Isohexide-Based Tunable Chiral Platforms as Amide- and Thiourea-Chiral Solvating Agents for the NMR Enantiodiscrimination of Derivatized Amino Acids.

New arylamide- and arylthiourea-based chiral solvating agents (CSAs) were synthesized starting from commercially available isomannide and isosorbide. The two natural isohexides were transformed into the three amino derivatives, having isomannide, isosorbide, and isoidide stereochemistry, then the amino groups were derivatized with 3,5-dimethoxybenzoyl chloride or 3,5-bis(trifluoromethyl)phenyl isothiocyanate to obtain the CSAs. Bis-thiourea derivative containing the 3,5-bis(trifluoromethyl)phenyl moiety with exo-exo stereochemistry was remarkably efficient in the differentiation of NMR signals (NH and acetyl) of enantiomers of N-acetyl (N-Ac) amino acids in the presence of 1,4-diazabicyclo[2,2,2]octane (DABCO). Nonequivalences in the ranges of 0.104-0.343 ppm and 0.042-0.107 ppm for NH and acetyl groups, respectively, allowed for very accurate enantiomeric excess determination, and a reliable correlation was found between the relative positions of signals of enantiomers and their absolute configuration. Therefore, a complete stereochemical characterization could be performed. Dipolar interactions detected in the ternary mixture CSA/N-Ac-valine/DABCO led to the identification of a different interaction model for the two enantiomers, involving the formation of a one-to-one substrate/CSA complex for (S)-N-Ac-valine and a one-to-two complex for (R)-N-Ac-valine, as suggested by the complexation stoichiometry.

Quality by design-guided development of a capillary electrophoresis method for the simultaneous chiral purity determination and impurity profiling of tamsulosin.

Analytical Quality by Design principles using the design of experiments were applied for the development of a capillary electrophoresis method for the determination of enantiomeric purity and chemically related impurities of tamsulosin. From initial scouting experiments, a dual cyclodextrin (CD) system composed of sulfated ß-CD and carboxymethyl-α-CD was selected as the chiral selector. A fractional factorial resolution V+ design was used for the identification of the critical process parameters, while a face-centered central composite design and Monte Carlo simulations were employed for final optimization and defining the design space of the method. The experimental conditions of the working point were: 30 mM sodium phosphate buffer, pH 3.0, containing 40 mg/mL sulfated ß-CD and 7 mg/mL carboxymethyl-α-CD, capillary temperature 18°C, applied voltage -23 kV. Following the assessment of robustness by applying a Plackett-Burman design, the method was validated according to the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use guideline Q2(R1). The method allowed the quantification of the chiral impurity and three other related impurities at the 0.1 % level with acceptable accuracy and precision.

Quality by design-assisted development of a capillary electrophoresis method for the enantiomeric purity determination of tenofovir.

A CE method was developed and validated for the assessment of the chiral purity of the drug tenofovir applying a quality by design approach. Following selection of a quaternary ammonium ß-CD as chiral selector, a fractional factorial resolution V+ design was employed for identification of the critical process parameters, while a central composite design served for method optimization. The final method used a 40/50.2 cm, 50 µm id fused-silica capillary, a BGE composed of a 100 mM sodium phosphate buffer, pH 6.4, containing 45 mg/mL quaternary ammonium ß-CD, an applied voltage of 18 kV, and a capillary temperature of 22°C. Robustness was assessed by a Plackett-Burman design. The method was validated according to guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and enabled the determination of the (S)-enantiomer of tenofovir at the 0.1% level.

A novel stability-indicating HPLC method for the determination of enantiomeric purity of eluxadoline drug: Amylose tris(3,5-dichlorophenyl carbamate) stationary phase.

