The cantilever contact-point resin bonded bridge; adhesion 2.0.

AIM: When young patients are congenitally missing anterior teeth, different treatment modalities can be used to complement the dental arch. This article proposes a new treatment modality for the replacement of anterior teeth, the cantilever contact-point resin bonded bridge (CCP-RBB). MATERIALS AND METHODS: In this proof of principle study, CCP-RBB's delivered by one operator were clinically assessed. Patients who were missing maxillary incisors and had suitable intra-oral conditions for a contact-point cantilever RBB were included. Three cases are presented to describe all adhesive steps. This proof of principle clinical study is presented with up to 60 months follow-up of the cantilever contact resin bonded bridges. RESULTS: A total of 19 CCP-RBB's were evaluated after a mean period of 29.8 months. None of the restorations exhibited failure, carious lesions or fractures during the follow-up periods, demonstrating an absence of restoration debonding or the need for repair. CONCLUSION: The new cantilever contact-point resin bonded bridge exhibited an excellent treatment modality without failure or debonding up to 5 years. More and extended duration in vivo studies are needed to evaluate this new treatment modality. CLINICAL SIGNIFICANCE: In this proof of principle the new cantilever contact-point resin bonded bridge obtained excellent results up to 5 years of clinical follow-up.

The impact of digitization and conventional techniques on the fit of fixed partial dentures FPDs: systematic review and Meta-analysis.

PURPOSE OF THE STUDY: The goal behind this study is to answer the question "In tooth-supported fixed partial dentures (FPDs), does the digital impression techniques compared to fabrications using conventional impression methods improve the marginal and internal fit? BACKGROUND: The incorporation of digital technology in the fabrication of fixed partial dentures (FPDs) has accelerated over the past decade. This study is directed at evaluating the marginal and internal fit of FPDs manufactured using digital approaches compared to conventional techniques. The need for updated data has encouraged this review. MATERIALS AND METHODS: An electronic search was conducted in PubMed, Scopus, Web of Science, and the Grey Database to identify relevant studies. The Modified Methodological Index for Non-Randomized Studies (MINORS) was used to assess the risk of bias in in vitro experiments. The key results of this meta-analysis were the standard mean differences (SMDs) and 95% confidence intervals (CI) of each main variance, marginal fit, and internal fit between the digital and conventional techniques. Additional analyses were performed to assess the significance of three subgroup parameters: method of digitalization, cement spacer thickness, and span length, and their influence on the fit of the FPDs. RESULTS: Based on predefined criteria, of the seven articles included in this systematic review, only five were selected for the quantitative data analysis. The marginal fit results were (P = 0.06; SMD: -1.88; 95% CI: - 3.88, 0.11) (P > 0.05) and the internal fit results were (P = 0.02; SMD: -0.80; 95% CI: - 1.49, - 0.10) (P < 0.05). Regarding the subgroup analyses, the method of digitalization subgroup results were (P = 0.35; SMD: -1.89; 95% CI: - 3.89, 0.11) and (P = 0.80; SMD: -0.80; 95% CI: - 1.49, - 0.11) for marginal and internal fit, respectively. The span length results were (P = 0.10; SMD: -1.89; 95% CI: - 3.89, 0.11) for marginal fit and (P = 0.02; SMD: -0.80; 95% CI: - 1.49, - 0.11) for internal fit. The cement spacer thickness (P = 0.01; SMD: -1.89; 95% CI: - 3.89, 0.11) and (P = 0.04; SMD: -0.80; 95% CI: - 1.49, - 0.11) for marginal and internal fit, respectively. CONCLUSION: Tooth-retained fixed partial dentures FPDs produced by digital scanning and computer-aided design/computer-aided manufacturing (CAD/CAM) systems can significantly enhance the internal fit compared with those manufactured by traditional methods. Intraoral scanners can replace conventional impressions for the fabrication of FPDs because they minimize the operating time and reduce patient pain. Further clinical studies are required to obtain more conclusive results. SYSTEMATIC REVIEW REGISTRATION: This systematic review and meta-analysis was registered in the International Prospective Register of Systematic Reviews (PROSPERO), registration number CRD42021261397.

Survival Rate of 3-unit Fixed Partial Dentures Replacing First Molars: A Retrospective Cohort Study.

