Multifunctional Bone Regeneration Membrane with Flexibility, Electrical Stimulation Activity and Osteoinductive Activity.

The use of membrane-based guided bone regeneration techniques has great potential for single-stage reconstruction of critical-sized bone defects. Here, a multifunctional bone regeneration membrane combining flexible elasticity, electrical stimulation (ES) and osteoinductive activity is developed by in situ doping of MXene 2D nanomaterials with conductive functionality and ß-TCP particles into a Poly(lactic acid-carbonate (PDT) composite nano-absorbable membrane (P/T/MXene) via electrostatic spinning technique. The composite membrane has good feasibility due to its temperature sensitivity, elastic memory capacity, coordinated degradation profile and easy preparation process. In vitro experiments showed the P/T/MXene membrane effectively promoted the recruitment and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) under ES and enhanced the angiogenic capacity of endothelial cells, which synergistically promoted bone regeneration through neovascularization. In addition, an in vivo rat model of cranial bone defects further confirmed the bone regeneration efficacy of the P/T/MXene membrane. In conclusion, the developed P/T/MXene membrane can effectively promote bone regeneration through their synergistic multifunctional effects, suggesting the membranes have great potential for guiding tissue regeneration and providing guidance for the biomaterials design.

Two-year clinical and radiographic evaluation of ACTIVA BioACTIVE versus Compomer (Dyract® eXtra) in the restoration of class-2 cavities of primary molars: a non-inferior split-mouth randomised clinical trial.

OBJECTIVES: The trial aimed to compare the clinical performance and radiographic success of ACTIVA BioACTIVE versus Compomer in restoring class-II cavities of primary molars. MATERIALS AND METHODS: A non-inferior split-mouth design was considered. A pre-calculated sample size of 96 molars (48 per group) with class-2 cavities of twenty-one children whose ages ranged from 5 to 10 years were randomly included in the trial. Pre-operative Plaque Index (PI), DMFT/dmft scores and the time required to fill the cavity were recorded. Over 24 months, the teeth were clinically evaluated every six months and radiographically every 12 months by two calibrated and blinded evaluators using the United States public health service (USPHS)-Ryge criteria. The two-sided 95% confidence interval (CI) for the difference in success rate was considered to assess non-inferiority, and the margin was set at -18%. The linear mixed model and Firth's logistic regression model were used for data analysis (P < 0.05). RESULTS: After 24 months, 86 teeth (43 per group) were evaluated. The mean PI score was 1.1(± 0.9), while DMFT/dmft was 0.35 (± 0.74) and 6.55 (± 2.25) respectively. The clinical and radiographic success rate of Dyract vs. ACTIVA was 95.3% and 88.3% vs. 93% and 86%, respectively. The two-sided 95% CI for the difference in success rate (-2.3%) was - 3.2 to 1.3% and didn't reach the predetermined margin of -18% which had been anticipated as the non-inferiority margin. Clinically, ACTIVA had a significantly better colour match (P = 0.002) but worse marginal discolouration (P = 0.0143). There were no significant differences regarding other clinical or radiographic criteria (P > 0.05). ACTIVA took significantly less placement time than Dyract, with a mean difference of 2.37 (± 0.63) minutes (P < 0.001). CONCLUSION: The performance of ACTIVA was not inferior to Dyract and both materials had a comparable high clinical and radiographic performance in children with high-caries experience. ACTIVA had a significantly better colour match but more marginal discolouration. It took significantly less time to be placed in the oral cavity. TRIAL REGISTRATION: The study was registered at ClinicalTrials.gov on 4 May 2018 (#NCT03516838).

Fabrication of Smart Tantalum Carbide MXene Quantum Dots with Intrinsic Immunomodulatory Properties for Treatment of Allograft Vasculopathy.