A simple and sensitive stability-indicating chiral HPLC method has been developed and validated per International Conference on Harmonization guidelines for the determination of enantiomeric purity of eluxadoline (Exdl). The impact of different mobile phase compositions and chiral stationary phases on the separation of Exdl enantiomer along with process- and degradation-related impurities has been studied. Homogeneity of Exdl and stable results of Exdl enantiomer in all degraded samples reveal the fact that the proposed method was specific (stability indicating). Amylose tris(3,5-dichlorophenyl carbamate) stationary phase column Chiralpak IE-3 (150 × 4.6 mm, 3 µm) provided better resolution with polar organic solvents than cellulose derivative, crown ether, and zwitterion stationary phases and nonpolar solvents. The mobile phase consisted of acetonitrile, tetrahydrofuran, methanol, butylamine, and acetic acid in the ratio of 500:500:20:2:1.5 (v/v/v/v/v). Isocratic elution was performed at a flow rate of 1.0 mL/min, column temperature of 35°C, injection volume of 10 µL, and UV detection of 240 nm. The United States Pharmacopeia (USP) resolution of the Exdl enantiomer was found to be more than 4.0 within a 65-min run time. Exdl enantiomer detector response linearity over the concentration range of 0.859-4.524 µg/mL was found to be R2  = 0.9985. The limit of detection, limit of quantification, and average percentage recovery values were established as 0.283 µg/mL, 0.859 µg/mL, and 96.0, respectively.

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods.

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures' development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012-2022) on the applicability of CE methods in chiral drug impurity profiling.

Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020).

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization.

Determination of enantiomeric impurity of tenofovir disoproxil fumarate on a cellulose tris(3,5-dichlorophenyl-carbamate) chiral stationary phase and the characterization of its related substances.

A simple and reliable high-performance liquid chromatography method was developed to determine the enantiomeric impurity of tenofovir disoproxil fumarate, an orally bioavailable prodrug of tenofovir, commonly used for the treatment of human immunodeficiency virus and hepatitis B. Tenofovir disoproxil and its enantiomer, were completely separated on a Chiralpak IC column (3 µm, 100 × 4.6 mm, i.d.). The chiral separation was achieved using a mobile phase containing n-hexane, ethanol, methanol, and triethylamine 65/25/10/0.1 (v/v/v/v) at a flow rate of 0.6 mL/min. Ideally, the reversal of enantiomer elution order was achieved on the Chiralpak IC column, to allow the elution of the minor enantiomeric impurity before the major component. Moreover, the proposed method was able to discriminate the active ingredient from the related substances available in the tenofovir disoproxil fumarate raw materials. These compounds were isolated and structurally elucidated by MS and nuclear magnetic resonance. Based on the spectral data, the structures of related substances were confirmed as tenofovir isoproxil monoester and fumaric acid. The high-performance liquid chromatography method was optimized by the design of experiment approach and successfully validated following the International Conference on Harmonization guideline. Proposed method was effectively applied for the quantification of enantiomeric impurity in tenofovir disoproxil fumarate raw materials.

Quantitative NMR (qNMR) for pharmaceutical analysis: The pioneering work of George Hanna at the US FDA.

In the last two decades, quantitative NMR (qNMR) has become increasingly important for the analysis of pharmaceuticals, chemicals, and natural products including dietary supplements. For the purpose of quality control and chemical standardization of a large variety of pharmaceutical, chemical, and medicinal products, qNMR has proven to be a valuable orthogonal quantification method and a compelling alternative to chromatographic techniques. This work reviews a fundamental component of the early development of qNMR, reflected in the pioneering work of the late George M. Hanna during the years between 1984 and 2006 at the US Food and Drug Administration (FDA). Because Hanna performed the majority of his groundbreaking work on a 90-MHz instrument, his legacy output connects with recent progress in low-field benchtop NMR instrumentation. Hanna gradually established the utility of qNMR for the routine quality control analyses practiced in pharmaceutical and related operations well ahead of his peers. His work has the potential to inspire new developments in qNMR applied to small molecules of biomedical importance.

Enantiomeric separation of vilanterol trifenatate by chiral liquid chromatography.

Vilanterol trifenatate is a novel chiral long-acting ß2-agonist developed. Vilanterol combined with inhaled corticosteroids can treat COPD and asthma. A simple liquid chromatographic method is developed for the quantitative determination of R-vilanterol and S-vilanterol (impurity S). HPLC separation was achieved on Chiralpak ID (250 × 4.6 mm; particle size 5 µm) column using hexane-ethanol-ethanolamine (75:25:0.1, v/v/v) as mobile phase at a flow rate of 1.0 mL/min. The resolution is greater than 3.3. Ethanolamine in the mobile phase is vital to enhance chromatographic efficiency and resolution between the isomers. The method was validated with respect to accuracy, specificity, precision, LOD, LOQ, linearity, and robustness as ICH guidelines.

Synthetic Chiral Derivatives of Xanthones: Biological Activities and Enantioselectivity Studies.

