RESUMEN
We present Einstein coefficient spectra and a detailed-balance derivation of generalized Einstein relations between them that is based on the connection between spontaneous and stimulated emission. If two broadened levels or bands overlap in energy, transitions between them need not be purely absorptive or emissive. Consequently, spontaneous emission can occur in both transition directions, and four Einstein coefficient spectra replace the three Einstein coefficients for a line. At equilibrium, the four different spectra obey five pairwise relationships and one lineshape generates all four. These relationships are independent of molecular quantum statistics and predict the Stokes' shift between forward and reverse transitions required by equilibrium with blackbody radiation. For Boltzmann statistics, the relative strengths of forward and reverse transitions depend on the formal chemical potential difference between the initial and final bands, which becomes the standard chemical potential difference for ideal solutes. The formal chemical potential of a band replaces both the energy and degeneracy of a quantum level. Like the energies of quantum levels, the formal chemical potentials of bands obey the Rydberg-Ritz combination principle. Each stimulated Einstein coefficient spectrum gives a frequency-dependent transition cross-section. Transition cross-sections obey causality and a detailed-balance condition with spontaneous emission, but do not directly obey generalized Einstein relations. Even with an energetic width much less than the photon energy, a predominantly absorptive forward transition with an energetic width much greater than the thermal energy can have such an extreme Stokes' shift that its reverse transition cross-section becomes predominantly absorptive rather than emissive.
RESUMEN
Despite the vast array of different geochronological tools available, dating the Paleolithic remains one of the discipline's greatest challenges. This review focuses on two different dating approaches: trapped charge and amino acid geochronology. While differing in their fundamental principles, both exploit time-dependent changes in signals found within crystals to generate a chronology for the material dated and hence, the associated deposits. Within each method, there is a diverse range of signals that can be analyzed, each covering different time ranges, applicable to different materials and suitable for different paleoenvironmental and archaeological contexts. This multiplicity of signals can at first sight appear confusing, but it is a fundamental strength of the techniques, allowing internal checks for consistency and providing more information than simply a chronology. For each technique, we present an overview of the basis for the time-dependent signals and the types of material that can be analyzed, with examples of their archaeological application, as well as their future potential.
Asunto(s)
Aminoácidos , Datación Radiométrica , Arqueología/métodos , Fósiles , Datación Radiométrica/métodosRESUMEN
Persistent luminescent nanoparticles (PLNPs) are promising for many bioapplications due to their unique afterglow luminescence following the stoppage of light excitation. However, PLNPs are prone to surface quenching that results in weak afterglow luminescence. Although some efforts have been made to reduce surface quenching through designing homogeneous core-shell PLNPs, the enhancement in afterglow luminescence was insignificant. We hypothesize that the independent absorption and emission of the shell caused less energy to reach the activator ions in the core. Hence, a heterogeneous core-shell PLNP where the shell has a higher band gap than the core would reduce the absorption and emission of the shell. In this work, ZnGa2O4 and Zn2GeO4 were coated on Zn1.2Ga1.6Ge0.2O4:Cr and Zn3Ga2Ge2O10:Eu nanocrystals, respectively, to form heterogeneous core-shell PLNPs and significant luminescence enhancement was achieved compared to their traditional homogeneous core-shell nanostructures.
RESUMEN
Since the invention of lasers, research on the luminescence of crystalline silicon (c-Si) has been a longstanding challenge in the field of photonics. Recent advancements in nanofabrication technology, coupled with in-depth investigations into optical resonance and carrier dynamics, have enabled the realization of efficient luminescence in c-Si.