MXene nanomaterials have sparked significant interest among interdisciplinary researchers to tackle today's medical challenges. In particular, colloidal MXene quantum dots (MQDs) offer the high specific surface area and compositional flexibility of MXene while providing improvements to aqueous stability and material-cell interactions. The current study for the first time reports the development and application of immunoengineered tantalum-carbide (Ta4C3T x ) MQDs for in vivo treatment of transplant vasculopathy. This report comes at a critical juncture in the field as poor long-term safety of other MXene compositions challenge the eventual clinical translatability of these materials. Using rational design and synthesis strategies, the Ta4C3T x MQDs leverage the intrinsic anti-inflammatory and antiapoptotic properties of tantalum to provide a novel nanoplatform for biomedical engineering. In particular, these MQDs are synthesized with high efficiency and purity using a facile hydrofluoric acid-free protocol and are enriched with different bioactive functional groups and stable surface TaO2 and Ta2O5. Furthermore, MQDs are spontaneously uptaken into antigen-presenting endothelial cells and alter surface receptor expression to reduce their activation of allogeneic T-lymphocytes. Finally, when applied in vivo, Ta4C3T x MQDs ameliorate the cellular and structural changes of early allograft vasculopathy. These findings highlight the robust potential of tailored Ta4C3T x MQDs for future applications in medicine.

Nanoengineered CAR-T Biohybrids for Solid Tumor Immunotherapy with Microenvironment Photothermal-Remodeling Strategy.

Chimeric antigen receptor T cell (CAR-T) therapy has shown remarkable clinical success in eradicating hematologic malignancies. However, hostile microenvironment in solid tumors severely prevents CAR-T cells migrating, infiltrating, and killing. Herein, a nanoengineered CAR-T strategy is reported for enhancing solid tumor therapy through bioorthogonal conjugation with a nano-photosensitizer (indocyanine green nanoparticles, INPs) as a microenvironment modulator. INPs engineered CAR-T biohybrids (CT-INPs) not only retain the original activities and functions of CAR-T cells, but it is further armed with fluorescent tracing and microenvironment remodeling abilities. Irradiated with laser, CT-INPs demonstrate that mild photothermal intervention destroys the extracellular matrix, expanded blood vessels, loosened compact tissue, and stimulated chemokine secretion without damping CAR-T cell activities. Those regulations induce an immune-favorable tumor microenvironment for recruitment and infiltration of CT-INPs. CT-INPs triggered photothermal effects collapse the physical and immunological barriers of solid tumor, and robustly boosted CAR-T immunotherapy. Therefore, CAR-T biohybrids provide reliable treatment strategy for solid tumor immunotherapy via microenvironment reconstruction.

Bond strength of Ion-releasing Restorative Materials to Sound and Caries-affected Dentin.

OBJECTIVE: This study evaluated the microtensile bond strength (µTBS) of ion-releasing restorative materials to sound and caries-affected dentin (CAD). STUDY DESIGN: 60 teeth were randomly divided into 2 groups (sound dentin, CAD) and 5 subgroups of 6 samples each: conventional glass ionomer cement (GIC), resin-modified GIC (RMGIC), glass hybrid reinforced GIC (EQ), giomer (BII), and bioactive restorative material (ACT). µTBS analyses were performed and data were analyzed statistically. RESULTS: The ACT group bonded to sound dentin and the BII group bonded to CAD showed the highest µTBS (p<0.05). The GIC, RMGIC, and ACT groups, showed significantly lower µTBS when bonded to CAD compared with sound dentin (p<0.05). However, in the BII group, there were no statistically significant differences between the samples bonded to sound and CAD (p>0.05). All groups except EQ that bonded to sound dentin showed predominantly adhesive failure. CONCLUSION: The use of the giomer can be recommended due to its more stable bond durability.

Influence of fractional carbon-dioxide laser in comparison to ErCr-YSGG on the dentin bond integrity of bioactive materials.

OBJECTIVE: The aim was to assess the influence of Er, Cr: YSGG laser (ECL) and fractional carbon dioxide laser (FCL) on the shear bond strength (SBS) and microleakage of bioactive restorative material to dentin. METHODS: The study was performed in King Saud university in the month of June-July 2019. One hundred and twenty permanent teeth were vertically placed in acrylic resin. Based on the type of surface treatment regime (n=40), samples were divided into three groups. Group-I samples were surface conditioned with total etch and rinse (TE); Group-2 samples were surface treated with Er, Cr: YSGG laser (ECL) and Group-3 specimens were conditioned with fractional carbon dioxide laser (FCL). Surface treatment of dentin was followed by type of bulk fill resin (BFR) application. Tetric-N-Ceram was bonded to dentin conditioned with TE (n=20), FCL (n=20) and ECL (n=20). Similarly, bioactive material (BAM) was also bonded to conditioned surface (n=60). Samples (n=10) among each group were placed in a Universal testing machine. For microleakage testing 5 pairs of samples from each group (n=10) were placed in solution of 2% methylene blue for 24h Fracture analysis was performed using stereomicroscope at 40x magnification. Descriptive statistics i.e., means and standard for SBS and microleakage were compared using analysis of variance (ANOVA) and Tukey's post hoc test at a significance level of (p < 0.05). RESULTS: The highest SBS scores were displayed by TE-BFR (Bulk filled resin) (19.21 ± 0.925 Mpa) and the lowest shear bond scores were presented by FCL-BFR (11.06±1.611 Mpa). The lowest microleakage scores were exhibited by group ECL-BFR (24.11±13.01nm). Similarly, the highest microleakage score was displayed in group FCL-BAM (42.18±16.32 nm). Admixed failure was pertinent in groups conditioned by ECL. Moreover, groups conditioned with FCL adhesive type of failure was found in abundance. CONCLUSIONS: ECL has a potential to be used as an alternate to total etch and rinse for conditioning of dentin when bonded to bioactive materials.

