Assessment of orofacial nociceptive behaviors of mice with the sheltering tube method: Oxaliplatin-induced mechanical and cold allodynia in orofacial regions.

Preclinical studies on pathological pain rely on the von Frey test to examine changes in mechanical thresholds and the acetone spray test to determine alterations in cold sensitivity in rodents. These tests are typically conducted on rodent hindpaws, where animals with pathological pain show reliable nocifensive responses to von Frey filaments and acetone drops applied to the hindpaws. Pathological pain in orofacial regions is also an important clinical problem and has been investigated with rodents. However, performing the von Frey and acetone spray tests in the orofacial region has been challenging, largely due to the high mobility of the head of testing animals. To solve this problem, we implemented a sheltering tube method to assess orofacial nociception in mice. In experiments, mice were sheltered in elevated tubes, where they were quickly accommodated because the tubes provided safe shelters for mice. Examiners could reliably apply mechanical stimuli with von Frey filament, cold stimuli with acetone spray, and light stimuli with a laser beam to the orofacial regions. We validated this method in Nav1.8-ChR2 mice treated with oxaliplatin that induced peripheral neuropathy. Using the von Frey test, orofacial response frequencies and nociceptive response scores were significantly increased in Nav1.8-ChR2 mice treated with oxaliplatin. In the acetone spray test, the duration of orofacial responses was significantly prolonged in oxaliplatin-treated mice. The response frequencies to laser light stimulation were significantly increased in Nav1.8-ChR2 mice treated with oxaliplatin. Our sheltering tube method allows us to reliably perform the von Frey, acetone spray, and optogenetic tests in orofacial regions to investigate orofacial pain.

Conformer aggregates exhibit dual wavelength emissions on chiral binaphthyl-based triphenylethylenes and acetone detection.

The study on structure-property relationship has been a significant focus in the field of organic molecular luminescence. In the present work, three chiral binaphthyl-based triphenylethylene (HTPE) derivatives were prepared through condensation reactions. Despite their similar structures, these compounds exhibited distinct luminescent properties. Diphenylmethane-derived HTPE displayed dual-state emissions, characterized by dual-wavelength emissions which were insensitive to the polarity of solvents. The dual emissions in solution state could be attributed to the different locally excited (LE) excitons. However, upon aggregation, two stable conformers were generated, probably leading to different emission peaks. In contrast, dibenzocycloheptadiene-derived HTPE aggregates showed only a single emission peak. Surprisingly, fluorene-derived HTPE exhibited obvious luminescence in neither solution nor aggregate states due to inherent π-π interactions. These conclusions were substantiated by X-ray analysis, spectroscopic analysis, and theory calculations. Application studies demonstrated that fluorescence on/off switches could be achieved through exposure to acetone. More importantly, trace amounts of acetone could be detected using luminescent materials in both organic and aqueous phases with a detection limit of 0.08 %. Thus, this work not only presents a strategy for designing chiral triphenylethylene fluorophores but also provides valuable information for dual wavelength emissions resulting from two stable conformations.

Photo-Catalyzed Acyl Azolium Promoted Selective α-C(sp3 )-H Acylation of Acetone via HAT: Access to Thermodynamically Less Favoured (Z)-α,ß-Unsaturated Ketones.

Mono α-acylation of acetone has been achieved for the first time by reacting with bench-stable acyl azolium salts under violet-LED light at room temperature. The intermolecular hydrogen atom transfer (HAT) from acetone to triplet state of azolium salts under violet LED irradiation resulted in thermodynamically less favourable (Z)-α,ß-unsaturated ketones with up to 99 : 1 selectivity via C-C bond formation. This compelling protocol access the desired α-C(sp3 )-H acylation product under metal-, ligand- and oxidant-free conditions on a wide range of substrates.

Rotational Spectroscopy of the Acetone-Water Complex: Large Amplitude Motions.