RESUMEN
Multimodal luminescent materials hold great promise in a diversity of frontier applications. However, achieving the multimodal responsive luminescence at the single nanoparticle level, especially besides light stimuli, has remained a challenge. Here, we report a conceptual model to realize multimodal luminescence by constructing both mechanoluminescence and photoluminescence in a single nanoparticle. We show that the lanthanide-doped fluoride nanoparticles are able to produce excellent mechanoluminescence through X-ray irradiation, and color-tunable mechanoluminescence becomes available by selecting suitable lanthanide emitters in a core-shell-shell structure. Furthermore, the design of a multilayer core-shell nanostructure enables multimodal emissions including radioluminescence, persistent luminescence, mechanoluminescence, upconversion, downshifting, and thermal-stimulated luminescence simultaneously in a single nanoparticle under multichannel excitation and stimuli. These results provide new insights into the mechanism of X-ray induced mechanoluminescence in nanocrystals and contribute to the development of smart luminescent materials toward X-ray imaging encryption, stress sensing, and anticounterfeiting.
RESUMEN
Fluoride-based lanthanide-doped nanoparticles (LDNPs) featuring second near-infrared (NIR-II, 1000-1700 nm) downconversion emission for bioimaging have attracted extensive attention. However, conventional LDNPs cannot be degraded and eliminated from organisms because of an inert lattice, which obstructs bioimaging applications. Herein, the core-shell LDNPs of Na3HfF7:Yb,Er@CaF2:Ce,Zr(Hf) [labeled as Zr(Hf)Ce-HC] with pH-selective and tunable degradability were synthesized for dual-modal bioimaging. Notably, the "softening" lattice of the Na3HfF7 matrix and different Zr4+(Hf4+) doping amounts in the shell enable Zr(Hf)Ce-HC with acidity-dependent and tunable degradability. After coating of an optimized Ce3+-doped CaF2:Zr shell, the near-infrared-IIb (NIR-IIb, 1500-1700 nm) luminescence intensity of ZrCe-HC is enhanced by 5.2 times compared with that of Na3HfF7:Yb,Er. The Hf element with high X-ray attenuation allows ZrCe-HC as the contrast agent for computed tomography (CT) bioimaging. The modification of oxidized sodium alginate endows ZrCe-HC with satisfying biocompatibility for NIR-IIb/CT dual-modal bioimaging. These findings would benefit the bioimaging applications of degradable fluoride-based LDNPs.
Asunto(s)
Fluoruros , Hafnio , Circonio , Circonio/química , Humanos , Hafnio/química , Fluoruros/química , Nanopartículas/química , Tomografía Computarizada por Rayos X/métodos , Animales , Medios de Contraste/químicaRESUMEN
Lead-halide perovskite nanocrystals (NCs) are promising for fabricating deep-blue (<460 nm) light-emitting diodes (LEDs), but their development is plagued by low electroluminescent performance and lead toxicity. Herein, the synthesis of 12 kinds of highly luminescent and eco-friendly deep-blue europium (Eu2+)-doped alkali-metal halides (AX:Eu2+; A = Na+, K+, Rb+, Cs+; X = Cl-, Br-, I-) NCs is reported. Through adjustment of the coordination environment, efficient deep-blue emission from Eu-5d â Eu-4f transitions is realized. The representative CsBr:Eu2+ NCs exhibit a high photoluminescence quantum yield of 91.1% at 441 nm with a color coordinate at (0.158, 0.023) matching with the Rec. 2020 blue specification. Electrically driven deep-blue LEDs from CsBr:Eu2+ NCs are demonstrated, achieving a record external quantum efficiency of 3.15% and half-lifetime of â¼1 h, surpassing the reported metal-halide deep-blue NCs-based LEDs. Importantly, large-area LEDs with an emitting area of 12.25 cm2 are realized with uniform emission, representing a milestone toward commercial display applications.