[Chemical constituents from Fukeqianjin formula].

Fukeqianjin formula, a traditional Chinese medicine compound, consists of eight Chinese medicinal materials including roots of Moghania macrophylla, roots of Rosa laevigata, aerial parts of Andrographis paniculata, caulis of Mahonia fortunei, roots of Zanthoxylum dissitum, roots of Angelica sinensis, caulis of Spatholobus suberectus, and roots of Codonopsis pilosula. The chemical constituents from Fukeqianjin formula were studied in this paper. The compounds were separated and purified by repeated column chromatographic methods including silica gel, Sephadex LH-20, macroporous adsorptive resin, and reverse phase high performance liquid chromatography. And their chemical structures were determined by spectral data analyses. Thirty-eight compounds were obtained and identified as Z-3-butylidenephthalide (1), Z-ligustilide (2), senkyunolide I (3), senkyunolide H (4), vanillin (5), 7-O-methylwogonin (6), wogonin (7), panicolin (8), 19-hydroxy-8(17),13-labdadien-15,16-olide (9), andrograpanin (3,14-dideoxyandrographolide; 10), andrographolide (11), 14-deoxy-11,12-didehydroandrographolide (12), isoandrographolide (13), andrographin (2'-O-methylskullcapflavone, 14), biochanin A (15), 5-hydroxy-7,8,2',5'-tetramethoxyflavone (16), formononetin (17), daidzein (18), genistein (19), benzoic acid (20), vanillic acid (21), trans-ferulic acid (22), salicylic acid (23), daidzin (24), genistein-7-O-ß-D-apiofuranosyl-(1→6)-O-ß-D-glucopyranoside (25), apigenin-7-O-ß-D-glucuronide (26), andrographidin C (27), apigenin-7-O-ß-D-(6"-methyl)glucuronide (28), neoandrographolide (29), genistin (30), andrographiside (31), 14-deoxy-11,12-didehydroandrographiside (32), lobetyolin (33), epicatechin (34), catechin (35), palmatine (36), berberine (37), and jatrorrhizine (38), respectively. From the results of an individual medicinal material studies, it can be judged that compounds 17, 19, 24 and 30 as flavonoids came from the roots of M. macrophylla, compounds 36-38 as alkaloids came from the caulis of M. fortunei, compounds 6-8, 14, 16, and 27 as flavonoids as well as 9-13, 29, 31, and 32 as diterpenes came from the aerial parts of A. paniculata, compound 5 as phenols came from the roots of Z. dissitum, compounds 1-4 as phthalides as well as compound 22 as phenylpropanoids came from the roots of A. sinensis, compound 33 as alkynes came from the roots of C. pilosula, compounds 15, 17-19 as flavonoids as well as compound 21 as phenolic acids came from the caulis of S. suberectus. While compounds 34 and 35 as flavanoids could come from both the caulis of S. suberectus and roots of R. laevigata. The chemical composition of traditional Chinese medicine compound can be tracked from the original sources. This work provides a demonstration for the material basis study of traditional Chinese medicine compound. Compounds 25, 26 and 28 have not so far been isolated and identified from the above-mentioned single herb.

The Management of Open Apex Using a Bioactive Material: A Case Report.