Acetone (CH3COCH3), the simplest ketone, has recently attracted considerable attention for its important role in atmospheric chemistry and in the formation of ices in extraterrestrial sources that contain complex organic molecules. In this study, we employed a combination of experimental rotational spectroscopy and quantum chemistry calculations to investigate the structure and dynamics of the acetone-water complex. Our aim was to understand how non-covalent interactions with water affect the methyl internal rotation dynamics of acetone, and how water-centered large amplitude motions alter the observed physical properties compared to those predicted at the equilibrium position. Detailed rotation-tunneling analyses of acetone-H2O and -D2O reveal that the interactions with water disrupt the equivalence of the two methyl rotors, resulting in a noticeably lower methyl rotor barrier for the top with the close-by water compared to that of free acetone. The barrier for the methyl group further from water is also lower, although to a lesser degree. To gain further insights, extensive theoretical modelling was conducted, focusing on the associated large amplitude motions. Furthermore, quantum theory of atoms in molecules and non-covalent interactions analyses were utilized to visualize the underlying causes of the observed trends.

SnO2QDs sensitized ZnFe2O4spheres with enhanced acetone sensing performance.

Herein, SnO2QDs (<10 nm) with small size instead of conventional nanoparticles was employed to modify ZnFe2O4to synthesize porous and heterogeneous SnO2/ZnFe2O4(ZFSQ) composites for gas sensing. By an immersion process combined with calcination treatment, the resultant porous ZFSQ composites with different contents of SnO2QDs were obtained, and their sensing properties were investigated. Compared with bare ZnFe2O4and SnO2QDs, porous ZFSQ composites based-sensors showed much improved sensor response to acetone. For contrast, the sensor performance of ZFSQ composites was also compared with that of ZnFe2O4sphere modified by SnO2nanoparticles with different size. The porous ZFSQ composite with 5 wt% SnO2QDs (ZFSQ-5) showed a better acetone sensing response than that of other ZFSQ composites, and it exhibited a high response value of 110-100 ppm of acetone and a low detection limit of 0.3 ppm at 240 °C. In addition to the rich heterojunctions and porous structure, the size effect of SnO2QDs was other indispensable reasons for the improved sensor performance. Finally, the ZFSQ-5 composite sensor was attempted to be applied for acetone sensing in exhaled breath, suggesting its great potential in monitoring acetone.

In-Depth Understanding of the Oxidative Compatibility of Volatile Organic Compounds with Mn2O3 and Pt-Loaded Catalysts.

Designing suitable catalysts for efficiently degrading volatile organic compounds (VOCs) is a great challenge due to the distinct variety and nature of VOCs. Herein, the suitability of different typical VOCs (toluene and acetone) over Pt-based catalysts and Mn2O3 was investigated carefully. The activity of Mn2O3 was inferior to Pt-loaded catalysts in toluene oxidation but showed superior ability for destroying acetone, while Pt loading could boost the catalytic activity of Mn2O3 for both acetone and toluene. This suitability could be determined by the physicochemical properties of the catalysts and the structure of the VOC since toluene destruction activity is highly reliant on Pt0 in the metallic state and linearly correlated with the amount of surface reactive oxygen species (Oads), while the crucial factor that affects acetone oxidation is the mobility of lattice oxygen (Olat). The Pt/Mn2O3 catalyst shows highly active Pt-O-Mn interfacial sites, favoring the generation of Oads and promoting Mn-Olat mobility, leading to its excellent performance. Therefore, the design of abundant active sites is an effective means of developing highly adaptive catalysts for the oxidation of different VOCs.

Modeling Novel Aqueous Particle and Cloud Chemistry Processes of Biomass Burning Phenols and Their Potential to Form Secondary Organic Aerosols.