RESUMEN
Responsive luminescent materials that reversibly react to external stimuli have emerged as prospective platforms for information encryption applications. Despite brilliant achievements, the existing fluorescent materials usually have low information density and experience inevitable information loss when subjected to mechanical damage. Here, inspired by the hierarchical nanostructure of fluorescent proteins in jellyfish, we propose a self-healable, photoresponsive luminescent elastomer based on dynamic interface-anchored borate nanoassemblies for smart dual-model encryption. The rigid cyclodextrin molecule restricts the movement of the guest fluorescent molecules, enabling long room-temperature phosphorescence (0.37 s) and excitation wavelength-responsive fluorescence. The building of reversible interfacial bonding between nanoassemblies and polymer matrix together with their nanoconfinement effect endows the nanocomposites with excellent mechanical performances (tensile strength of 15.8 MPa) and superior mechanical and functional recovery capacities after damage. Such supramolecular nanoassemblies with dynamic nanoconfinement and interfaces enable simultaneous material functionalization and self-healing, paving the way for the development of advanced functional materials.
RESUMEN
The carrier losses due to radiative recombination in monolayer transition metal dichalcogenides are studied using fully microscopic many-body models. The density- and temperature-dependent losses in various Mo- and W-based materials are shown to be dominated by Coulomb correlations beyond the Hartree-Fock level. Despite the much stronger Coulomb interaction in 2D materials, the radiative losses are comparable-if not weaker-than in conventional III-V materials. A strong dependence on the dielectric environment is found in agreement with experimental results.
RESUMEN
In an attempt to optimize the upconversion luminescence (UCL) output of a Nd3+-sensitized near-infrared (808 nm) upconverting core-shell (CS) nanocrystal through deliberate incorporation of lattice defects, a comprehensive analysis of microstrain both at the CS interface and within the core layer was performed using integral breadth calculation of high-energy synchrotron X-ray (λ = 0.568551 Å) diffraction. An atomic level interpretation of such microstrain was performed using pair distribution function analysis of the high-energy total scattering. The core NC developed compressive microstrain, which gradually transformed into tensile microstrain with the growth of the epitaxial shell. Such a reversal was rationalized in terms of a consistent negative lattice mismatch. Upon introduction of lattice defects into the CS systems upon incorporation of Li+, the corresponding UCL intensity was maximized at some specific Li+ incorporation, where the tensile microstrain of CS, compressive microstrain of the core, and atomic level disorders exhibited their respective extreme values irrespective of the activator ions.
RESUMEN
Polymer waveguide devices have attracted increasing interest in several rapidly developing areas of broadband communications since they are easily adaptable to on-chip integration and promise low propagation losses. As a key member of the waveguide gain medium, lanthanide doped nanoparticles have been intensively studied to improve the downconversion luminescence. However, current research efforts are almost confined to erbium-doped nanoparticles and amplifiers operating at the C-band; boosting the downconversion luminescence of Tm3+ for S-band optical amplification still remains a challenge. Here we report a Tb3+-induced deactivation control to enhance Tm3+ downconversion luminescence in a stoichiometric Yb lattice without suffering from concentration quenching. We also demonstrate their potential application in an S-band waveguide amplifier and record a maximum optical gain of 18 dB at 1464 nm. Our findings provide valuable insights into the fundamental understanding of deactivation-controlled luminescence enhancement and open up a new avenue toward the development of an S-band polymer waveguide amplifier with high gain.
RESUMEN
Combining rare earth elements with the halide perovskite structure offers valuable insights into designing nonlead (Pb) luminescent materials. However, most of these compositions tend to form zero-dimensional (0D) networks of metal-halide polyhedra, with higher-dimensional (1D, 2D, and 3D) structures receiving relatively less exploration. Herein, we present synthesis and optical properties of Cs3CeCl6·3H2O, characterized by its unique 1D crystal structure. The conduction band minimum of Cs3CeCl6·3H2O becomes less localized as a result of the increased structural dimension, making it possible for the materials to achieve an efficient electrical injection. For both Cs3CeCl6·3H2O single crystals and nanocrystals, we also observed remarkable luminescence with near-unity photoluminescence quantum yield and exceptional phase stability. Cs3CeCl6·3H2O single crystals demonstrate an X-ray scintillation light yield of 31900 photons/MeV, higher than that of commercial LuAG:Ce (22000 photons/MeV); electrically driven light-emitting diodes fabricated with Cs3CeCl6·3H2O nanocrystals yield the characteristic emission of Ce3+, indicating their potential use in next-generation violet-light-emitting devices.