Fixed partial dentures (FPDs) made of 12% Au-Pd alloy are covered under Japan's national health insurance system. The survival rate of such 3-unit fixed FPDs remains unknown, however. The purpose of this retrospective study was to assess their survival rate in the replacement of first molars. A total of 140 FPDs were included, and the endpoint was removal of an FPD. During the observation period, 43 FPDs were removed. The FPD survival rate was 70.2% at 10 yr, 58.2% at 15 yr, and 42.1% at 20 yr according to the Kaplan-Meier method. The estimated mean survival period was 19.4 yr. The main reasons for FPD loss were dental caries (27.9%), separation from the abutment tooth (18.6%), and pulpitis (18.6%). Single factor analysis using the log-rank test showed that two factors influenced FPD survival: a smaller gonial angle and deep pockets around the abutment teeth. This effect was not statistically significant in either case, however (p>0.05). The present results suggest that the prevention of caries and of the separation of the dentures from the abutment teeth are important factors in the long-term survival of FPDs.

Randomized clinical trial comparing monolithic and veneered zirconia three-unit posterior fixed partial dentures in a complete digital flow: three-year follow-up.

OBJECTIVES: To evaluate and to compare the clinical performance and survival rate of posterior monolithic and veneered zirconia fixed partial dentures (FPDs). MATERIAL AND METHODS: Sixty 3-unit posterior FPDs were included in the study. The patients were randomly distributed into two groups (n = 30 each) to receive either a monolithic (Zenostar T, Wieland Dental) or veneered zirconia (IPS e.max ZirCAD, Ivoclar Vivadent) FPD. Each patient received only 1 FPD. Tooth preparations were scanned (Trios 3, 3Shape), designed (Dental System 2016, 3 Shape), milled (Zenotec CAM 3.2, Wieland Dental), and cemented with a resin cement. Technical and biological outcomes and periodontal parameters were assessed. Data analysis was made using the Friedman and the Wilcoxon signed-rank tests with the Bonferroni correction and the Mann-Whitney U test. RESULTS: The survival rate at 3 years was 100% for veneered and 90% for monolithic zirconia restorations. Three monolithic zirconia FPDs were lost because of biologic complications. The main complication in the veneered zirconia FPDs was the fracture of the veneering ceramic in 4 of the veneered zirconia FPDs. No fracture of the frameworks was observed in any of the groups. All restorations were assessed as satisfactory after 3 years. No differences in periodontal parameters were observed between the groups. CONCLUSIONS: The results of this study suggest that monolithic zirconia and complete digital flow could be a viable alternative to veneered zirconia in the posterior regions. CLINICAL RELEVANCE: The monolithic zirconia restorations with a digital workflow can be a viable alternative in posterior fixed partial dentures, with good periodontal outcomes. CLINICAL TRIAL REGISTRATION NUMBER: ClinicalTrials.gov (Identifier NCT 04,879,498).

Comparison of marginal and internal fit of three-unit implant-supported fixed prosthetic substructures fabricated using CAD/CAM systems.

OBJECTIVE: This study compared the marginal and internal fit of implant-supported fixed dentures fabricated using CAD/CAM systems. MATERIALS AND METHODS: A lower jaw model representing partial edentulism was produced. Two dental implants were inserted in the area of teeth 35 and 37, onto which cemented abutments were screwed. The model was scanned using a laboratory scanner and transferred to a design software program for substructure fabrication. Sixty substructures were fabricated out of each group for six substructure types (n = 10), cast Co-Cr (control), milling Co-Cr, laser sintering Co-Cr, titanium (Ti), zirconium, and polyetheretherketone (PEEK) substructures. The marginal and internal fit was evaluated using a silicone replica viewed under a stereomicroscope. The data were analyzed using the statistical package program for social sciences (SPSS, Chicago, IL, USA, v. 17) at a significance level of 0.05. Marginal and internal gaps were compared using the one-way ANOVA test and Tukey's post hoc test. The differences between abutment teeth were determined using the independent sample t-test. RESULTS: There was a significant difference in the marginal gap between PEEK and Ti groups (p < 0.05) but no difference between other groups (p > 0.05). There was a significant difference in the internal gap between PEEK, laser sintering Co-Cr, and milling Co-Cr groups (p < 0.05) but no difference between other groups (p > 0.05). The PEEK group had a higher marginal gap than the Ti group and a higher internal gap than the DMLS Co-Cr group (p < 0.05). CONCLUSION: All substructures have a marginal and internal fit within acceptable clinical limits. CLINICAL RELEVANCE: This in vitro study suggests that materials and techniques used in CAD/CAM systems improve the fitting accuracy of implant-supported fixed restorations.