Phenols emitted from biomass burning contribute significantly to secondary organic aerosol (SOA) formation through the partitioning of semivolatile products formed from gas-phase chemistry and multiphase chemistry in aerosol liquid water and clouds. The aqueous-phase SOA (aqSOA) formed via hydroxyl radical (•OH), singlet molecular oxygen (1O2*), and triplet excited states of organic compounds (3C*), which oxidize dissolved phenols in the aqueous phase, might play a significant role in the evolution of organic aerosol (OA). However, a quantitative and predictive understanding of aqSOA has been challenging. Here, we develop a stand-alone box model to investigate the formation of SOA from gas-phase •OH chemistry and aqSOA formed by the dissolution of phenols followed by their aqueous-phase reactions with •OH, 1O2*, and 3C* in cloud droplets and aerosol liquid water. We investigate four phenolic compounds, i.e., phenol, guaiacol, syringol, and guaiacyl acetone (GA), which represent some of the key potential sources of aqSOA from biomass burning in clouds. For the same initial precursor organic gas that dissolves in aerosol/cloud liquid water and subsequently reacts with aqueous phase oxidants, we predict that the aqSOA formation potential (defined as aqSOA formed per unit dissolved organic gas concentration) of these phenols is higher than that of isoprene-epoxydiol (IEPOX), a well-known aqSOA precursor. Cloud droplets can dissolve a broader range of soluble phenols compared to aqueous aerosols, since the liquid water contents of aerosols are orders of magnitude smaller than cloud droplets. Our simulations suggest that highly soluble and reactive multifunctional phenols like GA would predominantly undergo cloud chemistry within cloud layers, while gas-phase chemistry is likely to be more important for less soluble phenols. But in the absence of clouds, the condensation of low-volatility products from gas-phase oxidation followed by their reversible partitioning to organic aerosols dominates SOA formation, while the SOA formed through aqueous aerosol chemistry increases with relative humidity (RH), approaching 40% of the sum of gas and aqueous aerosol chemistry at 95% RH for GA. Our model developments of biomass-burning phenols and their aqueous chemistry can be readily implemented in regional and global atmospheric chemistry models to investigate the aqueous aerosol and cloud chemistry of biomass-burning organic gases in the atmosphere.

A review on natural phenylbutanoid attractants: Occurrence, distribution, and role in nature, especially in relation to Dacini fruit fly behavior and pollination.

The natural occurrence, distribution (within a plant) and roles of four phenylbutanoid compounds (anisyl acetone, cue-lure, raspberry ketone and zingerone) are elucidated for the Asia-Pacific and Oceania regions. These phenylbutanoids may act individually or in combination to attract true fruit fly males belonging to a tribe Dacini of subfamily Dacinae (Diptera: Tepritidae). Of special interest are the mutualistic interactions between the Dacini fruit fly males and the tropical daciniphilous (attracting exclusively Dacini fruit flies) orchids - leading to cross pollination for the orchids and enchanced mating success for the flies. When offered to male flies, anisyl acetone and cue-lure are generally converted to raspberry ketone. Upon consumption, raspberry ketone and zingerone are individually sequestered in the male rectal (pheromonal) gland unchanged. Attracted male flies readily imbibe the phenylbutanoid(s) in the floral synomone to compliment the endogenously synthesized male sex pheromonal components - to enhance attraction of conspecific females during courtship as well as attract conspecific males to form 'leks'. The phenylbutanoid(s) may also act as an allomone to deter vertebrate predators, especially geckos, besides possessing antimicrobial and antioxidant activities. Cue-lure, raspberry ketone and zingerone are important attractants/lures used in pest surveillance and mass trapping under the integrated pest management (IPM) program against quarantine Dacini fruit fly pest species, particularly Bactrocera tryoni and Zeugodacus cucurbitae.

Phytochemical, bactericidal, antioxidant and anti-inflammatory properties of various extracts from Pongamia pinnata and functional groups characterization by FTIR and HPLC analyses.