RESUMEN
Chiroptical activities arising in nanoclusters (NCs) are emerging as one of the most dynamic areas of modern science. However, devising an overarching strategy that is capable of concurrently enhancing the photoluminescence (PL) and circularly polarized luminescence (CPL) of metal NCs remains a formidable challenge. Herein, gold and silver nanoclusters (AuNCs, AgNCs) are endowed with CPL, for the first time, through a universal host-guest approachâcentered around perturbing a chiral microenvironment within chiral hosts, simultaneously enhancing emissions. Remarkably, the photoluminescence quantum yield (PLQY) of AuNCs has undergone an increase of over 200 times upon confinement, escalating from 0.05% to 12%, and demonstrates a CPL response. Moreover, a three-dimensional (3D) model termed "NCs@CMOF" featuring CPL activity is created using metal cluster-based assembly inks through the process of 3D printing. This work introduces a potentially straightforward and versatile approach for achieving both PL enhancement and CPL activities in metal clusters.
RESUMEN
Vibrio (Aliivibrio) fischeri's initial rise to fame derived from its alluring production of blue-green light. Subsequent studies to probe the mechanisms underlying this bioluminescence helped the field discover the phenomenon now known as quorum sensing. Orthologs of quorum-sensing regulators (i.e., LuxR and LuxI) originally identified in V. fischeri were subsequently uncovered in a plethora of bacterial species, and analogous pathways were found in yet others. Over the past three decades, the study of this microbe has greatly expanded to probe the unique role of V. fischeri as the exclusive symbiont of the light organ of the Hawaiian bobtail squid, Euprymna scolopes. Buoyed by this optically amenable host and by persistent and insightful researchers who have applied novel and cross-disciplinary approaches, V. fischeri has developed into a robust model for microbe-host associations. It has contributed to our understanding of how bacteria experience and respond to specific, often fluxing environmental conditions and the mechanisms by which bacteria impact the development of their host. It has also deepened our understanding of numerous microbial processes such as motility and chemotaxis, biofilm formation and dispersal, and bacterial competition, and of the relevance of specific bacterial genes in the context of colonizing an animal host. Parallels in these processes between this symbiont and bacteria studied as pathogens are readily apparent, demonstrating functional conservation across diverse associations and permitting a reinterpretation of "pathogenesis." Collectively, these advances built a foundation for microbiome studies and have positioned V. fischeri to continue to expand the frontiers of our understanding of the microbial world inside animals.
Asunto(s)
Aliivibrio fischeri , Decapodiformes , Percepción de Quorum , Aliivibrio fischeri/genética , Aliivibrio fischeri/fisiología , Animales , Decapodiformes/microbiología , Simbiosis , Regulación Bacteriana de la Expresión Génica , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Interacciones Microbiota-HuespedRESUMEN
Several clades of luminescent bacteria are known currently. They all contain similar lux operons, which include the genes luxA and luxB encoding a heterodimeric luciferase. The aldehyde oxygenation reaction is presumed to be catalyzed primarily by the subunit LuxA, whereas LuxB is required for efficiency and stability of the complex. Recently, genomic analysis identified a subset of bacterial species with rearranged lux operons lacking luxB. Here, we show that the product of the luxA gene from the reduced luxACDE operon of Enhygromyxa salina is luminescent upon addition of aldehydes both in vivo in Escherichia coli and in vitro. Overall, EsLuxA is much less bright compared with luciferases from Aliivibrio fischeri (AfLuxAB) and Photorhabdus luminescens (PlLuxAB), and most active with medium-chain C4-C9 aldehydes. Crystal structure of EsLuxA determined at the resolution of 2.71 Å reveals a (ß/α)8 TIM-barrel fold, characteristic for other bacterial luciferases, and the protein preferentially forms a dimer in solution. The mobile loop residues 264-293, which form a ß-hairpin or a coil in Vibrio harveyi LuxA, form α-helices in EsLuxA. Phylogenetic analysis shows EsLuxA and related proteins may be bacterial protoluciferases that arose prior to duplication of the luxA gene and its speciation to luxA and luxB in the previously described luminescent bacteria. Our work paves the way for the development of new bacterial luciferases that have an advantage of being encoded by a single gene.
