee-ankle angle (HKA), visual analog scale (VAS) pain scores, Lysholm score, International Knee Documentation Committee (IKDC) score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and Tegner score were compared. The follow-up indicators were recorded at 6 weeks, 3 months and 1 year after operation, and the complications were recorded. Results: The study included 32 patients (23 males, 9 females) with a mean age of (50.7±8.4) years. The mean follow-up time was (21.2±4.8) months. PSA increased from 9.2°±1.8° preoperatively to 11.1°±2.4° postoperatively, and HKA increased from 168.7°±2.2° to 181.5°±2.2° (both P<0.01). The indicators such as VAS score (6.8±1.1 vs 1.8±0.4), Lysholm score (52.6±7.1 vs 82.0±6.4), IKDC score (64.7±6.2 vs 80.3±10.0), WOMAC score (51.8±6.3 vs 81.8±6.5), and Tegner score (1.9±0.6 vs 5.0±1.0) were all improved after the operation (all P<0.01). Complications occurred in 5 patients (15.6%), including hematomas, sensory abnormalities, intermuscular vein thrombosis and correction angle loss. Conclusion: MOWHTO combined with ACL reconstruction is a safe and effective approach for the treatment of varus knee OA with ACL injury.