Many naturally occurring xanthones are chiral and present a wide range of biological and pharmacological activities. Some of them have been exhaustively studied and subsequently, obtained by synthesis. In order to obtain libraries of compounds for structure activity relationship (SAR) studies as well as to improve the biological activity, new bioactive analogues and derivatives inspired in natural prototypes were synthetized. Bioactive natural xanthones compromise a large structural multiplicity of compounds, including a diversity of chiral derivatives. Thus, recently an exponential interest in synthetic chiral derivatives of xanthones (CDXs) has been witnessed. The synthetic methodologies can afford structures that otherwise could not be reached within the natural products for biological activity and SAR studies. Another reason that justifies this trend is that both enantiomers can be obtained by using appropriate synthetic pathways, allowing the possibility to perform enantioselectivity studies. In this work, a literature review of synthetic CDXs is presented. The structures, the approaches used for their synthesis and the biological activities are described, emphasizing the enantioselectivity studies.

Quality by design-assisted development of a capillary electrophoresis method for the chiral purity determination of dexmedetomidine.

Dexmedetomidine is a selective α2 -adrenergic agonist used for patient sedation, while its enantiomer levomedetomidine has no sedative effects. As CE has been shown to be a powerful technique for enantiomer analysis, the aim of the study was the quality by design-based development of a CE-based limit test for the enantiomeric impurity levomedetomidine. The analytical target profile was defined that the method should be able to determine levomedetomidine with acceptable precision and accuracy at the 0.1% level. From initial scouting experiments, sulfated ß-cyclodextrin was selected as chiral selector. The critical process parameters were identified in a fractional factorial resolution V+ design, while a central composite face centered design and Monte Carlo simulations were used for defining the design space of the method. The selected working conditions were a 21.3/31.5 cm, 50 µm id fused-silica capillary, a 50 mM sodium phosphate buffer, pH 6.5, containing 40 mg/mL sulfated ß-cyclodextrin, a capillary temperature of 17°C and an applied voltage of 10 kV. Validation according to the ICH guideline Q2(R1) demonstrated repeatability and intermediate precision of content and migration time between 9.3 and 4.2% with accuracy in the range of 92.0 and 98.9%.

Box-Behnken response surface modeling assisted enantiomeric resolution of some racemic ß-blockers using HPTLC and ß-cyclodextrin as chiral mobile phase additive: Application to check the enantiomeric purity of betaxolol.

Stereospecific separation method of (±) betaxolol, (±) carvedilol, and (±) sotalol using High Performance Thin Layer Chromatography (HPTLC) and ß-cyclodextrin as chiral selector has been developed and validated. The Box-Behnken surface response design was selected for optimizing the operating variables based on 15 trials design. The optimized method involves separation on Fluka HPTLC silica gel plates 60 F254 (20 × 10 cm) using acetonitrile-methanol-acetic acid-water (3.4:3.6:0.18:1 v/v) as a mobile phase containing 0.57 mM ß-cyclodextrin. Densitometric measurements were made at 220 nm for betaxolol and sotalol or at 245 nm for carvedilol. Maximum separation of the enantiomers of the three drugs was obtained by optimizing concentration of chiral selector, the mobile phase composition including acetonitrile amount in the organic part of the mobile phase and the volume of acetic acid added. The proposed method enables estimation of (-) and (+) enantiomers of betaxolol in drug substance and in various pharmaceuticals. The detection limit of betaxolol was 0.15 and 0.13 µg band-1 for (-) and (+) enantiomers, respectively. The detection limits were found to be 0.2 and 0.3 µg band-1 for carvedilol and sotalol, respectively, as racemate. In addition, the proposed method was applied in checking the enantiomeric purity of (-) BET in the presence of (+) BET at 1% level where the inactive (+) enantiomer was quantified with good accuracy and precision at 1% level in the active (-) enantiomer.

Development of a capillary electrophoresis method for the determination of the chiral purity of dextromethorphan by a dual selector system using quality by design methodology.