RESUMEN
In animal models of cancer, targeted fluorescence bioimaging, performed non-invasively and in real time, is indispensable tool for assessing tumor location, spread of metastasis, and the therapeutic potential of anticancer drugs under development. To overcome the limitation of antibodies in bioimaging applications, small artificial scaffold proteins based on ankyrin repeats (DARPins, designed ankyrin repeat proteins) are used as tumor-associated antigen binders. In this study for the first time, we assessed the potential of DARPin_9-29, the human epidermal growth factor receptor 2 (HER2) subdomain I-specific protein, genetically fused with albumin binding domain (ABD) and conjugated with Cyanine5.5 as a NIR sensor for fluorescence bioimaging of HER2-positive cancer in animal model. In vivo biodistribution studies have revealed sufficient tumor-to-background ratios at 48 h (3.17 ± 0.55) and 72 h (3.49 ± 0.64) postinjection, providing excellent contrast between the primary tumor and tissue background and allowing clear breast tumor detection. Ex vivo biodistribution has shown that ABD module in DARP-ABD sensor prevents renal reabsorption and increases tumor accumulation in more than 10-folds compared to excreting organs. To verify if DARP-ABD-Cy5.5 can demarcate HER2-positive tumor in vivo, HER2-positive syngeneic breast cancer cell line with constitutive gene expression of luciferase eFFLuc, was created. The powerful combination of bioluminescence and fluorescence imaging let to track the fluorescent anti-HER2 DARP-ABD sensor in bioluminescent HER2-positive breast tumors. Our results validate DARP-ABD as a promising sensor for fluorescence-guided imaging of HER2-positive solid cancer, which can be used in the development of improved anticancer treatment strategies.
Asunto(s)
Receptor ErbB-2 , Animales , Receptor ErbB-2/metabolismo , Receptor ErbB-2/genética , Humanos , Femenino , Ratones , Línea Celular Tumoral , Repetición de Anquirina , Albúminas/metabolismo , Albúminas/química , Imagen Óptica/métodos , Distribución Tisular , Carbocianinas/química , Técnicas Biosensibles/métodos , Modelos Animales de Enfermedad , Neoplasias de la Mama/metabolismo , Neoplasias de la Mama/diagnóstico por imagen , Neoplasias de la Mama/patología , Colorantes Fluorescentes/química , Dominios ProteicosRESUMEN
Inherent luminescent short peptides essentially provide opportunities to rationally manipulate supramolecular chirality and chiral luminescence. Herein, a facile protocol to construct a series of naphthalimide-appended dipeptides is reported that show ultrasound wave-activated supramolecular chirality regulated by odd-even law. Naphthalimide luminophores are conjugated to the dipeptide skeleton with variable alkyl spacers. The presence of tyrosine interferes the kinetic aggregation into achiral nanoparticles without chirality transfer to supramolecular scale. However, ultrasound treatment initiates the nanoparticle-to-helix transition accompanied with the appeared chiral optics, including Cotton effect and circularly polarized luminescence (CPL). The supramolecular chiral parameters, including handedness of helices and chiroptical behaviors, follow the odd-even law of alkyl spacers in dipeptides bearing non-substituted naphthalimides. The amine-substitution boosted the quantum yields of dipeptide whereas no odd-even effect. The two types of dipeptides constituted ideal energy transfer pairs that enable the efficient energy transfer as well as the transportation of odd-even law to dipeptides containing substituted naphthalimides. This work sheds light on the construction of luminescent dipeptides with applications in precise control over chirality transportation and chiral luminescence.