The management of teeth with open apices poses unique challenges in endodontics, requiring effective strategies to promote continued root development and maintain pulp vitality. This abstract explores the utilization of bioactive materials in the treatment of open apices, specifically focusing on their role in achieving optimal outcomes. Bioactive materials, such as Biodentine (Septodont, Saint-Maur-des-Fossés, France), have gained prominence for their favourable physiochemical properties, biocompatibility, and ability to stimulate dentinogenesis. The application of a bioactive material as an apical plug not only addresses immediate concerns but also contributes to long-term health and stability. This abstract reviews relevant literature, discusses clinical cases, and emphasizes the importance of tailoring treatment plans to the individual characteristics of open apex cases. The findings underscore the promising role of bioactive materials in reshaping the landscape of endodontic interventions for teeth with open apices, highlighting their potential to enhance both clinical and radiographic success.

A New Strategy to Inhibit Scar Formation by Accelerating Normal Healing Using Silicate Bioactive Materials.

Inspired by the scar-free wound healing in infants, an anti-scar strategy is proposed by accelerating wound healing using silicate bioactive materials. Bioglass/alginate composite hydrogels are applied, which significantly inhibit scar formation in rabbit ear scar models. The underlining mechanisms include stimulation of Integrin Subunit Alpha 2 expression in dermal fibroblasts to accelerate wound healing, and induction of apoptosis of hypertrophic scar fibroblasts by directly stimulating the N-Acylsphingosine Amidohydrolase 2 expression in hypertrophic scar fibroblasts, and indirectly upregulating the secretion of Cathepsin K in dermal fibroblasts. Considering specific functions of the bioactive silicate materials, two scar treatment regimes are tested. For severe scars, a regenerative intervention is applied by surgical removal of the scar followed by the treatment with bioactive hydrogels to reduce the formation of scars by activating dermal fibroblasts. For mild scars, the bioactive dressing is applied on the formed scar and reduces scar by inducing scar fibroblasts apoptosis.

Titanium- and Strontium-Infused Calcium Silicates Toward Restorative and Regenerative Purposes.

BACKGROUND: Dental materials with dentine regenerative properties are preferred over conventional materials. Calcium silicate cements, such as Biodentine, are bioactive and offer excellent sealing ability, making them ideal for various dental treatments. OBJECTIVES: This study aimed to fabricate bioactive calcium silicates infused with titanium (Ti) and strontium (Sr) to optimize their neo-angiogenic, antimicrobial, and regenerative properties while maintaining mechanical stability. METHODOLOGY: Ti- and Sr-infused calcium silicate cements were synthesized, and their mineral phases were characterized using X-ray diffraction. Morphological and elemental analyses were performed using field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDS). Raman spectroscopy was used to confirm the formation of bioactive material. A hemocompatibility assessment was conducted to evaluate blood compatibility. RESULTS: The presence of Ca2, SiO4, and SrTiO3 mineral phases indicated the successful infusion of Ti and Sr into the calcium silicate cement. FESEM and EDS revealed interconnected small spheres and rods in the silicate network with the relevant elemental compositions. Raman spectra verified that Si-O-Si and Ti-O-Ti vibrations exist, validating the formation of a bioactive material. The hemocompatibility assessment demonstrated optimal blood compatibility. CONCLUSIONS: This study successfully fabricated an improved calcium silicate-based material with enhanced regenerative properties and excellent biocompatibility. This newly formed substrate holds promise for providing superior restorative solutions and aiding in conservative treatment modalities during dental procedures.

Engineering Single-Component Antibacterial Anti-inflammatory Polyitaconate-Based Hydrogel for Promoting Methicillin-Resistant Staphylococcus aureus-Infected Wound Healing and Skin Regeneration.

Hydrogel wound dressings play a crucial role in promoting the healing of drug-resistant bacterially infected wounds. However, their clinical application often faces challenges such as the use of numerous components, a complicated preparation process, and insufficient biological activity. Itaconic acid, known for its excellent biological and reaction activities, has not been extensively studied for the preparation of itaconic acid-based hydrogels and their application in infected wound healing. Therefore, there is a need to develop a multifunctional single-component itaconic acid-based hydrogel that is easy to synthesize and holds promising prospects for clinical use in promoting the healing of infected wounds. In this study, we present a single-component polyitaconate-based hydrogel (PICGI) with antibacterial, anti-inflammatory, and biological activity. The PICGI hydrogel demonstrates great potential in promoting healing of infected wounds and skin regeneration. It exhibits desirable thermosensitive, injectable, and adhesive properties, as well as broad-spectrum antibacterial activity and anti-inflammatory effects. Furthermore, the PICGI hydrogel is biocompatible and significantly enhances the migration and tube formation of endothelial cells. In the case of drug-resistant bacterially infected wounds, the PICGI hydrogel effectively inhibits bacterial infection and inflammation, promotes angiogenesis, and facilitates collagen deposition, thereby accelerating the healing and regeneration of the skin. This study highlights the promising application of the PICGI hydrogel as a single-component hydrogel in tissue repair associated with bacterial infection and inflammation. Moreover, the simplicity of its components, convenient preparation process, and sufficient biological activity make the PICGI hydrogel highly suitable for promotion and clinical application.