Dextromethorphan is a centrally acting antitussive drug, while its enantiomer levomethorphan is an illicit drug with opioid analgesic effects. As capillary electrophoresis has been proven as an ideal technique for enantiomer analysis, the present study was conducted in order to develop a capillary electrophoresis-based limit test for levomethorphan. The analytical target profile was defined as a method that should be able to determine levomethorphan with acceptable precision and accuracy at the 0.1 % level. From initial scouting experiments, a dual selector system consisting of sulfated ß-cyclodextrin and methyl-α-cyclodextrin was identified. The critical process parameters were evaluated in a fractional factorial resolution IV design followed by a central composite face-centered design and Monte Carlo simulations for defining the design space of the method. The selected working conditions consisted of a 30/40.2 cm, 50 µm id fused-silica capillary, 30 mM sodium phosphate buffer, pH 6.5, 16 mg/mL sulfated ß-cyclodextrin, and 14 mg/mL methyl-α-cyclodextrin at 20°C and 20 kV. The method was validated according to ICH guideline Q2(R1) and applied to the analysis of a capsule formulation. Furthermore, the apparent binding constants between the enantiomers and the cyclodextrins as well as complex mobilities were determined to understand the migration behavior of the analytes.

Resolution, determination of enantiomeric purity and chiral recognition mechanism of new xanthone derivatives on (S,S)-whelk-O1 stationary phase.

The enantioresolution and determination of the enantiomeric purity of 32 new xanthone derivatives, synthesized in enantiomerically pure form, were investigated on (S,S)-Whelk-O1 chiral stationary phase (CSP). Enantioselectivity and resolution (α and RS ) with values ranging from 1.41-6.25 and from 1.29-17.20, respectively, were achieved. The elution was in polar organic mode with acetonitrile/methanol (50:50 v/v) as mobile phase and, generally, the (R)-enantiomer was the first to elute. The enantiomeric excess (ee) for all synthesized xanthone derivatives was higher than 99%. All the enantiomeric pairs were enantioseparated, even those without an aromatic moiety linked to the stereogenic center. Computational studies for molecular docking were carried out to perform a qualitative analysis of the enantioresolution and to explore the chiral recognition mechanisms. The in silico results were consistent with the chromatographic parameters and elution orders. The interactions between the CSP and the xanthone derivatives involved in the chromatographic enantioseparation were elucidated.

Carboxymethyl ß-cyclodextrin as chiral selector in capillary electrophoresis: Enantioseparation of 16 basic chiral drugs and its chiral recognition mechanism associated with drugs' structural features.

Herein we present the enantioseparation of 10 cardiovascular agents and six bronchiectasis drugs including propranolol, carteolol, metoprolol, atenolol, pindolol, esmolol, bisoprolol, bevantolol, arotinolol, sotalol, clenbuterol, procaterol, bambuterol, tranterol, salbutamol and terbutaline sulfate using carboxymethyl-ß-cyclodextrin (CM-ß-CD) as chiral selector. To our knowledge, there is no literature about using CM-ß-CD for separating carteolol, esmolol, bisoprolol, bevantolol, arotinolol, procaterol, bambuterol and tranterol. During the course of work, changes in pH, CM-ß-CD concentration, buffer type and concentration were studied in relation to chiral resolution. Excellent enantiomeric separations were obtained for all 16 compounds, especially for procaterol. An impressive resolution value, up to 17.10, was obtained. In particular, most of them achieved rapid separations within 20 min. Given the fact that enantioseparation results rely on analytes' structural characters, the possible separation mechanisms were discussed. In addition, in order to obtain faster separation for propranolol enantiomers in practical application, the effective length of capillary was innovatively shortened from 45 to 30 cm. After the validation, the method was successfully applied to the enantiomeric purity determination of propranolol in the formulation of drug substances.

In-tube derivatization for determination of absolute configuration and enantiomeric purity of chiral compounds by NMR spectroscopy.

We have developed an in-tube derivatization method using commercially available polymer-supported coupling agents to prepare derivatives of chiral compounds directly in NMR tube with high yield and purity. Because the method does not require any workup or purification, the configuration and enatiopurity can be quickly determined by NMR analysis for a small amount of chiral compounds, which is critical for today's fast-paced medicinal chemistry efforts in drug discovery. The application of the method was demonstrated for the derivatization of chiral amines, alcohols, diols, amino alcohols, thiols, and carboxylic acids using various chiral derivatizing agents and coupling agents. This article also serves as a practical guide for in-tube derivatization and selection of suitable chiral derivatizing agents and coupling agents for various types of chiral compounds. Copyright © 2016 John Wiley & Sons, Ltd.