RESUMEN
Rare-earth halide double perovskites (DPs) have attracted extensive attention due to their excellent optoelectronic performance. However, the correlation between luminescence performance, crystal structure, and temperature, as well as the inherent energy transfer mechanism, is not well understood. Herein, Lanthanide ions (Ln3+: Nd3+ or Dy3+) as the co-dopants are incorporated into Sb3+ doped Cs2NaYbCl6 DPs to construct energy transfer (ET) models to reveal the effects of temperature and energy levels of rare earth on luminescence and ET. The different excited state structures of Sb3+-Ln3+ doped Cs2NaYbCl6 DPs at different temperatures and relative positions of energy levels of rare earth synergistically determine the physical processes of luminescence. These multi-mode luminescent materials exhibit good performance in anti-counterfeiting, NIR imaging, and temperature sensing. This work provides new physical insights into the effects of temperature and energy levels of rare earth on the energy transfer mechanism and related photophysical process.
RESUMEN
Next-generation medical and consumer electrical devices require soft, flexible materials. Piezoelectric materials, capable of converting mechanical stress into electrical energy, are of interest across various fields. Chiral nanostructures, with inherent chirality, have emerged as potential piezoelectric materials. Peptide-based materials, known for self-assembly and stimuli responsiveness, hold promise for the utilization of chiral nanostructures. When combined with luminescent chromophores, peptides can generate aggregation-induced chiroptical effects like Circularly Polarized Luminescence (CPL) and Circular Dichroism (CD). In this study, a chiral organogel, L,L-1 is synthesized, and its self-assembly, mechanical properties, and chiroptical features are examined. The organogel exhibits thermo-reversible and thixotropic behavior, forming fibrillar networks and 2D-sheets upon cooling. CD spectroscopy reveals aggregation-induced chirality on pyrene chromophore, resulting in CPL with glum values of 3.0 (± 0.2) × 10-3 and 3.1 (± 0.2) × 10-3 for L,L-1 and D,D-1, respectively. Notably, the 2D-sheets exhibit an enhanced piezoelectric response (d33 ≈76.0 pm V-1) compared to the fibrillar network (d33 ≈64.1 pm V-1). Introducing an electron-deficient molecule into the solution forms a Charge-transfer (CT) complex, modulating the piezoelectric response to d33 ≈52.44 pm V-1. This study offers a promising approach to optoelectronics design, presenting a chiral system with both CPL and piezoelectric responses, opening new possibilities for innovative applications.
RESUMEN
Near-infrared (NIR) light is highly suitable for studying biological systems due to its minimal scattering and lack of background fluorescence excitation, resulting in high signal-to-noise ratios. By combining NIR light with lanthanide-based upconversion nanoparticles (UCNPs), upconversion is used to generate UV or visible light within tissue. This remarkable property has gained significant research interest over the past two decades. Synthesis methods are developed to produce particles of various sizes, shapes, and complex core-shell architectures and new strategies are explored to optimize particle properties for specific bioapplications. The diverse photophysics of lanthanide ions offers extensive possibilities to tailor spectral characteristics by incorporating different ions and manipulating their arrangement within the nanocrystal. However, several challenges remain before UCNPs can be widely applied. Understanding the behavior of particle surfaces when exposed to complex biological environments is crucial. In applications where deep tissue penetration is required, such as photodynamic therapy and optogenetics, UCNPs show great potential as nanolamps. These nanoparticles can combine diagnostics and therapeutics in a minimally invasive, efficient manner, making them ideal upconversion probes. This article provides an overview of recent UCNP design trends, highlights past research achievements, and outlines potential future directions to bring upconversion research to the next level.