Bacteria-based bioactive materials for cancer imaging and therapy.

Owing to the unique biological functions, bacteria as biological materials have been widely used in biomedical field. With advances in biotechnology and nanotechnology, various bacteria-based bioactive materials were developed for cancer imaging and therapy. In this review, different types of bacteria-based bioactive materials and their construction strategies were summarized. The advantages and property-function relationship of bacteria-based bioactive materials were described. Representative researches of bacteria-based bioactive materials in cancer imaging and therapy were illustrated, revealing general ideas for their construction. Also, limitation and challenges of bacteria-based bioactive materials in cancer research were discussed.

The Biocompatibility of a New Type of 45S5 Bioactive Graft in a Sheep Model: A Pilot Study.

Background Bone is a dramatically regenerating tissue with the ability to heal after trauma, although intensive surgical management is required to treat considerable damage. In this study, 45S5 bioactive grafts were prepared through the melt-quenched method in compliance with the guidelines on medical product requirements (MDD regulations; 93/42/EEC Annex-II section 3&4 and ISO standardizations; ISO 13485:2016) for bone repair and regeneration. Methodology After preparing the graft/scaffold, it was evaluated for biocompatibility according to the principles of "lSO 10993-6 2015 Biological evaluation of medical devices: Tests for local effects after implantation, Annex D 'Test method for implantation in bone,'" "lSO 10993-2:2005 Biological evaluation of medical devices: Animal welfare requirements," and "lSO 10993-12 2012 Biological evaluation of medical devices sample preparation rules and standards." Defects were created on the tibia of the right hind leg. The defects were filled with 3-mm bioactive granules, and a cylindrical polypropylene biocompatible material was used as a negative control. After 120 days, the sheep were sacrificed, and the tibia were analyzed. Results The results demonstrated the safety of 45S5 bioactive grafts. Histological evaluation showed no signs of pathological changes around the implant area. Hematoxylin and eosin sections demonstrated the presence of a few multinucleated giant cells, macrophages, and non-irritant mild fibrotic changes on the surface of the biomaterial. Conclusions 45S5 bioactive glass was found to be biocompatible in a sheep model, demonstrating its capacity to promote bone consolidation while also justifying its further preclinical application as a bone-bonded material owing to the layer formation of the growing bone mineral.

Biomaterials-enhanced bioactive agents to efficiently block spinal metastases of cancers.

The spine is the most common site of bone metastases, as 20%-40% of cancer patients suffer from spinal metastases. Treatments for spinal metastases are scarce and palliative, primarily aiming at relieving bone pain and preserving neurological function. The bioactive agents-mediated therapies are the most effective modalities for treating spinal metastases because they achieve systematic and specific tumor regression. However, the clinical applications of some bioactive agents are limited due to the lack of targeting capabilities, severe side effects, and vulnerability of drug resistance. Fortunately, advanced biomaterials have been developed as excipients to enhance these treatments, including chemotherapy, phototherapy, magnetic hyperthermia therapy, and combination therapy, by improving tumor targeting and enabling sustaining and stimuli-responsive release of various therapeutic agents. Herein, the review summarizes the development of biomaterials-mediated bioactive agents for enhanced treatments of spinal metastases and predicts future research trends.

Selenium Bio-Nanocomposite Based on Alteromonas macleodii Mo169 Exopolysaccharide: Synthesis, Characterization, and In Vitro Antioxidant Activity.