The present research looked into possible biomedical applications of Pongamia pinnata leaf extract. The first screening of the phytochemical profile showed that the acetone extract had more phytochemicals than the other solvent extracts. These included more saponins, proteins, phenolic compounds, tannins, glycosides, flavonoids, steroids, and sugar. The P. pinnata acetone extract exhibited highest antibacterial activity against C. diphtheriae. The bactericidal activity was found in the following order: C. diphtheria (14 mm) > P. aeruginosa (10 mm) > S. flexneri (9 mm) > S. marcescens (7 mm) > S. typhi (7 mm) > S. epidermidis (7 mm) > S. boydii (6 mm) > S. aureus (3 mm) at 10 mg mL-1 concentration. MIC value of 240 mg mL-1 and MBC is 300 mg mL-1 of concentration with 7 colonies against C. diphtheriae was noticed in acetone extract. Acetone extract of P. pinnata was showed highest percentage of inhibition (87.5 %) at 625 mg mL-1 concentrations by DPPH method. Furthermore, the anti-inflammatory activity showed the fine albumin denaturation as 76% as well as anti-lipoxygenase was found as 61% at 900 mg mL-1 concentrations correspondingly. FT-IR analysis was used to determine the functional groups of compounds with bioactive properties. The qualitative examination of selected plants through HPLC yielded significant peak values determined by intervals through the peak value. In an acetone extract of P. pinnata, 9 functional groups were identified. These findings concluded that the acetone extract has high pharmaceutical value, but more in-vivo research is needed to assess its potential.

Assessment of antimicrobial, antidiabetic, and anti-inflammatory properties of acetone extract of Aerva lanata (L.) by in-vitro approach and bioactive compounds characterization.

The antimicrobial, antidiabetic, and anti-inflammatory activities efficiency of Aerva lanata plant extracts (aqueous (Aqu-E), acetone (Ace-E), and ethanol (Eth-E)) were investigated in this study. Furthermore, the active molecules exist in the crude extract were characterized by UV-Visible spectrophotometer, Fourier transform infrared (FTIR), High-performance liquid chromatography (HPLC), and Gas Chromatography-Mass Spectrometry (GC-MS) analyses. The preliminary phytochemical study revealed that the Ace-E restrain more phytochemicals like alkaloids, saponins, anthraquinone, tannins, phenolics, flavonoids, glycosides, terpenoids, amino acid, steroids, protein, coumarin, as well as quinine than Aqu-E and Eth-E. Accordingly to this Ace-E showed considerable antimicrobial activity as the follows: for bacteria S. aureus > E. coli > K. pneumoniae > P. aeruginosa > B. subtilis and for fungi T. viride > A.flavus > C. albicans > A.niger at 30 mg ml concentration. Similarly, Ace-E showed considerable antidiabetic (α-amylase: 71.7 % and α-glucosidase: 70.1 %) and moderate anti-inflammatory (59 % and 49.8 %) activities. The spectral and chromatogram studies confirmed that the Ace-E have pharmaceutically valuable bioactive molecules such as (Nbutyl)-octadecane, propynoic acid, neophytadiene, and 5,14-di (N-butyl)-octadecane. These findings suggest that Ace-E from A. lanata can be used to purify additional bioactive substances and conduct individual compound-based biomedical application research.

Cupric oxide nanosheet as an oxidase mimic for fluorescent detection of acetone by a 3D-printed portable device.

A cupric oxide (CuO) nanosheet-based chemical fluorescence sensor was developed to realize the detection of acetone in aqueous solutions. CuO is an oxidase mimic and can catalyze the oxidation of o-phenylenediamine (OPD) to form 2,3-diaminophenazine (oxOPD). Interestingly, acetone was found to possess the scavenging ability for superoxide anions generated in the CuO-catalyzed oxidation system, hence weakening the OPD oxidation and leading to a reduction in the fluorescence intensity of the catalyzing system at 574 nm under excitation at 425 nm. Based on this property of acetone, a fluorescent sensor was constructed to detect acetone. The sensor exhibits a linear range of 1.35 to 2 × 105 µmol L-1 and a detection limit of 1.08 µmol L-1. Additionally, a smartphone-free portable device was constructed to realize on-the-spot and rapid detection of acetone in cauliflower, mineral water, tap water, and lake water samples. The recoveries by the portable device are 93.2 to 108% for actual samples, with relative standard deviations of less than 4.3%, indicating a potential application prospect of the device in on-site detection.

Enhanced Acetone Sensing Properties Based on Au-Pd Decorated ZnO Nanorod Gas Sensor.