Pulpal and Periapical Status of the Vital Teeth Used as Abutment for Fixed Prosthesis-A Systematic Review and Meta-Analysis.

PURPOSE: This is a systematic review to identify the incidence of pulp necrosis and/or periapical changes among vital teeth which are used as an abutment for crown and fixed partial dentures (FPDs). MATERIALS AND METHODS: Two reviewers independently searched two electronic databases, PubMed and Scopus. The search was complemented from references of included studies and published reviews. Studies published in the English language through January 2021 that had assessed and documented the clinical and radiographic failure of crown or FPD in vital permanent teeth due to pulpal or periapical pathology with a follow-up of at least 12 months were selected. Data screening, data collection and extraction of data was performed. Quality of studies involved was analyzed using the Newcastle-Ottawa Quality Assessment Scale for cohort studies. Meta-analysis was done using random effects model. Publication bias was assessed using funnel plots. RESULTS: Electronic searches provided 10,075 records among which 20 studies were selected for systematic review and 7 studies were selected for meta-analysis. With respect to quality assessment, all the studies involved were considered as high quality as the score in scale ranged between 6 and 9 as per the Newcastle-Ottawa Quality Assessment Scale for cohort studies. The meta-analyses showed that there was no statistically significant difference in the incidence of the loss of pulp vitality or pulp necrosis through clinical and radiographic examination with the follow up period of 5 years: p < 0.001, 95% CI: 0.96-1.00, I2 = 77.84%; 10 years: p < 0.001, 95% CI: 0.88-0.95, I2 = 93.59%; 15 years: p < 0.001, 95% CI: 0.92-0.96, I2 = 94.83%; and 20 years: p < 0.001, 95% CI: 0.94-0.96, I2 = 95.01%. CONCLUSIONS: The meta-analysis revealed clinical and radiographic success rate ranging between 92% to 98% at different follow up periods ranging between 5 years and 20 years. Future high-quality randomized clinical controlled trials with a larger population are required to confirm the evidence as only observational studies were considered in this paper.

Clinical Success of Screw-retained Dental Implants: A Systematic Review.

OBJECTIVE: The objective of the research was to review the literature on clinical evaluation and success of screw-retained dental implants by assessing the marginal bone loss (MBL). METHODS: Online electronic databases such as PubMed/MEDLINE, Google Scholar, and Cochrane Library were searched using appropriate keywords for the last 20 years, dated from January 1, 2000, till August 1, 2021, with a restriction on language. Additional sources like major journals, unpublished studies, conference proceedings, and cross-references were explored. Information curated for data extraction included methodology, population, type of implants used, and duration of follow-up. RESULTS: The PubMed/MEDLINE, Google Scholar, Cochrane Library, and additional sources identified a huge number, out of which 637 search results were screened, out of which 322 were duplicates. The remaining 315 unique studies were screened for the titles and abstracts, and 23 articles were selected for full-text screening. A total of six articles that matched the eligibility criteria were processed for qualitative analysis. CONCLUSION: Despite the uncertain retrievability of screw-retained implant-supported fixed restorations, this treatment option in fixed implant prosthodontics is a reliable and effective choice, especially for implant-supported long-span fixed partial dentures (FPDs), full-arch FPDs, and cantilever FPDs.

Success of fixed partial denture prostheses observed in a military dental centre: A cross-sectional study.

Background: Fixed dental prostheses have been provided in the Armed Forces for a long time, yet definite evidence-based guidelines on the success and failure of different types of prostheses are currently lacking. A cross-sectional observational study was conducted as a step towards addressing this lacuna. Methods: The study included 156 patients and 538 prostheses based on pre-established inclusion criteria. The types of prostheses that were evaluated included crowns, fixed partial dentures (FPDs), post and core restorations, dental implants and veneers. Visual, tactile and radiographic examination was used for evaluating the prostheses. Success, survival and failure of prostheses were evaluated, and the types of complications leading to the failure were also recorded. In addition, the oral hygiene status of the included patients was also evaluated using the Oral Hygiene Index-Simplified. Results: The overall failure rate in all prostheses combined together was 28.81%. The failure rate in cantilever FPDs was the highest at 44.44%. It was 16.67% in veneers, 35.37% in conventional FPDs, 23.81% in single crowns and 30.56% in all post and core restorations. Conclusion: Barring the all-ceramic prostheses and fibre post and core restorations, the rate of occurrence of both complications and failures in the remaining categories of prostheses was higher than that mentioned in the literature.