In this study, the novel exopolysaccharide (EPS) produced by the marine bacterium Alteromonas macleodii Mo 169 was used as a stabilizer and capping agent in the preparation of selenium nanoparticles (SeNPs). The synthesized nanoparticles were well dispersed and spherical with an average particle size of 32 nm. The cytotoxicity of the EPS and the EPS/SeNPs bio-nanocomposite was investigated on human keratinocyte (HaCaT) and fibroblast (CCD-1079Sk) cell lines. No cytotoxicity was found for the EPS alone for concentrations up to 1 g L-1. A cytotoxic effect was only noticed for the bio-nanocomposite at the highest concentrations tested (0.5 and 1 g L-1). In vitro experiments demonstrated that non-cytotoxic concentrations of the EPS/SeNPs bio-nanocomposite had a significant cellular antioxidant effect on the HaCaT cell line by reducing ROS levels up to 33.8%. These findings demonstrated that the A. macleodii Mo 169 EPS can be efficiently used as a stabilizer and surface coating to produce a SeNP-based bio-nanocomposite with improved antioxidant activity.

Adhesive bond of Bioactive and bulk fill resin to disinfected caries affected dentin (lactobacillus specie) with laser and photodynamic therapy.

AIMS: To evaluate the antimicrobial effectiveness of cavity disinfectants chlorhexidine gluconate (CHX), Er, Cr, YSGG laser (ECL), and curcumin photosensitizer (CP) against Lactobacillus and shear bond strength (SBS) of Bioactive (BA) and bulk fill composite (BFC) restorative material bonded to carious affected dentin (CAD). MATERIALS AND METHODS: Sixty human mandibular molars scored 4 and 5 on the International Caries Detection and Assessment System (ICDAS) were included. After inoculating the specimens with lactobacillus specie all the samples were arbitrarily divided into three groups based on the disinfection regime used (n=20). Groups 1 and 2: CAD disinfection using ECL, Groups 3 and 4: CAD disinfection using CP, and Groups 5 and 6: CAD disinfection using CHX. After cavity sterilization, the survival rate was estimated and each group was further divided into two sub-groups based on the restorative material used. Groups 1, 3, and 5 (n = 10) were restored using BFC restorative material, and groups 2, 4, and 6 (n = 10) were restored using a conventional bulk-fill resin material. A universal testing machine (UTM) was used to determine the SBS and debonded surfaces were examined under a stereomicroscope to determine the modes of failure. Kruskal-Walis, ANOVA, and Post Hoc Tukey were applied to investigate the survival rate and bond strength values. RESULTS: ECL group displayed the highest survival rate (0.73±0.13) of Lactobacillus. The least survival rate (0.17±0.09) was demonstrated by CP activated by PDT. Group 1 (ECL+ BA) treated specimens exhibited the maximum value of SBS (18.31 ± 0.22 MPa). However, group 3 (CP + BA) revealed the minimum values of bond strength (14.05 ± 1.02 MPa). The intergroup comparison revealed that group 1, group 2 (ECL+BFC) (18.11 ± 0.14 MPa), group 5 (CHX+ BA) (18.14 ± 0.36 MPa), and group 6 (CHX+BFC) (18.18 ± 0.35 MPa) displayed comparable outcomes of bond integrity (p>0.05). CONCLUSION: Caries-affected dentin disinfected with Er, Cr: YSGG, and chlorhexidine improve bond scores of bioactive and conventional bulk-fill restorative material.

Constructing a highly bioactive tendon-regenerative scaffold by surface modification of tissue-specific stem cell-derived extracellular matrix.

Developing highly bioactive scaffold materials to promote stem cell migration, proliferation and tissue-specific differentiation is a crucial requirement in current tissue engineering and regenerative medicine. Our previous work has demonstrated that the decellularized tendon slices (DTSs) are able to promote stem cell proliferation and tenogenic differentiation in vitro and show certain pro-regenerative capacity for rotator cuff tendon regeneration in vivo. In this study, we present a strategy to further improve the bioactivity of the DTSs for constructing a novel highly bioactive tendon-regenerative scaffold by surface modification of tendon-specific stem cell-derived extracellular matrix (tECM), which is expected to greatly enhance the capacity of scaffold material in regulating stem cell behavior, including migration, proliferation and tenogenic differentiation. We prove that the modification of tECM could change the highly aligned surface topographical cues of the DTSs, retain the surface stiffness of the DTSs and significantly increase the content of multiple ECM components in the tECM-DTSs. As a result, the tECM-DTSs dramatically enhance the migration, proliferation as well as tenogenic differentiation of rat bone marrow-derived stem cells compared with the DTSs. Collectively, this strategy would provide a new way for constructing ECM-based biomaterials with enhanced bioactivity for in situ tendon regeneration applications.