Phosphated cyclodextrins as water-soluble chiral NMR solvating agents for cationic compounds.

The utility of phosphated α-, ß- and γ-cyclodextrins as water-soluble chiral NMR solvating agents for cationic substrates is described. Two sets of phosphated cyclodextrins, one with degrees of substitution in the 2-6 range, the other with degrees of substitution in the 6-10 range, are examined. Results with 33 water-soluble cationic substrates are reported. We also explored the possibility that the addition of paramagnetic lanthanide ions such as praseodymium(III) and ytterbium(III) further enhances the enantiomeric differentiation in the NMR spectra. The chiral differentiation with the phosphated cyclodextrins is compared to prior results obtained with anionic carboxymethylated cyclodextrins. There are a number of examples where a larger differentiation is observed with the phosphated cyclodextrins.

Design of Selenium-Based Chiral Chemical Probes for Simultaneous Enantio- and Chemosensing of Chiral Carboxylic Acids with Remote Stereogenic Centers by NMR Spectroscopy.

Selenium-based enantiopure chiral chemical probes have been designed in a modular way starting from available amino alcohols. The probes developed were found to be efficient in chemoselective interaction with carboxylic functions of chiral substrates leading to diastereomeric amide formation and in sensing α-, ß-, and remote (up to seven bonds away from the carboxylic group) chiral centers by using 77 Se NMR spectroscopy. As a result, it was possible to determine the enantiomeric ratio of structurally diverse individual chiral acids including polyfunctional compounds and drugs with high accuracy. An approach to analyzing the crude reaction mixtures has been successfully developed by using bifunctional selenium- and fluorine-containing chiral probes. More importantly, it was revealed that, based on the 77 Se NMR data obtained, it is possible to obtain primary information about the location and nature of the substituents at the chiral center (chemo- and enantiosensing), which can simplify the structural elucidation of complex compounds. The derivatization procedure takes as little as 5 min and can be performed directly in an NMR tube followed by NMR measurements without any isolation and purification steps.

Simple Isocratic HPLC Method for Determination of Enantiomeric Impurity in Besifloxacin Hydrochloride.

Besifloxacin is a unique chiral broad-spectrum flouroquinolone used in the treatment of bacterial conjunctivitis. R-form of besifloxacin hydrochloride shows higher antibacterial activity as compared to the S-isomer. Therefore, it is necessary to establish chiral purity. To establish chiral purity a high-performance liquid chromatography (HPLC) method for determination of R-besifloxacin and S-besifloxacin (BES impurity A) was developed and validated for in-process quality control and stability studies. The analytical performance parameters such as linearity, precision, accuracy, specificity, limit of detection (LOD), and lower limit of quantification (LOQ) were determined according to International Council for Harmonization ICH Q2(R1) guidelines. HPLC separation was achieved on Chiralpak AD-H (250 x 4.6 mm, 5 µm) column using n-heptane: ethanol: ethylenediamine: acetic acid (800:200:0.5:0.5) (v/v/v/v) as the mobile phase in an isocratic elution. The eluents were monitored by UV/Visible detector at 290 nm. The resolution between S-isomer and besifloxacin hydrochloride was more than 2.0. Based on a signal-to-noise ratio of 3 and 10 the LOD of besifloxacin was 0.30 µg/mL, while the LOQ was 0.90 µg/mL. The calibration curves were linear in the range of 0.9-7.5 µg/mL. Precision of the method was established within the acceptable range. The method was suitable for the quality control enantiomeric impurity in besifloxacin hydrochloride. Chirality 28:628-632, 2016. © 2016 Wiley Periodicals, Inc.

Specific Optical Rotations and the Horeau Effect.

The observation of nonequivalence of optical and enantiomeric purities, referred to as the Horeau effect, is thought to arise from molecular aggregation in liquid solutions. Although this effect was first observed in 1969, the conditions under which this effect may, or may not, be observable are not established. Considering the formation of dimers as the simplest form of aggregation, the expressions for specific optical rotations in the presence of homochiral and heterochiral monomer-dimer equilibria are presented. Analysis of these equations indicates that the Horeau effect will not be observable even in the presence of aggregation under either of the following two situations: 1) The specific optical rotation of the monomeric species is equal to that of the dimeric species; 2) The heterochiral equilibrium constant is twice that of the homochiral equilibrium constant.