Prospective Clinical Evaluation of Posterior Monolithic Zirconia Fixed Partial Dentures Using a Complete Digital Workflow: Two-Year Follow-Up.

PURPOSE: To evaluate the clinical performance and survival rate of posterior monolithic zirconia fixed partial dentures over a 2-year period. MATERIAL AND METHODS: A total of 20 patients, requiring 20 posterior fixed partial dentures were included in the study. Tooth preparations were scanned, and restorations were milled and cemented with a resin cement. The restorations were assessed for the quality of the surface and the color, anatomical form and marginal integrity. Periodontal status was assessed by determining the plaque index, gingival index, pocket depth, and margin index of the abutment teeth. Data were statistically analyzed using the Friedman and the Wilcoxon signed-rank tests with the Bonferroni correction. RESULTS: The survival rate at 2 years was 100%, and no biological or technical complications were observed. All restorations were assessed as satisfactory. The results obtained for gingival index and plaque index were better at 2 years follow-up, than at baseline. The margin index remained stable throughout the follow-up period. No differences in periodontal parameters were observed between abutment and control teeth. CONCLUSIONS: The high survival rate after 2 years suggest that monolithic zirconia may be an acceptable alternative to metal-ceramic and veneered zirconia restorations in the posterior region. Additional long-term, controlled studies are necessary to confirm the results.

10-Year Clinical Comparative Study of Ceramic and Composite Veneered Metal Crowns.

The rejection of composite veneerings in fixed partial dentures is primarily caused by the inadequacy of the bonds between the metal framework and the composite veneering. The development of improved veneering composites necessitates an investigation of their clinical suitability compared with ceramic materials. Nineteen patients with at least two suitable, adjacent natural teeth for crowning were treated with 64 high noble alloy crowns. The adjacent crowns were veneered with ceramic (IPS inline) and composite materials (SR Adoro). Seven follow-up examinations were carried out over a period of 10 years. The crowns were investigated for mechanical defects, periodontal parameters, and discolorations. The survival rates of the ceramic veneered metal crowns (CeMCs) and composite veneered metal crowns (CoMCs) at the 10-year follow-up were 87.1 and 87.9%, respectively. The success rates of the crowns after 10 years were 83.9% for CeMCs and 51.5% for CoMCs (log-rank test, p = 0.009). No significant differences between the groups were found in the periodontal parameters (Kruskal-Wallis one-way analysis of variance, ANOVA p ⟩ 0.05). After 10 years, discoloration patterns of the two materials differed significantly (Mann-Whitney-U-test, p = 0.017). Thus, despite the improvements associated with CoMCs, CeMCs remain the gold standard for veneered metal crowns.

Fiber reinforced composite supported restoration of congenitally missing tooth by minimally invasive approach: Two years follow-up.

Maxillary lateral incisor is the most frequent congenitally missing anterior tooth of the permanent dentition. The absence of the anterior tooth can adversely affect the production/transmission of speech sounds, mental health, and facial aesthetics of an individual. Considering this, prosthetic rehabilitation of missing front tooth is important. The treatment alternatives include implant supported single crown, conventional fixed partial dentures (FPDs), and resin bonded FPDs that are unilaterally or bilaterally supported by metallic wings. However, with the development in adhesive dentistry fiber reinforced composite (FRC) supported FPDs have provided a workable substitute for traditional techniques because of their improved esthetics, minimal invasiveness, less cost, enhanced bond strength, and revocable nature. The current case, reports the two years follow up of twenty-four years old female patient, for whom the congenitally absent maxillary right lateral incisor was restored with FRC supported FPD.

Influence of contemporary CAD-CAM milling systems on the fit and adaptation of partially stabilized Zirconia fixed partial dentures.