The mature processes of metal oxide semiconductors (MOS) have attracted considerable interest. However, the low sensitivity of metal oxide semiconductor gas sensors is still challenging, and constrains its practical applications. Bimetallic nanoparticles are of interest owing to their excellent catalytic properties. This excellent feature of bimetallic nanoparticles can solve the problems existing in MOS gas sensors, such as the low response, high operating temperature and slow response time. To enhance acetone sensing performance, we successfully synthesized Au-Pd/ZnO nanorods. In this work, we discovered that Au-Pd nanoparticles modified on ZnO nanorods can remarkably enhance sensor response. The Au-Pd/ZnO gas sensor has long-term stability and an excellent response/recovery process. This excellent sensing performance is attributed to the synergistic catalytic effect of bimetallic AuPd nanoparticles. Moreover, the electronic and chemical sensitization of noble metals also makes a great contribution. This work presents a simple method for preparing Au-Pd/ZnO nanorods and provides a new solution for the detection of acetone based on metal oxide semiconductor.

A Highly Selective Acetone Sensor Based on Coal-Based Carbon/MoO2 Nanohybrid Material.

High temperature represents a critical constraint in the development of gas sensors. Therefore, investigating gas sensors operating at room temperature holds significant practical importance. In this study, coal-based porous carbon (C-700) and coal-based C/MoO2 nanohybrid materials were synthesized using a simple one-step vapor deposition and sintering method, and their gas-sensing performance was investigated. The gas-sensing performance for several VOC gases (phenol, ethyl acetate, ethanol, acetone, triethylamine, and toluene) and a 95% RH high-humidity environment were tested. The results indicated that the C/MoO2-450 sample sintered at 450 °C exhibited excellent specific selectivity towards acetone at room temperature, with a response value of 4153.09% and response/recovery times of 10.8 s and 2.9 s, respectively. Furthermore, the C/MoO2-450 sample also demonstrated good repeatability and long-term stability. The sensing mechanism of the synthesized materials was also explored. The superior gas-sensing performance can be attributed to the synergistic effect between the porous carbon and MoO2 nanoparticles. Given the importance of enhancing the high-tech and high-value-added utilization of coal, this study provides a viable approach for utilizing coal-based carbon materials in detecting volatile organic compounds at room temperature.

α-Fe2O3/TiO2/Ti3C2Tx Nanocomposites for Enhanced Acetone Gas Sensors.

Metal oxide semi-conductors are widely applied in various fields due to their low cost, easy processing, and good compatibility with microelectronic technology. In this study, ternary α-Fe2O3/TiO2/Ti3C2Tx nanocomposites were prepared via simple hydrothermal and annealing treatments. The composition, morphology, and crystal structure of the samples were studied using XPS, SEM, EDS, XRD, and multiple other testing methods. The gas-sensing measurement results suggest that the response value (34.66) of the F/M-3 sensor is 3.5 times higher than the pure α-Fe2O3 sensor (9.78) around 100 ppm acetone at 220°C, with a rapid response and recovery time (10/7 s). Furthermore, the sensors have an ultra-low detection limit (0.1 ppm acetone), excellent selectivity, and long-term stability. The improved sensitivity of the composites is mainly attributed to their excellent metal conductivity, the unique two-dimensional layered structure of Ti3C2Tx, and the heterojunction formed between the nanocomposite materials. This research paves a new route for the preparation of MXene derivatives and metal oxide nanocomposites.

HSP70 Is a Critical Regulator of HSP90 Inhibitor's Effectiveness in Preventing HCl-Induced Chronic Lung Injury and Pulmonary Fibrosis.