Bioactive Materials Promote Wound Healing through Modulation of Cell Behaviors.

Skin wound repair is a multistage process involving multiple cellular and molecular interactions, which modulate the cell behaviors and dynamic remodeling of extracellular matrices to maximize regeneration and repair. Consequently, abnormalities in cell functions or pathways inevitably give rise to side effects, such as dysregulated inflammation, hyperplasia of nonmigratory epithelial cells, and lack of response to growth factors, which impedes angiogenesis and fibrosis. These issues may cause delayed wound healing or even non-healing states. Current clinical therapeutic approaches are predominantly dedicated to preventing infections and alleviating topical symptoms rather than addressing the modulation of wound microenvironments to achieve targeted outcomes. Bioactive materials, relying on their chemical, physical, and biological properties or as carriers of bioactive substances, can affect wound microenvironments and promote wound healing at the molecular level. By addressing the mechanisms of wound healing from the perspective of cell behaviors, this review discusses how bioactive materials modulate the microenvironments and cell behaviors within the wounds during the stages of hemostasis, anti-inflammation, tissue regeneration and deposition, and matrix remodeling. A deeper understanding of cell behaviors during wound healing is bound to promote the development of more targeted and efficient bioactive materials for clinical applications.

Impact of direct restorative dental materials on surface root caries treatment. Evidence based and current materials development: A systematic review.

This systematic review provides an update on the development and efficacy of direct restorative dental materials for root caries interventions from in vitro and clinical studies. PubMed, Embase, and Web of Science were searched using specific MeSH keywords. Full articles from September 1990 to October 2021 were collected. Additional articles were identified by reference retrieval and manual searching. Studies not related to restorative materials for root caries treatment, case reports, non-original articles, and/or articles not written in English were excluded. Bias risk assessment was performed for the clinical studies. Forty-two articles (eleven clinical studies and thirty-one in vitro studies) were included for analysis. Most in vitro studies indicated an excellent cariostatic effect of glass ionomer cement. Resin-modified glass ionomer restorations also presented reduced recurrent caries activity but had a lower efficacy than glass ionomer cement restorations. For composite resin restorations, the main material development strategies are to strengthen the tooth structure and integrate antimicrobial activity. The clinical studies offered limited data, so the most appropriate material for surface root caries treatment is still inconclusive. However, atraumatic restorative treatment (ART) is an alternative treatment for patients with limiting conditions. Further clinical studies are required to confirm the efficacy of bioactive materials.

Bioactive potential of Bio-C Pulpo is evidenced by presence of birefringent calcite and osteocalcin immunoexpression in the rat subcutaneous tissue.

As the biocompatibility and bioactive potential of repair materials are desired characteristics in dentistry, the tissue response of Bio-C Pulpo, a bioceramic material launched on the marked by Angelus (Brazil), was compared with Biodentine (Septodont, France) and White MTA (WMTA; Angelus, Brazil). In 32 rats, 148 polyethylene tubes filled with Bio-C Pulpo, Biodentine or WMTA, and empty (CG, control group) were implanted into subcutaneous tissues for 7, 15, 30, and 60 days. The capsule thickness, numerical density of inflammatory cells (IC) and fibroblasts (Fb), amount of collagen, immunohistochemistry detection of interleukin-6 (IL-6) and osteocalcin (OCN), von Kossa and analysis under polarized light were performed. Data were subjected to two-way ANOVA followed by Tukey's test (p ≤ 0.05). At 7 and 15 days, the capsules around Bio-C Pulpo were thicker than in WMTA while, at 30 and 60 days, significant differences were not observed among the groups. Although at 7, 15, and 30 days, a greater number of IL-6-immunostained cells was found in Bio-C Pulpo and Biodentine than in WMTA, no significant difference was detected among the groups at 60 days. In all groups, the number of Fb and collagen content increased significantly over time. The capsules around materials exhibited von Kossa-positive and birefringent structures, and OCN-immunostained cells whereas, in the CG, these structures were not observed. Bio-C Pulpo, similarly to Biodentine and WMTA, is biocompatible, allows the connective tissue repair and presents bioactive potential in connective tissue of rats.