OBJECTIVE: To evaluate marginal fit and internal adaptation of three-unit Zr frameworks fabricated from four Zr CAD/CAM milling systems. METHODS: Fixed partial denture models were replicated (40 stone models) using Polyvinyl Siloxane impression material (PVS) and type IV stone for Zr framework fabrication. FPDs were milled with four CAD/CAM systems, Group-II: LAVAL Zirconia milled by LAVA , Group-2: Vita In-Ceram YZ milled by Cerec®, Group-3: Zirconia milled by GM1000 and Group-4: Zirconia milled by DWX-50N. Twelve marginal gap measurements per framework were performed at pre-established points, with a metallurgical microscope (Zeiss, Germany) at 500X magnification. Eight measurements of cement space per section were performed for adaptation. Data was analyzed using ANOVA and Tukey post hoc test. RESULTS: Zirconia FPD frameworks exhibited gaps ranging from 16 to 50.1 µm for marginal fit and 26.8 to 102.5 µm for internal adaptation. Group-3 [20.8 (8.3) µm & 50.3 (11.4) µm] and Group-4 [16.0 (4.0) µm & 40.2 (8.8) µm] specimens showed significantly lower marginal fit and internal adaptation gaps compared to Group-I [50.1 (13.4) µm & 100.5 (16.7) µm] and Group-2 [38.9 (8.2) µm & 102.5 (13.4) µm] specimens respectively. CONCLUSIONS: Different CAD-CAM systems for fabrication of Zr FPD frameworks displayed a significant influence on marginal fit and internal adaptation of restorations.

[Influence of morphological parameters of natural teeth and fixed partial dentures supported by dental implants on the time of occlusion]. / Vliyanie morfologicheskikh parametrov estestvennykh zubov i nes"emnykh ortopedicheskikh konstruktsii s oporoi na dental'nye implantaty na vremya okklyuzii.

OBJECTIVE: To study the effect of morphological parameters of natural teeth and fixed partial dentures supported by dental implants on the time of occlusion. MATERIAL AND METHODS: The study of the morphological parameters of the first right upper and lower molars of natural teeth and fixed partial dentures supported by dental implants in the positions of the first molars of the upper and lower jaws, followed by determination of the relationship between the obtained data and the occlusion time using mathematical and statistical analysis. RESULTS: The study of the morphology of the occlusal surface of natural teeth and fixed partial dentures supported by dental implants did not reveal significant differences in the results of measuring the distances between the cusps of the upper and lower first molars, both natural teeth and fixed partial dentures supported by dental implants. However, the angles of the slopes of the cusps and the angles between cusps in natural teeth are sharper than those of artificial crowns. CONCLUSION: According to the correlation analysis in both groups, the relationship between the occlusion time and the morphological parameters of the lower molars was determined; the relationship between the morphological parameters of the upper molars and the occlusion time was not revealed.

Periodontal regeneration versus extraction and dental implant or prosthetic replacement of teeth severely compromised by attachment loss to the apex: A randomized controlled clinical trial reporting 10-year outcomes, survival analysis and mean cumulative cost of recurrence.

BACKGROUND: Periodontal regeneration can change tooth prognosis and represents an alternative to extraction in teeth compromised by severe intra-bony defects. The aim of this study was to compare periodontal regeneration (PR) with tooth extraction and replacement (TER) in a population with attachment loss to or beyond the apex of the root in terms of professional, patient-reported and economic outcomes. METHODS: This was a 10-year randomized controlled clinical trial. 50 stage III or stage IV periodontitis subjects with a severely compromised tooth with attachment loss to or beyond the apex were randomized to PR or TER with either an implant- or a tooth-supported fixed partial denture. Subjects were kept on a strict periodontal supportive care regimen every 3 months and examined yearly. Survival and recurrence analysis were performed. RESULTS: 88% and 100% survival rates were observed in the PR and TER groups. Complication-free survival was not significantly different: 6.7-9.1 years for PR and 7.3-9.1 years for TER (p = .788). In PR, the observed 10-year attachment gain was 7.3 ± 2.3 mm and the residual probing depths were 3.4 ± 0.8 mm. Recurrence analysis showed that the 95% confidence interval of the costs was significantly lower for PR compared with TER throughout the whole 10-year period. Patient-reported outcomes and oral health-related quality-of-life measurements improved in both groups. CONCLUSIONS: Periodontal regeneration can change the prognosis of hopeless teeth and is a less costly alternative to tooth extraction and replacement. The complexity of the treatment limits widespread application to the most complex cases but provides powerful proof of principle for the benefits of PR in deep intra-bony defect.

Cytomorphometric Analysis of Inflammation Dynamics in the Periodontium Following the Use of Fixed Dental Prostheses.