Exposure to hydrochloric acid (HCl) can provoke acute and chronic lung injury. Because of its extensive production for industrial use, frequent accidental exposures occur, making HCl one of the top five chemicals causing inhalation injuries. There are no Food and Drug Administration (FDA)-approved treatments for HCl exposure. Heat shock protein 90 (HSP90) inhibitors modulate transforming growth factor-ß (TGF-ß) signaling and the development of chemical-induced pulmonary fibrosis. However, little is known on the role of Heat Shock Protein 70 (HSP70) during injury and treatment with HSP90 inhibitors. We hypothesized that administration of geranylgeranyl-acetone (GGA), an HSP70 inducer, or gefitinib (GFT), an HSP70 suppressant, alone or in combination with the HSP90 inhibitor, TAS-116, would improve or worsen, respectively, HCl-induced chronic lung injury in vivo and endothelial barrier dysfunction in vitro. GGA, alone, improved HCl-induced human lung microvascular endothelial cells (HLMVEC) barrier dysfunction and, in combination with TAS-116, improved the protective effect of TAS-116. In mice, GGA reduced HCl toxicity and while TAS-116 alone blocked HCl-induced chronic lung injury, co-administration with GGA, resulted in further improvement. Conversely, GFT potentiated HCl-induced barrier dysfunction and impaired the antidotal effects of TAS-116. We conclude that combined treatments with HSP90 inhibitors and HSP70 inducers may represent a novel therapeutic approach to manage HCl-induced chronic lung injury and pulmonary fibrosis.

Evolution of the Structure and Morphology of Dual-Linker ZIF-301-eIm.

Few studies have reported on the continuous evolution of dual-linker zeolitic imidazolate frameworks' (ZIFs) structure and morphology during the crystal growth process. Herein, we report the synthesis of a novel ZIF material with CHA topology (ZIF-301-eIm) via the combination of a small-sized 2-ethylimidazole (eIm) with the large-sized 5-chlorobenzimidazole ligand. A series of derivative materials with distinct structures and morphologies were obtained via two pathways: (1) insufficient amount of eIm with prolonged crystallization time (pathway A) and (2) sufficient amount of eIm with prolonged crystallization time (pathway B). Various characterization techniques revealed the continuous evolution of structure and morphology during the crystal growth process. Insufficient amount of eIm and crystallization time (crystallization pathway A) led to ZIF-301-eIm derivatives with defective and open structures alongside an aggregated morphology of nanoparticles. Prolonging the crystallization time allowed small-sized eIm ligands to gradually fill into the framework, resulting in the formation of ZIF-301-eIm-A5 characterized by complete but dense structures with a perfect polyhedral morphology. Remarkably, a sufficient amount of eIm during synthesis (crystallization pathway B) formed ZIF-301-eIm-B1 with a similar structure and morphology to ZIF-301-eIm-A5 in just 1 day. ZIF-301-eIm-B3, with intact, dense structures, exhibits superior acetone/butanol separation performance compared to ZIF-301-eIm-A3 due to small pore windows and large cages facilitating selective adsorption of acetone through exclusion separation.

Simulation analysis of hazardous chemicals released from the furniture plant using ALOHA software.

The manufacturing of wooden furniture is extensive in Thailand's east. Hazardous chemicals were used in the wooden furniture industry's manufacturing process. Hazardous substances released into the surrounding atmosphere appear to have an impact on the environment and individuals. The ALOHA model is frequently used to assess hazardous chemicals released into the environment; this simulation model is an effective tool for modeling chemical compounds and detecting chemical disasters. It has a tremendous potential for preventing mishaps in potentially hazardous or emergency situations. Acetone and butyl acetate were extracted from the hardwood furniture business to identify accidents such as leaking, spillage, and evaporation. It is described as a highly poisonous, combustible, and explosive material. Toxic accident releases have negative implications for the surrounding areas. The goal of this work was to examine each accident using ALOHA software, and the computation of acetone and butyl acetate accidents was shown in this study. This project provides critical data for the furniture plant's chemical emergency rescue strategy as well as recommendations for emergency evacuation site decision-making.

P,N-Coordinating Ylide-Functionalized Phosphines (NYPhos): A Ligand Platform for the Selective Monoarylation of Small Nucleophiles.

Palladium-catalyzed coupling reactions of small nucleophiles are of great interest, but challenging due to difficulties in selectivity control. Herein, we report the development of a new platform of P,N-ligands consisting of ylide-functionalized phosphines with aminophosphonium groups (NYPhos) to address this challenge. These phosphine ligands are easily accessible in a wide structural diversity with highly modular electronic and steric properties. Based on a family of 14 ligands the selective monoarylation of acetone as well as other challenging ketones and amides was accomplished with record-setting activities even for aryl chlorides at room temperature including late-stage functionalizations of drug molecules. Moreover, ammonia and other small primary amines could be coupled at mild conditions. Isolation and structure analyses of palladium complexes within the catalytic cycle confirmed that the P,N-coordination mode is necessary to achieve the observed selectivities. It also demonstrated the facile adjustability of the N-donor strength, which is beneficial for the targeted design of tailored P,N-ligands for future applications.

Longitudinal Changes in Circulating Ketone Body Levels in Patients With Acute Heart Failure: A Post Hoc Analysis of the EMPA-Response-AHF Trial.

BACKGROUND: Ketone bodies are endogenous fuels produced by the liver under conditions of metabolic or neurohormonal stress. Circulating ketone bodies are increased in patients with chronic heart failure (HF), yet little is known about the effect of acute HF on ketosis. We tested the hypothesis that ketogenesis is increased in patients with acute decompensated HF. METHODS AND RESULTS: This was a post hoc analysis of 79 patients with acute HF included in the EMPA-RESPONSE-AHF trial, which compared sodium-dependent glucose-cotransporter protein 2 inhibitor treatment with empagliflozin for 30 days with placebo in patients with acute HF [NCT03200860]. Plasma concentrations of ketone bodies acetone, ß-hydroxybutyrate, and acetoacetate were measured at baseline and 5 different timepoints. Changes in ketone bodies over time were monitored using repeated measures analysis of variance. In the total cohort, median total ketone body concentration was 251 µmol/L (interquartile range, 178-377 µmol/L) at baseline, which gradually decreased to 202 µmol/L (interquartile range, 156-240 µmol/L) at day 30 (P = .041). Acetone decreased from 60 µmol/L (interquartile range, 34-94 µmol/L) at baseline to 30 µmol/L (interquartile range, 21-42 µmol/L) ( P < .001), whereas ß-hydroxybutyrate and acetoacetate remained stable over time. Higher acetone concentrations were correlated with higher N-terminal pro brain natriuretic peptide levels (r = 0.234; P = .039). Circulating ketone bodies did not differ between patients treated with empagliflozin or placebo throughout the study period. A higher acetone concentration at baseline was univariately associated with a greater risk of the composite end point, including in-hospital worsening HF, HF rehospitalizations, and all-cause mortality after 30 days. However, after adjustment for age and sex, acetone did not remain an independent predictor for the combined end point. CONCLUSIONS: Circulating ketone body concentrations, and acetone in particular, were significantly higher during an episode of acute decompensated HF compared with after stabilization. Treatment with empagliflozin did not affect ketone body concentrations in patients with acute HF.

Ultrahigh-acetone-sensitivity sensor based on Pt-loaded TiO2porous nanoparticles synthesized via a facile hydrothermal method.

A simple hydrothermal method based on an orthogonal experimental design was used to synthesis Pt-loaded TiO2mesoporous nanoparticles in one step. The successful synthesis of Pt-loaded TiO2nanoparticles was demonstrated by various characterization methods. The effects of the modification of Pt and its explanation are described in detail by means of the test results. Through systematic gas-sensing tests, we found that the Pt-loaded TiO2nanoparticles outperform pure TiO2nanoparticles, with a high response value (S= 42.5) to 200 ppm acetone at 260 °C and with a film thickness of 0.45 mm, far superior to that of pure TiO2. The response time (8 s) and recovery time (11 s) of the material are also relatively good with excellent selectivity and long-term stability (30 days). The frequent use of acetone as an organic solution in factories and laboratories, as well as the possibility of making a preliminary diagnosis of diabetes by detecting acetone levels in exhaled gas, make this work promising for environmental monitoring and medical diagnosis.