Cytomorphometry is used in the sampling of biological materials and diagnostic procedures. The use of cytological studies in periodontal diseases is not well described in the literature. Our study aimed to quantitatively assess the inflammation dynamics using cytomorphometric analysis of the periodontium before and after the use of fixed dental prostheses. Following ethics approval, a total of 105 subjects were divided in 3 groups as gingivitis (n = 23), periodontitis (n = 58), and healthy periodontium (control) (n = 24). The fixed dental prostheses (crowns and fixed partial dentures) were fabricated from cobalt-chrome metal-ceramic prostheses using the conventional method (C/M-CoCr), cobalt-chrome metal-ceramic prostheses by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (C/C-CoCr), and zirconia-based ceramic prostheses by the CAD/CAM technique (C/C-Zr) among subjects with gingivitis and periodontitis. The gingival crevicular fluid (GCF) was obtained from subjects before and after the use of the prostheses. The total count of epithelial cells and the connective tissue cells or polymorphonuclear neutrophils (PMNs) in GCF were studied using cytomorphometric analysis. The Statistical Package Tor the Social Sciences (SPSS), Version 20 (IBM Company, Chicago, IL, USA) was used to analyze the results and the significance level was set at p = 0.05. The data for before and after the use of the prostheses were compared using independent t-Tests. Similarly, the results after the use of prostheses in gingivitis, periodontitis, and control in each type of prostheses were compared using One-way ANOVA with post hoc using Scheffe. The total epithelial cells and the PMNs were determined along with the epithelium/leukocyte index. Regardless of the prostheses type used, no significant change in the parameters was identified among patients with a healthy periodontium, before and after prosthetic treatment. In all study groups, a statistically increase (p value < 0.05) was observed in the oral epithelial cell counts and a statistically decrease (p < 0.05) in the PMNs count following the use of the fixed prostheses. Data on cytomorphometric analysis could enable the selection of the most appropriate prostheses for use in patients with periodontal pathologies. When choosing prostheses, changes in the composition of GCF could be considered as a useful criterion for their use.

Influence of Different Implants on the Biomechanical Behavior of a Tooth-Implant Fixed Partial Dentures: A Three-Dimensional Finite Element Analysis.

This study analyzed the biomechanical behavior of rigid and nonrigid tooth-implant supported fixed partial dentures. Different implants were used to observe the load distribution over teeth, implants, and adjacent bone using three-dimensional finite element analysis. A simulation of tooth loss of the first and second right molars was created with an implant placed in the second right molar and a prepared tooth with simulated periodontal ligament (PDL) in the second right premolar. Configurations of two types of implants and their respective abutments-external hexagon (EX) and Morse taper (MT)-were transformed into a 3D format. Metal-ceramic fixed partial dentures were constructed with rigid and nonrigid connections. Mesh generation and data processing were performed on the 3D finite element analysis (FEA) results. Static loading of 50 N (premolar) and 100 N (implant) were applied. When an EX implant was used, with a rigid or nonrigid connection, there was intrusion of the tooth in the distal direction with flexion of the periodontal ligament. Tooth intrusion did not occur when the MT implant was used independent of a rigid or nonrigid connection. The rigid or nonrigid connection resulted in a higher incidence of compressive forces at the cortical bone as well as stress in the abutment/pontic area, regardless of whether EX or MT implants were used. MT implants have a superior biomechanical performance in tooth-implant supported fixed partial dentures. This prevents intrusion of the tooth independent of the connection. Both types of implants studied caused a greater tendency of compressive forces at the crestal area.

Unique, Cost-effective and Retentive Removable Prosthesis to Rehabilitate Long Span Kennedy's Class I Edentulism with Custom Attachment System: A Case Report.

AIM: This case report describes about a distinctive custom-made attachment on the abutment teeth to improve the retention and stability of the removable partial denture (RPD). It also throws light on the cost-effective method for altering the abutment teeth with the aid of the crowns and custom-made attachments. BACKGROUND: Achieving retention in Kennedy's class I bilateral edentulism usually affects the abutment teeth's periodontal health and eventually the retention is compromised. Distal extension edentulism also affects patient's masticatory efficiency. The rehabilitation of a patient with the long span Kennedy's class I condition complicates the problem because of the unavailability of enough abutments to support the prosthesis. Conventional removable prosthesis with clasps and cantilever fixed partial prosthesis are not advisable in this situation for the same reason. CASE DESCRIPTION: A case with Kennedy's class I modification 1 partially edentulous arch with 1st and 2nd molars missing along with central incisors was rehabilitated with an inexpensive custom attachment using die pin and sleeve for giving a fixed prosthesis on abutment teeth and removable prosthesis with missing teeth. CONCLUSION: This technique has advantages of retention better than conventional RPDs, protection of abutment health by restoring it with crown, easy to place and remove and very cost-effective. CLINICAL SIGNIFICANCE: The entire technique demands less skill compared to semi precision and precision attachments.

Prosthetic dental restorations in Swedish samples: prevalence and agreement between self-report, clinical findings, and influence on quality of life.

OBJECTIVE: To determine the prevalence of dental prosthetic restorations in an adult population, to study the agreement between self-reports and clinical findings of prosthetic restorations, and to study answers from a questionnaire in relation to the prevalence of prosthetic restorations. MATERIAL AND METHODS: A questionnaire was sent to a sample of 10,000 adults. A further sample of 1000 individuals was invited to answer the questionnaire and also participate in a clinical study. The agreement between self-report and clinical findings was analyzed, as were the associations between prosthetic restorations and questionnaire responses, using the chi2 test. RESULTS: A total of 40% of the sample had fixed dental prostheses (FDP), 2.7% had removable dentures. The agreement between self-report and clinical findings was 93%. 34.7% of the individuals with no prosthetic restorations were university graduates and 4% of individuals with removable complete dentures. Oral health had the greatest impact on the quality of life of younger individuals with FDP, with an OHIP-14 (Oral Health Impact Profile) score of 7.3 for the age group 20-39 years compared to 4.9 for the age group 65-89 years. CONCLUSION: The questionnaire method can be a cost-effective way to determine the prevalence of prosthetic restorations.

Agenesis of a maxillary lateral incisor associated with bilateral canine inclusions: A noninvasive multidisciplinary approach.

OBJECTIVE: The treatment of congenitally missing maxillary lateral incisors is often complex and requires a multidisciplinary approach, which demands continuous collaboration among the different specialists involved in the rehabilitation. In young patients, implant therapy or the preparation of intact teeth for fixed prostheses is not indicated. CLINICAL CONSIDERATIONS: Two complex cases of double maxillary canine inclusion were treated with combined surgical, orthodontic, and conservative prosthetic treatments. Orthodontic therapy allowed the creation of the necessary interocclusal space to fabricate the all-ceramic resin-bonded fixed partial dentures without the preparation of the abutment teeth. CONCLUSIONS: Carefully planned and meticulously executed orthodontic and prosthetic therapies allowed for a noninvasive rehabilitation of patients with maxillary lateral incisor agenesis. CLINICAL SIGNIFICANCE: This article provides clinicians with a noninvasive solution for agenesis of lateral incisors associated with canine inclusions. Indications for the choice of material of all-ceramic resin-bonded fixed partial dentures are discussed and presented.

Direct Fiber-Reinforced Interim Fixed Partial Dentures: Six-Year Survival Study.

PURPOSE: Mechanical and optical studies of glass fiber composites have revealed great resistance and satisfactory bonds between the glass fibers and composite resins. This study aimed to evaluate the long-term survival of anterior and posterior direct glass fiber-reinforced composite (FRC) fixed partial dentures (FPD). MATERIALS AND METHODS: Twenty-three patients (9 men, 14 women) aged 18 to 67 received 23 d-FRC-FPDs. The frameworks of the FPDs were unidirectional pre-impregnated glass fibers (ever Stick C&B). The retainers were inlay composite resin retainers (n1 = 19) and composite resin wings (n2 = 4). The FPD that used inlay retainers and composite resin wing retainers was called the hybrid design. The mean follow-up period was 4.91 years with 12-month check-ups performed by two independent operators. The survival rates of the glass fiber FPDs were determined. RESULTS: Six-year survival rates for the two types of FPDs were 94.7% for the inlay retainer type versus 25% for the hybrid type, with a statistically significant difference (log-rank test χ2 (1) = 11.422, p = 0.001). The inlay retainers were functional, with only one patient with a fracture line in the connector held by the glass fibers. Kaplan-Meier survival curves were drawn to show the difference between the two types of retainers. CONCLUSION: According to the results of this study, these long-term interim FRC-FPD were resistant enough to allow mastication, minimally invasive and also esthetic, with inlay composite retainers as the better solution.